diff options
| -rw-r--r-- | Tonokip_Firmware/pins.h | 215 |
1 files changed, 106 insertions, 109 deletions
diff --git a/Tonokip_Firmware/pins.h b/Tonokip_Firmware/pins.h index a585233..a137593 100644 --- a/Tonokip_Firmware/pins.h +++ b/Tonokip_Firmware/pins.h @@ -27,35 +27,35 @@ #error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu. #endif -#define X_STEP_PIN (byte)2 -#define X_DIR_PIN (byte)3 -#define X_ENABLE_PIN (byte)-1 -#define X_MIN_PIN (byte)4 -#define X_MAX_PIN (byte)9 +#define X_STEP_PIN 2 +#define X_DIR_PIN 3 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN 4 +#define X_MAX_PIN 9 -#define Y_STEP_PIN (byte)10 -#define Y_DIR_PIN (byte)7 -#define Y_ENABLE_PIN (byte)-1 -#define Y_MIN_PIN (byte)8 -#define Y_MAX_PIN (byte)13 +#define Y_STEP_PIN 10 +#define Y_DIR_PIN 7 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 8 +#define Y_MAX_PIN 13 -#define Z_STEP_PIN (byte)19 -#define Z_DIR_PIN (byte)18 -#define Z_ENABLE_PIN (byte)5 -#define Z_MIN_PIN (byte)17 -#define Z_MAX_PIN (byte)16 +#define Z_STEP_PIN 19 +#define Z_DIR_PIN 18 +#define Z_ENABLE_PIN 5 +#define Z_MIN_PIN 17 +#define Z_MAX_PIN 16 -#define E_STEP_PIN (byte)11 -#define E_DIR_PIN (byte)12 -#define E_ENABLE_PIN (byte)-1 +#define E_STEP_PIN 11 +#define E_DIR_PIN 12 +#define E_ENABLE_PIN -1 -#define LED_PIN (byte)-1 -#define FAN_PIN (byte)-1 -#define PS_ON_PIN (byte)15 -#define KILL_PIN (byte)-1 +#define LED_PIN -1 +#define FAN_PIN -1 +#define PS_ON_PIN 15 +#define KILL_PIN -1 -#define HEATER_0_PIN (byte)6 -#define TEMP_0_PIN (byte)0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_0_PIN 6 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! @@ -96,35 +96,35 @@ #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. #endif -#define X_STEP_PIN (byte)15 -#define X_DIR_PIN (byte)18 -#define X_ENABLE_PIN (byte)19 -#define X_MIN_PIN (byte)20 -#define X_MAX_PIN (byte)21 +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 20 +#define X_MAX_PIN 21 -#define Y_STEP_PIN (byte)23 -#define Y_DIR_PIN (byte)22 -#define Y_ENABLE_PIN (byte)19 -#define Y_MIN_PIN (byte)25 -#define Y_MAX_PIN (byte)26 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 19 +#define Y_MIN_PIN 25 +#define Y_MAX_PIN 26 -#define Z_STEP_PIN (byte)29 -#define Z_DIR_PIN (byte)30 -#define Z_ENABLE_PIN (byte)31 -#define Z_MIN_PIN (byte)2 -#define Z_MAX_PIN (byte)1 +#define Z_STEP_PIN 29 +#define Z_DIR_PIN 30 +#define Z_ENABLE_PIN 31 +#define Z_MIN_PIN 2 +#define Z_MAX_PIN 1 -#define E_STEP_PIN (byte)12 -#define E_DIR_PIN (byte)16 -#define E_ENABLE_PIN (byte)3 +#define E_STEP_PIN 12 +#define E_DIR_PIN 16 +#define E_ENABLE_PIN 3 -#define LED_PIN (byte)0 -#define FAN_PIN (byte)-1 -#define PS_ON_PIN (byte)-1 -#define KILL_PIN (byte)-1 +#define LED_PIN 0 +#define FAN_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 -#define HEATER_0_PIN (byte)14 -#define TEMP_0_PIN (byte)4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_0_PIN 14 +#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ @@ -162,7 +162,7 @@ #define E_STEP_PIN 17 #define E_DIR_PIN 16 -#define E_ENABLE_PIN (byte)-1 +#define E_ENABLE_PIN -1 #define LED_PIN 0 @@ -177,11 +177,11 @@ //pin for