path: root/lightctrl_v2.c

#define _dbg_dump_ret()
#define dbg_dump_ret() do { \
		union { uint16_t u; void *p; } ret = { .p = __builtin_return_address(0) }; \
		_uart_putch('#'); uart_puthex16((ret.u & 0xfff) << 1); _uart_putch('\n'); } while (0)

#define array_size(a) (sizeof(a) / sizeof(a[0]))

#define F_CPU 8000000
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include <avr/wdt.h>
#include <util/delay.h>

const uint8_t __signature[3] __attribute__((section (".signature"), used)) =
        { SIGNATURE_2, SIGNATURE_1, SIGNATURE_0 };

#define B_SCK	5
#define B_MISO	4
#define B_MOSI	3
#define B_SS	2

#define D_TXD	1
#define D_DALII	3
#define D_DALIO	4
#define D_LED1	5
#define D_LED2	6
#define D_TAST	7

enum {
	G_BOOTING = 0,
	G_RUNNING,
} global_state = G_BOOTING;

#define SYSTICK_USER_100HZ
static void systick_user_100hz(void);
#define SYSTICK_USER_1HZ
static void systick_user_1hz(void);
#define CAN_USER_IRQH
static void can_user_irqh(void);
#define DALI_USER_IDLE
static uint16_t dali_user_idle(void);

#define DALI_NUMDEV		64
#define T_EVG_COOLDOWN		5	/* seconds */

/* cooldown:
 *  set(0) => set_needed=1
 *   `-> handler performs DALI "OFF",
 *       set_needed = 0, cooldown = T_EVG_COOLDOWN
 *     | no other action while cooldown <> 0
 *   `-> systick_user_1hz cooldown--
 *   `-> cooldown == 0 => resume normal operations
 *
 * ack_changes:
 *  set() => set_needed =1
 *   `-> handler performs DALI SET
 *       ack_changes = 3
 *   `-> 
 */
struct dali_dev {
	uint8_t set, actual;

	__extension__ uint8_t present : 1;
	__extension__ uint8_t _unused1 : 1;
	__extension__ uint8_t need_set : 2;
	__extension__ uint8_t need_poweron : 2;
	__extension__ uint8_t need_poweroff : 2;

	__extension__ uint8_t tx_read : 1;
	__extension__ uint8_t tx_set : 3;
	__extension__ uint8_t cooldown : 4;
} __attribute__((packed));

#define NEED_SET	2
#define NEED_POWERON	2
#define NEED_POWEROFF	2

static struct dali_dev devices[DALI_NUMDEV];
static void target_set(uint8_t dst, uint8_t val);
#define target_get(idx)			devices[idx].set
#define target_present(addr)		devices[addr].present
#define target_set_present(addr)	devices[addr].present = 1

#define REFRESH_TIMER	30	/* seconds */

#include "uart.c"
#include "tick.c"
#include "dali2.c"
#include "dali_ctl.c"
#include "dim.c"
#include "can.c"
#include "wdt.c"
#include "helpers.c"

#define CANA_DALI_BASE		0x440

/* irq mixed */
static void target_set(uint8_t dst, uint8_t val)
{
	uart_puts(" [");
	uart_puthex(dst);
	uart_puts("=");
	uart_puthex(val);
	uart_puts("]");

	devices[dst].need_set = NEED_SET;
	if (!devices[dst].set && val)
		devices[dst].need_poweron = NEED_POWERON;
	else if (!val)
		devices[dst].need_poweroff = NEED_POWEROFF;
	devices[dst].set = val;
}

static uint8_t refresh_timer = 0;

/* irqonly */
static void systick_user_1hz(void)
{
	if (global_state == G_BOOTING)
		return;

	for (uint8_t i = 0; i < DALI_NUMDEV; i++) {
		if (!devices[i].cooldown)
			continue;
		devices[i].cooldown--;
		if (!devices[i].cooldown && devices[i].set) {
			devices[i].need_set = NEED_SET;
			devices[i].need_poweron = NEED_POWERON;
		}
	}
	if (refresh_timer)
		refresh_timer--;
	else {
		uart_puts("periodic DALI refresh triggered\n");
		for (uint8_t i = 0; i < DALI_NUMDEV; i++) {
			if (!target_present(i))
				continue;
			if (devices[i].set)
				devices[i].need_set |= 1;
			else
				devices[i].need_poweroff |= 1;
		}
		refresh_timer = REFRESH_TIMER;
	}
}

