diff options
| author | kliment <kliment.yanev@gmail.com> | 2012-07-10 09:57:05 -0700 |
|---|---|---|
| committer | kliment <kliment.yanev@gmail.com> | 2012-07-10 09:57:05 -0700 |
| commit | 9fe56bac47bb01f5412e12ed31a3d74b31b29040 (patch) | |
| tree | ba5a01ab1f6e62b555b351f85adfd56774087d0b /Sprinter | |
| parent | d98317e2136c9b61a68b83fee8af863980cdb3bb (diff) | |
| parent | 982796f9f023ca158593a52348224ec3faf99a84 (diff) | |
Merge pull request #198 from blddk/experimental
Synchronize before certain commands are executed if chain of command is defined
Diffstat (limited to 'Sprinter')
| -rw-r--r-- | Sprinter/Configuration.h | 2 | ||||
| -rw-r--r-- | Sprinter/Sprinter.pde | 23 |
2 files changed, 24 insertions, 1 deletions
diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h index f5a5730..aca24e1 100644 --- a/Sprinter/Configuration.h +++ b/Sprinter/Configuration.h @@ -369,6 +369,8 @@ const int dropsegments=5; //everything with less than this number of steps will //#define EXTRUDERFAN_PIN 66 //Pin used to control the fan, comment out to disable this function #define EXTRUDERFAN_DEC 50 //Hotend temperature from where the fan will be turned on +//#define CHAIN_OF_COMMAND 1 //Finish buffered moves before executing M42, fan speed, heater target, and so... + //----------------------------------------------------------------------- // DEBUGING //----------------------------------------------------------------------- diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde index cc0ed44..3620030 100644 --- a/Sprinter/Sprinter.pde +++ b/Sprinter/Sprinter.pde @@ -1421,6 +1421,9 @@ FORCE_INLINE void process_commands() case 42: //M42 -Change pin status via gcode if (code_seen('S')) { +#ifdef CHAIN_OF_COMMAND + st_synchronize(); // wait for all movements to finish +#endif int pin_status = code_value(); if (code_seen('P') && pin_status >= 0 && pin_status <= 255) { @@ -1444,6 +1447,9 @@ FORCE_INLINE void process_commands() } break; case 104: // M104 +#ifdef CHAIN_OF_COMMAND + st_synchronize(); // wait for all movements to finish +#endif if (code_seen('S')) target_raw = temp2analogh(target_temp = code_value()); #ifdef WATCHPERIOD if(target_raw > current_raw) @@ -1458,6 +1464,9 @@ FORCE_INLINE void process_commands() #endif break; case 140: // M140 set bed temp +#ifdef CHAIN_OF_COMMAND + st_synchronize(); // wait for all movements to finish +#endif #if TEMP_1_PIN > -1 || defined BED_USES_AD595 if (code_seen('S')) target_bed_raw = temp2analogBed(code_value()); #endif @@ -1500,6 +1509,9 @@ FORCE_INLINE void process_commands() return; //break; case 109: { // M109 - Wait for extruder heater to reach target. +#ifdef CHAIN_OF_COMMAND + st_synchronize(); // wait for all movements to finish +#endif if (code_seen('S')) target_raw = temp2analogh(target_temp = code_value()); #ifdef WATCHPERIOD if(target_raw>current_raw) @@ -1550,6 +1562,9 @@ FORCE_INLINE void process_commands() } break; case 190: // M190 - Wait for bed heater to reach target temperature. +#ifdef CHAIN_OF_COMMAND + st_synchronize(); // wait for all movements to finish +#endif #if TEMP_1_PIN > -1 if (code_seen('S')) target_bed_raw = temp2analogBed(code_value()); codenum = millis(); @@ -1573,6 +1588,9 @@ FORCE_INLINE void process_commands() break; #if FAN_PIN > -1 case 106: //M106 Fan On +#ifdef CHAIN_OF_COMMAND + st_synchronize(); // wait for all movements to finish +#endif if (code_seen('S')) { unsigned char l_fan_code_val = constrain(code_value(),0,255); @@ -1627,6 +1645,9 @@ FORCE_INLINE void process_commands() SET_OUTPUT(PS_ON_PIN); //GND break; case 81: // M81 - ATX Power Off +#ifdef CHAIN_OF_COMMAND + st_synchronize(); // wait for all movements to finish +#endif SET_INPUT(PS_ON_PIN); //Floating break; #endif @@ -3508,4 +3529,4 @@ void log_ulong_array(char* message, unsigned long value[], int array_lenght) { } Serial.println("}"); } -#endif +#endif
\ No newline at end of file |