summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPaul Jakma <paul.jakma@sun.com>2006-07-04 14:41:08 +0000
committerPaul Jakma <paul.jakma@sun.com>2006-07-04 14:41:08 +0000
commit5c1960687024a4ab16d33b58be8c410a935c583b (patch)
tree9e4fa9016735f2d4fb95209ab6c3af4b58b78df4
parentf7a76abf3078bac6251d4e27f0143a9c0b14dde7 (diff)
[doc] remove the auto-generated quagga.info file from CVS
2006-07-04 Paul Jakma <paul.jakma@sun.com> * quagga.info: remove auto-generated file. It will still be present in dist tarballs, so shouldn't affect anyone but direct users of CVS. Required texinfo version should be widely available. * .cvsignore: ignore quagga.info
-rw-r--r--doc/.cvsignore1
-rw-r--r--doc/ChangeLog7
-rw-r--r--doc/quagga.info7227
3 files changed, 8 insertions, 7227 deletions
diff --git a/doc/.cvsignore b/doc/.cvsignore
index 5c3c752a..43987b24 100644
--- a/doc/.cvsignore
+++ b/doc/.cvsignore
@@ -7,6 +7,7 @@ zebra.html
defines.texi
version.texi
quagga.html
+quagga.info
*.pdf
*.eps
quagga.ps
diff --git a/doc/ChangeLog b/doc/ChangeLog
index 3b5e45bb..c811cb31 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,10 @@
+2006-07-04 Paul Jakma <paul.jakma@sun.com>
+
+ * quagga.info: remove auto-generated file. It will still be
+ present in dist tarballs, so shouldn't affect anyone but
+ direct users of CVS. Required texinfo version should be
+ widely available.
+
2006-06-28 Erik Muller <erikm@internap.com>
* ospfd.texi: Document new ospf router subcommand
diff --git a/doc/quagga.info b/doc/quagga.info
deleted file mode 100644
index 1fe6be10..00000000
--- a/doc/quagga.info
+++ /dev/null
@@ -1,7227 +0,0 @@
-This is quagga.info, produced by makeinfo version 4.8 from quagga.texi.
-
- Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
-
- Permission is granted to make and distribute verbatim copies of
- this manual provided the copyright notice and this permission
- notice are preserved on all copies.
-
- Permission is granted to copy and distribute modified versions of
- this manual under the conditions for verbatim copying, provided
- that the entire resulting derived work is distributed under the
- terms of a permission notice identical to this one.
-
- Permission is granted to copy and distribute translations of this
- manual into another language, under the above conditions for
- modified versions, except that this permission notice may be
- stated in a translation approved by Kunihiro Ishiguro.
-
-INFO-DIR-SECTION Routing Software:
-START-INFO-DIR-ENTRY
-* Quagga: (quagga). The Quagga Software Routing Suite
-END-INFO-DIR-ENTRY
-
- This file documents the Quagga Software Routing Suite which manages
-common TCP/IP routing protocols.
-
- This is Edition 0.99.4, last updated 10 September 2005 of `The
-Quagga Manual', for Quagga Version 0.99.4.
-
- Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
-
- Permission is granted to make and distribute verbatim copies of
- this manual provided the copyright notice and this permission
- notice are preserved on all copies.
-
- Permission is granted to copy and distribute modified versions of
- this manual under the conditions for verbatim copying, provided
- that the entire resulting derived work is distributed under the
- terms of a permission notice identical to this one.
-
- Permission is granted to copy and distribute translations of this
- manual into another language, under the above conditions for
- modified versions, except that this permission notice may be
- stated in a translation approved by Kunihiro Ishiguro.
-
-
-File: quagga.info, Node: Top, Next: Overview, Up: (dir)
-
-Quagga
-******
-
-Quagga is an advanced routing software package that provides a suite of
-TCP/IP based routing protocols. This is the Manual for Quagga 0.99.4.
-Quagga is a fork of GNU Zebra.
-
- Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
-
- Permission is granted to make and distribute verbatim copies of
- this manual provided the copyright notice and this permission
- notice are preserved on all copies.
-
- Permission is granted to copy and distribute modified versions of
- this manual under the conditions for verbatim copying, provided
- that the entire resulting derived work is distributed under the
- terms of a permission notice identical to this one.
-
- Permission is granted to copy and distribute translations of this
- manual into another language, under the above conditions for
- modified versions, except that this permission notice may be
- stated in a translation approved by Kunihiro Ishiguro.
-
-* Menu:
-
-* Overview::
-* Installation::
-* Basic commands::
-* Zebra::
-* RIP::
-* RIPng::
-* OSPFv2::
-* OSPFv3::
-* BGP::
-* Configuring Quagga as a Route Server::
-* VTY shell::
-* Filtering::
-* Route Map::
-* IPv6 Support::
-* Kernel Interface::
-* SNMP Support::
-* Zebra Protocol::
-* Packet Binary Dump Format::
-* Command Index::
-* VTY Key Index::
-
-
-File: quagga.info, Node: Overview, Next: Installation, Prev: Top, Up: Top
-
-1 Overview
-**********
-
-Quagga is a routing software package that provides TCP/IP based routing
-services with routing protocols support such as RIPv1, RIPv2, RIPng,
-OSPFv2, OSPFv3, BGP-4, and BGP-4+ (*note Supported RFC::). Quagga also
-supports special BGP Route Reflector and Route Server behavior. In
-addition to traditional IPv4 routing protocols, Quagga also supports
-IPv6 routing protocols. With SNMP daemon which supports SMUX protocol,
-Quagga provides routing protocol MIBs (*note SNMP Support::).
-
- Quagga uses an advanced software architecture to provide you with a
-high quality, multi server routing engine. Quagga has an interactive
-user interface for each routing protocol and supports common client
-commands. Due to this design, you can add new protocol daemons to
-Quagga easily. You can use Quagga library as your program's client
-user interface.
-
- Quagga is distributed under the GNU General Public License.
-
-* Menu:
-
-* About Quagga:: Basic information about Quagga
-* System Architecture:: The Quagga system architecture
-* Supported Platforms:: Supported platforms and future plans
-* Supported RFC:: Supported RFCs
-* How to get Quagga::
-* Mailing List:: Mailing list information
-* Bug Reports:: Mail address for bug data
-
-
-File: quagga.info, Node: About Quagga, Next: System Architecture, Up: Overview
-
-1.1 About Quagga
-================
-
-Today, TCP/IP networks are covering all of the world. The Internet has
-been deployed in many countries, companies, and to the home. When you
-connect to the Internet your packet will pass many routers which have
-TCP/IP routing functionality.
-
- A system with Quagga installed acts as a dedicated router. With
-Quagga, your machine exchanges routing information with other routers
-using routing protocols. Quagga uses this information to update the
-kernel routing table so that the right data goes to the right place.
-You can dynamically change the configuration and you may view routing
-table information from the Quagga terminal interface.
-
- Adding to routing protocol support, Quagga can setup interface's
-flags, interface's address, static routes and so on. If you have a
-small network, or a stub network, or xDSL connection, configuring the
-Quagga routing software is very easy. The only thing you have to do is
-to set up the interfaces and put a few commands about static routes
-and/or default routes. If the network is rather large, or if the
-network structure changes frequently, you will want to take advantage
-of Quagga's dynamic routing protocol support for protocols such as RIP,
-OSPF or BGP.
-
- Traditionally, UNIX based router configuration is done by `ifconfig'
-and `route' commands. Status of routing table is displayed by
-`netstat' utility. Almost of these commands work only if the user has
-root privileges. Quagga has a different system administration method.
-There are two user modes in Quagga. One is normal mode, the other is
-enable mode. Normal mode user can only view system status, enable mode
-user can change system configuration. This UNIX account independent
-feature will be great help to the router administrator.
-
- Currently, Quagga supports common unicast routing protocols.
-Multicast routing protocols such as BGMP, PIM-SM, PIM-DM may be
-supported in Quagga 2.0. MPLS support is going on. In the future,
-TCP/IP filtering control, QoS control, diffserv configuration will be
-added to Quagga. Quagga project's final goal is making a productive,
-quality, free TCP/IP routing software.
-
-
-File: quagga.info, Node: System Architecture, Next: Supported Platforms, Prev: About Quagga, Up: Overview
-
-1.2 System Architecture
-=======================
-
-Traditional routing software is made as a one process program which
-provides all of the routing protocol functionalities. Quagga takes a
-different approach. It is made from a collection of several daemons
-that work together to build the routing table. There may be several
-protocol-specific routing daemons and zebra the kernel routing manager.
-
- The `ripd' daemon handles the RIP protocol, while `ospfd' is a
-daemon which supports OSPF version 2. `bgpd' supports the BGP-4
-protocol. For changing the kernel routing table and for redistribution
-of routes between different routing protocols, there is a kernel
-routing table manager `zebra' daemon. It is easy to add a new routing
-protocol daemons to the entire routing system without affecting any
-other software. You need to run only the protocol daemon associated
-with routing protocols in use. Thus, user may run a specific daemon
-and send routing reports to a central routing console.
-
- There is no need for these daemons to be running on the same
-machine. You can even run several same protocol daemons on the same
-machine. This architecture creates new possibilities for the routing
-system.
-
- +----+ +----+ +-----+ +-----+
- |bgpd| |ripd| |ospfd| |zebra|
- +----+ +----+ +-----+ +-----+
- |
- +---------------------------|--+
- | v |
- | UNIX Kernel routing table |
- | |
- +------------------------------+
-
- Quagga System Architecture
-
- Multi-process architecture brings extensibility, modularity and
-maintainability. At the same time it also brings many configuration
-files and terminal interfaces. Each daemon has it's own configuration
-file and terminal interface. When you configure a static route, it
-must be done in `zebra' configuration file. When you configure BGP
-network it must be done in `bgpd' configuration file. This can be a
-very annoying thing. To resolve the problem, Quagga provides
-integrated user interface shell called `vtysh'. `vtysh' connects to
-each daemon with UNIX domain socket and then works as a proxy for user
-input.
-
- Quagga was planned to use multi-threaded mechanism when it runs with
-a kernel that supports multi-threads. But at the moment, the thread
-library which comes with GNU/Linux or FreeBSD has some problems with
-running reliable services such as routing software, so we don't use
-threads at all. Instead we use the `select(2)' system call for
-multiplexing the events.
-
-
-File: quagga.info, Node: Supported Platforms, Next: Supported RFC, Prev: System Architecture, Up: Overview
-
-1.3 Supported Platforms
-=======================
-
-Currently Quagga supports GNU/Linux, BSD and Solaris. Porting Quagga to
-other platforms is not too difficult as platform dependent code should
-most be limited to the `zebra' daemon. Protocol daemons are mostly
-platform independent. Please let us know when you find out Quagga runs
-on a platform which is not listed below.
-
- The list of officially supported platforms are listed below. Note
-that Quagga may run correctly on other platforms, and may run with
-partial functionality on further platforms.
-
-
- * GNU/Linux 2.2.x and higher
-
- * FreeBSD 4.x and higher
-
- * NetBSD 1.6 and higher
-
- * OpenBSD 2.5 and higher
-
- * Solaris 2.6 and higher (IPv6 support requires a patch at moment)
-
-
- Some IPv6 stacks are in development. Quagga supports following IPv6
-stacks. For BSD, we recommend KAME IPv6 stack. Solaris IPv6 stack is
-not yet supported.
-
- * Linux IPv6 stack for GNU/Linux 2.2.x and higher.
-
- * KAME IPv6 stack for BSD.
-
- * INRIA IPv6 stack for BSD.
-
-
-File: quagga.info, Node: Supported RFC, Next: How to get Quagga, Prev: Supported Platforms, Up: Overview
-
-1.4 Supported RFC
-=================
-
-Below is the list of currently supported RFC's.
-
-RFC1058
- `Routing Information Protocol. C.L. Hedrick. Jun-01-1988.'
-
-RF2082
- `RIP-2 MD5 Authentication. F. Baker, R. Atkinson. January 1997.'
-
-RFC2453
- `RIP Version 2. G. Malkin. November 1998.'
-
-RFC2080
- `RIPng for IPv6. G. Malkin, R. Minnear. January 1997.'
-
-RFC2328
- `OSPF Version 2. J. Moy. April 1998.'
-
-RFC2370
- `The OSPF Opaque LSA Option R. Coltun. July 1998.'
-
-RFC3101
- `The OSPF Not-So-Stubby Area (NSSA) Option P. Murphy. January
- 2003.'
-
-RFC2740
- `OSPF for IPv6. R. Coltun, D. Ferguson, J. Moy. December 1999.'
-
-RFC1771
- `A Border Gateway Protocol 4 (BGP-4). Y. Rekhter & T. Li. March
- 1995.'
-
-RFC1965
- `Autonomous System Confederations for BGP. P. Traina. June 1996.'
-
-RFC1997
- `BGP Communities Attribute. R. Chandra, P. Traina & T. Li. August
- 1996.'
-
-RFC2545
- `Use of BGP-4 Multiprotocol Extensions for IPv6 Inter-Domain
- Routing. P. Marques, F. Dupont. March 1999.'
-
-RFC2796
- `BGP Route Reflection An alternative to full mesh IBGP. T. Bates &
- R. Chandrasekeran. June 1996.'
-
-RFC2858
- `Multiprotocol Extensions for BGP-4. T. Bates, Y. Rekhter, R.
- Chandra, D. Katz. June 2000.'
-
-RFC2842
- `Capabilities Advertisement with BGP-4. R. Chandra, J. Scudder.
- May 2000.'
-
-RFC3137
- `OSPF Stub Router Advertisement, A. Retana, L. Nguyen, R. White,
- A. Zinin, D. McPherson. June 2001'
-
- When SNMP support is enabled, below RFC is also supported.
-
-RFC1227
- `SNMP MUX protocol and MIB. M.T. Rose. May-01-1991.'
-
-RFC1657
- `Definitions of Managed Objects for the Fourth Version of the
- Border Gateway Protocol (BGP-4) using SMIv2. S. Willis, J. Burruss,
- J. Chu, Editor. July 1994.'
-
-RFC1724
- `RIP Version 2 MIB Extension. G. Malkin & F. Baker. November 1994.'
-
-RFC1850
- `OSPF Version 2 Management Information Base. F. Baker, R. Coltun.
- November 1995.'
-
-
-
-File: quagga.info, Node: How to get Quagga, Next: Mailing List, Prev: Supported RFC, Up: Overview
-
-1.5 How to get Quagga
-=====================
-
-Quagga is still beta software and there is no officially released
-version.
-
- Zebra's official web page is located at:
-
- `http://www.gnu.org/software/zebra/zebra.html'.
-
- The original Zebra web site is located at:
-
- `http://www.zebra.org/'.
-
- As of this writing, development by zebra.org on Zebra has slowed
-down. Some work is being done by third-parties to try maintain
-bug-fixes and enhancements to the current Zebra code-base, which has
-resulted in a fork of Zebra called Quagga, see:
-
- `http://www.quagga.net/'
-
- for further information, as well as links to additional zebra
-resources.
-
-
-File: quagga.info, Node: Mailing List, Next: Bug Reports, Prev: How to get Quagga, Up: Overview
-
-1.6 Mailing List
-================
-
-There is a mailing list for discussions about Quagga. If you have any
-comments or suggestions to Quagga, please subscribe to:
-
- `http://lists.quagga.net/mailman/listinfo/quagga-users'.
-
- The Quagga site has further information on the available mailing
-lists, see:
-
- `http://www.quagga.net/lists.php'
-
-
-File: quagga.info, Node: Bug Reports, Prev: Mailing List, Up: Overview
-
-1.7 Bug Reports
-===============
-
-If you think you have found a bug, please send a bug report to:
-
- `http://bugzilla.quagga.net'
-
- When you send a bug report, please be careful about the points below.
-
- * Please note what kind of OS you are using. If you use the IPv6
- stack please note that as well.
-
- * Please show us the results of `netstat -rn' and `ifconfig -a'.
- Information from zebra's VTY command `show ip route' will also be
- helpful.
-
- * Please send your configuration file with the report. If you
- specify arguments to the configure script please note that too.
-
- Bug reports are very important for us to improve the quality of
-Quagga. Quagga is still in the development stage, but please don't
-hesitate to send a bug report to `http://bugzilla.quagga.net'.
-
-
-File: quagga.info, Node: Installation, Next: Basic commands, Prev: Overview, Up: Top
-
-2 Installation
-**************
-
-There are three steps for installing the software: configuration,
-compilation, and installation.
-
-* Menu:
-
-* Configure the Software::
-* Build the Software::
-* Install the Software::
-
- The easiest way to get Quagga running is to issue the following
-commands:
-
- % configure
- % make
- % make install
-
-
-File: quagga.info, Node: Configure the Software, Next: Build the Software, Up: Installation
-
-2.1 Configure the Software
-==========================
-
-* Menu:
-
-* The Configure script and its options::
-* Least-Privilege support::
-* Linux notes::
-
-
-File: quagga.info, Node: The Configure script and its options, Next: Least-Privilege support, Up: Configure the Software
-
-2.1.1 The Configure script and its options
-------------------------------------------
-
-Quagga has an excellent configure script which automatically detects
-most host configurations. There are several additional configure
-options you can use to turn off IPv6 support, to disable the
-compilation of specific daemons, and to enable SNMP support.
-
-`--enable-guile'
- Turn on compilation of the zebra-guile interpreter. You will need
- the guile library to make this. zebra-guile implementation is not
- yet finished. So this option is only useful for zebra-guile
- developers.
-
-`--disable-ipv6'
- Turn off IPv6 related features and daemons. Quagga configure
- script automatically detects IPv6 stack. But sometimes you might
- want to disable IPv6 support of Quagga.
-
-`--disable-zebra'
- Do not build zebra daemon.
-
-`--disable-ripd'
- Do not build ripd.
-
-`--disable-ripngd'
- Do not build ripngd.
-
-`--disable-ospfd'
- Do not build ospfd.
-
-`--disable-ospf6d'
- Do not build ospf6d.
-
-`--disable-bgpd'
- Do not build bgpd.
-
-`--disable-bgp-announce'
- Make `bgpd' which does not make bgp announcements at all. This
- feature is good for using `bgpd' as a BGP announcement listener.
-
-`--enable-netlink'
- Force to enable GNU/Linux netlink interface. Quagga configure
- script detects netlink interface by checking a header file. When
- the header file does not match to the current running kernel,
- configure script will not turn on netlink support.
-
-`--enable-snmp'
- Enable SNMP support. By default, SNMP support is disabled.
-
-`--enable-opaque-lsa'
- Enable support for Opaque LSAs (RFC2370) in ospfd.
-
-`--disable-ospfapi'
- Disable support for OSPF-API, an API to interface directly with
- ospfd. OSPF-API is enabled if -enable-opaque-lsa is set.
-
-`--disable-ospfclient'
- Disable building of the example OSPF-API client.
-
-`--enable-ospf-te'
- Enable support for OSPF Traffic Engineering Extension
- (internet-draft) this requires support for Opaque LSAs.
-
-`--enable-multipath=ARG'
- Enable support for Equal Cost Multipath. ARG is the maximum number
- of ECMP paths to allow, set to 0 to allow unlimited number of
- paths.
-
-`--enable-rtadv'
- Enable support IPV6 router advertisement in zebra.
-
- You may specify any combination of the above options to the configure
-script. By default, the executables are placed in `/usr/local/sbin'
-and the configuration files in `/usr/local/etc'. The `/usr/local/'
-installation prefix and other directories may be changed using the
-following options to the configuration script.
-
-`--prefix=PREFIX'
- Install architecture-independent files in PREFIX [/usr/local].
-
-`--sysconfdir=DIR'
- Look for configuration files in DIR [PREFIX/etc]. Note that sample
- configuration files will be installed here.
-
-`--localstatedir=DIR'
- Configure zebra to use DIR for local state files, such as pid
- files and unix sockets.
-
- % ./configure --disable-ipv6
-
- This command will configure zebra and the routing daemons.
-
-
-File: quagga.info, Node: Least-Privilege support, Next: Linux notes, Prev: The Configure script and its options, Up: Configure the Software
-
-2.1.2 Least-Privilege support
------------------------------
-
-Additionally, you may configure zebra to drop its elevated privileges
-shortly after startup and switch to another user. The configure script
-will automatically try to configure this support. There are three
-configure options to control the behaviour of Quagga daemons.
-
-`--enable-user=USER'
- Switch to user ARG shortly after startup, and run as user ARG in
- normal operation.
-
-`--enable-group=GROUP'
- Switch real and effective group to GROUP shortly after startup.
-
-`--enable-vty-group=GROUP'
- Create Unix Vty sockets (for use with vtysh) with group owndership
- set to GROUP. This allows one to create a seperate group which is
- restricted to accessing only the Vty sockets, hence allowing one to
- delegate this group to individual users, or to run vtysh setgid to
- this group.
-
- The default user and group which will be configured is 'quagga' if
-no user or group is specified. Note that this user or group requires
-write access to the local state directory (see -localstatedir) and
-requires at least read access, and write access if you wish to allow
-daemons to write out their configuration, to the configuration
-directory (see -sysconfdir).