/* irqonly */
static void systick_user_100hz(void)
{
	if (global_state == G_BOOTING)
		return;

	for (uint8_t i = 0; i < DALI_NUMDEV; i++)
		if (devices[i].tx_set > 2)
			devices[i].tx_set--;
	do_tick();
}

/* irqonly */
static void can_handle_light(uint16_t sublab_addr)
{
	/* - 7 allows overlapping writes to a nonaligned address.
	 * "base" below will start out at 0xf9~0xff in that case */

	if (sublab_addr < CANA_DALI_BASE - 8)
		return;

	uint8_t base = sublab_addr - CANA_DALI_BASE, len = can_rx_len(), pos;
	for (pos = 0; pos < len; pos++) {
		uint8_t dst = base + pos, val;
		if (dst == 0xff) {
			/* bus element 43f: hw switch disable */
			sw.enabled = can_rx_data[pos] != 0;
			continue;
		}
		if (dst >= 0x40)
			continue;
		val = can_rx_data[pos];
		target_set(dst, val);
	}
}

/* irqonly */
static uint16_t dali_user_idle(void)
{
	static uint8_t dali_exec_pos = 0;
	uint8_t stop_at = dali_exec_pos;
	uint16_t ret = DALI_INVALID;

	if (global_state == G_BOOTING)
		return ret;

	do {
		dali_exec_pos = (dali_exec_pos + 1) & (DALI_NUMDEV - 1);

		if (devices[dali_exec_pos].need_poweroff) {
			ret = (dali_exec_pos << 9) | 0x100;
			devices[dali_exec_pos].need_poweroff--;
			devices[dali_exec_pos].cooldown =
					T_EVG_COOLDOWN;

		} else if (devices[dali_exec_pos].need_poweron) {
			ret = (dali_exec_pos << 9) | 0x108;
			devices[dali_exec_pos].need_poweron--;

		} else if (devices[dali_exec_pos].need_set) {
			ret = (dali_exec_pos << 9) |
				(devices[dali_exec_pos].set == 0xff
				? 0xfe : devices[dali_exec_pos].set);
			devices[dali_exec_pos].need_set--;
		}
	} while (dali_exec_pos != stop_at && ret == DALI_INVALID);
	if (ret == DALI_INVALID)
		return ret;

	uart_puttick();
	uart_puts("dali async ");
	uart_puthex16(ret);
	uart_puts("\n");

	if (!devices[dali_exec_pos].need_set
			&& !devices[dali_exec_pos].need_poweron
			&& !devices[dali_exec_pos].need_poweroff)
		devices[dali_exec_pos].tx_set = 7;
	return ret;
}

static struct can can_queue[4];
static uint8_t can_queue_ptr = 0;

/* set commands are directly applied from CAN IRQ */
/* irqonly */
static void can_user_irqh(void)
{
	uint16_t sublab_addr, sublab_proto;

	if (!can_rx_isext() || global_state == G_BOOTING) {
		can.rx_addr.u = 0;
		return;
	}

	sublab_addr = can_rx_sublab_addr();
	if (sublab_addr >= CANA_DALI_BASE + DALI_NUMDEV
			|| sublab_addr < CANA_DALI_BASE - 7) {
		can.rx_addr.u = 0;
		return;
	}

	sublab_proto = can_rx_sublab_proto();

	uart_puttick();
	uart_puts("CAN ");
	uart_puthex16(sublab_proto);
	uart_puts(" ");
	uart_puthex16(sublab_addr);

	if (sublab_proto == 0xcc08)
		can_handle_light(sublab_addr);
	else {
		can_queue[can_queue_ptr] = can;
		can_queue_ptr = (can_queue_ptr + 1)
			& (array_size(can_queue) - 1);
	}
	can.rx_addr.u = 0;
	uart_puts(" EOI\n");
}

static struct can perform;

const uint8_t dalidisc_page0[6] PROGMEM = {0x01, 0x01, 0x00, 0x01, 0x00, 0x00};
const uint8_t dalidisc_page8[4] PROGMEM = {'D', 'A', 'L', 'I'};