controlling the PSU. #define PS_ON_PIN 14 -#define FAN_PIN (byte)-1 -#define KILL_PIN (byte)-1 +#define FAN_PIN -1 +#define KILL_PIN -1 -#define HEATER_0_PIN (byte)-1 -#define TEMP_0_PIN (byte)-1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_0_PIN -1 +#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! @@ -197,35 +197,35 @@ #error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu. #endif -#define X_STEP_PIN (byte)22 -#define X_DIR_PIN (byte)23 -#define X_ENABLE_PIN (byte)24 -#define X_MIN_PIN (byte)2 -#define X_MAX_PIN (byte)3 +#define X_STEP_PIN 22 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 24 +#define X_MIN_PIN 2 +#define X_MAX_PIN 3 -#define Y_STEP_PIN (byte)25 -#define Y_DIR_PIN (byte)26 -#define Y_ENABLE_PIN (byte)27 -#define Y_MIN_PIN (byte)18 -#define Y_MAX_PIN (byte)19 +#define Y_STEP_PIN 25 +#define Y_DIR_PIN 26 +#define Y_ENABLE_PIN 27 +#define Y_MIN_PIN 18 +#define Y_MAX_PIN 19 -#define Z_STEP_PIN (byte)28 -#define Z_DIR_PIN (byte)29 -#define Z_ENABLE_PIN (byte)30 -#define Z_MIN_PIN (byte)20 -#define Z_MAX_PIN (byte)21 +#define Z_STEP_PIN 28 +#define Z_DIR_PIN 29 +#define Z_ENABLE_PIN 30 +#define Z_MIN_PIN 20 +#define Z_MAX_PIN 21 -#define E_STEP_PIN (byte)4 -#define E_DIR_PIN (byte)31 -#define E_ENABLE_PIN (byte)-1 +#define E_STEP_PIN 4 +#define E_DIR_PIN 31 +#define E_ENABLE_PIN -1 -#define LED_PIN (byte)-1 -#define FAN_PIN (byte)-1 -#define PS_ON_PIN (byte)10 -#define KILL_PIN (byte)-1 +#define LED_PIN -1 +#define FAN_PIN -1 +#define PS_ON_PIN 10 +#define KILL_PIN -1 -#define HEATER_0_PIN (byte)6 -#define TEMP_0_PIN (byte)0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define HEATER_0_PIN 6 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! @@ -241,38 +241,35 @@ #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. #endif -#define X_STEP_PIN (byte)19 -#define X_DIR_PIN (byte)18 -#define X_ENABLE_PIN (byte)-1 -#define X_MIN_PIN (byte)17 -#define X_MAX_PIN (byte)-1 - -#define Y_STEP_PIN (byte)10 -#define Y_DIR_PIN (byte)7 -#define Y_ENABLE_PIN (byte)-1 -#define Y_MIN_PIN (byte)8 -#define Y_MAX_PIN (byte)-1 - -#define Z_STEP_PIN (byte)13 -#define Z_DIR_PIN (byte)3 -#define Z_ENABLE_PIN (byte)2 -#define Z_MIN_PIN (byte)4 -#define Z_MAX_PIN (byte)-1 - -//#define BASE_HEATER_PIN (byte)1 -//#define POWER_SUPPLY_PIN (byte)16 - -#define E_STEP_PIN (byte)11 -#define E_DIR_PIN (byte)12 -#define E_ENABLE_PIN (byte)-1 - -#define LED_PIN (byte)-1 -#define FAN_PIN (byte)5 -#define PS_ON_PIN (byte)-1 -#define KILL_PIN (byte)-1 - -#define HEATER_0_PIN (byte)6 -#define TEMP_0_PIN (byte)0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN -1 +#define X_MIN_PIN 17 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 10 +#define Y_DIR_PIN 7 +#define Y_ENABLE_PIN -1 +#define Y_MIN_PIN 8 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 13 +#define Z_DIR_PIN 3 +#define Z_ENABLE_PIN 2 +#define Z_MIN_PIN 4 +#define Z_MAX_PIN -1 + +#define E_STEP_PIN 11 +#define E_DIR_PIN 12 +#define E_ENABLE_PIN -1 + +#define LED_PIN -1 +#define FAN_PIN 5 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#define HEATER_0_PIN 6 +#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! |