-
- On systems which have the 'libcap' capabilities manipulation library
-(currently only linux), the quagga system will retain only minimal
-capabilities required, further it will only raise these capabilities for
-brief periods. On systems without libcap, quagga will run as the user
-specified and only raise its uid back to uid 0 for brief periods.
-
-
-File: quagga.info, Node: Linux notes, Prev: Least-Privilege support, Up: Configure the Software
-
-2.1.3 Linux Notes
------------------
-
-There are several options available only to GNU/Linux systems: (1). If
-you use GNU/Linux, make sure that the current kernel configuration is
-what you want. Quagga will run with any kernel configuration but some
-recommendations do exist.
-
-CONFIG_NETLINK
- Kernel/User netlink socket. This is a brand new feature which
- enables an advanced interface between the Linux kernel and zebra
- (*note Kernel Interface::).
-
-CONFIG_RTNETLINK
- Routing messages. This makes it possible to receive netlink
- routing messages. If you specify this option, `zebra' can detect
- routing information updates directly from the kernel (*note Kernel
- Interface::).
-
-CONFIG_IP_MULTICAST
- IP: multicasting. This option should be specified when you use
- `ripd' (*note RIP::) or `ospfd' (*note OSPFv2::) because these
- protocols use multicast.
-
-
- IPv6 support has been added in GNU/Linux kernel version 2.2. If you
-try to use the Quagga IPv6 feature on a GNU/Linux kernel, please make
-sure the following libraries have been installed. Please note that
-these libraries will not be needed when you uses GNU C library 2.1 or
-upper.
-
-`inet6-apps'
- The `inet6-apps' package includes basic IPv6 related libraries such
- as `inet_ntop' and `inet_pton'. Some basic IPv6 programs such as
- `ping', `ftp', and `inetd' are also included. The `inet-apps' can
- be found at `ftp://ftp.inner.net/pub/ipv6/'.
-
-`net-tools'
- The `net-tools' package provides an IPv6 enabled interface and
- routing utility. It contains `ifconfig', `route', `netstat', and
- other tools. `net-tools' may be found at
- `http://www.tazenda.demon.co.uk/phil/net-tools/'.
-
-
- ---------- Footnotes ----------
-
- (1) GNU/Linux has very flexible kernel configuration features
-
-
-File: quagga.info, Node: Build the Software, Next: Install the Software, Prev: Configure the Software, Up: Installation
-
-2.2 Build the Software
-======================
-
-After configuring the software, you will need to compile it for your
-system. Simply issue the command `make' in the root of the source
-directory and the software will be compiled. If you have *any* problems
-at this stage, be certain to send a bug report *Note Bug Reports::.
-
- % ./configure
- .
- .
- .
- ./configure output
- .
- .
- .
- % make
-
-
-File: quagga.info, Node: Install the Software, Prev: Build the Software, Up: Installation
-
-2.3 Install the Software
-========================
-
-Installing the software to your system consists of copying the compiled
-programs and supporting files to a standard location. After the
-installation process has completed, these files have been copied from
-your work directory to `/usr/local/bin', and `/usr/local/etc'.
-
- To install the Quagga suite, issue the following command at your
-shell prompt: `make install'.
-
- %
- % make install
- %
-
- Quagga daemons have their own terminal interface or VTY. After
-installation, you have to setup each beast's port number to connect to
-them. Please add the following entries to `/etc/services'.
-
- zebrasrv 2600/tcp # zebra service
- zebra 2601/tcp # zebra vty
- ripd 2602/tcp # RIPd vty
- ripngd 2603/tcp # RIPngd vty
- ospfd 2604/tcp # OSPFd vty
- bgpd 2605/tcp # BGPd vty
- ospf6d 2606/tcp # OSPF6d vty
- ospfapi 2607/tcp # ospfapi
- isisd 2608/tcp # ISISd vty
-
- If you use a FreeBSD newer than 2.2.8, the above entries are already
-added to `/etc/services' so there is no need to add it. If you specify
-a port number when starting the daemon, these entries may not be needed.
-
- You may need to make changes to the config files in
-`/etc/quagga/*.conf'. *Note Config Commands::.
-
-
-File: quagga.info, Node: Basic commands, Next: Zebra, Prev: Installation, Up: Top
-
-3 Basic commands
-****************
-
-There are five routing daemons in use, and there is one manager daemon.
-These daemons may be located on separate machines from the manager
-daemon. Each of these daemons will listen on a particular port for
-incoming VTY connections. The routing daemons are:
-
- * `ripd', `ripngd', `ospfd', `ospf6d', `bgpd'
-
- * `zebra'
-
- The following sections discuss commands common to all the routing
-daemons.
-
-* Menu:
-
-* Terminal Mode Commands:: Common commands used in a VTY
-* Config Commands:: Commands used in config files
-* Common Invocation Options:: Starting the daemons
-* Virtual Terminal Interfaces:: Interacting with the daemons
-
-
-File: quagga.info, Node: Config Commands, Next: Common Invocation Options, Prev: Terminal Mode Commands, Up: Basic commands
-
-3.1 Config Commands
-===================
-
-* Menu:
-
-* Basic Config Commands:: Some of the generic config commands
-* Sample Config File:: An example config file
-
- In a config file, you can write the debugging options, a vty's
-password, routing daemon configurations, a log file name, and so forth.
-This information forms the initial command set for a routing beast as
-it is starting.
-
- Config files are generally found in:
-
- `/etc/quagga/*.conf'
-
- Each of the daemons has its own config file. For example, zebra's
-default config file name is:
-
- `/etc/quagga/zebra.conf'
-
- The daemon name plus `.conf' is the default config file name. You
-can specify a config file using the `-f' or `--config-file' options
-when starting the daemon.
-
-
-File: quagga.info, Node: Basic Config Commands, Next: Sample Config File, Up: Config Commands
-
-3.1.1 Basic Config Commands
----------------------------
-
- -- Command: hostname HOSTNAME
- Set hostname of the router.
-
- -- Command: password PASSWORD
- Set password for vty interface. If there is no password, a vty
- won't accept connections.
-
- -- Command: enable password PASSWORD
- Set enable password.
-
- -- Command: log trap LEVEL
- -- Command: no log trap
- These commands are deprecated and are present only for historical
- compatibility. The log trap command sets the current logging
- level for all enabled logging destinations, and it sets the
- default for all future logging commands that do not specify a
- level. The normal default logging level is debugging. The `no'
- form of the command resets the default level for future logging
- commands to debugging, but it does not change the logging level of
- existing logging destinations.
-
- -- Command: log stdout
- -- Command: log stdout LEVEL
- -- Command: no log stdout
- Enable logging output to stdout. If the optional second argument
- specifying the logging level is not present, the default logging
- level (typically debugging, but can be changed using the
- deprecated `log trap' command) will be used. The `no' form of the
- command disables logging to stdout. The `level' argument must
- have one of these values: emergencies, alerts, critical, errors,
- warnings, notifications, informational, or debugging. Note that
- the existing code logs its most important messages with severity
- `errors'.
-
- -- Command: log file FILENAME
- -- Command: log file FILENAME LEVEL
- -- Command: no log file
- If you want to log into a file, please specify `filename' as in
- this example:
- log file /var/log/quagga/bgpd.log informational
- If the optional second argument specifying the logging level is
- not present, the default logging level (typically debugging, but
- can be changed using the deprecated `log trap' command) will be
- used. The `no' form of the command disables logging to a file.
-
- Note: if you do not configure any file logging, and a daemon
- crashes due to a signal or an assertion failure, it will attempt
- to save the crash information in a file named
- /var/tmp/quagga.<daemon name>.crashlog. For security reasons,
- this will not happen if the file exists already, so it is
- important to delete the file after reporting the crash information.
-
- -- Command: log syslog
- -- Command: log syslog LEVEL
- -- Command: no log syslog
- Enable logging output to syslog. If the optional second argument
- specifying the logging level is not present, the default logging
- level (typically debugging, but can be changed using the
- deprecated `log trap' command) will be used. The `no' form of the
- command disables logging to syslog.
-
- -- Command: log monitor
- -- Command: log monitor LEVEL
- -- Command: no log monitor
- Enable logging output to vty terminals that have enabled logging
- using the `terminal monitor' command. By default, monitor logging
- is enabled at the debugging level, but this command (or the
- deprecated `log trap' command) can be used to change the monitor
- logging level. If the optional second argument specifying the
- logging level is not present, the default logging level (typically
- debugging, but can be changed using the deprecated `log trap'
- command) will be used. The `no' form of the command disables
- logging to terminal monitors.
-
- -- Command: log facility FACILITY
- -- Command: no log facility
- This command changes the facility used in syslog messages. The
- default facility is `daemon'. The `no' form of the command resets
- the facility to the default `daemon' facility.
-
- -- Command: log record-priority
- -- Command: no log record-priority
- To include the severity in all messages logged to a file, to
- stdout, or to a terminal monitor (i.e. anything except syslog),
- use the `log record-priority' global configuration command. To
- disable this option, use the `no' form of the command. By default,
- the severity level is not included in logged messages. Note: some
- versions of syslogd (including Solaris) can be configured to
- include the facility and level in the messages emitted.
-
- -- Command: service password-encryption
- Encrypt password.
-
- -- Command: service advanced-vty
- Enable advanced mode VTY.
-
- -- Command: service terminal-length <0-512>
- Set system wide line configuration. This configuration command
- applies to all VTY interfaces.
-
- -- Command: line vty
- Enter vty configuration mode.
-
- -- Command: banner motd default
- Set default motd string.
-
- -- Command: no banner motd
- No motd banner string will be printed.
-
- -- Line Command: exec-timeout MINUTE
- -- Line Command: exec-timeout MINUTE SECOND
- Set VTY connection timeout value. When only one argument is
- specified it is used for timeout value in minutes. Optional
- second argument is used for timeout value in seconds. Default
- timeout value is 10 minutes. When timeout value is zero, it means
- no timeout.
-
- -- Line Command: no exec-timeout
- Do not perform timeout at all. This command is as same as
- `exec-timeout 0 0'.
-
- -- Line Command: access-class ACCESS-LIST
- Restrict vty connections with an access list.
-
-
-File: quagga.info, Node: Sample Config File, Prev: Basic Config Commands, Up: Config Commands
-
-3.1.2 Sample Config File
-------------------------
-
-Below is a sample configuration file for the zebra daemon.
-
- !
- ! Zebra configuration file
- !
- hostname Router
- password zebra
- enable password zebra
- !
- log stdout
- !
- !
-
- '!' and '#' are comment characters. If the first character of the
-word is one of the comment characters then from the rest of the line
-forward will be ignored as a comment.
-
- password zebra!password
-
- If a comment character is not the first character of the word, it's a
-normal character. So in the above example '!' will not be regarded as a
-comment and the password is set to 'zebra!password'.
-
-
-File: quagga.info, Node: Terminal Mode Commands, Next: Config Commands, Up: Basic commands
-
-3.2 Terminal Mode Commands
-==========================
-
- -- Command: write terminal
- Displays the current configuration to the vty interface.
-
- -- Command: write file
- Write current configuration to configuration file.
-
- -- Command: configure terminal
- Change to configuration mode. This command is the first step to
- configuration.
-
- -- Command: terminal length <0-512>
- Set terminal display length to <0-512>. If length is 0, no
- display control is performed.
-
- -- Command: who
- Show a list of currently connected vty sessions.
-
- -- Command: list
- List all available commands.
-
- -- Command: show version
- Show the current version of Quagga and its build host information.
-
- -- Command: show logging
- Shows the current configuration of the logging system. This
- includes the status of all logging destinations.
-
- -- Command: logmsg LEVEL MESSAGE
- Send a message to all logging destinations that are enabled for
- messages of the given severity.
-
-
-File: quagga.info, Node: Common Invocation Options, Next: Virtual Terminal Interfaces, Prev: Config Commands, Up: Basic commands
-
-3.3 Common Invocation Options
-=============================
-
-These options apply to all Quagga daemons.
-
-`-d'
-`--daemon'
- Runs in daemon mode.
-
-`-f FILE'
-`--config_file=FILE'
- Set configuration file name.
-
-`-h'
-`--help'
- Display this help and exit.
-
-`-i FILE'
-`--pid_file=FILE'
- Upon startup the process identifier of the daemon is written to a
- file, typically in `/var/run'. This file can be used by the init
- system to implement commands such as `.../init.d/zebra status',
- `.../init.d/zebra restart' or `.../init.d/zebra stop'.
-
- The file name is an run-time option rather than a configure-time
- option so that multiple routing daemons can be run simultaneously.
- This is useful when using Quagga to implement a routing looking
- glass. One machine can be used to collect differing routing views
- from differing points in the network.
-
-`-A ADDRESS'
-`--vty_addr=ADDRESS'
- Set the VTY local address to bind to. If set, the VTY socket will
- only be bound to this address.
-
-`-P PORT'
-`--vty_port=PORT'
- Set the VTY TCP port number. If set to 0 then the TCP VTY sockets
- will not be opened.
-
-`-u USER'
-`--vty_addr=USER'
- Set the user and group to run as.
-
-`-v'
-`--version'
- Print program version.
-
-
-
-File: quagga.info, Node: Virtual Terminal Interfaces, Prev: Common Invocation Options, Up: Basic commands
-
-3.4 Virtual Terminal Interfaces
-===============================
-
-VTY - Virtual Terminal [aka TeletYpe] Interface is a command line
-interface (CLI) for user interaction with the routing daemon.
-
-* Menu:
-
-* VTY Overview:: Basics about VTYs
-* VTY Modes:: View, Enable, and Other VTY modes
-* VTY CLI Commands:: Commands for movement, edition, and management
-
-
-File: quagga.info, Node: VTY Overview, Next: VTY Modes, Up: Virtual Terminal Interfaces
-
-3.4.1 VTY Overview
-------------------
-
-VTY stands for Virtual TeletYpe interface. It means you can connect to
-the daemon via the telnet protocol.
-
- To enable a VTY interface, you have to setup a VTY password. If
-there is no VTY password, one cannot connect to the VTY interface at
-all.
-
- % telnet localhost 2601
- Trying 127.0.0.1...
- Connected to localhost.
- Escape character is '^]'.
-
- Hello, this is Quagga (version 0.99.4)
- Copyright (C) 1999-2005 Kunihiro Ishiguro, et al.
-
- User Access Verification
-
- Password: XXXXX
- Router> ?
- enable Turn on privileged commands
- exit Exit current mode and down to previous mode
- help Description of the interactive help system
- list Print command list
- show Show running system information
- who Display who is on a vty
- Router> enable
- Password: XXXXX
- Router# configure terminal
- Router(config)# interface eth0
- Router(config-if)# ip address 10.0.0.1/8
- Router(config-if)# ^Z
- Router#
-
- '?' is very useful for looking up commands.
-
-
-File: quagga.info, Node: VTY Modes, Next: VTY CLI Commands, Prev: VTY Overview, Up: Virtual Terminal Interfaces
-
-3.4.2 VTY Modes
----------------
-
-There are three basic VTY modes:
-
-* Menu:
-
-* VTY View Mode:: Mode for read-only interaction
-* VTY Enable Mode:: Mode for read-write interaction
-* VTY Other Modes:: Special modes (tftp, etc)
-
- There are commands that may be restricted to specific VTY modes.
-
-
-File: quagga.info, Node: VTY View Mode, Next: VTY Enable Mode, Up: VTY Modes
-
-3.4.2.1 VTY View Mode
-.....................
-
-This mode is for read-only access to the CLI. One may exit the mode by
-leaving the system, or by entering `enable' mode.
-
-
-File: quagga.info, Node: VTY Enable Mode, Next: VTY Other Modes, Prev: VTY View Mode, Up: VTY Modes
-
-3.4.2.2 VTY Enable Mode
-.......................
-
-This mode is for read-write access to the CLI. One may exit the mode by
-leaving the system, or by escaping to view mode.
-
-
-File: quagga.info, Node: VTY Other Modes, Prev: VTY Enable Mode, Up: VTY Modes
-
-3.4.2.3 VTY Other Modes
-.......................
-
-This page is for describing other modes.
-
-
-File: quagga.info, Node: VTY CLI Commands, Prev: VTY Modes, Up: Virtual Terminal Interfaces
-
-3.4.3 VTY CLI Commands
-----------------------
-
-Commands that you may use at the command-line are described in the
-following three subsubsections.
-
-* Menu:
-
-* CLI Movement Commands:: Commands for moving the cursor about
-* CLI Editing Commands:: Commands for changing text
-* CLI Advanced Commands:: Other commands, session management and so on
-
-
-File: quagga.info, Node: CLI Movement Commands, Next: CLI Editing Commands, Up: VTY CLI Commands
-
-3.4.3.1 CLI Movement Commands
-.............................
-
-These commands are used for moving the CLI cursor. The <C> character
-means press the Control Key.
-
-`C-f'
-`<RIGHT>'
- Move forward one character.
-
-`C-b'
-`<LEFT>'
- Move backward one character.
-
-`M-f'
- Move forward one word.
-
-`M-b'
- Move backward one word.
-
-`C-a'
- Move to the beginning of the line.
-
-`C-e'
- Move to the end of the line.
-
-
-
-File: quagga.info, Node: CLI Editing Commands, Next: CLI Advanced Commands, Prev: CLI Movement Commands, Up: VTY CLI Commands
-
-3.4.3.2 CLI Editing Commands
-............................
-
-These commands are used for editing text on a line. The <C> character
-means press the Control Key.
-
-`C-h'
-`<DEL>'
- Delete the character before point.
-
-`C-d'
- Delete the character after point.
-
-`M-d'
- Forward kill word.
-
-`C-w'
- Backward kill word.
-
-`C-k'
- Kill to the end of the line.
-
-`C-u'
- Kill line from the beginning, erasing input.
-
-`C-t'
- Transpose character.
-
-
-
-File: quagga.info, Node: CLI Advanced Commands, Prev: CLI Editing Commands, Up: VTY CLI Commands
-
-3.4.3.3 CLI Advanced Commands
-.............................
-
-There are several additional CLI commands for command line completions,
-insta-help, and VTY session management.
-
-`C-c'
- Interrupt current input and moves to the next line.
-
-`C-z'
- End current configuration session and move to top node.
-
-`C-n'
-`<DOWN>'
- Move down to next line in the history buffer.
-
-`C-p'
-`<UP>'
- Move up to previous line in the history buffer.
-
-`TAB'
- Use command line completion by typing <TAB>.
-
-`'
- You can use command line help by typing `help' at the beginning of
- the line. Typing `?' at any point in the line will show possible
- completions.
-
-
-
-File: quagga.info, Node: Zebra, Next: RIP, Prev: Basic commands, Up: Top
-
-4 Zebra
-*******
-
-`zebra' is an IP routing manager. It provides kernel routing table
-updates, interface lookups, and redistribution of routes between
-different routing protocols.
-
-* Menu:
-
-* Invoking zebra:: Running the program
-* Interface Commands:: Commands for zebra interfaces
-* Static Route Commands:: Commands for adding static routes
-* zebra Terminal Mode Commands:: Commands for zebra's VTY
-
-
-File: quagga.info, Node: Invoking zebra, Next: Interface Commands, Up: Zebra
-
-4.1 Invoking zebra
-==================
-
-Besides the common invocation options (*note Common Invocation
-Options::), the `zebra' specific invocation options are listed below.
-
-`-b'
-`--batch'
- Runs in batch mode. `zebra' parses configuration file and
- terminates immediately.
-
-`-k'
-`--keep_kernel'
- When zebra starts up, don't delete old self inserted routes.
-
-`-r'
-`--retain'
- When program terminates, retain routes added by zebra.
-
-
-
-File: quagga.info, Node: Interface Commands, Next: Static Route Commands, Prev: Invoking zebra, Up: Zebra
-
-4.2 Interface Commands
-======================
-
- -- Command: interface IFNAME
-
- -- Interface Command: shutdown
- -- Interface Command: no shutdown
- Up or down the current interface.
-
- -- Interface Command: ip address ADDRESS/PREFIX
- -- Interface Command: ip6 address ADDRESS/PREFIX
- -- Interface Command: no ip address ADDRESS/PREFIX
- -- Interface Command: no ip6 address ADDRESS/PREFIX
- Set the IPv4 or IPv6 address/prefix for the interface.
-
- -- Interface Command: ip address ADDRESS/PREFIX secondary
- -- Interface Command: no ip address ADDRESS/PREFIX secondary
- Set the secondary flag for this address. This causes ospfd to not
- treat the address as a distinct subnet.
-
- -- Interface Command: description DESCRIPTION ...
- Set description for the interface.
-
- -- Interface Command: multicast
- -- Interface Command: no multicast
- Enable or disables multicast flag for the interface.
-
- -- Interface Command: bandwidth <1-10000000>
- -- Interface Command: no bandwidth <1-10000000>
- Set bandwidth value of the interface in kilobits/sec. This is for
- calculating OSPF cost. This command does not affect the actual
- device configuration.
-
- -- Interface Command: link-detect
- -- Interface Command: no link-detect
- Enable/disable link-detect on platforms which support this.
- Currently only linux and with certain drivers - those which
- properly support the IFF_RUNNING flag.