static uint8_t dali_grab_value(uint8_t busaddr, uint8_t cmd)
{
	dali_send(0x100 | (busaddr << 9) | cmd);
	if (!dali_rx_avail) {
		_delay_ms(2);
		dali_send(0x100 | (busaddr << 9) | cmd);
	}
	if (!dali_rx_avail) {
		_delay_ms(5);
		dali_send(0x100 | (busaddr << 9) | cmd);
	}
	return dali_rx_avail ? dali_rx : 0xa5;
}

static void can_handle_disco(uint16_t sublab_addr)
{
	wdt_reset();

	if (sublab_addr < CANA_DALI_BASE)
		return;

	uint8_t addr = sublab_addr - CANA_DALI_BASE;
	uint8_t page = can_rx_sublab_disco_page2(perform);
	uint8_t buf[8];

	if (!can_rx_ext_rr2(perform)) {
		uart_puts("nRR\n");
		switch (page) {
		case 5:
			if (can_rx_len2(perform) != 2)
				return;
			dali_send((perform.rx_data[0] << 8) | perform.rx_data[1]);
			can_send(CANA_DISCOVERY_F(page, sublab_addr), !!dali_rx_avail, (uint8_t *)&dali_rx);
			return;
		case 6:
			if (can_rx_len2(perform) == 4
				&& perform.rx_data[0] == 's'
				&& perform.rx_data[1] == 'c'
				&& perform.rx_data[2] == 'a'
				&& perform.rx_data[3] == 'n') {

				global_state = G_BOOTING;
				for (uint8_t c = 0; c < DALI_NUMDEV; c++)
					devices[c].present = 0;
				dali_search();
				global_state = G_RUNNING;
			} else if (can_rx_len2(perform) == 3
				&& perform.rx_data[0] == 'q'
				&& perform.rx_data[1] == 'b') {
				uint8_t addr = perform.rx_data[2] & 0x3f;
				uint8_t msg[3];

				dali_send(DALI_C_QBALLAST | (addr << 9));
				if (!dali_rx_avail)
					dali_send(DALI_C_QBALLAST | (addr << 9));
				devices[addr].present = dali_rx_avail;

				msg[0] = 'q';
				msg[1] = dali_rx_avail ? '+' : '-';
				msg[2] = addr;
				can_send(CANA_DISCOVERY_F(page, sublab_addr), sizeof(msg), msg);
			}
			return;
		}
		return;
	}

#define loadpgm(what) for (uint8_t c = 0; c < sizeof(what); c++) buf[c] = pgm_read_byte(what + c);
	switch (page) {
	case 0:
		loadpgm(dalidisc_page0);
		can_send(CANA_DISCOVERY_F(page, sublab_addr), sizeof(dalidisc_page0), buf);
		return;
	case 6:
		/* page 6:
		 *	VERSION NUMBER
		 *	DEVICE TYPE
		 *	PHYSICAL MIN LEVEL
		 *	RANDOM ADDRESS H
		 *	RANDOM ADDRESS M
		 *	RANDOM ADDRESS L
		 */
		buf[0] = dali_grab_value(addr, 0x97);
		buf[1] = dali_grab_value(addr, 0x99);
		buf[2] = dali_grab_value(addr, 0x9a);
		buf[3] = dali_grab_value(addr, 0xc2);
		buf[4] = dali_grab_value(addr, 0xc3);
		buf[5] = dali_grab_value(addr, 0xc4);
		can_send(CANA_DISCOVERY_F(page, sublab_addr), 6, buf);
		return;

	case 7:
		/* page 7:
		 *	ACTUAL DIM LEVEL
		 *	MAX LEVEL
		 *	MIN LEVEL
		 *	POWER ON LEVEL
		 *	SYSTEM FAILURE LEVEL
		 *	FADE RATE (low nibble), FADE TIME (high nibble)
		 *	STATUS
		 *	SHORT ADDRESS (or 0xff if no device)
		 */
		for (uint8_t offs = 0; offs < 6; offs++)
			buf[offs] = dali_grab_value(addr, 0xa0 + offs);

		buf[6] = dali_grab_value(addr, 0x90);
		dali_send(0x191 | (addr << 9));
		buf[7] = dali_rx_avail ? addr : 0xff;

		can_send(CANA_DISCOVERY_F(page, sublab_addr), 8, buf);
		return;
	case 8:
		loadpgm(dalidisc_page8);
		can_send(CANA_DISCOVERY_F(page, sublab_addr), sizeof(dalidisc_page8), buf);
		return;
	default:
		can_send(CANA_DISCOVERY_F(page, sublab_addr), 0, NULL);
	}
}

