sprinter - Firmware for 3d printer

Age	Commit message (Collapse)	Author
2011-04-14	Fix interval calculation (thanks to BenJackson)	kliment

2011-04-13	Terminate current move after endstop hit - avoids lockup	kliment

2011-04-12	Fix kill function to disable axes and heaters like it should.	kliment

2011-04-11	Fix M28 to work with checksums - thanks to jeanmarc	kliment

2011-04-10	Experimental PID support. Use with caution.	kliment

2011-04-08	Fixed acceleration bug: thank you jeanmarc for pointing that out!	Emanuele Caruso

2011-04-08	Merge remote branch 'origin/master'	Emanuele Caruso

2011-04-08	Improved acceleration algorithm: now you can set minimum feedrate speed	Emanuele Caruso

2011-04-07	Remove checksum from M28 and M23 commands	kliment

2011-04-07	Fixed acceleration algorithm. Added deceleration. Added configuration ↵	Emanuele Caruso
	setting for acceleration in configuration.h
2011-04-06	SD write support. Safety check for step count.	kliment

2011-04-05	Performance tweak: removed timediff calculations for extruder steps if the ↵	Emanuele Caruso
	move has X or Y steps, since it is not used in that case
2011-04-05	Code cleaning in linear_move(), no functional enhancement	Emanuele Caruso

2011-04-05	Fixed SD card removal and reinsertion. Added support for bed temp reading in ↵	kliment
	newer repsnapper.
2011-04-05	Removed float calculations in the new extruder move algorithm	Emanuele Caruso

2011-04-04	Fixed extruder issue: the e-move was shorter than other axises	Emanuele Caruso

2011-04-03	Fixed geometry bug. Implemented Bresenham linear interpolation for X and Y ↵	Emanuele Caruso
	axis. Added acceleration to X and Y axes.
2011-03-29	Timediff was not declared with SD disabled	kliment

2011-03-29	Fix potential very bad geometry bug	kliment

2011-03-28	Attempt at geometry fix. Catches up to missed steps whenever it finds them.	kliment

2011-03-28	Changed initialization order to enable Mega 2560 users to connect more reliably	kliment

2011-03-28	Changed initialization order to enable Mega 2560 users to connect more reliably	kliment

2011-03-28	Added temp tables to configuration. Made dual temp tables optional. ↵	kliment
	Re-enabled min-z endstop in default config.
2011-03-26	Added support for a heated bed thermistor that can be different from the ↵	Emanuele Caruso
	hot-end thermistor
2011-03-26	Fixed wrong feedrate bug.	Emanuele Caruso

2011-03-13	Added SD support, heatbed support and internal endstop pullup support. ↵	kliment
	Improved communications, removed echo, added buffering.
2011-01-05	set endstop default config for RRSOES	johnnyr

2010-12-08	added ifndef for 2560	johnnyr

2010-11-10	Changed Heater and Fan pins for v1.1	johnnyr

2010-11-10	Added Fan control	johnnyr

2010-08-29	(no commit message)	johnnyr

2010-08-12	customized config for RAMPS	johnnyr

2010-08-11	(no commit message)	johnnyr

2010-08-11	changed arduino mega pins for ramps	johnnyr

2010-08-11	(no commit message)	johnnyr

2010-05-12	added failsafe endstop checking Mcode that can be used for homing	tonokip

2010-05-05	properly check for new serial data	tonokip

2010-05-03	check for inactivity inside movement loop	tonokip

2010-05-03	custom code M92 set axis_steps_per_unit	tonokip

2010-05-03	added inactivity shutdown timer	tonokip

2010-05-02	fix extrusion feedrate	tonokip

2010-05-02	added config option for inverting stepper direction	tonokip

2010-05-02	minor fix newlines for configuration.h	tonokip

2010-05-02	remove (byte) from pins.h	tonokip

2010-05-01	rewrite	tonokip