-
-
-File: quagga.info, Node: Static Route Commands, Next: zebra Terminal Mode Commands, Prev: Interface Commands, Up: Zebra
-
-4.3 Static Route Commands
-=========================
-
-Static routing is a very fundamental feature of routing technology. It
-defines static prefix and gateway.
-
- -- Command: ip route NETWORK GATEWAY
- NETWORK is destination prefix with format of A.B.C.D/M. GATEWAY
- is gateway for the prefix. When GATEWAY is A.B.C.D format. It is
- taken as a IPv4 address gateway. Otherwise it is treated as an
- interface name. If the interface name is NULL0 then zebra installs
- a blackhole route.
-
- ip route 10.0.0.0/8 10.0.0.2
- ip route 10.0.0.0/8 ppp0
- ip route 10.0.0.0/8 null0
-
- First example defines 10.0.0.0/8 static route with gateway
- 10.0.0.2. Second one defines the same prefix but with gateway to
- interface ppp0. The third install a blackhole route.
-
- -- Command: ip route NETWORK NETMASK GATEWAY
- This is alternate version of above command. When NETWORK is
- A.B.C.D format, user must define NETMASK value with A.B.C.D
- format. GATEWAY is same option as above command
-
- ip route 10.0.0.0 255.255.255.0 10.0.0.2
- ip route 10.0.0.0 255.255.255.0 ppp0
- ip route 10.0.0.0 255.255.255.0 null0
-
- These statements are equivalent to those in the previous example.
-
- -- Command: ip route NETWORK GATEWAY DISTANCE
- Installs the route with the specified distance.
-
- Multiple nexthop static route
-
- ip route 10.0.0.1/32 10.0.0.2
- ip route 10.0.0.1/32 10.0.0.3
- ip route 10.0.0.1/32 eth0
-
- If there is no route to 10.0.0.2 and 10.0.0.3, and interface eth0 is
-reachable, then the last route is installed into the kernel.
-
- If zebra has been compiled with multipath support, and both 10.0.0.2
-and 10.0.0.3 are reachable, zebra will install a multipath route via
-both nexthops, if the platform supports this.
-
- zebra> show ip route
- S> 10.0.0.1/32 [1/0] via 10.0.0.2 inactive
- via 10.0.0.3 inactive
- * is directly connected, eth0
-
- ip route 10.0.0.0/8 10.0.0.2
- ip route 10.0.0.0/8 10.0.0.3
- ip route 10.0.0.0/8 null0 255
-
- This will install a multihop route via the specified next-hops if
-they are reachable, as well as a high-metric blackhole route, which can
-be useful to prevent traffic destined for a prefix to match
-less-specific routes (eg default) should the specified gateways not be
-reachable. Eg:
-
- zebra> show ip route 10.0.0.0/8
- Routing entry for 10.0.0.0/8
- Known via "static", distance 1, metric 0
- 10.0.0.2 inactive
- 10.0.0.3 inactive
-
- Routing entry for 10.0.0.0/8
- Known via "static", distance 255, metric 0
- directly connected, Null0
-
- -- Command: ipv6 route NETWORK GATEWAY
- -- Command: ipv6 route NETWORK GATEWAY DISTANCE
- These behave similarly to their ipv4 counterparts.
-
- -- Command: table TABLENO
- Select the primary kernel routing table to be used. This only
- works for kernels supporting multiple routing tables (like
- GNU/Linux 2.2.x and later). After setting TABLENO with this
- command, static routes defined after this are added to the
- specified table.
-
-
-File: quagga.info, Node: zebra Terminal Mode Commands, Prev: Static Route Commands, Up: Zebra
-
-4.4 zebra Terminal Mode Commands
-================================
-
- -- Command: show ip route
- Display current routes which zebra holds in its database.
-
- Router# show ip route
- Codes: K - kernel route, C - connected, S - static, R - RIP,
- B - BGP * - FIB route.
-
- K* 0.0.0.0/0 203.181.89.241
- S 0.0.0.0/0 203.181.89.1
- C* 127.0.0.0/8 lo
- C* 203.181.89.240/28 eth0
-
- -- Command: show ipv6 route
-
- -- Command: show interface
-
- -- Command: show ipforward
- Display whether the host's IP forwarding function is enabled or
- not. Almost any UNIX kernel can be configured with IP forwarding
- disabled. If so, the box can't work as a router.
-
- -- Command: show ipv6forward
- Display whether the host's IP v6 forwarding is enabled or not.
-
-
-File: quagga.info, Node: RIP, Next: RIPng, Prev: Zebra, Up: Top
-
-5 RIP
-*****
-
-RIP - Routing Information Protocol is widely deployed interior gateway
-protocol. RIP was developed in the 1970s at Xerox Labs as part of the
-XNS routing protocol. RIP is a "distance-vector" protocol and is based
-on the "Bellman-Ford" algorithms. As a distance-vector protocol, RIP
-router send updates to its neighbors periodically, thus allowing the
-convergence to a known topology. In each update, the distance to any
-given network will be broadcasted to its neighboring router.
-
- `ripd' supports RIP version 2 as described in RFC2453 and RIP
-version 1 as described in RFC1058.
-
-* Menu:
-
-* Starting and Stopping ripd::
-* RIP Configuration::
-* RIP Version Control::
-* How to Announce RIP route::
-* Filtering RIP Routes::
-* RIP Metric Manipulation::
-* RIP distance::
-* RIP route-map::
-* RIP Authentication::
-* RIP Timers::
-* Show RIP Information::
-* RIP Debug Commands::
-
-
-File: quagga.info, Node: Starting and Stopping ripd, Next: RIP Configuration, Up: RIP
-
-5.1 Starting and Stopping ripd
-==============================
-
-The default configuration file name of `ripd''s is `ripd.conf'. When
-invocation `ripd' searches directory /etc/quagga. If `ripd.conf' is
-not there next search current directory.
-
- RIP uses UDP port 520 to send and receive RIP packets. So the user
-must have the capability to bind the port, generally this means that
-the user must have superuser privileges. RIP protocol requires
-interface information maintained by `zebra' daemon. So running `zebra'
-is mandatory to run `ripd'. Thus minimum sequence for running RIP is
-like below:
-
- # zebra -d
- # ripd -d
-
- Please note that `zebra' must be invoked before `ripd'.
-
- To stop `ripd'. Please use `kill `cat /var/run/ripd.pid`'. Certain
-signals have special meaningss to `ripd'.
-
-`SIGHUP'
- Reload configuration file `ripd.conf'. All configurations are
- reseted. All routes learned so far are cleared and removed from
- routing table.
-
-`SIGUSR1'
- Rotate `ripd' logfile.
-
-`SIGINT'
-`SIGTERM'
- `ripd' sweeps all installed RIP routes then terminates properly.
-
- `ripd' invocation options. Common options that can be specified
-(*note Common Invocation Options::).
-
-`-r'
-`--retain'
- When the program terminates, retain routes added by `ripd'.
-
-* Menu:
-
-* RIP netmask::
-
-
-File: quagga.info, Node: RIP netmask, Up: Starting and Stopping ripd
-
-5.1.1 RIP netmask
------------------
-
-The netmask features of `ripd' support both version 1 and version 2 of
-RIP. Version 1 of RIP originally contained no netmask information. In
-RIP version 1, network classes were originally used to determine the
-size of the netmask. Class A networks use 8 bits of mask, Class B
-networks use 16 bits of masks, while Class C networks use 24 bits of
-mask. Today, the most widely used method of a network mask is assigned
-to the packet on the basis of the interface that received the packet.
-Version 2 of RIP supports a variable length subnet mask (VLSM). By
-extending the subnet mask, the mask can be divided and reused. Each
-subnet can be used for different purposes such as large to middle size
-LANs and WAN links. Quagga `ripd' does not support the non-sequential
-netmasks that are included in RIP Version 2.
-
- In a case of similar information with the same prefix and metric, the
-old information will be suppressed. Ripd does not currently support
-equal cost multipath routing.
-
-
-File: quagga.info, Node: RIP Configuration, Next: RIP Version Control, Prev: Starting and Stopping ripd, Up: RIP
-
-5.2 RIP Configuration
-=====================
-
- -- Command: router rip
- The `router rip' command is necessary to enable RIP. To disable
- RIP, use the `no router rip' command. RIP must be enabled before
- carrying out any of the RIP commands.
-
- -- Command: no router rip
- Disable RIP.
-
- -- RIP Command: network NETWORK
- -- RIP Command: no network NETWORK
- Set the RIP enable interface by NETWORK. The interfaces which
- have addresses matching with NETWORK are enabled.
-
- This group of commands either enables or disables RIP interfaces
- between certain numbers of a specified network address. For
- example, if the network for 10.0.0.0/24 is RIP enabled, this would
- result in all the addresses from 10.0.0.0 to 10.0.0.255 being
- enabled for RIP. The `no network' command will disable RIP for
- the specified network.
-
- -- RIP Command: network IFNAME
- -- RIP Command: no network IFNAME
- Set a RIP enabled interface by IFNAME. Both the sending and
- receiving of RIP packets will be enabled on the port specified in
- the `network ifname' command. The `no network ifname' command
- will disable RIP on the specified interface.
-
- -- RIP Command: neighbor A.B.C.D
- -- RIP Command: no neighbor A.B.C.D
- Specify RIP neighbor. When a neighbor doesn't understand
- multicast, this command is used to specify neighbors. In some
- cases, not all routers will be able to understand multicasting,
- where packets are sent to a network or a group of addresses. In a
- situation where a neighbor cannot process multicast packets, it is
- necessary to establish a direct link between routers. The
- neighbor command allows the network administrator to specify a
- router as a RIP neighbor. The `no neighbor a.b.c.d' command will
- disable the RIP neighbor.
-
- Below is very simple RIP configuration. Interface `eth0' and
-interface which address match to `10.0.0.0/8' are RIP enabled.
-
- !
- router rip
- network 10.0.0.0/8
- network eth0
- !
-
- Passive interface
-
- -- RIP command: passive-interface (IFNAME|default)
- -- RIP command: no passive-interface IFNAME
- This command sets the specified interface to passive mode. On
- passive mode interface, all receiving packets are processed as
- normal and ripd does not send either multicast or unicast RIP
- packets except to RIP neighbors specified with `neighbor' command.
- The interface may be specified as DEFAULT to make ripd default to
- passive on all interfaces.
-
- The default is to be passive on all interfaces.
-
- RIP split-horizon
-
- -- Interface command: ip split-horizon
- -- Interface command: no ip split-horizon
- Control split-horizon on the interface. Default is `ip
- split-horizon'. If you don't perform split-horizon on the
- interface, please specify `no ip split-horizon'.
-
-
-File: quagga.info, Node: RIP Version Control, Next: How to Announce RIP route, Prev: RIP Configuration, Up: RIP
-
-5.3 RIP Version Control
-=======================
-
-RIP can be configured to send either Version 1 or Version 2 packets.
-The default is to send RIPv2 while accepting both RIPv1 and RIPv2 (and
-replying with packets of the appropriate version for REQUESTS /
-triggered updates). The version to receive and send can be specified
-globally, and further overriden on a per-interface basis if needs be
-for send and receive seperately (see below).
-
- It is important to note that RIPv1 can not be authenticated. Further,
-if RIPv1 is enabled then RIP will reply to REQUEST packets, sending the
-state of its RIP routing table to any remote routers that ask on
-demand. For a more detailed discussion on the security implications of
-RIPv1 see *Note RIP Authentication::.
-
- -- RIP Command: version VERSION
- Set RIP version to accept for reads and send. VERSION can be
- either `1" or `2".
-
- Disabling RIPv1 by specifying version 2 is STRONGLY encouraged,
- *Note RIP Authentication::. This may become the default in a future
- release.
-
- Default: Send Version 2, and accept either version.
-
- -- RIP Command: no version
- Reset the global version setting back to the default.
-
- -- Interface command: ip rip send version VERSION
- VERSION can be `1', `2' or `1 2'.
-
- This interface command overrides the global rip version setting,
- and selects which version of RIP to send packets with, for this
- interface specifically. Choice of RIP Version 1, RIP Version 2, or
- both versions. In the latter case, where `1 2' is specified,
- packets will be both broadcast and multicast.
-
- Default: Send packets according to the global version (version 2)
-
- -- Interface command: ip rip receive version VERSION
- VERSION can be `1', `2' or `1 2'.
-
- This interface command overrides the global rip version setting,
- and selects which versions of RIP packets will be accepted on this
- interface. Choice of RIP Version 1, RIP Version 2, or both.
-
- Default: Accept packets according to the global setting (both 1
- and 2).
-
-
-File: quagga.info, Node: How to Announce RIP route, Next: Filtering RIP Routes, Prev: RIP Version Control, Up: RIP
-
-5.4 How to Announce RIP route
-=============================
-
- -- RIP command: redistribute kernel
- -- RIP command: redistribute kernel metric <0-16>
- -- RIP command: redistribute kernel route-map ROUTE-MAP
- -- RIP command: no redistribute kernel
- `redistribute kernel' redistributes routing information from
- kernel route entries into the RIP tables. `no redistribute kernel'
- disables the routes.
-
- -- RIP command: redistribute static
- -- RIP command: redistribute static metric <0-16>
- -- RIP command: redistribute static route-map ROUTE-MAP
- -- RIP command: no redistribute static
- `redistribute static' redistributes routing information from
- static route entries into the RIP tables. `no redistribute static'
- disables the routes.
-
- -- RIP command: redistribute connected
- -- RIP command: redistribute connected metric <0-16>
- -- RIP command: redistribute connected route-map ROUTE-MAP
- -- RIP command: no redistribute connected
- Redistribute connected routes into the RIP tables. `no
- redistribute connected' disables the connected routes in the RIP
- tables. This command redistribute connected of the interface
- which RIP disabled. The connected route on RIP enabled interface
- is announced by default.
-
- -- RIP command: redistribute ospf
- -- RIP command: redistribute ospf metric <0-16>
- -- RIP command: redistribute ospf route-map ROUTE-MAP
- -- RIP command: no redistribute ospf
- `redistribute ospf' redistributes routing information from ospf
- route entries into the RIP tables. `no redistribute ospf' disables
- the routes.
-
- -- RIP command: redistribute bgp
- -- RIP command: redistribute bgp metric <0-16>
- -- RIP command: redistribute bgp route-map ROUTE-MAP
- -- RIP command: no redistribute bgp
- `redistribute bgp' redistributes routing information from bgp
- route entries into the RIP tables. `no redistribute bgp' disables
- the routes.
-
- If you want to specify RIP only static routes:
-
- -- RIP command: default-information originate
-
- -- RIP command: route A.B.C.D/M
- -- RIP command: no route A.B.C.D/M
- This command is specific to Quagga. The `route' command makes a
- static route only inside RIP. This command should be used only by
- advanced users who are particularly knowledgeable about the RIP
- protocol. In most cases, we recommend creating a static route in
- Quagga and redistributing it in RIP using `redistribute static'.
-
-
-File: quagga.info, Node: Filtering RIP Routes, Next: RIP Metric Manipulation, Prev: How to Announce RIP route, Up: RIP
-
-5.5 Filtering RIP Routes
-========================
-
-RIP routes can be filtered by a distribute-list.
-
- -- Command: distribute-list ACCESS_LIST DIRECT IFNAME
- You can apply access lists to the interface with a
- `distribute-list' command. ACCESS_LIST is the access list name.
- DIRECT is `in' or `out'. If DIRECT is `in' the access list is
- applied to input packets.
-
- The `distribute-list' command can be used to filter the RIP path.
- `distribute-list' can apply access-lists to a chosen interface.
- First, one should specify the access-list. Next, the name of the
- access-list is used in the distribute-list command. For example,
- in the following configuration `eth0' will permit only the paths
- that match the route 10.0.0.0/8
-
- !
- router rip
- distribute-list private in eth0
- !
- access-list private permit 10 10.0.0.0/8
- access-list private deny any
- !
-
- `distribute-list' can be applied to both incoming and outgoing data.
-
- -- Command: distribute-list prefix PREFIX_LIST (in|out) IFNAME
- You can apply prefix lists to the interface with a
- `distribute-list' command. PREFIX_LIST is the prefix list name.
- Next is the direction of `in' or `out'. If DIRECT is `in' the
- access list is applied to input packets.
-
-
-File: quagga.info, Node: RIP Metric Manipulation, Next: RIP distance, Prev: Filtering RIP Routes, Up: RIP
-
-5.6 RIP Metric Manipulation
-===========================
-
-RIP metric is a value for distance for the network. Usually `ripd'
-increment the metric when the network information is received.
-Redistributed routes' metric is set to 1.
-
- -- RIP command: default-metric <1-16>
- -- RIP command: no default-metric <1-16>
- This command modifies the default metric value for redistributed
- routes. The default value is 1. This command does not affect
- connected route even if it is redistributed by `redistribute
- connected'. To modify connected route's metric value, please use
- `redistribute connected metric' or `route-map'. `offset-list' also
- affects connected routes.
-
- -- RIP command: offset-list ACCESS-LIST (in|out)
- -- RIP command: offset-list ACCESS-LIST (in|out) IFNAME
-
-
-File: quagga.info, Node: RIP distance, Next: RIP route-map, Prev: RIP Metric Manipulation, Up: RIP
-
-5.7 RIP distance
-================
-
-Distance value is used in zebra daemon. Default RIP distance is 120.
-
- -- RIP command: distance <1-255>
- -- RIP command: no distance <1-255>
- Set default RIP distance to specified value.
-
- -- RIP command: distance <1-255> A.B.C.D/M
- -- RIP command: no distance <1-255> A.B.C.D/M
- Set default RIP distance to specified value when the route's
- source IP address matches the specified prefix.
-
- -- RIP command: distance <1-255> A.B.C.D/M ACCESS-LIST
- -- RIP command: no distance <1-255> A.B.C.D/M ACCESS-LIST
- Set default RIP distance to specified value when the route's
- source IP address matches the specified prefix and the specified
- access-list.
-
-
-File: quagga.info, Node: RIP route-map, Next: RIP Authentication, Prev: RIP distance, Up: RIP
-
-5.8 RIP route-map
-=================
-
-Usage of `ripd''s route-map support.
-
- Optional argument route-map MAP_NAME can be added to each
-`redistribute' statement.
-
- redistribute static [route-map MAP_NAME]
- redistribute connected [route-map MAP_NAME]
- .....
-
- Cisco applies route-map _before_ routes will exported to rip route
-table. In current Quagga's test implementation, `ripd' applies
-route-map after routes are listed in the route table and before routes
-will be announced to an interface (something like output filter). I
-think it is not so clear, but it is draft and it may be changed at
-future.
-
- Route-map statement (*note Route Map::) is needed to use route-map
-functionality.
-
- -- Route Map: match interface WORD
- This command match to incoming interface. Notation of this match
- is different from Cisco. Cisco uses a list of interfaces - NAME1
- NAME2 ... NAMEN. Ripd allows only one name (maybe will change in
- the future). Next - Cisco means interface which includes next-hop
- of routes (it is somewhat similar to "ip next-hop" statement).
- Ripd means interface where this route will be sent. This
- difference is because "next-hop" of same routes which sends to
- different interfaces must be different. Maybe it'd be better to
- made new matches - say "match interface-out NAME" or something
- like that.
-
- -- Route Map: match ip address WORD
- -- Route Map: match ip address prefix-list WORD
- Match if route destination is permitted by access-list.
-
- -- Route Map: match ip next-hop A.B.C.D
- Cisco uses here <access-list>, `ripd' IPv4 address. Match if route
- has this next-hop (meaning next-hop listed in the rip route table
- - "show ip rip")
-
- -- Route Map: match metric <0-4294967295>
- This command match to the metric value of RIP updates. For other
- protocol compatibility metric range is shown as <0-4294967295>.
- But for RIP protocol only the value range <0-16> make sense.
-
- -- Route Map: set ip next-hop A.B.C.D
- This command set next hop value in RIPv2 protocol. This command
- does not affect RIPv1 because there is no next hop field in the
- packet.
-
- -- Route Map: set metric <0-4294967295>
- Set a metric for matched route when sending announcement. The
- metric value range is very large for compatibility with other
- protocols. For RIP, valid metric values are from 1 to 16.
-
-
-File: quagga.info, Node: RIP Authentication, Next: RIP Timers, Prev: RIP route-map, Up: RIP
-
-5.9 RIP Authentication
-======================
-
-RIPv2 allows packets to be authenticated via either an insecure plain
-text password, included with the packet, or via a more secure MD5 based
-HMAC (keyed-Hashing for Message AuthentiCation), RIPv1 can not be
-authenticated at all, thus when authentication is configured `ripd'
-will discard routing updates received via RIPv1 packets.
-
- However, unless RIPv1 reception is disabled entirely, *Note RIP
-Version Control::, RIPv1 REQUEST packets which are received, which
-query the router for routing information, will still be honoured by
-`ripd', and `ripd' WILL reply to such packets. This allows `ripd' to
-honour such REQUESTs (which sometimes is used by old equipment and very
-simple devices to bootstrap their default route), while still providing
-security for route updates which are received.
