diff options
| -rw-r--r-- | README | 14 | ||||
| -rw-r--r-- | Sprinter/pins.h | 30 |
2 files changed, 37 insertions, 7 deletions
@@ -40,17 +40,17 @@ Software installation 1. Install the required packages (gcc-avr, avr-libc, etc.)
sudo apt-get install arduino-core
-2. Get the arduino software version 0018 (0023 works for RAMPS), uncompress it in a directory.
+2. Get the arduino software version 0023, uncompress it in a directory.
Arduino software v1 has not been tested much, but is known to work with some boards.
http://www.arduino.cc/en/Main/Software
-3. Get the sanguino software, version 0018
+3. Get the sanguino software, version 0023
http://sanguino.cc/softwareforlinux
follow the sanguino's readme so that your arduino hardware folder looks like
- arduino-0018/hardware/arduino
- arduino-0018/hardware/sanguino
- arduino-0018/hardware/tools
+ arduino-0023/hardware/arduino
+ arduino-0023/hardware/sanguino
+ arduino-0023/hardware/tools
4. Clone the Sprinter git repository.
git clone https://github.com/kliment/Sprinter.git
@@ -64,12 +64,12 @@ Firmware compilation and upload 5. Edit INSTALL_DIR inside Sprinter/Makefile (do not mind the default reference to arduino 0022)
6. Run make. If everything goes well Sprinter/applet/Sprinter.cpp should have been created.
-You can safely ignore the error message mentioning arduino-0018/hardware/arduino/cores/arduino/WString.o
+You can safely ignore the error message mentioning arduino-0023/hardware/arduino/cores/arduino/WString.o
7. Connect your Sanguinololu to your computer
http://reprap.org/wiki/Sanguinololu
-8. Launch arduino-0018/arduino, open Sprinter/Sprinter.pde
+8. Launch arduino-0023/arduino, open Sprinter/Sprinter.pde
9. Go to Tools -> Serial Port, and select the relevant option
diff --git a/Sprinter/pins.h b/Sprinter/pins.h index 42b1fa1..e2d2f89 100644 --- a/Sprinter/pins.h +++ b/Sprinter/pins.h @@ -96,6 +96,36 @@ * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM * +--------+ * +**************************************************************************************** +* +* ATMega644P (SMD) +* +* +--------+ +* MOSI (D 5) PB5 1| O |44 PB4 (D 4) PWM +* MISO (D 6) PB6 2| |43 PB3 (D 3) PWM +* SCK (D 7) PB7 3| |42 PB2 (D 2) INT2 +* RST 4| |41 PB1 (D 1) +* Vcc 5| |40 PB0 (D 0) +* GND 6| |39 GND +* XTAL2 7| |38 Vcc +* XTAL1 8| |37 PA0 (AI 0 / D31) +* RX0 (D 8) PD0 9| |36 PA1 (AI 1 / D30) +* TX0 (D 9) PD1 10| |35 PA2 (AI 2 / D29) +* INT0 RX1 (D 10) PD2 11| |34 PA3 (AI 3 / D28) +* + + +* INT1 TX1 (D 11) PD3 12| |33 PA4 (AI 4 / D27) +* PWM (D 12) PD4 13| |32 PA5 (AI 5 / D26) +* PWM (D 13) PD5 14| |31 PA6 (AI 6 / D25) +* PWM (D 14) PD6 15| |30 PA7 (AI 7 / D24) +* PWM (D 15) PD7 16| |29 AREF +* Vcc 17| |28 GND +* GND 18| |27 AVCC +* (D 16) PC0 19| |26 PC7 (D 23) +* (D 17) PC1 20| |25 PC6 (D 22) +* (D 18) PC2 21| |24 PC5 (D 21) TDI +* (D 19) PC3 22| |23 PC4 (D 20) TDO +* +--------+ +* ****************************************************************************************/ #if MOTHERBOARD == 1 #define KNOWN_BOARD 1 |