Fixing issues in pins.h and fastio.h, I created them not understanding it was using arduino pin numbers

I also put in a note that Gen 7 only works at 16 MHZ due to timing issues with WProgram.h and wiring.h

3 files changed, 25 insertions, 72 deletions

diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h
index 2a57812..344a7bd 100644
--- a/Sprinter/Configuration.h
+++ b/Sprinter/Configuration.h
@@ -9,7 +9,7 @@
 // Gen6 = 5, 
 // Sanguinololu up to 1.1 = 6
 // Sanguinololu 1.2 and above = 62
-// Gen 7 = 7
+// Gen 7 @ 16MHZ only= 7
 // Teensylu (at90usb) = 8
 // Gen 3 Plus = 21
 // gen 3  Monolithic Electronics = 22
diff --git a/Sprinter/fastio.h b/Sprinter/fastio.h
index 5f1f5d1..6b5572a 100644
--- a/Sprinter/fastio.h
+++ b/Sprinter/fastio.h
@@ -625,54 +625,6 @@ pins
 #define DIO31_DDR		DDRA
 #define DIO31_PWM		NULL
 
-#define DIO33_PIN               PINA7
-#define DIO33_RPORT     PINA
-#define DIO33_WPORT     PORTA
-#define DIO33_DDR               DDRA
-#define DIO33_PWM               NULL
-
-#define DIO34_PIN               PINA6
-#define DIO34_RPORT     PINA
-#define DIO34_WPORT     PORTA
-#define DIO34_DDR               DDRA
-#define DIO34_PWM               NULL
-
-#define DIO35_PIN               PINA5
-#define DIO35_RPORT     PINA
-#define DIO35_WPORT     PORTA
-#define DIO35_DDR               DDRA
-#define DIO35_PWM               NULL
-
-#define DIO36_PIN               PINA4
-#define DIO36_RPORT     PINA
-#define DIO36_WPORT     PORTA
-#define DIO36_DDR               DDRA
-#define DIO36_PWM               NULL
-
-#define DIO37_PIN               PINA3
-#define DIO37_RPORT     PINA
-#define DIO37_WPORT     PORTA
-#define DIO37_DDR               DDRA
-#define DIO37_PWM               NULL
-
-#define DIO38_PIN               PINA2
-#define DIO38_RPORT     PINA
-#define DIO38_WPORT     PORTA
-#define DIO38_DDR               DDRA
-#define DIO38_PWM               NULL
-
-#define DIO39_PIN               PINA1
-#define DIO39_RPORT     PINA
-#define DIO39_WPORT     PORTA
-#define DIO39_DDR               DDRA
-#define DIO39_PWM               NULL
-
-#define DIO40_PIN               PINA0
-#define DIO40_RPORT     PINA
-#define DIO40_WPORT     PORTA
-#define DIO40_DDR               DDRA
-#define DIO40_PWM               NULL
-
 #define AIO0_PIN		PINA0
 #define AIO0_RPORT	PINA
 #define AIO0_WPORT	PORTA
diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index 01f29ed..63719f4 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -686,6 +686,7 @@
 
 #endif
 
+
 /****************************************************************************************
 * Gen7 pin assignment
 *
@@ -693,46 +694,46 @@
 #if MOTHERBOARD == 7
 #define KNOWN_BOARD 1
 
-#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) && !defined(__AVR_ATmega644__) 
+#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) 
     #error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
 #endif
 
 //x axis pins
-    #define X_STEP_PIN      15
+    #define X_STEP_PIN      19
     #define X_DIR_PIN       18
-    #define X_ENABLE_PIN    33
-    #define X_MIN_PIN       8
-    #define X_MAX_PIN       7
+    #define X_ENABLE_PIN    -1
+    #define X_MIN_PIN       7
+    #define X_MAX_PIN       6
 
     //y axis pins
-    #define Y_STEP_PIN      29
-    #define Y_DIR_PIN       28
-    #define Y_ENABLE_PIN    33
-    #define Y_MIN_PIN       3
-    #define Y_MAX_PIN       6
+    #define Y_STEP_PIN      23
+    #define Y_DIR_PIN       22
+    #define Y_ENABLE_PIN    -1
+    #define Y_MIN_PIN       5
+    #define Y_MAX_PIN       2
 
     //z axis pins
-    #define Z_STEP_PIN      35
-    #define Z_DIR_PIN       34
-    #define Z_ENABLE_PIN    33
-    #define Z_MIN_PIN       2
-    #define Z_MAX_PIN       1
+    #define Z_STEP_PIN      26
+    #define Z_DIR_PIN       25
+    #define Z_ENABLE_PIN    24
+    #define Z_MIN_PIN       1
+    #define Z_MAX_PIN       0
 
     //extruder pins
-    #define E_STEP_PIN      37     
-    #define E_DIR_PIN       36     
-    #define E_ENABLE_PIN    33     
-    #define TEMP_0_PIN      39    // Extruder 
-    #define HEATER_0_PIN     5    // Extruder
-    #define HEATER_1_PIN     4    // Bed
+    #define E_STEP_PIN      28     
+    #define E_DIR_PIN       27     
+    #define E_ENABLE_PIN    -1     
+    #define TEMP_0_PIN      1    // Extruder 
+    #define HEATER_0_PIN     4    // Extruder
+    #define HEATER_1_PIN     3    // Bed
 
 
     #define SDPOWER         -1
     #define SDSS            -1
     #define LED_PIN         -1    
-    #define TEMP_1_PIN      38    //Bed   
+    #define TEMP_1_PIN      2    //Bed   
     #define FAN_PIN         -1    
-    #define PS_ON_PIN       21    
+    #define PS_ON_PIN       15    
 
 #endif