-
- In short: Enabling authentication prevents routes being updated by
-unauthenticated remote routers, but still can allow routes (I.e. the
-entire RIP routing table) to be queried remotely, potentially by anyone
-on the internet, via RIPv1.
-
- To prevent such unauthenticated querying of routes disable RIPv1,
-*Note RIP Version Control::.
-
- -- Interface command: ip rip authentication mode md5
- -- Interface command: no ip rip authentication mode md5
- Set the interface with RIPv2 MD5 authentication.
-
- -- Interface command: ip rip authentication mode text
- -- Interface command: no ip rip authentication mode text
- Set the interface with RIPv2 simple password authentication.
-
- -- Interface command: ip rip authentication string STRING
- -- Interface command: no ip rip authentication string STRING
- RIP version 2 has simple text authentication. This command sets
- authentication string. The string must be shorter than 16
- characters.
-
- -- Interface command: ip rip authentication key-chain KEY-CHAIN
- -- Interface command: no ip rip authentication key-chain KEY-CHAIN
- Specifiy Keyed MD5 chain.
-
- !
- key chain test
- key 1
- key-string test
- !
- interface eth1
- ip rip authentication mode md5
- ip rip authentication key-chain test
- !
-
-
-File: quagga.info, Node: RIP Timers, Next: Show RIP Information, Prev: RIP Authentication, Up: RIP
-
-5.10 RIP Timers
-===============
-
- -- RIP command: timers basic UPDATE TIMEOUT GARBAGE
- RIP protocol has several timers. User can configure those timers'
- values by `timers basic' command.
-
- The default settings for the timers are as follows:
-
- * The update timer is 30 seconds. Every update timer seconds,
- the RIP process is awakened to send an unsolicited Response
- message containing the complete routing table to all
- neighboring RIP routers.
-
- * The timeout timer is 180 seconds. Upon expiration of the
- timeout, the route is no longer valid; however, it is
- retained in the routing table for a short time so that
- neighbors can be notified that the route has been dropped.
-
- * The garbage collect timer is 120 seconds. Upon expiration of
- the garbage-collection timer, the route is finally removed
- from the routing table.
-
-
- The `timers basic' command allows the the default values of the
- timers listed above to be changed.
-
- -- RIP command: no timers basic
- The `no timers basic' command will reset the timers to the default
- settings listed above.
-
-
-File: quagga.info, Node: Show RIP Information, Next: RIP Debug Commands, Prev: RIP Timers, Up: RIP
-
-5.11 Show RIP Information
-=========================
-
-To display RIP routes.
-
- -- Command: show ip rip
- Show RIP routes.
-
- The command displays all RIP routes. For routes that are received
-through RIP, this command will display the time the packet was sent and
-the tag information. This command will also display this information
-for routes redistributed into RIP.
-
- -- Command: show ip protocols
- The command displays current RIP status. It includes RIP timer,
- filtering, version, RIP enabled interface and RIP peer inforation.
-
- ripd> show ip protocols
- Routing Protocol is "rip"
- Sending updates every 30 seconds with +/-50%, next due in 35 seconds
- Timeout after 180 seconds, garbage collect after 120 seconds
- Outgoing update filter list for all interface is not set
- Incoming update filter list for all interface is not set
- Default redistribution metric is 1
- Redistributing: kernel connected
- Default version control: send version 2, receive version 2
- Interface Send Recv
- Routing for Networks:
- eth0
- eth1
- 1.1.1.1
- 203.181.89.241
- Routing Information Sources:
- Gateway BadPackets BadRoutes Distance Last Update
-
-
-File: quagga.info, Node: RIP Debug Commands, Prev: Show RIP Information, Up: RIP
-
-5.12 RIP Debug Commands
-=======================
-
-Debug for RIP protocol.
-
- -- Command: debug rip events
- Debug rip events.
-
- `debug rip' will show RIP events. Sending and receiving packets,
-timers, and changes in interfaces are events shown with `ripd'.
-
- -- Command: debug rip packet
- Debug rip packet.
-
- `debug rip packet' will display detailed information about the RIP
-packets. The origin and port number of the packet as well as a packet
-dump is shown.
-
- -- Command: debug rip zebra
- Debug rip between zebra communication.
-
- This command will show the communication between `ripd' and `zebra'.
-The main information will include addition and deletion of paths to
-the kernel and the sending and receiving of interface information.
-
- -- Command: show debugging rip
- Display `ripd''s debugging option.
-
- `show debugging rip' will show all information currently set for ripd
-debug.
-
-
-File: quagga.info, Node: RIPng, Next: OSPFv2, Prev: RIP, Up: Top
-
-6 RIPng
-*******
-
-`ripngd' supports the RIPng protocol as described in RFC2080. It's an
-IPv6 reincarnation of the RIP protocol.
-
-* Menu:
-
-* Invoking ripngd::
-* ripngd Configuration::
-* ripngd Terminal Mode Commands::
-* ripngd Filtering Commands::
-
-
-File: quagga.info, Node: Invoking ripngd, Next: ripngd Configuration, Up: RIPng
-
-6.1 Invoking ripngd
-===================
-
-There are no `ripngd' specific invocation options. Common options can
-be specified (*note Common Invocation Options::).
-
-
-File: quagga.info, Node: ripngd Configuration, Next: ripngd Terminal Mode Commands, Prev: Invoking ripngd, Up: RIPng
-
-6.2 ripngd Configuration
-========================
-
-Currently ripngd supports the following commands:
-
- -- Command: router ripng
- Enable RIPng.
-
- -- RIPng Command: flush_timer TIME
- Set flush timer.
-
- -- RIPng Command: network NETWORK
- Set RIPng enabled interface by NETWORK
-
- -- RIPng Command: network IFNAME
- Set RIPng enabled interface by IFNAME
-
- -- RIPng Command: route NETWORK
- Set RIPng static routing announcement of NETWORK.
-
- -- Command: router zebra
- This command is the default and does not appear in the
- configuration. With this statement, RIPng routes go to the
- `zebra' daemon.
-
-
-File: quagga.info, Node: ripngd Terminal Mode Commands, Next: ripngd Filtering Commands, Prev: ripngd Configuration, Up: RIPng
-
-6.3 ripngd Terminal Mode Commands
-=================================
-
- -- Command: show ip ripng
-
- -- Command: show debugging ripng
-
- -- Command: debug ripng events
-
- -- Command: debug ripng packet
-
- -- Command: debug ripng zebra
-
-
-File: quagga.info, Node: ripngd Filtering Commands, Prev: ripngd Terminal Mode Commands, Up: RIPng
-
-6.4 ripngd Filtering Commands
-=============================
-
- -- Command: distribute-list ACCESS_LIST (in|out) IFNAME
- You can apply an access-list to the interface using the
- `distribute-list' command. ACCESS_LIST is an access-list name.
- DIRECT is `in' or `out'. If DIRECT is `in', the access-list is
- applied only to incoming packets.
-
- distribute-list local-only out sit1
-
-
-File: quagga.info, Node: OSPFv2, Next: OSPFv3, Prev: RIPng, Up: Top
-
-7 OSPFv2
-********
-
-OSPF (Open Shortest Path First) version 2 is a routing protocol which
-is described in `RFC2328, OSPF Version 2'. OSPF is an IGP (Interior
-Gateway Protocol).. Compared with RIP, OSPF can provide scalable
-network support and faster convergence times. OSPF is widely used in
-large networks such as ISP (Internet Service Provider) backbone and
-enterprise networks.
-
-* Menu:
-
-* Configuring ospfd::
-* OSPF router::
-* OSPF area::
-* OSPF interface::
-* Redistribute routes to OSPF::
-* Showing OSPF information::
-* Debugging OSPF::
-* OSPF Configuration Examples::
-
-
-File: quagga.info, Node: Configuring ospfd, Next: OSPF router, Up: OSPFv2
-
-7.1 Configuring ospfd
-=====================
-
-There are no `ospfd' specific options. Common options can be specified
-(*note Common Invocation Options::) to `ospfd'. `ospfd' needs to
-acquire interface information from `zebra' in order to function.
-Therefore `zebra' must be running before invoking `ospfd'. Also, if
-`zebra' is restarted then `ospfd' must be too.
-
- Like other daemons, `ospfd' configuration is done in OSPF specific
-configuration file `ospfd.conf'.
-
-
-File: quagga.info, Node: OSPF router, Next: OSPF area, Prev: Configuring ospfd, Up: OSPFv2
-
-7.2 OSPF router
-===============
-
-To start OSPF process you have to specify the OSPF router. As of this
-writing, `ospfd' does not support multiple OSPF processes.
-
- -- Command: router ospf
- -- Command: no router ospf
- Enable or disable the OSPF process. `ospfd' does not yet support
- multiple OSPF processes. So you can not specify an OSPF process
- number.
-
- -- OSPF Command: ospf router-id A.B.C.D
- -- OSPF Command: no ospf router-id
- This sets the router-ID of the OSPF process. The router-ID may be
- an IP address of the router, but need not be - it can be any
- arbitrary 32bit number. However it MUST be unique within the
- entire OSPF domain to the OSPF speaker - bad things will happen if
- multiple OSPF speakers are configured with the same router-ID! If
- one is not specified then `ospfd' will obtain a router-ID
- automatically from `zebra'.
-
- -- OSPF Command: ospf abr-type TYPE
- -- OSPF Command: no ospf abr-type TYPE
- TYPE can be cisco|ibm|shortcut|standard.
-
- More information regarding the behaviour controlled by this
- command can be found in `RFC 3509, Alternative Implementations of
- OSPF Area Border Routers', and
- `draft-ietf-ospf-shortcut-abr-02.txt'.
-
- Quote: "Though the definition of the ABR (Area Border Router) in
- the OSPF specification does not require a router with multiple
- attached areas to have a backbone connection, it is actually
- necessary to provide successful routing to the inter-area and
- external destinations. If this requirement is not met, all traffic
- destined for the areas not connected to such an ABR or out of the
- OSPF domain, is dropped. This document describes alternative ABR
- behaviors implemented in Cisco and IBM routers."
-
- The default ABR type is 'Cisco', allowing an ABR to consider
- summaries from non-backbone areas if, and only if, it has lost its
- link(s) to the backbone area.
-
- -- OSPF Command: ospf rfc1583compatibility
- -- OSPF Command: no ospf rfc1583compatibility
- This `RFC2328', the sucessor to `RFC1583', suggests according to
- section G.2 (changes) in section 16.4 a change to the path
- preference algorithm that prevents possible routing loops that were
- possible in the old version of OSPFv2. More specifically it demands
- that inter-area paths and intra-area path are now of equal
- preference but still both preferred to external paths.
-
- This command should NOT be set normally.
-
- -- OSPF Command: passive interface INTERFACE
- -- OSPF Command: no passive interface INTERFACE
- Do not speak OSPF interface on the given interface, but do
- advertise the interface as a stub link in the router-LSA (Link
- State Advertisement) for this router. This allows one to advertise
- addresses on such connected interfaces without having to originate
- AS-External/Type-5 LSAs (which have global flooding scope) - as
- would occur if connected addresses were redistributed into OSPF,
- *Note Redistribute routes to OSPF::.
-
-
- -- OSPF Command: timers throttle spf DELAY INITIAL-HOLDTIME
-MAX-HOLDTIME
- -- OSPF Command: no timers throttle spf
- This command sets the initial DELAY, the INITIAL-HOLDTIME and the
- MAXIMUM-HOLDTIME between when SPF is calculated and the event
- which triggered the calculation. The times are specified in
- milliseconds and must be in the range of 0 to 600000 milliseconds.
-
- The DELAY specifies the minimum amount of time to delay SPF
- calculation (hence it affects how long SPF calculation is delayed
- after an event which occurs outside of the holdtime of any
- previous SPF calculation, and also serves as a minimum holdtime).
-
- Consecutive SPF calculations will always be seperated by at least
- 'hold-time' milliseconds. The hold-time is adaptive and initially
- is set to the INITIAL-HOLDTIME configured with the above command.
- Events which occur within the holdtime of the previous SPF
- calculation will cause the holdtime to be increased by
- INITIAL-HOLDTIME, bounded by the MAXIMUM-HOLDTIME configured with
- this command. If the adaptive hold-time elapses without any
- SPF-triggering event occuring then the current holdtime is reset
- to the INITIAL-HOLDTIME. The current holdtime can be viewed with
- *Note show ip ospf::, where it is expressed as a multiplier of the
- INITIAL-HOLDTIME.
-
- router ospf
- timers throttle spf 200 400 10000
-
- In this example, the DELAY is set to 200ms, the INITIAL HOLDTIME
- is set to 400ms and the MAXIMUM HOLDTIME to 10s. Hence there will
- always be at least 200ms between an event which requires SPF
- calculation and the actual SPF calculation. Further consecutive SPF
- calculations will always be seperated by between 400ms to 10s, the
- hold-time increasing by 400ms each time an SPF-triggering event
- occurs within the hold-time of the previous SPF calculation.
-
- This command supercedes the `timers spf' command in previous Quagga
- releases.
-
- -- OSPF Command: max-metric router-lsa [on-startup|on-shutdown]
-<5-86400>
- -- OSPF Command: max-metric router-lsa administrative
- -- OSPF Command: no max-metric router-lsa
-[on-startup|on-shutdown|administrative]
- This enables `RFC3137, OSPF Stub Router Advertisement' support,
- where the OSPF process describes its transit links in its
- router-LSA as having infinite distance so that other routers will
- avoid calculating transit paths through the router while still
- being able to reach networks through the router.
-
- This support may be enabled administratively (and indefinitely) or
- conditionally. Conditional enabling of max-metric router-lsas can
- be for a period of seconds after startup and/or for a period of
- seconds prior to shutdown.
-
- Enabling this for a period after startup allows OSPF to converge
- fully first without affecting any existing routes used by other
- routers, while still allowing any connected stub links and/or
- redistributed routes to be reachable. Enabling this for a period
- of time in advance of shutdown allows the router to gracefully
- excuse itself from the OSPF domain.
-
- Enabling this feature administratively allows for administrative
- intervention for whatever reason, for an indefinite period of time.
- Note that if the configuration is written to file, this
- administrative form of the stub-router command will also be
- written to file. If `ospfd' is restarted later, the command will
- then take effect until manually deconfigured.
-
- Configured state of this feature as well as current status, such
- as the number of second remaining till on-startup or on-shutdown
- ends, can be viewed with the *Note show ip ospf:: command.
-
- -- OSPF Command: auto-cost reference-bandwidth <1-4294967>
- -- OSPF Command: no auto-cost reference-bandwidth
- This sets the reference bandwidth for cost calculations, where this
- bandwidth is considered equivalent to an OSPF cost of 1, specified
- in Mbits/s. The default is 100Mbit/s (i.e. a link of bandwidth
- 100Mbit/s or higher will have a cost of 1. Cost of lower bandwidth
- links will be scaled with reference to this cost).
-
- This configuration setting MUST be consistent across all routers
- within the OSPF domain.
-
- -- OSPF Command: network A.B.C.D/M area A.B.C.D
- -- OSPF Command: network A.B.C.D/M area <0-4294967295>
- -- OSPF Command: no network A.B.C.D/M area A.B.C.D
- -- OSPF Command: no network A.B.C.D/M area <0-4294967295>
- This command specifies the OSPF enabled interface(s). If the
- interface has an address from range 192.168.1.0/24 then the
- command below enables ospf on this interface so router can provide
- network information to the other ospf routers via this interface.
-
- router ospf
- network 192.168.1.0/24 area 0.0.0.0
-
- Prefix length in interface must be equal or bigger (ie. smaller
- network) than prefix length in network statement. For example
- statement above doesn't enable ospf on interface with address
- 192.168.1.1/23, but it does on interface with address
- 192.168.1.129/25.
-
-
-File: quagga.info, Node: OSPF area, Next: OSPF interface, Prev: OSPF router, Up: OSPFv2
-
-7.3 OSPF area
-=============
-
- -- OSPF Command: area A.B.C.D range A.B.C.D/M
- -- OSPF Command: area <0-4294967295> range A.B.C.D/M
- -- OSPF Command: no area A.B.C.D range A.B.C.D/M
- -- OSPF Command: no area <0-4294967295> range A.B.C.D/M
- Summarize intra area paths from specified area into one Type-3
- summary-LSA announced to other areas. This command can be used
- only in ABR and ONLY router-LSAs (Type-1) and network-LSAs
- (Type-2) (ie. LSAs with scope area) can be summarized. Type-5
- AS-external-LSAs can't be summarized - their scope is AS.
- Summarizing Type-7 AS-external-LSAs isn't supported yet by Quagga.
-
- router ospf
- network 192.168.1.0/24 area 0.0.0.0
- network 10.0.0.0/8 area 0.0.0.10
- area 0.0.0.10 range 10.0.0.0/8
-
- With configuration above one Type-3 Summary-LSA with routing info
- 10.0.0.0/8 is announced into backbone area if area 0.0.0.10
- contains at least one intra-area network (ie. described with
- router or network LSA) from this range.
-
- -- OSPF Command: area A.B.C.D range IPV4_PREFIX not-advertise
- -- OSPF Command: no area A.B.C.D range IPV4_PREFIX not-advertise
- Instead of summarizing intra area paths filter them - ie. intra
- area paths from this range are not advertised into other areas.
- This command makes sense in ABR only.
-
- -- OSPF Command: area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX
- -- OSPF Command: no area A.B.C.D range IPV4_PREFIX substitute
-IPV4_PREFIX
- Substitute summarized prefix with another prefix.
-
- router ospf
- network 192.168.1.0/24 area 0.0.0.0
- network 10.0.0.0/8 area 0.0.0.10
- area 0.0.0.10 range 10.0.0.0/8 substitute 11.0.0.0/8
-
- One Type-3 summary-LSA with routing info 11.0.0.0/8 is announced
- into backbone area if area 0.0.0.10 contains at least one
- intra-area network (ie. described with router-LSA or network-LSA)
- from range 10.0.0.0/8. This command makes sense in ABR only.
-
- -- OSPF Command: area A.B.C.D virtual-link A.B.C.D
- -- OSPF Command: area <0-4294967295> virtual-link A.B.C.D
- -- OSPF Command: no area A.B.C.D virtual-link A.B.C.D
- -- OSPF Command: no area <0-4294967295> virtual-link A.B.C.D
-
- -- OSPF Command: area A.B.C.D shortcut
- -- OSPF Command: area <0-4294967295> shortcut
- -- OSPF Command: no area A.B.C.D shortcut
- -- OSPF Command: no area <0-4294967295> shortcut
- Configure th area as Shortcut capable. See `RFC3509'. This requires
- that the 'abr-type' be set to 'shortcut'.
-
- -- OSPF Command: area A.B.C.D stub
- -- OSPF Command: area <0-4294967295> stub
- -- OSPF Command: no area A.B.C.D stub
- -- OSPF Command: no area <0-4294967295> stub
- Configure the area to be a stub area. That is, an area where no
- router originates routes external to OSPF and hence an area where
- all external routes are via the ABR(s). Hence, ABRs for such an
- area do not need to pass AS-External LSAs (type-5s) or
- ASBR-Summary LSAs (type-4) into the area. They need only pass
- Network-Summary (type-3) LSAs into such an area, just a default
- summary.
-
- -- OSPF Command: area A.B.C.D stub no-summary
- -- OSPF Command: area <0-4294967295> stub no-summary
- -- OSPF Command: no area A.B.C.D stub no-summary
- -- OSPF Command: no area <0-4294967295> stub no-summary
- Prevents an `ospfd' ABR from injecting inter-area summaries into
- the specified stub area.
-
- -- OSPF Command: area A.B.C.D default-cost <0-16777215>
- -- OSPF Command: no area A.B.C.D default-cost <0-16777215>
- Set the cost of default-summary LSAs announced to stubby areas.
-
- -- OSPF Command: area A.B.C.D export-list NAME
- -- OSPF Command: area <0-4294967295> export-list NAME
- -- OSPF Command: no area A.B.C.D export-list NAME
- -- OSPF Command: no area <0-4294967295> export-list NAME
- Filter Type-3 summary-LSAs announced to other areas originated
- from intra- area paths from specified area.
-
- router ospf
- network 192.168.1.0/24 area 0.0.0.0
- network 10.0.0.0/8 area 0.0.0.10
- area 0.0.0.10 export-list foo
- !
- access-list foo permit 10.10.0.0/16
- access-list foo deny any
-
- With example above any intra-area paths from area 0.0.0.10 and
- from range 10.10.0.0/16 (for example 10.10.1.0/24 and
- 10.10.2.128/30) are announced into other areas as Type-3
- summary-LSA's, but any others (for example 10.11.0.0/16 or
- 10.128.30.16/30) aren't.
-
- This command is only relevant if the router is an ABR for the
- specified area.
-
- -- OSPF Command: area A.B.C.D import-list NAME
- -- OSPF Command: area <0-4294967295> import-list NAME
- -- OSPF Command: no area A.B.C.D import-list NAME
- -- OSPF Command: no area <0-4294967295> import-list NAME
- Same as export-list, but it applies to paths announced into
- specified area as Type-3 summary-LSAs.
