diff options
| author | Rodrigo Benenson <rodrigo.benenson@gmail.com> | 2011-07-11 22:53:33 +0200 |
|---|---|---|
| committer | Rodrigo Benenson <rodrigo.benenson@gmail.com> | 2011-07-11 22:53:33 +0200 |
| commit | cd5a0b6dfed3930e6aec6337d859300c8aa1796b (patch) | |
| tree | 5cd0dfa4b133928f40f2aa13cf580e3610a57e82 | |
| parent | 7e9e449972d756a3fa09d014d8e9194f5ebc6f2c (diff) | |
Fixing some typos
| -rw-r--r-- | README | 7 |
1 files changed, 3 insertions, 4 deletions
@@ -51,7 +51,7 @@ follow the sanguino's readme so that your arduino hardware folder looks like 4. Clone the Sprinter git repository.
git clone https://github.com/kliment/Sprinter.git
-Optionally, swicht to the desired branch
+Optionally, switch to the desired branch
git branch -a
git checkout THE_BRANCH_YOU_WANT
@@ -61,7 +61,7 @@ Firmware compilation and upload 5. Edit INSTALL_DIR inside Sprinter/Makefile (do not mind the default reference to arduino 0022)
6. Run make. If everything goes well Sprinter/applet/Sprinter.cpp should have been created.
-You can safelly ignore the error message mentioning arduino-0018/hardware/arduino/cores/arduino/WString.o
+You can safely ignore the error message mentioning arduino-0018/hardware/arduino/cores/arduino/WString.o
7. Connect your Sanguinololu to your computer
http://reprap.org/wiki/Sanguinololu
@@ -94,7 +94,7 @@ If everything goes well you should see the message "Done uploading". Congratulations, you have just upgraded the firmware of your RepRap !
-You can use the pronterface to do some manual verifications by moving the printer's tip along
+You can use pronterface.py to do some manual verifications by moving the printer's tip along
the axes and verifying that the physical displacements match the ones indicated on the interface.
@@ -104,4 +104,3 @@ the axes and verifying that the physical displacements match the ones indicated -
|