sprinter - Firmware for 3d printer

Age	Commit message (Collapse)	Author
2012-02-13	changed homing function to not conflict with ↵	Vyacheslav Kononenko
	min_software_endstops/max_software_endstops
2012-02-05	Add pin definition for the Printrboard Rev B	Laine Walker-Avina

2012-01-27	fix indentation	Joachim Schleicher
	This should be a comment. Instead it is printed together with the 'upload' target, when idented.
2012-01-20	correct dependencies in Makefile	Joachim Schleicher
	applet/$(TARGET).elf should depend on the cpp file, not on .pde so that the cpp is rebuilt when pde changes. We drop the target applet_files to achieve the correct behaviour. Now 'make upload' does rebuild the hex file as well.
2011-12-04	Added an option to make init.g on SD run on boot.	Nathan Zadoks

2011-11-28	Revert "Merge pull request #121 from Traumflug/master"	Kliment Yanev
	This reverts commit 11d3281a09e2a2f0ae7c9695f79d2d903c22716b, reversing changes made to f8c17d3b4655ba9b694c407ff174135badb914a5.
2011-11-28	pins.h: allow an ATmega644 (without P).	Markus Hitter

2011-11-10	Improve 200k thermistor table to better match reality	Kliment Yanev

2011-10-29	Define default value for alarm pin	Kliment Yanev

2011-10-29	Fix d calculation on XYZ moves where comparison was inside of abs() instead ↵	barclayo
	of comparing with the result.
2011-10-28	Moved pins.h footer to the end of the file, fixing teensylu support	Joe Kerman

2011-10-27	PID parameters for MakerGear	Keegi

2011-10-27	Merge branch 'master' of github.com:kliment/Sprinter into experimental	Kliment Yanev
	Conflicts: Sprinter/Configuration.h
2011-10-16	Update Sprinter/Sprinter.pde	blddk

2011-10-16	Update Sprinter/Sprinter.pde	blddk

2011-10-16	Update Sprinter/Sprinter.pde	blddk

2011-10-16	Update Sprinter/Configuration.h	blddk

2011-10-16	Added options for the controller cooling fan	blddk

2011-10-16	Added function for controlling controller cooling fan	blddk

2011-10-04	i will figure out git eventually	Joe Kerman

2011-10-04	(correct) pin defs for a190usb1286/teensylu	Joe Kerman

2011-10-03	Merge pull request #96 from rotorit/experimental	kliment
	Add gen3+ support for the techzone gen3 remix
2011-10-01	Merge branch 'master' of github.com:kliment/Sprinter into experimental	Kliment Yanev

2011-09-30	pins.h entry for Teensylu	Joe Kerman

2011-09-30	Added fastio.h support for at90usb1286 (for teensylu)	Joe Kerman

2011-09-28	Fix scoping problem (fixes issue #70)	Guillaume Seguin

2011-09-25	added Gen3 PLUS for TechZone Gen3 Remix Motherboard and renaming 21	rotorit

2011-09-25	Edited Sprinter/pins.h via GitHub	rotorit

2011-09-18	Revert "Merge pull request #95 from AxTheB/master"	Kliment Yanev
	This reverts commit a27649c455c4d13385b32d45bf353ab890da052a, reversing changes made to 8fa84ce04eda414886cc5b075d7257e49b6f7f0a.
2011-09-18	Merge pull request #95 from AxTheB/master	kliment
	simplified string-to-number conversions
2011-09-17	Merge pull request #92 from k-eex/PID	kliment
	PID fixes
2011-09-17	line numbers ale long, not int	Václav 'ax' Hůla

2011-09-17	simplified string-to-number conversions	Václav 'ax' Hůla

2011-09-17	Commit 614b60b was missing function signatures and wouldn't compile	Alessandro Ranellucci

2011-09-17	fixed typo, added even more PID improvements (these settings work out of box ↵	Keegi
	for my old hotend, but overshoot badly on MG hotend)
2011-09-17	PID fixes	Keegi

2011-09-17	Reset heater pins after hard resets to avoid keeping them enabled while we ↵	Alessandro Ranellucci
	don't have temperature control anymore
2011-09-17	Merge remote branch 'upstream/experimental' into alarm-pin	Alessandro Ranellucci
	Conflicts: Sprinter/Sprinter.pde
2011-09-17	Signal an optional ALARM_PIN when reaching MAXTEMP	Alessandro Ranellucci
	Alarm signal can be dismissed by hard-resetting the board or by sending a M42 P23 S0 command (where 23 is the ALARM_PIN)
2011-09-17	Initialize LED pin (was stuck after hard resets)	Alessandro Ranellucci

2011-09-11	Fix temp readings for multiple sensor types.	unknown
	Signed-off-by: Greg Frost <gregfrost1@bigpond.com>
2011-09-08	Merge branch 'master' of github.com:kliment/Sprinter into experimental	Kliment Yanev

2011-09-08	Merge pull request #80 from alexrj/different-endstops	kliment
	Change ENDSTOPS_INVERTING to [XYZ]_ENDSTOP_INVERT
2011-09-08	Edited Sprinter/thermistortables.h via GitHub	reprapperMC

2011-09-08	Edited Sprinter/Configuration.h via GitHub	reprapperMC

2011-09-04	Merge pull request #83 from condac/patch-1	kliment
	Fix so the FAN pin is set as output and fixed fan off case for PWM pins
2011-09-04	New and improved On and Off for FAN_PIN	condac

2011-09-03	Fix deceleration	Kliment Yanev

2011-09-03	Merge branch 'master' into experimental	Kliment Yanev

2011-09-03	Fix underflow in steps per square second	Kliment Yanev