-
- -- OSPF Command: area A.B.C.D filter-list prefix NAME in
- -- OSPF Command: area A.B.C.D filter-list prefix NAME out
- -- OSPF Command: area <0-4294967295> filter-list prefix NAME in
- -- OSPF Command: area <0-4294967295> filter-list prefix NAME out
- -- OSPF Command: no area A.B.C.D filter-list prefix NAME in
- -- OSPF Command: no area A.B.C.D filter-list prefix NAME out
- -- OSPF Command: no area <0-4294967295> filter-list prefix NAME in
- -- OSPF Command: no area <0-4294967295> filter-list prefix NAME out
- Filtering Type-3 summary-LSAs to/from area using prefix lists.
- This command makes sense in ABR only.
-
- -- OSPF Command: area A.B.C.D authentication
- -- OSPF Command: area <0-4294967295> authentication
- -- OSPF Command: no area A.B.C.D authentication
- -- OSPF Command: no area <0-4294967295> authentication
- Specify that simple password authentication should be used for the
- given area.
-
- -- OSPF Command: area A.B.C.D authentication message-digest
- -- OSPF Command: area <0-4294967295> authentication message-digest
- Specify that OSPF packets should be authenticated with MD5 HMACs
- for the given area.
-
-
-File: quagga.info, Node: OSPF interface, Next: Redistribute routes to OSPF, Prev: OSPF area, Up: OSPFv2
-
-7.4 OSPF interface
-==================
-
- -- Interface Command: ip ospf authentication-key AUTH_KEY
- -- Interface Command: no ip ospf authentication-key
- Set OSPF authentication key to a simple password. After setting
- AUTH_KEY, all OSPF packets are authenticated. AUTH_KEY has length
- up to 8 chars.
-
- -- Interface Command: ip ospf message-digest-key KEYID md5 KEY
- -- Interface Command: no ip ospf message-digest-key
- Set OSPF authentication key to a cryptographic password. The
- cryptographic algorithm is MD5. KEYID identifies secret key used
- to create the message digest. KEY is the actual message digest
- key up to 16 chars.
-
- Note that OSPF MD5 authentication requires that time never go
- backwards (correct time is NOT important, only that it never goes
- backwards), even across resets, if ospfd is to be able to promptly
- reestabish adjacencies with its neighbours after restarts/reboots.
- The host should have system time be set at boot from an external
- source (eg battery backed clock, NTP, etc.) or else the system
- clock should be periodically saved to non-volative storage and
- restored at boot if MD5 authentication is to be expected to work
- reliably.
-
- -- Interface Command: ip ospf cost <1-65535>
- -- Interface Command: no ip ospf cost
- Set link cost for the specified interface. The cost value is set
- to router-LSA's metric field and used for SPF calculation.
-
- -- Interface Command: ip ospf dead-interval <1-65535>
- -- Interface Command: ip ospf dead-interval minimal hello-multiplier
-<2-20>
- -- Interface Command: no ip ospf dead-interval
- Set number of seconds for RouterDeadInterval timer value used for
- Wait Timer and Inactivity Timer. This value must be the same for
- all routers attached to a common network. The default value is 40
- seconds.
-
- If 'minimal' is specified instead, then the dead-interval is set
- to 1 second and one must specify a hello-multiplier. The
- hello-multiplier specifies how many Hellos to send per second,
- from 2 (every 500ms) to 20 (every 50ms). Thus one can have 1s
- convergence time for OSPF. If this form is specified, then the
- hello-interval advertised in Hello packets is set to 0 and the
- hello-interval on received Hello packets is not checked, thus the
- hello-multiplier need NOT be the same across multiple routers on a
- common link.
-
- -- Interface Command: ip ospf hello-interval <1-65535>
- -- Interface Command: no ip ospf hello-interval
- Set number of seconds for HelloInterval timer value. Setting this
- value, Hello packet will be sent every timer value seconds on the
- specified interface. This value must be the same for all routers
- attached to a common network. The default value is 10 seconds.
-
- This command has no effect if *Note ip ospf dead-interval
- minimal:: is also specified for the interface.
-
- -- Interface Command: ip ospf network
-(broadcast|non-broadcast|point-to-multipoint|point-to-point)
- -- Interface Command: no ip ospf network
- Set explicitly network type for specifed interface.
-
- -- Interface Command: ip ospf priority <0-255>
- -- Interface Command: no ip ospf priority
- Set RouterPriority integer value. Setting higher value, router
- will be more eligible to become Designated Router. Setting the
- value to 0, router is no longer eligible to Designated Router.
- The default value is 1.
-
- -- Interface Command: ip ospf retransmit-interval <1-65535>
- -- Interface Command: no ip ospf retransmit interval
- Set number of seconds for RxmtInterval timer value. This value is
- used when retransmitting Database Description and Link State
- Request packets. The default value is 5 seconds.
-
- -- Interface Command: ip ospf transmit-delay
- -- Interface Command: no ip ospf transmit-delay
- Set number of seconds for InfTransDelay value. LSAs' age should be
- incremented by this value when transmitting. The default value is
- 1 seconds.
-
-
-File: quagga.info, Node: Redistribute routes to OSPF, Next: Showing OSPF information, Prev: OSPF interface, Up: OSPFv2
-
-7.5 Redistribute routes to OSPF
-===============================
-
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp)
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp)
-ROUTE-MAP
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp)
-metric-type (1|2)
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp)
-metric-type (1|2) route-map WORD
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp) metric
-<0-16777214>
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp) metric
-<0-16777214> route-map WORD
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp)
-metric-type (1|2) metric <0-16777214>
- -- OSPF Command: redistribute (kernel|connected|static|rip|bgp)
-metric-type (1|2) metric <0-16777214> route-map WORD
- -- OSPF Command: no redistribute (kernel|connected|static|rip|bgp)
- Redistribute routes of the specified protocol or kind into OSPF,
- with the metric type and metric set if specified, filtering the
- routes using the given route-map if specified.
-
- -- OSPF Command: default-information originate
- -- OSPF Command: default-information originate metric <0-16777214>
- -- OSPF Command: default-information originate metric <0-16777214>
-metric-type (1|2)
- -- OSPF Command: default-information originate metric <0-16777214>
-metric-type (1|2) route-map WORD
- -- OSPF Command: default-information originate always
- -- OSPF Command: default-information originate always metric
-<0-16777214>
- -- OSPF Command: default-information originate always metric
-<0-16777214> metric-type (1|2)
- -- OSPF Command: default-information originate always metric
-<0-16777214> metric-type (1|2) route-map WORD
- -- OSPF Command: no default-information originate
- Originate an AS-External (type-5) LSA describing a default route
- into all external-routing capable areas, of the specified metric
- and metric type. If the 'always' keyword is given then the default
- is always advertised, even when there is no default present in the
- routing table.
-
- -- OSPF Command: distribute-list NAME out
-(kernel|connected|static|rip|ospf
- -- OSPF Command: no distribute-list NAME out
-(kernel|connected|static|rip|ospf
-
- -- OSPF Command: default-metric <0-16777214>
- -- OSPF Command: no default-metric
-
- -- OSPF Command: distance <1-255>
- -- OSPF Command: no distance <1-255>
-
- -- OSPF Command: distance ospf (intra-area|inter-area|external)
- <1-255>
- -- OSPF Command: no distance ospf
-
- -- Command: router zebra
- -- Command: no router zebra
-
-
-File: quagga.info, Node: Showing OSPF information, Next: Debugging OSPF, Prev: Redistribute routes to OSPF, Up: OSPFv2
-
-7.6 Showing OSPF information
-============================
-
- -- Command: show ip ospf
- Show information on a variety of general OSPF and area state and
- configuration information.
-
- -- Command: show ip ospf interface [INTERFACE]
- Show state and configuration of OSPF the specified interface, or
- all interfaces if no interface is given.
-
- -- Command: show ip ospf neighbor
- -- Command: show ip ospf neighbor INTERFACE
- -- Command: show ip ospf neighbor detail
- -- Command: show ip ospf neighbor INTERFACE detail
-
- -- Command: show ip ospf database
-
- -- Command: show ip ospf database
-(asbr-summary|external|network|router|summary)
- -- Command: show ip ospf database
-(asbr-summary|external|network|router|summary) LINK-STATE-ID
- -- Command: show ip ospf database
-(asbr-summary|external|network|router|summary) LINK-STATE-ID adv-router
-ADV-ROUTER
- -- Command: show ip ospf database
-(asbr-summary|external|network|router|summary) adv-router ADV-ROUTER
- -- Command: show ip ospf database
-(asbr-summary|external|network|router|summary) LINK-STATE-ID
-self-originate
- -- Command: show ip ospf database
-(asbr-summary|external|network|router|summary) self-originate
-
- -- Command: show ip ospf database max-age
-
- -- Command: show ip ospf database self-originate
-
- -- Command: show ip ospf route
- Show the OSPF routing table, as determined by the most recent SPF
- calculation.
-
-
-File: quagga.info, Node: Debugging OSPF, Next: OSPF Configuration Examples, Prev: Showing OSPF information, Up: OSPFv2
-
-7.7 Debugging OSPF
-==================
-
- -- Command: debug ospf packet
-(hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]
- -- Command: no debug ospf packet
-(hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]
-
- -- Command: debug ospf ism
- -- Command: debug ospf ism (status|events|timers)
- -- Command: no debug ospf ism
- -- Command: no debug ospf ism (status|events|timers)
-
- -- Command: debug ospf nsm
- -- Command: debug ospf nsm (status|events|timers)
- -- Command: no debug ospf nsm
- -- Command: no debug ospf nsm (status|events|timers)
-
- -- Command: debug ospf lsa
- -- Command: debug ospf lsa (generate|flooding|refresh)
- -- Command: no debug ospf lsa
- -- Command: no debug ospf lsa (generate|flooding|refresh)
-
- -- Command: debug ospf zebra
- -- Command: debug ospf zebra (interface|redistribute)
- -- Command: no debug ospf zebra
- -- Command: no debug ospf zebra (interface|redistribute)
-
- -- Command: show debugging ospf
-
-
-File: quagga.info, Node: OSPF Configuration Examples, Prev: Debugging OSPF, Up: OSPFv2
-
-7.8 OSPF Configuration Examples
-===============================
-
-A simple example, with MD5 authentication enabled:
-
- !
- interface bge0
- ip ospf authentication message-digest
- ip ospf message-digest-key 1 md5 ABCDEFGHIJK
- !
- router ospf
- network 192.168.0.0/16 area 0.0.0.1
- area 0.0.0.1 authentication message-digest
-
- An ABR router, with MD5 authentication and performing summarisation
-of networks between the areas:
-
- !
- password ABCDEF
- log file /var/log/quagga/ospfd.log
- service advanced-vty
- !
- interface eth0
- ip ospf authentication message-digest
- ip ospf message-digest-key 1 md5 ABCDEFGHIJK
- !
- interface ppp0
- !
- interface br0
- ip ospf authentication message-digest
- ip ospf message-digest-key 2 md5 XYZ12345
- !
- router ospf
- ospf router-id 192.168.0.1
- redistribute connected
- passive interface ppp0
- network 192.168.0.0/24 area 0.0.0.0
- network 10.0.0.0/16 area 0.0.0.0
- network 192.168.1.0/24 area 0.0.0.1
- area 0.0.0.0 authentication message-digest
- area 0.0.0.0 range 10.0.0.0/16
- area 0.0.0.0 range 192.168.0.0/24
- area 0.0.0.1 authentication message-digest
- area 0.0.0.1 range 10.2.0.0/16
- !
-
-
-File: quagga.info, Node: OSPFv3, Next: BGP, Prev: OSPFv2, Up: Top
-
-8 OSPFv3
-********
-
-`ospf6d' is a daemon support OSPF version 3 for IPv6 network. OSPF for
-IPv6 is described in RFC2740.
-
-* Menu:
-
-* OSPF6 router::
-* OSPF6 area::
-* OSPF6 interface::
-* Redistribute routes to OSPF6::
-* Showing OSPF6 information::
-* OSPF6 Configuration Examples::
-
-
-File: quagga.info, Node: OSPF6 router, Next: OSPF6 area, Up: OSPFv3
-
-8.1 OSPF6 router
-================
-
- -- Command: router ospf6
-
- -- OSPF6 Command: router-id A.B.C.D
- Set router's Router-ID.
-
- -- OSPF6 Command: interface IFNAME area AREA
- Bind interface to specified area, and start sending OSPF packets.
- AREA can be specified as 0.
-
-
-File: quagga.info, Node: OSPF6 area, Next: OSPF6 interface, Prev: OSPF6 router, Up: OSPFv3
-
-8.2 OSPF6 area
-==============
-
-Area support for OSPFv3 is not yet implemented.
-
-
-File: quagga.info, Node: OSPF6 interface, Next: Redistribute routes to OSPF6, Prev: OSPF6 area, Up: OSPFv3
-
-8.3 OSPF6 interface
-===================
-
- -- Interface Command: ipv6 ospf6 cost COST
- Sets interface's output cost. Default value is 1.
-
- -- Interface Command: ipv6 ospf6 hello-interval HELLOINTERVAL
- Sets interface's Hello Interval. Default 40
-
- -- Interface Command: ipv6 ospf6 dead-interval DEADINTERVAL
- Sets interface's Router Dead Interval. Default value is 40.
-
- -- Interface Command: ipv6 ospf6 retransmit-interval
- RETRANSMITINTERVAL
- Sets interface's Rxmt Interval. Default value is 5.
-
- -- Interface Command: ipv6 ospf6 priority PRIORITY
- Sets interface's Router Priority. Default value is 1.
-
- -- Interface Command: ipv6 ospf6 transmit-delay TRANSMITDELAY
- Sets interface's Inf-Trans-Delay. Default value is 1.
-
-
-File: quagga.info, Node: Redistribute routes to OSPF6, Next: Showing OSPF6 information, Prev: OSPF6 interface, Up: OSPFv3
-
-8.4 Redistribute routes to OSPF6
-================================
-
- -- OSPF6 Command: redistribute static
- -- OSPF6 Command: redistribute connected
- -- OSPF6 Command: redistribute ripng
-
-
-File: quagga.info, Node: Showing OSPF6 information, Next: OSPF6 Configuration Examples, Prev: Redistribute routes to OSPF6, Up: OSPFv3
-
-8.5 Showing OSPF6 information
-=============================
-
- -- Command: show ipv6 ospf6 [INSTANCE_ID]
- INSTANCE_ID is an optional OSPF instance ID. To see router ID and
- OSPF instance ID, simply type "show ipv6 ospf6 <cr>".
-
- -- Command: show ipv6 ospf6 database
- This command shows LSA database summary. You can specify the type
- of LSA.
-
- -- Command: show ipv6 ospf6 interface
- To see OSPF interface configuration like costs.
-
- -- Command: show ipv6 ospf6 neighbor
- Shows state and chosen (Backup) DR of neighbor.
-
- -- Command: show ipv6 ospf6 request-list A.B.C.D
- Shows requestlist of neighbor.
-
- -- Command: show ipv6 route ospf6
- This command shows internal routing table.
-
-
-File: quagga.info, Node: OSPF6 Configuration Examples, Prev: Showing OSPF6 information, Up: OSPFv3
-
-8.6 OSPF6 Configuration Examples
-================================
-
-Example of ospf6d configured on one interface and area:
-
- interface eth0
- ipv6 ospf6 instance-id 0
- !
- router ospf6
- router-id 212.17.55.53
- area 0.0.0.0 range 2001:770:105:2::/64
- interface eth0 area 0.0.0.0
- !
-
-
-File: quagga.info, Node: BGP, Next: Configuring Quagga as a Route Server, Prev: OSPFv3, Up: Top
-
-9 BGP
-*****
-
-BGP stands for a Border Gateway Protocol. The lastest BGP version is
-4. It is referred as BGP-4. BGP-4 is one of the Exterior Gateway
-Protocols and de-fact standard of Inter Domain routing protocol. BGP-4
-is described in `RFC1771, A Border Gateway Protocol 4 (BGP-4)'.
-
- Many extensions have been added to `RFC1771'. `RFC2858,
-Multiprotocol Extensions for BGP-4' provides multiprotocol support to
-BGP-4.
-
-* Menu:
-
-* Starting BGP::
-* BGP router::
-* BGP network::
-* BGP Peer::
-* BGP Peer Group::
-* BGP Address Family::
-* Autonomous System::
-* BGP Communities Attribute::
-* BGP Extended Communities Attribute::
-* Displaying BGP routes::
-* Capability Negotiation::
-* Route Reflector::
-* Route Server::
-* How to set up a 6-Bone connection::
-* Dump BGP packets and table::
-* BGP Configuration Examples::
-
-
-File: quagga.info, Node: Starting BGP, Next: BGP router, Up: BGP
-
-9.1 Starting BGP
-================
-
-Default configuration file of `bgpd' is `bgpd.conf'. `bgpd' searches
-the current directory first then /etc/quagga/bgpd.conf. All of bgpd's
-command must be configured in `bgpd.conf'.
-
- `bgpd' specific invocation options are described below. Common
-options may also be specified (*note Common Invocation Options::).
-
-`-p PORT'
-`--bgp_port=PORT'
- Set the bgp protocol's port number.
-
-`-r'
-`--retain'
- When program terminates, retain BGP routes added by zebra.
-
-
-File: quagga.info, Node: BGP router, Next: BGP network, Prev: Starting BGP, Up: BGP
-
-9.2 BGP router
-==============
-
-First of all you must configure BGP router with `router bgp' command.
-To configure BGP router, you need AS number. AS number is an
-identification of autonomous system. BGP protocol uses the AS number
-for detecting whether the BGP connection is internal one or external
-one.
-
- -- Command: router bgp ASN
- Enable a BGP protocol process with the specified ASN. After this
- statement you can input any `BGP Commands'. You can not create
- different BGP process under different ASN without specifying
- `multiple-instance' (*note Multiple instance::).
-
- -- Command: no router bgp ASN
- Destroy a BGP protocol process with the specified ASN.
-
- -- BGP: bgp router-id A.B.C.D
- This command specifies the router-ID. If `bgpd' connects to
- `zebra' it gets interface and address information. In that case
- default router ID value is selected as the largest IP Address of
- the interfaces. When `router zebra' is not enabled `bgpd' can't
- get interface information so `router-id' is set to 0.0.0.0. So
- please set router-id by hand.
-
-* Menu:
-
-* BGP distance::
-* BGP decision process::
-
-
-File: quagga.info, Node: BGP distance, Next: BGP decision process, Up: BGP router
-
-9.2.1 BGP distance
-------------------
-
- -- BGP: distance bgp <1-255> <1-255> <1-255>
- This command change distance value of BGP. Each argument is
- distance value for external routes, internal routes and local
- routes.
-
- -- BGP: distance <1-255> A.B.C.D/M
- -- BGP: distance <1-255> A.B.C.D/M WORD
- This command set distance value to
-
-
-File: quagga.info, Node: BGP decision process, Prev: BGP distance, Up: BGP router
-
-9.2.2 BGP decision process
---------------------------
-
-1. Weight check
-
-2. Local preference check.
-
-3. Local route check.
-
-4. AS path length check.
-
-5. Origin check.
-
-6. MED check.
-
- -- BGP: bgp bestpath as-path confed
- This command specifies that the length of confederation path sets
- and sequences should should be taken into account during the BGP
- best path decision process.
-
-
-File: quagga.info, Node: BGP network, Next: BGP Peer, Prev: BGP router, Up: BGP
-
-9.3 BGP network
-===============
-
-* Menu:
-
-* BGP route::
-* Route Aggregation::
-* Redistribute to BGP::
-
-
-File: quagga.info, Node: BGP route, Next: Route Aggregation, Up: BGP network
-
-9.3.1 BGP route
----------------
-
- -- BGP: network A.B.C.D/M
- This command adds the announcement network.
- router bgp 1
- network 10.0.0.0/8
- This configuration example says that network 10.0.0.0/8 will
- be announced to all neighbors. Some vendors' routers don't
- advertise routes if they aren't present in their IGP routing
- tables; `bgp' doesn't care about IGP routes when announcing its
- routes.
-
- -- BGP: no network A.B.C.D/M
-
-
-File: quagga.info, Node: Route Aggregation, Next: Redistribute to BGP, Prev: BGP route, Up: BGP network
-
-9.3.2 Route Aggregation
------------------------
-
- -- BGP: aggregate-address A.B.C.D/M
- This command specifies an aggregate address.
-
- -- BGP: aggregate-address A.B.C.D/M as-set
- This command specifies an aggregate address. Resulting routes
- inlucde AS set.
-
- -- BGP: aggregate-address A.B.C.D/M summary-only
- This command specifies an aggregate address. Aggreated routes will
- not be announce.
-
- -- BGP: no aggregate-address A.B.C.D/M
-
-
-File: quagga.info, Node: Redistribute to BGP, Prev: Route Aggregation, Up: BGP network
-
-9.3.3 Redistribute to BGP
--------------------------
-
- -- BGP: redistribute kernel
- Redistribute kernel route to BGP process.
-
- -- BGP: redistribute static
- Redistribute static route to BGP process.
-
- -- BGP: redistribute connected
- Redistribute connected route to BGP process.
-
- -- BGP: redistribute rip
- Redistribute RIP route to BGP process.
