diff options
Diffstat (limited to 'Sprinter')
| -rw-r--r-- | Sprinter/Sprinter.pde | 26 |
1 files changed, 25 insertions, 1 deletions
diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde index 427f4f6..6383f22 100644 --- a/Sprinter/Sprinter.pde +++ b/Sprinter/Sprinter.pde @@ -138,6 +138,11 @@ - M301 set PID Parameter, and Store to EEPROM - If no PID is used, deaktivate Variables for PID settings + Version 1.3.22T +- Error in JERK calculation after G92 command is send, make problems + with Z-Lift function in Slic3r +- Add homing values can shown with M206 D + */ #include <avr/pgmspace.h> @@ -244,7 +249,7 @@ void __cxa_pure_virtual(){}; // M603 - Show Free Ram -#define _VERSION_TEXT "1.3.21T / 17.07.2012" +#define _VERSION_TEXT "1.3.22T / 20.08.2012" //Stepper Movement Variables char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; @@ -1816,6 +1821,13 @@ FORCE_INLINE void process_commands() if(code_seen('E')) max_e_jerk = code_value() ; break; case 206: // M206 additional homing offset + if(code_seen('D')) + { + showString(PSTR("Addhome X:")); Serial.print(add_homing[0]); + showString(PSTR(" Y:")); Serial.print(add_homing[1]); + showString(PSTR(" Z:")); Serial.println(add_homing[2]); + } + for(int8_t cnt_i=0; cnt_i < 3; cnt_i++) { if(code_seen(axis_codes[cnt_i])) add_homing[cnt_i] = code_value(); @@ -2183,6 +2195,7 @@ static int8_t prev_block_index(int8_t block_index) { static long position[4]; static float previous_speed[4]; // Speed of previous path line segment static float previous_nominal_speed; // Nominal speed of previous path line segment +static unsigned char G92_reset_previous_speed = 0; // Calculates the distance (not time) it takes to accelerate from initial_rate to target_rate using the @@ -2729,10 +2742,19 @@ void plan_buffer_line(float x, float y, float z, float e, float feed_rate) // Start with a safe speed float vmax_junction = max_xy_jerk/2; float vmax_junction_factor = 1.0; + if(fabs(current_speed[Z_AXIS]) > max_z_jerk/2) vmax_junction = min(vmax_junction, max_z_jerk/2); + if(fabs(current_speed[E_AXIS]) > max_e_jerk/2) vmax_junction = min(vmax_junction, max_e_jerk/2); + + if(G92_reset_previous_speed == 1) + { + vmax_junction = 0.1; + G92_reset_previous_speed = 0; + } + vmax_junction = min(vmax_junction, block->nominal_speed); float safe_speed = vmax_junction; @@ -2838,6 +2860,8 @@ void plan_set_position(float x, float y, float z, float e) previous_speed[1] = 0.0; previous_speed[2] = 0.0; previous_speed[3] = 0.0; + + G92_reset_previous_speed = 1; } #ifdef AUTOTEMP |