blob: c60d0aed396a114f58ec7bd4189a1d1347d604a8 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
|
Summary of CLI commands, expanded for Opaque-LSA/MPLS-TE.
---------------------------------------------------------
router>
show ip ospf database (asbr-summary|external|max-age|network|router|self-originate|summary|opaque-link|opaque-area|opaque-external)
show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) (self-originate|)
show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D
show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D (self-originate|)
show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D adv-router A.B.C.D
show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) adv-router A.B.C.D
--> Add database items: opaque-link, opaque-area, opaque-external
show mpls-te interface [INTERFACE]
--> Show current MPLS-TE link-TLV parameters.
If [INTERFACE] is omitted, all interfaces will be displayed.
show mpls-te router
--> Show current MPLS-TE Router-TLV parameters.
router> enable
router#
router# configure terminal
router(config)# interface [INTERFACE]
router(config-if)#
mpls-te link max-bw BANDWIDTH
--> Set MPLS-TE link-TLV parameter: Maximum Bandwidth (Bytes/sec).
In integer or floating point format (1000, or 1.0e3)
mpls-te link max-rsv-bw BANDWIDTH
--> Set MPLS-TE link-TLV parameter: Maximum Reservable Bandwidth (Bytes/sec).
In integer or floating point format (1000, or 1.0e3)
mpls-te link metric <0-4294967295>
--> Set MPLS-TE link-TLV parameter: MPLS-TE metric.
mpls-te link rsc-clsclr BITPATTERN
--> Set MPLS-TE link-TLV parameter: Resource Class/Color.
In 32-bit hexadecimal format, with leading "0x" (0x0 - 0xffffffff)
mpls-te link unrsv-bw <0-7> BANDWIDTH
--> Set MPLS-TE link-TLV parameter: Unreserved Bandwidth (Bytes/sec).
In integer or floating point format (1000, or 1.0e3)
router(config-if)# exit
router(config)# router ospf
router(config-router)#
mpls-te
--> Enable MPLS-TE functionality.
Note that master-switch "ospf opaque-lsa" must also be specified.
mpls-te on
--> Alias of "mpls-te" command.
mpls-te router-address A.B.C.D
--> Set MPLS-TE Router-TLV parameter: Router Address.
no mpls-te
--> Disable MPLS-TE functionality.
no ospf opaque-lsa
--> Disable Opaque-LSAs capability.
This node behaves Opaque-incapable node.
ospf opaque-lsa
--> Enable Opaque-LSAs capability.
This is the master-switch to make this node Opaque-capable.
router# exit
|