-
- -- BGP: redistribute ospf
- Redistribute OSPF route to BGP process.
-
-
-File: quagga.info, Node: BGP Peer, Next: BGP Peer Group, Prev: BGP network, Up: BGP
-
-9.4 BGP Peer
-============
-
-* Menu:
-
-* Defining Peer::
-* BGP Peer commands::
-* Peer filtering::
-
-
-File: quagga.info, Node: Defining Peer, Next: BGP Peer commands, Up: BGP Peer
-
-9.4.1 Defining Peer
--------------------
-
- -- BGP: neighbor PEER remote-as ASN
- Creates a new neighbor whose remote-as is ASN. PEER can be an
- IPv4 address or an IPv6 address.
- router bgp 1
- neighbor 10.0.0.1 remote-as 2
- In this case my router, in AS-1, is trying to peer with AS-2
- at 10.0.0.1.
-
- This command must be the first command used when configuring a
- neighbor. If the remote-as is not specified, `bgpd' will complain
- like this:
- can't find neighbor 10.0.0.1
-
-
-File: quagga.info, Node: BGP Peer commands, Next: Peer filtering, Prev: Defining Peer, Up: BGP Peer
-
-9.4.2 BGP Peer commands
------------------------
-
-In a `router bgp' clause there are neighbor specific configurations
-required.
-
- -- BGP: neighbor PEER shutdown
- -- BGP: no neighbor PEER shutdown
- Shutdown the peer. We can delete the neighbor's configuration by
- `no neighbor PEER remote-as AS-NUMBER' but all configuration of
- the neighbor will be deleted. When you want to preserve the
- configuration, but want to drop the BGP peer, use this syntax.
-
- -- BGP: neighbor PEER ebgp-multihop
- -- BGP: no neighbor PEER ebgp-multihop
-
- -- BGP: neighbor PEER description ...
- -- BGP: no neighbor PEER description ...
- Set description of the peer.
-
- -- BGP: neighbor PEER version VERSION
- Set up the neighbor's BGP version. VERSION can be 4, 4+ or 4-.
- BGP version 4 is the default value used for BGP peering. BGP
- version 4+ means that the neighbor supports Multiprotocol
- Extensions for BGP-4. BGP version 4- is similar but the neighbor
- speaks the old Internet-Draft revision 00's Multiprotocol
- Extensions for BGP-4. Some routing software is still using this
- version.
-
- -- BGP: neighbor PEER interface IFNAME
- -- BGP: no neighbor PEER interface IFNAME
- When you connect to a BGP peer over an IPv6 link-local address,
- you have to specify the IFNAME of the interface used for the
- connection.
-
- -- BGP: neighbor PEER next-hop-self
- -- BGP: no neighbor PEER next-hop-self
- This command specifies an announced route's nexthop as being
- equivalent to the address of the bgp router.
-
- -- BGP: neighbor PEER update-source
- -- BGP: no neighbor PEER update-source
-
- -- BGP: neighbor PEER default-originate
- -- BGP: no neighbor PEER default-originate
- `bgpd''s default is to not announce the default route (0.0.0.0/0)
- even it is in routing table. When you want to announce default
- routes to the peer, use this command.
-
- -- BGP: neighbor PEER port PORT
- -- BGP: neighbor PEER port PORT
-
- -- BGP: neighbor PEER send-community
- -- BGP: neighbor PEER send-community
-
- -- BGP: neighbor PEER weight WEIGHT
- -- BGP: no neighbor PEER weight WEIGHT
- This command specifies a default WEIGHT value for the neighbor's
- routes.
-
- -- BGP: neighbor PEER maximum-prefix NUMBER
- -- BGP: no neighbor PEER maximum-prefix NUMBER
-
-
-File: quagga.info, Node: Peer filtering, Prev: BGP Peer commands, Up: BGP Peer
-
-9.4.3 Peer filtering
---------------------
-
- -- BGP: neighbor PEER distribute-list NAME [in|out]
- This command specifies a distribute-list for the peer. DIRECT is
- `in' or `out'.
-
- -- BGP command: neighbor PEER prefix-list NAME [in|out]
-
- -- BGP command: neighbor PEER filter-list NAME [in|out]
-
- -- BGP: neighbor PEER route-map NAME [in|out]
- Apply a route-map on the neighbor. DIRECT must be `in' or `out'.
-
-
-File: quagga.info, Node: BGP Peer Group, Next: BGP Address Family, Prev: BGP Peer, Up: BGP
-
-9.5 BGP Peer Group
-==================
-
- -- BGP: neighbor WORD peer-group
- This command defines a new peer group.
-
- -- BGP: neighbor PEER peer-group WORD
- This command bind specific peer to peer group WORD.
-
-
-File: quagga.info, Node: BGP Address Family, Next: Autonomous System, Prev: BGP Peer Group, Up: BGP
-
-9.6 BGP Address Family
-======================
-
-
-File: quagga.info, Node: Autonomous System, Next: BGP Communities Attribute, Prev: BGP Address Family, Up: BGP
-
-9.7 Autonomous System
-=====================
-
-The AS (Autonomous System) number is one of the essential element of
-BGP. BGP is a distance vector routing protocol, and the AS-Path
-framework provides distance vector metric and loop detection to BGP.
-`RFC1930, Guidelines for creation, selection, and registration of an
-Autonomous System (AS)' provides some background on the concepts of an
-AS.
-
- The AS number is a two octet value, ranging in value from 1 to 65535.
-The AS numbers 64512 through 65535 are defined as private AS numbers.
-Private AS numbers must not to be advertised in the global Internet.
-
-* Menu:
-
-* AS Path Regular Expression::
-* Display BGP Routes by AS Path::
-* AS Path Access List::
-* Using AS Path in Route Map::
-* Private AS Numbers::
-
-
-File: quagga.info, Node: AS Path Regular Expression, Next: Display BGP Routes by AS Path, Up: Autonomous System
-
-9.7.1 AS Path Regular Expression
---------------------------------
-
-AS path regular expression can be used for displaying BGP routes and AS
-path access list. AS path regular expression is based on `POSIX
-1003.2' regular expressions. Following description is just a subset of
-`POSIX' regular expression. User can use full `POSIX' regular
-expression. Adding to that special character '_' is added for AS path
-regular expression.
-
-`.'
- Matches any single character.
-
-`*'
- Matches 0 or more occurrences of pattern.
-
-`+'
- Matches 1 or more occurrences of pattern.
-
-`?'
- Match 0 or 1 occurrences of pattern.
-
-`^'
- Matches the beginning of the line.
-
-`$'
- Matches the end of the line.
-
-`_'
- Character `_' has special meanings in AS path regular expression.
- It matches to space and comma , and AS set delimiter { and } and AS
- confederation delimiter `(' and `)'. And it also matches to the
- beginning of the line and the end of the line. So `_' can be used
- for AS value boundaries match. `show ip bgp regexp _7675_'
- matches to all of BGP routes which as AS number include 7675.
-
-
-File: quagga.info, Node: Display BGP Routes by AS Path, Next: AS Path Access List, Prev: AS Path Regular Expression, Up: Autonomous System
-
-9.7.2 Display BGP Routes by AS Path
------------------------------------
-
-To show BGP routes which has specific AS path information `show ip bgp'
-command can be used.
-
- -- Command: show ip bgp regexp LINE
- This commands display BGP routes that matches AS path regular
- expression LINE.
-
-
-File: quagga.info, Node: AS Path Access List, Next: Using AS Path in Route Map, Prev: Display BGP Routes by AS Path, Up: Autonomous System
-
-9.7.3 AS Path Access List
--------------------------
-
-AS path access list is user defined AS path.
-
- -- Command: ip as-path access-list WORD {permit|deny} LINE
- This command defines a new AS path access list.
-
- -- Command: no ip as-path access-list WORD
- -- Command: no ip as-path access-list WORD {permit|deny} LINE
-
-
-File: quagga.info, Node: Using AS Path in Route Map, Next: Private AS Numbers, Prev: AS Path Access List, Up: Autonomous System
-
-9.7.4 Using AS Path in Route Map
---------------------------------
-
- -- Route Map: match as-path WORD
-
- -- Route Map: set as-path prepend AS-PATH
-
-
-File: quagga.info, Node: Private AS Numbers, Prev: Using AS Path in Route Map, Up: Autonomous System
-
-9.7.5 Private AS Numbers
-------------------------
-
-
-File: quagga.info, Node: BGP Communities Attribute, Next: BGP Extended Communities Attribute, Prev: Autonomous System, Up: BGP
-
-9.8 BGP Communities Attribute
-=============================
-
-BGP communities attribute is widely used for implementing policy
-routing. Network operators can manipulate BGP communities attribute
-based on their network policy. BGP communities attribute is defined in
-`RFC1997, BGP Communities Attribute' and `RFC1998, An Application of
-the BGP Community Attribute in Multi-home Routing'. It is an optional
-transitive attribute, therefore local policy can travel through
-different autonomous system.
-
- Communities attribute is a set of communities values. Each
-communities value is 4 octet long. The following format is used to
-define communities value.
-
-`AS:VAL'
- This format represents 4 octet communities value. `AS' is high
- order 2 octet in digit format. `VAL' is low order 2 octet in
- digit format. This format is useful to define AS oriented policy
- value. For example, `7675:80' can be used when AS 7675 wants to
- pass local policy value 80 to neighboring peer.
-
-`internet'
- `internet' represents well-known communities value 0.
-
-`no-export'
- `no-export' represents well-known communities value `NO_EXPORT'
- (0xFFFFFF01). All routes carry this value must not be advertised
- to outside a BGP confederation boundary. If neighboring BGP peer
- is part of BGP confederation, the peer is considered as inside a
- BGP confederation boundary, so the route will be announced to the
- peer.
-
-`no-advertise'
- `no-advertise' represents well-known communities value
- `NO_ADVERTISE'
- (0xFFFFFF02). All routes carry this value must not be advertise
- to other BGP peers.
-
-`local-AS'
- `local-AS' represents well-known communities value
- `NO_EXPORT_SUBCONFED' (0xFFFFFF03). All routes carry this value
- must not be advertised to external BGP peers. Even if the
- neighboring router is part of confederation, it is considered as
- external BGP peer, so the route will not be announced to the peer.
-
- When BGP communities attribute is received, duplicated communities
-value in the communities attribute is ignored and each communities
-values are sorted in numerical order.
-
-* Menu:
-
-* BGP Community Lists::
-* Numbered BGP Community Lists::
-* BGP Community in Route Map::
-* Display BGP Routes by Community::
-* Using BGP Communities Attribute::
-
-
-File: quagga.info, Node: BGP Community Lists, Next: Numbered BGP Community Lists, Up: BGP Communities Attribute
-
-9.8.1 BGP Community Lists
--------------------------
-
-BGP community list is a user defined BGP communites attribute list.
-BGP community list can be used for matching or manipulating BGP
-communities attribute in updates.
-
- There are two types of community list. One is standard community
-list and another is expanded community list. Standard community list
-defines communities attribute. Expanded community list defines
-communities attribute string with regular expression. Standard
-community list is compiled into binary format when user define it.
-Standard community list will be directly compared to BGP communities
-attribute in BGP updates. Therefore the comparison is faster than
-expanded community list.
-
- -- Command: ip community-list standard NAME {permit|deny} COMMUNITY
- This command defines a new standard community list. COMMUNITY is
- communities value. The COMMUNITY is compiled into community
- structure. We can define multiple community list under same name.
- In that case match will happen user defined order. Once the
- community list matches to communities attribute in BGP updates it
- return permit or deny by the community list definition. When
- there is no matched entry, deny will be returned. When COMMUNITY
- is empty it matches to any routes.
-
- -- Command: ip community-list expanded NAME {permit|deny} LINE
- This command defines a new expanded community list. LINE is a
- string expression of communities attribute. LINE can include
- regular expression to match communities attribute in BGP updates.
-
- -- Command: no ip community-list NAME
- -- Command: no ip community-list standard NAME
- -- Command: no ip community-list expanded NAME
- These commands delete community lists specified by NAME. All of
- community lists shares a single name space. So community lists
- can be removed simpley specifying community lists name.
-
- -- Command: show ip community-list
- -- Command: show ip community-list NAME
- This command display current community list information. When
- NAME is specified the specified community list's information is
- shown.
-
- # show ip community-list
- Named Community standard list CLIST
- permit 7675:80 7675:100 no-export
- deny internet
- Named Community expanded list EXPAND
- permit :
-
- # show ip community-list CLIST
- Named Community standard list CLIST
- permit 7675:80 7675:100 no-export
- deny internet
-
-
-File: quagga.info, Node: Numbered BGP Community Lists, Next: BGP Community in Route Map, Prev: BGP Community Lists, Up: BGP Communities Attribute
-
-9.8.2 Numbered BGP Community Lists
-----------------------------------
-
-When number is used for BGP community list name, the number has special
-meanings. Community list number in the range from 1 and 99 is standard
-community list. Community list number in the range from 100 to 199 is
-expanded community list. These community lists are called as numbered
-community lists. On the other hand normal community lists is called as
-named community lists.
-
- -- Command: ip community-list <1-99> {permit|deny} COMMUNITY
- This command defines a new community list. <1-99> is standard
- community list number. Community list name within this range
- defines standard community list. When COMMUNITY is empty it
- matches to any routes.
-
- -- Command: ip community-list <100-199> {permit|deny} COMMUNITY
- This command defines a new community list. <100-199> is expanded
- community list number. Community list name within this range
- defines expanded community list.
-
- -- Command: ip community-list NAME {permit|deny} COMMUNITY
- When community list type is not specifed, the community list type
- is automatically detected. If COMMUNITY can be compiled into
- communities attribute, the community list is defined as a standard
- community list. Otherwise it is defined as an expanded community
- list. This feature is left for backward compability. Use of this
- feature is not recommended.
-
-
-File: quagga.info, Node: BGP Community in Route Map, Next: Display BGP Routes by Community, Prev: Numbered BGP Community Lists, Up: BGP Communities Attribute
-
-9.8.3 BGP Community in Route Map
---------------------------------
-
-In Route Map (*note Route Map::), we can match or set BGP communities
-attribute. Using this feature network operator can implement their
-network policy based on BGP communities attribute.
-
- Following commands can be used in Route Map.
-
- -- Route Map: match community WORD
- -- Route Map: match community WORD exact-match
- This command perform match to BGP updates using community list
- WORD. When the one of BGP communities value match to the one of
- communities value in community list, it is match. When
- `exact-match' keyword is spcified, match happen only when BGP
- updates have completely same communities value specified in the
- community list.
-
- -- Route Map: set community none
- -- Route Map: set community COMMUNITY
- -- Route Map: set community COMMUNITY additive
- This command manipulate communities value in BGP updates. When
- `none' is specified as communities value, it removes entire
- communities attribute from BGP updates. When COMMUNITY is not
- `none', specified communities value is set to BGP updates. If BGP
- updates already has BGP communities value, the existing BGP
- communities value is replaced with specified COMMUNITY value.
- When `additive' keyword is specified, COMMUNITY is appended to the
- existing communities value.
-
- -- Route Map: set comm-list WORD delete
- This command remove communities value from BGP communities
- attribute. The WORD is community list name. When BGP route's
- communities value matches to the community list WORD, the
- communities value is removed. When all of communities value is
- removed eventually, the BGP update's communities attribute is
- completely removed.
-
-
-File: quagga.info, Node: Display BGP Routes by Community, Next: Using BGP Communities Attribute, Prev: BGP Community in Route Map, Up: BGP Communities Attribute
-
-9.8.4 Display BGP Routes by Community
--------------------------------------
-
-To show BGP routes which has specific BGP communities attribute, `show
-ip bgp' command can be used. The COMMUNITY value and community list
-can be used for `show ip bgp' command.
-
- -- Command: show ip bgp community
- -- Command: show ip bgp community COMMUNITY
- -- Command: show ip bgp community COMMUNITY exact-match
- `show ip bgp community' displays BGP routes which has communities
- attribute. When COMMUNITY is specified, BGP routes that matches
- COMMUNITY value is displayed. For this command, `internet'
- keyword can't be used for COMMUNITY value. When `exact-match' is
- specified, it display only routes that have an exact match.
-
- -- Command: show ip bgp community-list WORD
- -- Command: show ip bgp community-list WORD exact-match
- This commands display BGP routes that matches community list WORD.
- When `exact-match' is specified, display only routes that have an
- exact match.
-
-
-File: quagga.info, Node: Using BGP Communities Attribute, Prev: Display BGP Routes by Community, Up: BGP Communities Attribute
-
-9.8.5 Using BGP Communities Attribute
--------------------------------------
-
-Following configuration is the most typical usage of BGP communities
-attribute. AS 7675 provides upstream Internet connection to AS 100.
-When following configuration exists in AS 7675, AS 100 networks
-operator can set local preference in AS 7675 network by setting BGP
-communities attribute to the updates.
-
- router bgp 7675
- neighbor 192.168.0.1 remote-as 100
- neighbor 192.168.0.1 route-map RMAP in
- !
- ip community-list 70 permit 7675:70
- ip community-list 70 deny
- ip community-list 80 permit 7675:80
- ip community-list 80 deny
- ip community-list 90 permit 7675:90
- ip community-list 90 deny
- !
- route-map RMAP permit 10
- match community 70
- set local-preference 70
- !
- route-map RMAP permit 20
- match community 80
- set local-preference 80
- !
- route-map RMAP permit 30
- match community 90
- set local-preference 90
-
- Following configuration announce 10.0.0.0/8 from AS 100 to AS 7675.
-The route has communities value 7675:80 so when above configuration
-exists in AS 7675, announced route's local preference will be set to
-value 80.
-
- router bgp 100
- network 10.0.0.0/8
- neighbor 192.168.0.2 remote-as 7675
- neighbor 192.168.0.2 route-map RMAP out
- !
- ip prefix-list PLIST permit 10.0.0.0/8
- !
- route-map RMAP permit 10
- match ip address prefix-list PLIST
- set community 7675:80
-
- Following configuration is an example of BGP route filtering using
-communities attribute. This configuration only permit BGP routes which
-has BGP communities value 0:80 or 0:90. Network operator can put
-special internal communities value at BGP border router, then limit the
-BGP routes announcement into the internal network.
-
- router bgp 7675
- neighbor 192.168.0.1 remote-as 100
- neighbor 192.168.0.1 route-map RMAP in
- !
- ip community-list 1 permit 0:80 0:90
- !
- route-map RMAP permit in
- match community 1
-
- Following exmaple filter BGP routes which has communities value 1:1.
-When there is no match community-list returns deny. To avoid filtering
-all of routes, we need to define permit any at last.
-
- router bgp 7675
- neighbor 192.168.0.1 remote-as 100
- neighbor 192.168.0.1 route-map RMAP in
- !
- ip community-list standard FILTER deny 1:1
- ip community-list standard FILTER permit
- !
- route-map RMAP permit 10
- match community FILTER
-
- Communities value keyword `internet' has special meanings in
-standard community lists. In below example `internet' act as match
-any. It matches all of BGP routes even if the route does not have
-communities attribute at all. So community list `INTERNET' is same as
-above example's `FILTER'.
-
- ip community-list standard INTERNET deny 1:1
- ip community-list standard INTERNET permit internet
-
- Following configuration is an example of communities value deletion.
-With this configuration communities value 100:1 and 100:2 is removed
-from BGP updates. For communities value deletion, only `permit'
-community-list is used. `deny' community-list is ignored.
-
- router bgp 7675
- neighbor 192.168.0.1 remote-as 100
- neighbor 192.168.0.1 route-map RMAP in
- !
- ip community-list standard DEL permit 100:1 100:2
- !
- route-map RMAP permit 10
- set comm-list DEL delete
-
-
-File: quagga.info, Node: BGP Extended Communities Attribute, Next: Displaying BGP routes, Prev: BGP Communities Attribute, Up: BGP
-
-9.9 BGP Extended Communities Attribute
-======================================
-
-BGP extended communities attribute is introduced with MPLS VPN/BGP
-technology. MPLS VPN/BGP expands capability of network infrastructure
-to provide VPN functionality. At the same time it requires a new
-framework for policy routing. With BGP Extended Communities Attribute
-we can use Route Target or Site of Origin for implementing network
-policy for MPLS VPN/BGP.
-
- BGP Extended Communities Attribute is similar to BGP Communities
-Attribute. It is an optional transitive attribute. BGP Extended
-Communities Attribute can carry multiple Extended Community value.
-Each Extended Community value is eight octet length.
-
- BGP Extended Communities Attribute provides an extended range
-compared with BGP Communities Attribute. Adding to that there is a
-type field in each value to provides community space structure.
-
- There are two format to define Extended Community value. One is AS
-based format the other is IP address based format.
-
-`AS:VAL'
- This is a format to define AS based Extended Community value.
- `AS' part is 2 octets Global Administrator subfield in Extended
- Community value. `VAL' part is 4 octets Local Administrator
- subfield. `7675:100' represents AS 7675 policy value 100.
-
-`IP-Address:VAL'
- This is a format to define IP address based Extended Community
- value. `IP-Address' part is 4 octets Global Administrator
- subfield. `VAL' part is 2 octets Local Administrator subfield.