static void can_delayed_exec_do(void)
{
	uint16_t sublab_addr, sublab_proto;

	sublab_addr = can_rx_sublab_addr2(perform);
	sublab_proto = can_rx_sublab_proto2(perform);

	switch (sublab_proto) {
	case 0x4c08:
		can_handle_disco(sublab_addr);
		return;
	}
}

static void can_delayed_exec(void)
{
	if (can_tx_busy())
		return;

	for (uint8_t i = 0; i < array_size(can_queue); i++) {
		uint8_t idx = (can_queue_ptr + i) & (array_size(can_queue) - 1);
		cli();
		if (can_queue[idx].rx_addr.u) {
			perform = can_queue[idx];
			can_queue[idx].rx_addr.u = 0;
			sei();
			can_delayed_exec_do();
		} else
			sei();
	}
}

static void can_send_acks(void)
{
	static uint8_t tx_ack_pos = 0;
	uint8_t pkt_start_at = 0xff;
	uint8_t data[8], len = 0;

	if (can_tx_busy())
		return;

	do {
		if (devices[tx_ack_pos].tx_set == 1
				|| devices[tx_ack_pos].tx_set == 2) {
			len = 1;
			break;
		}
		tx_ack_pos++;
	} while (tx_ack_pos < DALI_NUMDEV && !len);

	if (!len) {
		tx_ack_pos = 0;
		return;
	}

	pkt_start_at = tx_ack_pos;
	data[0] = devices[tx_ack_pos].set;
	devices[tx_ack_pos].tx_set--;
	tx_ack_pos++;

	while (tx_ack_pos < DALI_NUMDEV && len < 8
			&& devices[tx_ack_pos].tx_set) {
		data[tx_ack_pos - pkt_start_at] = devices[tx_ack_pos].set;
		if (devices[tx_ack_pos].tx_set > 2)
			devices[tx_ack_pos].tx_set = 2;
		devices[tx_ack_pos].tx_set--;

		len++;
		tx_ack_pos++;
	}

	can_send(CANA_LIGHT_F(0, CANA_DALI_BASE + pkt_start_at), len, data);

	if (tx_ack_pos == DALI_NUMDEV)
		tx_ack_pos = 0;
}

static void can_send_read(void)
{
	uint8_t pkt_start_at = 0, i;
	uint8_t data[8], len = 0;

	if (can_tx_busy())
		return;

	for (i = 0; i < DALI_NUMDEV; i++)
		if (devices[i].tx_read)
			break;
	if (i == DALI_NUMDEV)
		return;

	pkt_start_at = i;
	while (len < 8 && i < DALI_NUMDEV && devices[i].tx_read) {
		devices[i].tx_read = 0;

		dali_send(0x1a0 | (i << 9));
		if (!dali_rx_avail)
			dali_send(0x1a0 | (i << 9));
		if (!dali_rx_avail) {
			uart_puts("!RE ");
			uart_puthex(i);
			uart_puts("\n");
			break;
		}
		data[i - pkt_start_at] = dali_rx;
		len++, i++;
	}
	if (!len)
		return;
	can_send(CANA_SENSOR_F(CANA_DALI_BASE + pkt_start_at), len, data);
}

static void can_sched(void)
{
	static uint32_t last_dump_tick = 0;

	if (systick.u32 - last_dump_tick > 15) {
		last_dump_tick = systick.u32;
		for (uint8_t i = 0; i < DALI_NUMDEV; i++)
			if (!devices[i].tx_set) {
				devices[i].tx_set = devices[i].present;
				devices[i].tx_read = devices[i].present;
			}
	}
}

int main(void)
{
	wdt_init();

	DDRD |= (1 << D_LED1) | (1 << D_LED2 ) | (1 << D_TXD) | (1 << D_DALIO);
	PORTD |= (1 << D_LED1) | (1 << D_TAST);
	PORTD &= ~(1 << D_LED1);
	refresh_timer = REFRESH_TIMER;

	uart_init();
	tick_init();
	can_preinit();
	dali_init();
	dim_init();

	postinit_slowboot();

	dali_buscheck();

	can_init();
	can_CANSTAT();

	wdt_reset();

	dali_search();

	uart_puts("\ninit done\n");

	global_state = G_RUNNING;
	while (1) {
		wdt_reset();

		can_delayed_exec();
		can_sched();
		can_send_acks();
		can_send_read();
	}
}