- `10.0.0.1:100' represents
-
-* Menu:
-
-* BGP Extended Community Lists::
-* BGP Extended Communities in Route Map::
-
-
-File: quagga.info, Node: BGP Extended Community Lists, Next: BGP Extended Communities in Route Map, Up: BGP Extended Communities Attribute
-
-9.9.1 BGP Extended Community Lists
-----------------------------------
-
-Expanded Community Lists is a user defined BGP Expanded Community Lists.
-
- -- Command: ip extcommunity-list standard NAME {permit|deny}
-EXTCOMMUNITY
- This command defines a new standard extcommunity-list.
- EXTCOMMUNITY is extended communities value. The EXTCOMMUNITY is
- compiled into extended community structure. We can define
- multiple extcommunity-list under same name. In that case match
- will happen user defined order. Once the extcommunity-list
- matches to extended communities attribute in BGP updates it return
- permit or deny based upon the extcommunity-list definition. When
- there is no matched entry, deny will be returned. When
- EXTCOMMUNITY is empty it matches to any routes.
-
- -- Command: ip extcommunity-list expanded NAME {permit|deny} LINE
- This command defines a new expanded extcommunity-list. LINE is a
- string expression of extended communities attribute. LINE can
- include regular expression to match extended communities attribute
- in BGP updates.
-
- -- Command: no ip extcommunity-list NAME
- -- Command: no ip extcommunity-list standard NAME
- -- Command: no ip extcommunity-list expanded NAME
- These commands delete extended community lists specified by NAME.
- All of extended community lists shares a single name space. So
- extended community lists can be removed simpley specifying the
- name.
-
- -- Command: show ip extcommunity-list
- -- Command: show ip extcommunity-list NAME
- This command display current extcommunity-list information. When
- NAME is specified the community list's information is shown.
-
- # show ip extcommunity-list
-
-
-File: quagga.info, Node: BGP Extended Communities in Route Map, Prev: BGP Extended Community Lists, Up: BGP Extended Communities Attribute
-
-9.9.2 BGP Extended Communities in Route Map
--------------------------------------------
-
- -- Route Map: match extcommunity WORD
-
- -- Route Map: set extcommunity rt EXTCOMMUNITY
- This command set Route Target value.
-
- -- Route Map: set extcommunity soo EXTCOMMUNITY
- This command set Site of Origin value.
-
-
-File: quagga.info, Node: Displaying BGP routes, Next: Capability Negotiation, Prev: BGP Extended Communities Attribute, Up: BGP
-
-9.10 Displaying BGP Routes
-==========================
-
-* Menu:
-
-* Show IP BGP::
-* More Show IP BGP::
-
-
-File: quagga.info, Node: Show IP BGP, Next: More Show IP BGP, Up: Displaying BGP routes
-
-9.10.1 Show IP BGP
-------------------
-
- -- Command: show ip bgp
- -- Command: show ip bgp A.B.C.D
- -- Command: show ip bgp X:X::X:X
- This command displays BGP routes. When no route is specified it
- display all of IPv4 BGP routes.
-
- BGP table version is 0, local router ID is 10.1.1.1
- Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
- Origin codes: i - IGP, e - EGP, ? - incomplete
-
- Network Next Hop Metric LocPrf Weight Path
- *> 1.1.1.1/32 0.0.0.0 0 32768 i
-
- Total number of prefixes 1
-
-
-File: quagga.info, Node: More Show IP BGP, Prev: Show IP BGP, Up: Displaying BGP routes
-
-9.10.2 More Show IP BGP
------------------------
-
- -- Command: show ip bgp regexp LINE
- This command display BGP routes using AS path regular expression
- (*note Display BGP Routes by AS Path::).
-
- -- Command: show ip bgp community COMMUNITY
- -- Command: show ip bgp community COMMUNITY exact-match
- This command display BGP routes using COMMUNITY (*note Display BGP
- Routes by Community::).
-
- -- Command: show ip bgp community-list WORD
- -- Command: show ip bgp community-list WORD exact-match
- This command display BGP routes using community list (*note
- Display BGP Routes by Community::).
-
- -- Command: show ip bgp summary
-
- -- Command: show ip bgp neighbor [PEER]
-
- -- Command: clear ip bgp PEER
- Clear peers which have addresses of X.X.X.X
-
- -- Command: clear ip bgp PEER soft in
- Clear peer using soft reconfiguration.
-
- -- Command: show debug
-
- -- Command: debug event
-
- -- Command: debug update
-
- -- Command: debug keepalive
-
- -- Command: no debug event
-
- -- Command: no debug update
-
- -- Command: no debug keepalive
-
-
-File: quagga.info, Node: Capability Negotiation, Next: Route Reflector, Prev: Displaying BGP routes, Up: BGP
-
-9.11 Capability Negotiation
-===========================
-
-When adding IPv6 routing information exchange feature to BGP. There
-were some proposals. IETF (Internet Engineering Task Force) IDR (Inter
-Domain Routing) WG (Working group) adopted a proposal called
-Multiprotocol Extension for BGP. The specification is described in
-`RFC2283'. The protocol does not define new protocols. It defines new
-attributes to existing BGP. When it is used exchanging IPv6 routing
-information it is called BGP-4+. When it is used for exchanging
-multicast routing information it is called MBGP.
-
- `bgpd' supports Multiprotocol Extension for BGP. So if remote peer
-supports the protocol, `bgpd' can exchange IPv6 and/or multicast
-routing information.
-
- Traditional BGP did not have the feature to detect remote peer's
-capabilities, e.g. whether it can handle prefix types other than IPv4
-unicast routes. This was a big problem using Multiprotocol Extension
-for BGP to operational network. `RFC2842, Capabilities Advertisement
-with BGP-4' adopted a feature called Capability Negotiation. `bgpd' use
-this Capability Negotiation to detect the remote peer's capabilities.
-If the peer is only configured as IPv4 unicast neighbor, `bgpd' does
-not send these Capability Negotiation packets (at least not unless
-other optional BGP features require capability negotation).
-
- By default, Quagga will bring up peering with minimal common
-capability for the both sides. For example, local router has unicast
-and multicast capabilitie and remote router has unicast capability. In
-this case, the local router will establish the connection with unicast
-only capability. When there are no common capabilities, Quagga sends
-Unsupported Capability error and then resets the connection.
-
- If you want to completely match capabilities with remote peer.
-Please use `strict-capability-match' command.
-
- -- BGP: neighbor PEER strict-capability-match
- -- BGP: no neighbor PEER strict-capability-match
- Strictly compares remote capabilities and local capabilities. If
- capabilities are different, send Unsupported Capability error then
- reset connection.
-
- You may want to disable sending Capability Negotiation OPEN message
-optional parameter to the peer when remote peer does not implement
-Capability Negotiation. Please use `dont-capability-negotiate' command
-to disable the feature.
-
- -- BGP: neighbor PEER dont-capability-negotiate
- -- BGP: no neighbor PEER dont-capability-negotiate
- Suppress sending Capability Negotiation as OPEN message optional
- parameter to the peer. This command only affects the peer is
- configured other than IPv4 unicast configuration.
-
- When remote peer does not have capability negotiation feature, remote
-peer will not send any capabilities at all. In that case, bgp
-configures the peer with configured capabilities.
-
- You may prefer locally configured capabilities more than the
-negotiated capabilities even though remote peer sends capabilities. If
-the peer is configured by `override-capability', `bgpd' ignores
-received capabilities then override negotiated capabilities with
-configured values.
-
- -- BGP: neighbor PEER override-capability
- -- BGP: no neighbor PEER override-capability
- Override the result of Capability Negotiation with local
- configuration. Ignore remote peer's capability value.
-
-
-File: quagga.info, Node: Route Reflector, Next: Route Server, Prev: Capability Negotiation, Up: BGP
-
-9.12 Route Reflector
-====================
-
- -- BGP: bgp cluster-id A.B.C.D
-
- -- BGP: neighbor PEER route-reflector-client
- -- BGP: no neighbor PEER route-reflector-client
-
-
-File: quagga.info, Node: Route Server, Next: How to set up a 6-Bone connection, Prev: Route Reflector, Up: BGP
-
-9.13 Route Server
-=================
-
-At an Internet Exchange point, many ISPs are connected to each other by
-external BGP peering. Normally these external BGP connection are done
-by `full mesh' method. As with internal BGP full mesh formation, this
-method has a scaling problem.
-
- This scaling problem is well known. Route Server is a method to
-resolve the problem. Each ISP's BGP router only peers to Route Server.
-Route Server serves as BGP information exchange to other BGP routers.
-By applying this method, numbers of BGP connections is reduced from
-O(n*(n-1)/2) to O(n).
-
- Unlike normal BGP router, Route Server must have several routing
-tables for managing different routing policies for each BGP speaker.
-We call the routing tables as different `view's. `bgpd' can work as
-normal BGP router or Route Server or both at the same time.
-
-* Menu:
-
-* Multiple instance::
-* BGP instance and view::
-* Routing policy::
-* Viewing the view::
-
-
-File: quagga.info, Node: Multiple instance, Next: BGP instance and view, Up: Route Server
-
-9.13.1 Multiple instance
-------------------------
-
-To enable multiple view function of `bgpd', you must turn on multiple
-instance feature beforehand.
-
- -- Command: bgp multiple-instance
- Enable BGP multiple instance feature. After this feature is
- enabled, you can make multiple BGP instances or multiple BGP views.
-
- -- Command: no bgp multiple-instance
- Disable BGP multiple instance feature. You can not disable this
- feature when BGP multiple instances or views exist.
-
- When you want to make configuration more Cisco like one,
-
- -- Command: bgp config-type cisco
- Cisco compatible BGP configuration output.
-
- When bgp config-type cisco is specified,
-
- "no synchronization" is displayed. "no auto-summary" is desplayed.
-
- "network" and "aggregate-address" argument is displayed as "A.B.C.D
-M.M.M.M"
-
- Quagga: network 10.0.0.0/8 Cisco: network 10.0.0.0
-
- Quagga: aggregate-address 192.168.0.0/24 Cisco: aggregate-address
-192.168.0.0 255.255.255.0
-
- Community attribute handling is also different. If there is no
-configuration is specified community attribute and extended community
-attribute are sent to neighbor. When user manually disable the feature
-community attribute is not sent to the neighbor. In case of `bgp
-config-type cisco' is specified, community attribute is not sent to the
-neighbor by default. To send community attribute user has to specify
-`neighbor A.B.C.D send-community' command.
-
- !
- router bgp 1
- neighbor 10.0.0.1 remote-as 1
- no neighbor 10.0.0.1 send-community
- !
- router bgp 1
- neighbor 10.0.0.1 remote-as 1
- neighbor 10.0.0.1 send-community
- !
-
- -- Command: bgp config-type zebra
- Quagga style BGP configuration. This is default.
-
-
-File: quagga.info, Node: BGP instance and view, Next: Routing policy, Prev: Multiple instance, Up: Route Server
-
-9.13.2 BGP instance and view
-----------------------------
-
-BGP instance is a normal BGP process. The result of route selection
-goes to the kernel routing table. You can setup different AS at the
-same time when BGP multiple instance feature is enabled.
-
- -- Command: router bgp AS-NUMBER
- Make a new BGP instance. You can use arbitrary word for the NAME.
-
- bgp multiple-instance
- !
- router bgp 1
- neighbor 10.0.0.1 remote-as 2
- neighbor 10.0.0.2 remote-as 3
- !
- router bgp 2
- neighbor 10.0.0.3 remote-as 4
- neighbor 10.0.0.4 remote-as 5
-
- BGP view is almost same as normal BGP process. The result of route
-selection does not go to the kernel routing table. BGP view is only
-for exchanging BGP routing information.
-
- -- Command: router bgp AS-NUMBER view NAME
- Make a new BGP view. You can use arbitrary word for the NAME.
- This view's route selection result does not go to the kernel
- routing table.
-
- With this command, you can setup Route Server like below.
-
- bgp multiple-instance
- !
- router bgp 1 view 1
- neighbor 10.0.0.1 remote-as 2
- neighbor 10.0.0.2 remote-as 3
- !
- router bgp 2 view 2
- neighbor 10.0.0.3 remote-as 4
- neighbor 10.0.0.4 remote-as 5
-
-
-File: quagga.info, Node: Routing policy, Next: Viewing the view, Prev: BGP instance and view, Up: Route Server
-
-9.13.3 Routing policy
----------------------
-
-You can set different routing policy for a peer. For example, you can
-set different filter for a peer.
-
- bgp multiple-instance
- !
- router bgp 1 view 1
- neighbor 10.0.0.1 remote-as 2
- neighbor 10.0.0.1 distribute-list 1 in
- !
- router bgp 1 view 2
- neighbor 10.0.0.1 remote-as 2
- neighbor 10.0.0.1 distribute-list 2 in
-
- This means BGP update from a peer 10.0.0.1 goes to both BGP view 1
-and view 2. When the update is inserted into view 1, distribute-list 1
-is applied. On the other hand, when the update is inserted into view 2,
-distribute-list 2 is applied.
-
-
-File: quagga.info, Node: Viewing the view, Prev: Routing policy, Up: Route Server
-
-9.13.4 Viewing the view
------------------------
-
-To display routing table of BGP view, you must specify view name.
-
- -- Command: show ip bgp view NAME
- Display routing table of BGP view NAME.
-
-
-File: quagga.info, Node: How to set up a 6-Bone connection, Next: Dump BGP packets and table, Prev: Route Server, Up: BGP
-
-9.14 How to set up a 6-Bone connection
-======================================
-
- zebra configuration
- ===================
- !
- ! Actually there is no need to configure zebra
- !
-
- bgpd configuration
- ==================
- !
- ! This means that routes go through zebra and into the kernel.
- !
- router zebra
- !
- ! MP-BGP configuration
- !
- router bgp 7675
- bgp router-id 10.0.0.1
- neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 remote-as AS-NUMBER
- !
- address-family ipv6
- network 3ffe:506::/32
- neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 activate
- neighbor 3ffe:1cfa:0:2:2a0:c9ff:fe9e:f56 route-map set-nexthop out
- neighbor 3ffe:1cfa:0:2:2c0:4fff:fe68:a231 remote-as AS-NUMBER
- neighbor 3ffe:1cfa:0:2:2c0:4fff:fe68:a231 route-map set-nexthop out
- exit-address-family
- !
- ipv6 access-list all permit any
- !
- ! Set output nexthop address.
- !
- route-map set-nexthop permit 10
- match ipv6 address all
- set ipv6 nexthop global 3ffe:1cfa:0:2:2c0:4fff:fe68:a225
- set ipv6 nexthop local fe80::2c0:4fff:fe68:a225
- !
- ! logfile FILENAME is obsolete. Please use log file FILENAME
-
- log file bgpd.log
- !
-
-
-File: quagga.info, Node: Dump BGP packets and table, Next: BGP Configuration Examples, Prev: How to set up a 6-Bone connection, Up: BGP
-
-9.15 Dump BGP packets and table
-===============================
-
- -- Command: dump bgp all PATH
- -- Command: dump bgp all PATH INTERVAL
- Dump all BGP packet and events to PATH file.
-
- -- Command: dump bgp updates PATH
- -- Command: dump bgp updates PATH INTERVAL
- Dump BGP updates to PATH file.
-
- -- Command: dump bgp routes PATH
- -- Command: dump bgp routes PATH
- Dump whole BGP routing table to PATH. This is heavy process.
-
-
-File: quagga.info, Node: BGP Configuration Examples, Prev: Dump BGP packets and table, Up: BGP
-
-9.16 BGP Configuration Examples
-===============================
-
-Example of a session to an upstream, advertising only one prefix to it.
-
- router bgp 64512
- bgp router-id 10.236.87.1
- network 10.236.87.0/24
- neighbor upstream peer-group
- neighbor upstream remote-as 64515
- neighbor upstream capability dynamic
- neighbor upstream prefix-list pl-allowed-adv out
- neighbor 10.1.1.1 peer-group upstream
- neighbor 10.1.1.1 description ACME ISP
- !
- ip prefix-list pl-allowed-adv seq 5 permit 82.195.133.0/25
- ip prefix-list pl-allowed-adv seq 10 deny any
-
- A more complex example. With upstream, peer and customer sessions.
-Advertising global prefixes and NO_EXPORT prefixes and providing
-actions for customer routes based on community values. Extensive use of
-route-maps and the 'call' feature to support selective advertising of
-prefixes. This example is intended as guidance only, it has NOT been
-tested and almost certainly containts silly mistakes, if not serious
-flaws.
-
- router bgp 64512
- bgp router-id 10.236.87.1
- network 10.123.456.0/24
- network 10.123.456.128/25 route-map rm-no-export
- neighbor upstream capability dynamic
- neighbor upstream route-map rm-upstream-out out
- neighbor cust capability dynamic
- neighbor cust route-map rm-cust-in in
- neighbor cust route-map rm-cust-out out
- neighbor cust send-community both
- neighbor peer capability dynamic
- neighbor peer route-map rm-peer-in in
- neighbor peer route-map rm-peer-out out
- neighbor peer send-community both
- neighbor 10.1.1.1 remote-as 64515
- neighbor 10.1.1.1 peer-group upstream
- neighbor 10.2.1.1 remote-as 64516
- neighbor 10.2.1.1 peer-group upstream
- neighbor 10.3.1.1 remote-as 64517
- neighbor 10.3.1.1 peer-group cust-default
- neighbor 10.3.1.1 description customer1
- neighbor 10.3.1.1 prefix-list pl-cust1-network in
- neighbor 10.4.1.1 remote-as 64518
- neighbor 10.4.1.1 peer-group cust
- neighbor 10.4.1.1 prefix-list pl-cust2-network in
- neighbor 10.4.1.1 description customer2
- neighbor 10.5.1.1 remote-as 64519
- neighbor 10.5.1.1 peer-group peer
- neighbor 10.5.1.1 prefix-list pl-peer1-network in
- neighbor 10.5.1.1 description peer AS 1
- neighbor 10.6.1.1 remote-as 64520
- neighbor 10.6.1.1 peer-group peer
- neighbor 10.6.1.1 prefix-list pl-peer2-network in
- neighbor 10.6.1.1 description peer AS 2
- !
- ip prefix-list pl-default permit 0.0.0.0/0
- !
- ip prefix-list pl-upstream-peers permit 10.1.1.1/32
- ip prefix-list pl-upstream-peers permit 10.2.1.1/32
- !
- ip prefix-list pl-cust1-network permit 10.3.1.0/24
- ip prefix-list pl-cust1-network permit 10.3.2.0/24
- !
- ip prefix-list pl-cust2-network permit 10.4.1.0/24
- !
- ip prefix-list pl-peer1-network permit 10.5.1.0/24
- ip prefix-list pl-peer1-network permit 10.5.2.0/24
- ip prefix-list pl-peer1-network permit 192.168.0.0/24
- !
- ip prefix-list pl-peer2-network permit 10.6.1.0/24
- ip prefix-list pl-peer2-network permit 10.6.2.0/24
- ip prefix-list pl-peer2-network permit 192.168.1.0/24
- ip prefix-list pl-peer2-network permit 192.168.2.0/24
- ip prefix-list pl-peer2-network permit 172.16.1/24
- !
- ip as-path access-list asp-own-as permit ^$
- ip as-path access-list asp-own-as permit _64512_
- !
- ! #################################################################
- ! Match communities we provide actions for, on routes receives from
- ! customers. Communities values of <our-ASN>:X, with X, have actions:
- !
- ! 100 - blackhole the prefix
- ! 200 - set no_export
- ! 300 - advertise only to other customers
- ! 400 - advertise only to upstreams
- ! 500 - set no_export when advertising to upstreams
- ! 2X00 - set local_preference to X00
- !
- ! blackhole the prefix of the route
- ip community-list standard cm-blackhole permit 64512:100
- !
- ! set no-export community before advertising
- ip community-list standard cm-set-no-export permit 64512:200
- !
- ! advertise only to other customers
- ip community-list standard cm-cust-only permit 64512:300
- !
- ! advertise only to upstreams
- ip community-list standard cm-upstream-only permit 64512:400
- !
- ! advertise to upstreams with no-export
- ip community-list standard cm-upstream-noexport permit 64512:500
- !
- ! set local-pref to least significant 3 digits of the community
- ip community-list standard cm-prefmod-100 permit 64512:2100
- ip community-list standard cm-prefmod-200 permit 64512:2200
- ip community-list standard cm-prefmod-300 permit 64512:2300
- ip community-list standard cm-prefmod-400 permit 64512:2400
- ip community-list expanded cme-prefmod-range permit 64512:2...
- !
- ! Informational communities
- !
- ! 3000 - learned from upstream
- ! 3100 - learned from customer
- ! 3200 - learned from peer
- !
- ip community-list standard cm-learnt-upstream permit 64512:3000
- ip community-list standard cm-learnt-cust permit 64512:3100
- ip community-list standard cm-learnt-peer permit 64512:3200
- !
- ! ###################################################################
- ! Utility route-maps
- !
- ! These utility route-maps generally should not used to permit/deny
- ! routes, i.e. they do not have meaning as filters, and hence probably
- ! should be used with 'on-match next'. These all finish with an empty
- ! permit entry so as not interfere with processing in the caller.
- !
- route-map rm-no-export permit 10
- set community additive no-export
- route-map rm-no-export permit 20
- !
- route-map rm-blackhole permit 10
- description blackhole, up-pref and ensure it cant escape this AS
- set ip next-hop 127.0.0.1
- set local-preference 10
- set community additive no-export
- route-map rm-blackhole permit 20
- !
- ! Set local-pref as requested
- route-map rm-prefmod permit 10
- match community cm-prefmod-100
- set local-preference 100
- route-map rm-prefmod permit 20
- match community cm-prefmod-200
- set local-preference 200
- route-map rm-prefmod permit 30
- match community cm-prefmod-300
- set local-preference 300
- route-map rm-prefmod permit 40
- match community cm-prefmod-400
- set local-preference 400
- route-map rm-prefmod permit 50
- !
- ! Community actions to take on receipt of route.
- route-map rm-community-in permit 10
- description check for blackholing, no point continuing if it matches.
- match community cm-blackhole
- call rm-blackhole
- route-map rm-community-in permit 20
- match community cm-set-no-export
- call rm-no-export
- on-match next
- route-map rm-community-in permit 30
- match community cme-prefmod-range
- call rm-prefmod
- route-map rm-community-in permit 40
- !
- ! #####################################################################
- ! Community actions to take when advertising a route.
- ! These are filtering route-maps,
- !
- ! Deny customer routes to upstream with cust-only set.
- route-map rm-community-filt-to-upstream deny 10
- match community cm-learnt-cust
- match community cm-cust-only
- route-map rm-community-filt-to-upstream permit 20
- !
- ! Deny customer routes to other customers with upstream-only set.
- route-map rm-community-filt-to-cust deny 10
- match community cm-learnt-cust
- match community cm-upstream-only
- route-map rm-community-filt-to-cust permit 20
- !
- ! ###################################################################
- ! The top-level route-maps applied to sessions. Further entries could
- ! be added obviously..
- !
- ! Customers
- route-map rm-cust-in permit 10
- call rm-community-in
- on-match next
- route-map rm-cust-in permit 20
- set community additive 64512:3100
- route-map rm-cust-in permit 30
- !
- route-map rm-cust-out permit 10
- call rm-community-filt-to-cust
- on-match next
- route-map rm-cust-out permit 20
- !
- ! Upstream transit ASes
- route-map rm-upstream-out permit 10
- description filter customer prefixes which are marked cust-only
- call rm-community-filt-to-upstream
- on-match next
- route-map rm-upstream-out permit 20
- description only customer routes are provided to upstreams/peers
- match community cm-learnt-cust
- !
- ! Peer ASes
- ! outbound policy is same as for upstream
- route-map rm-peer-out permit 10
- call rm-upstream-out
- !
- route-map rm-peer-in permit 10
- set community additive 64512:3200
-
-
-File: quagga.info, Node: Configuring Quagga as a Route Server, Next: VTY shell, Prev: BGP, Up: Top
-
-10 Configuring Quagga as a Route Server
-***************************************
-
-The purpose of a Route Server is to centralize the peerings between BGP
-speakers. For example if we have an exchange point scenario with four
-BGP speakers, each of which maintaining a BGP peering with the other
-three (*note fig:full-mesh::), we can convert it into a centralized
-scenario where each of the four establishes a single BGP peering
-against the Route Server (*note fig:route-server::).
-
- We will first describe briefly the Route Server model implemented by
-Quagga. We will explain the commands that have been added for
-configuring that model. And finally we will show a full example of
-Quagga configured as Route Server.
-
-* Menu:
-
-* Description of the Route Server model::
-* Commands for configuring a Route Server::
-* Example of Route Server Configuration::
-
-
-File: quagga.info, Node: Description of the Route Server model, Next: Commands for configuring a Route Server, Up: Configuring Quagga as a Route Server
-
-10.1 Description of the Route Server model
-==========================================
-
-First we are going to describe the normal processing that BGP
-announcements suffer inside a standard BGP speaker, as shown in *Note
-fig:normal-processing::, it consists of three steps:
-
- * When an announcement is received from some peer, the `In' filters
- configured for that peer are applied to the announcement. These
- filters can reject the announcement, accept it unmodified, or
- accept it with some of its attributes modified.
-
- * The announcements that pass the `In' filters go into the Best Path
- Selection process, where they are compared to other announcements
- referred to the same destination that have been received from
- different peers (in case such other announcements exist). For each
- different destination, the announcement which is selected as the
- best is inserted into the BGP speaker's Loc-RIB.
-
- * The routes which are inserted in the Loc-RIB are considered for
- announcement to all the peers (except the one from which the route
- came). This is done by passing the routes in the Loc-RIB through
- the `Out' filters corresponding to each peer. These filters can
- reject the route, accept it unmodified, or accept it with some of
- its attributes modified. Those routes which are accepted by the
- `Out' filters of a peer are announced to that peer.
-
-
- _______________________________
- / _________ _________ \
-From Peer A --->|(A)-|Best | | |-[A]|--->To Peer A
-From Peer B --->|(B)-|Path |-->|Local-RIB|-[B]|--->To Peer B
-From Peer C --->|(C)-|Selection| | |-[C]|--->To Peer C
-From Peer D --->|(D)-|_________| |_________|-[D]|--->To Peer D
- \_______________________________/
-
-Key: (X) - 'In' Filter applied to Peer X's announcements
- [X] - 'Out' Filter applied to announcements to Peer X
-
-Figure 10.1: Announcement processing inside a "normal" BGP speaker
-
-(RF1)--(RF2)
- | \ / |
- | \/ |
- | /\ |
- | / \ |
-(RF3)--(RF4)
-
-Figure 10.2: Full Mesh
-
-(RF1) (RF2)
- \ /
- [RS]
- / \
-(RF3) (RF4)
-
-Figure 10.3: Route Server and clients
-
- Of course we want that the routing tables obtained in each of the
-routers are the same when using the route server than when not. But as
-a consequence of having a single BGP peering (against the route
-server), the BGP speakers can no longer distinguish from/to which peer
-each announce comes/goes. This means that the routers connected to the
-route server are not able to apply by themselves the same input/output
-filters as in the full mesh scenario, so they have to delegate those
-functions to the route server.
-
- Even more, the "best path" selection must be also performed inside
-the route server on behalf of its clients. The reason is that if, after
-applying the filters of the announcer and the (potential) receiver, the
-route server decides to send to some client two or more different
-announcements referred to the same destination, the client will only
-retain the last one, considering it as an implicit withdrawal of the
-previous announcements for the same destination. This is the expected
-behavior of a BGP speaker as defined in `RFC1771', and even though
-there are some proposals of mechanisms that permit multiple paths for
-the same destination to be sent through a single BGP peering, none are
-currently supported by most existing BGP implementations.
-
- As a consequence a route server must maintain additional information
-and perform additional tasks for a RS-client that those necessary for
-common BGP peerings. Essentially a route server must:
-
- * Maintain a separated Routing Information Base (Loc-RIB) for each
- peer configured as RS-client, containing the routes selected as a
- result of the "Best Path Selection" process that is performed on
- behalf of that RS-client.
-
- * Whenever it receives an announcement from a RS-client, it must
- consider it for the Loc-RIBs of the other RS-clients.
-
- * This means that for each of them the route server must pass
- the announcement through the appropriate `Out' filter of the
- announcer.
-
- * Then through the appropriate `In' filter of the potential
- receiver.
-
- * Only if the announcement is accepted by both filters it will
- be passed to the "Best Path Selection" process.
-
- * Finally, it might go into the Loc-RIB of the receiver.
-
- When we talk about the "appropriate" filter, both the announcer and
-the receiver of the route must be taken into account. Suppose that the
-route server receives an announcement from client A, and the route
-server is considering it for the Loc-RIB of client B. The filters that
-should be applied are the same that would be used in the full mesh
-scenario, i.e., first the `Out' filter of router A for announcements
-going to router B, and then the `In' filter of router B for
-announcements coming from router A.
-
- We call "Export Policy" of a RS-client to the set of `Out' filters
-that the client would use if there was no route server. The same
-applies for the "Import Policy" of a RS-client and the set of `In'
-filters of the client if there was no route server.
-
- It is also common to demand from a route server that it does not
-modify some BGP attributes (next-hop, as-path and MED) that are usually
-modified by standard BGP speakers before announcing a route.
-
- The announcement processing model implemented by Quagga is shown in
-*Note fig:rs-processing::. The figure shows a mixture of RS-clients (B,
-C and D) with normal BGP peers (A). There are some details that worth
-additional comments:
-
- * Announcements coming from a normal BGP peer are also considered
- for the Loc-RIBs of all the RS-clients. But logically they do not
- pass through any export policy.
-
- * Those peers that are configured as RS-clients do not receive any
- announce from the `Main' Loc-RIB.
-
- * Apart from import and export policies, `In' and `Out' filters can
- also be set for RS-clients. `In' filters might be useful when the
- route server has also normal BGP peers. On the other hand, `Out'
- filters for RS-clients are probably unnecessary, but we decided
- not to remove them as they do not hurt anybody (they can always be
- left empty).
-
-
- | From RS-Client B
- | | From RS-Client C
- | | | From RS-Client D
- | | | |
- | | | | Main / Normal RIB
- | | | | ________________________________
- | | | | / _________ _________ \\
- | | | +--->|(D)-|Best | | Main | |
- | | +--|--->|(C)-|Path |-->|Local-RIB|->[A]|--->To Peer A
- | +--|--|--->|(B)-|Selection| | | |
- +--|--|--|--->|(A)-|_________| |_________| |
- | | | | \\________________________________/
- | | | |
- | | | | ________________________________
- | | | | / _________ _________ \\
- | | | +--->*D*->|{B}-|Best | |RS-Client| |
- | | +--|--->*C*->|{B}-|Path |-->|Local-RIB|->[B]|--->To RS-Client B
- | | | | | |Selection| | for B | |
- +--|--|--|-------->|{B}-|_________| |_________| |
- | | | | \\________________________________/
- | | | |
- | | | | ________________________________
- | | | | / _________ _________ \\
- | | | +--->*D*->|{C}-|Best | |RS-Client| |
- | | | | | |Path |-->|Local-RIB|->[C]|--->To RS-Client C
- | +--|--|--->*B*->|{C}-|Selection| | for C | |
- +--|--|--|-------->|{C}-|_________| |_________| |
- | | | \\________________________________/
- | | |
- | | | ________________________________
- | | | / _________ _________ \\
- | | | | |Best | |RS-Client| |
- | | +------>*C*->|{D}-|Path |-->|Local-RIB|->[D]|--->To RS-Client D
- | +--------->*B*->|{D}-|Selection| | for D | |
- +----------------->|{D}-|_________| |_________| |
- \\________________________________/
-
-
-Key: (X) - 'In' Filter applied to Peer X's announcements before
- considering announcement for the normal main Local-RIB
- [X] - 'Out' Filter applied to announcements to Peer X
- *X* - 'Export' Filter of RS-Client X, to apply X's policies
- before its routes may be considered for other RS-Clients
- RIBs.
- {X} - 'Import' Filter of RS-Client X, to apply X's policies
- on routes before allowing them into X's RIB.
-"
-
-Figure 10.4: Announcement processing model implemented by the Route Server
-
-
-File: quagga.info, Node: Commands for configuring a Route Server, Next: Example of Route Server Configuration, Prev: Description of the Route Server model, Up: Configuring Quagga as a Route Server
-
-10.2 Commands for configuring a Route Server
-============================================
-
-Now we will describe the commands that have been added to quagga in
-order to support the route server features.
-
- -- Route-Server: neighbor PEER-GROUP route-server-client
- -- Route-Server: neighbor A.B.C.D route-server-client
- -- Route-Server: neighbor X:X::X:X route-server-client
- This command configures the peer given by PEER, A.B.C.D or
- X:X::X:X as an RS-client.
-
- Actually this command is not new, it already existed in standard
- Quagga. It enables the transparent mode for the specified peer.
- This means that some BGP attributes (as-path, next-hop and MED) of
- the routes announced to that peer are not modified.
-
- With the route server patch, this command, apart from setting the
- transparent mode, creates a new Loc-RIB dedicated to the specified
- peer (those named `Loc-RIB for X' in *Note Figure 10.4:
- fig:rs-processing.). Starting from that moment, every announcement
- received by the route server will be also considered for the new
- Loc-RIB.
-
- -- Route-Server: neigbor {A.B.C.D|X.X::X.X|peer-group} route-map WORD
-{import|export}
- This set of commands can be used to specify the route-map that
- represents the Import or Export policy of a peer which is
- configured as a RS-client (with the previous command).
-
- -- Route-Server: match peer {A.B.C.D|X:X::X:X}
- This is a new _match_ statement for use in route-maps, enabling
- them to describe import/export policies. As we said before, an
- import/export policy represents a set of input/output filters of
- the RS-client. This statement makes possible that a single
- route-map represents the full set of filters that a BGP speaker
- would use for its different peers in a non-RS scenario.
-
- The _match peer_ statement has different semantics whether it is
- used inside an import or an export route-map. In the first case
- the statement matches if the address of the peer who sends the
- announce is the same that the address specified by
- {A.B.C.D|X:X::X:X}. For export route-maps it matches when
- {A.B.C.D|X:X::X:X} is the address of the RS-Client into whose
- Loc-RIB the announce is going to be inserted (how the same export
- policy is applied before different Loc-RIBs is shown in *Note
- Figure 10.4: fig:rs-processing.).
-
- -- Route-map Command: call WORD
- This command (also used inside a route-map) jumps into a different
- route-map, whose name is specified by WORD. When the called
- route-map finishes, depending on its result the original route-map
- continues or not. Apart from being useful for making import/export
- route-maps easier to write, this command can also be used inside
- any normal (in or out) route-map.
-
-
-File: quagga.info, Node: Example of Route Server Configuration, Prev: Commands for configuring a Route Server, Up: Configuring Quagga as a Route Server
-
-10.3 Example of Route Server Configuration
-==========================================
-
-Finally we are going to show how to configure a Quagga daemon to act as
-a Route Server. For this purpose we are going to present a scenario
-without route server, and then we will show how to use the
-configurations of the BGP routers to generate the configuration of the
-route server.
-
- All the configuration files shown in this section have been taken
-from scenarios which were tested using the VNUML tool VNUML
-(http://www.dit.upm.es/vnuml).
-
-* Menu:
-
-* Configuration of the BGP routers without Route Server::
-* Configuration of the BGP routers with Route Server::
-* Configuration of the Route Server itself::
-* Further considerations about Import and Export route-maps::
-
-
-File: quagga.info, Node: Configuration of the BGP routers without Route Server, Next: Configuration of the BGP routers with Route Server, Up: Example of Route Server Configuration
-
-10.3.1 Configuration of the BGP routers without Route Server
-------------------------------------------------------------
-
-We will suppose that our initial scenario is an exchange point with
-three BGP capable routers, named RA, RB and RC. Each of the BGP
-speakers generates some routes (with the NETWORK command), and
-establishes BGP peerings against the other two routers. These peerings
-have In and Out route-maps configured, named like "PEER-X-IN" or
-"PEER-X-OUT". For example the configuration file for router RA could be
-the following:
-
- #Configuration for router 'RA'
- !
- hostname RA
- password ****
- !
- router bgp 65001
- no bgp default ipv4-unicast
- neighbor 2001:0DB8::B remote-as 65002
- neighbor 2001:0DB8::C remote-as 65003
- !
- address-family ipv6
- network 2001:0DB8:AAAA:1::/64
- network 2001:0DB8:AAAA:2::/64
- network 2001:0DB8:0000:1::/64
- network 2001:0DB8:0000:2::/64
-
- neighbor 2001:0DB8::B activate
- neighbor 2001:0DB8::B soft-reconfiguration inbound
- neighbor 2001:0DB8::B route-map PEER-B-IN in
- neighbor 2001:0DB8::B route-map PEER-B-OUT out
-
- neighbor 2001:0DB8::C activate
- neighbor 2001:0DB8::C soft-reconfiguration inbound
- neighbor 2001:0DB8::C route-map PEER-C-IN in
- neighbor 2001:0DB8::C route-map PEER-C-OUT out
- exit-address-family
- !
- ipv6 prefix-list COMMON-PREFIXES seq 5 permit 2001:0DB8:0000::/48 ge 64 le 64
- ipv6 prefix-list COMMON-PREFIXES seq 10 deny any
- !
- ipv6 prefix-list PEER-A-PREFIXES seq 5 permit 2001:0DB8:AAAA::/48 ge 64 le 64
- ipv6 prefix-list PEER-A-PREFIXES seq 10 deny any
- !
- ipv6 prefix-list PEER-B-PREFIXES seq 5 permit 2001:0DB8:BBBB::/48 ge 64 le 64
- ipv6 prefix-list PEER-B-PREFIXES seq 10 deny any
- !
- ipv6 prefix-list PEER-C-PREFIXES seq 5 permit 2001:0DB8:CCCC::/48 ge 64 le 64
- ipv6 prefix-list PEER-C-PREFIXES seq 10 deny any
- !
- route-map PEER-B-IN permit 10
- match ipv6 address prefix-list COMMON-PREFIXES
- set metric 100
- route-map PEER-B-IN permit 20
- match ipv6 address prefix-list PEER-B-PREFIXES
- set community 65001:11111
- !
- route-map PEER-C-IN permit 10
- match ipv6 address prefix-list COMMON-PREFIXES
- set metric 200
- route-map PEER-C-IN permit 20
- match ipv6 address prefix-list PEER-C-PREFIXES
- set community 65001:22222
- !
- route-map PEER-B-OUT permit 10
- match ipv6 address prefix-list PEER-A-PREFIXES
- !
- route-map PEER-C-OUT permit 10
- match ipv6 address prefix-list PEER-A-PREFIXES
- !
- line vty
- !
-
-
-File: quagga.info, Node: Configuration of the BGP routers with Route Server, Next: Configuration of the Route Server itself, Prev: Configuration of the BGP routers without Route Server, Up: Example of Route Server Configuration
-
-10.3.2 Configuration of the BGP routers with Route Server
----------------------------------------------------------
-
-To convert the initial scenario into one with route server, first we
-must modify the configuration of routers RA, RB and RC. Now they must
-not peer between them, but only with the route server. For example, RA's
-configuration would turn into:
-
- # Configuration for router 'RA'
- !
- hostname RA
- password ****
- !
- router bgp 65001
- no bgp default ipv4-unicast
- neighbor 2001:0DB8::FFFF remote-as 65000
- !
- address-family ipv6
- network 2001:0DB8:AAAA:1::/64
- network 2001:0DB8:AAAA:2::/64
- network 2001:0DB8:0000:1::/64
- network 2001:0DB8:0000:2::/64
-
- neighbor 2001:0DB8::FFFF activate
- neighbor 2001:0DB8::FFFF soft-reconfiguration inbound
- exit-address-family
- !
- line vty
- !
-
- Which is logically much simpler than its initial configuration, as
-it now maintains only one BGP peering and all the filters (route-maps)
-have disappeared.
-
-
-File: quagga.info, Node: Configuration of the Route Server itself, Next: Further considerations about Import and Export route-maps, Prev: Configuration of the BGP routers with Route Server, Up: Example of Route Server Configuration
-
-10.3.3 Configuration of the Route Server itself
------------------------------------------------
-
-As we said when we described the functions of a route server (*note
-Description of the Route Server model::), it is in charge of all the
-route filtering. To achieve that, the In and Out filters from the RA,
-RB and RC configurations must be converted into Import and Export
-policies in the route server.
-
- This is a fragment of the route server configuration (we only show
-the policies for client RA):
-
- # Configuration for Route Server ('RS')
- !
- hostname RS
- password ix
- !
- bgp multiple-instance
- !
- router bgp 65000 view RS
- no bgp default ipv4-unicast
- neighbor 2001:0DB8::A remote-as 65001
- neighbor 2001:0DB8::B remote-as 65002
- neighbor 2001:0DB8::C remote-as 65003
- !
- address-family ipv6
- neighbor 2001:0DB8::A activate
- neighbor 2001:0DB8::A route-server-client
- neighbor 2001:0DB8::A route-map RSCLIENT-A-IMPORT import
- neighbor 2001:0DB8::A route-map RSCLIENT-A-EXPORT export
- neighbor 2001:0DB8::A soft-reconfiguration inbound
-
- neighbor 2001:0DB8::B activate
- neighbor 2001:0DB8::B route-server-client
- neighbor 2001:0DB8::B route-map RSCLIENT-B-IMPORT import
- neighbor 2001:0DB8::B route-map RSCLIENT-B-EXPORT export
- neighbor 2001:0DB8::B soft-reconfiguration inbound
-
- neighbor 2001:0DB8::C activate
- neighbor 2001:0DB8::C route-server-client
- neighbor 2001:0DB8::C route-map RSCLIENT-C-IMPORT import
- neighbor 2001:0DB8::C route-map RSCLIENT-C-EXPORT export
- neighbor 2001:0DB8::C soft-reconfiguration inbound
- exit-address-family
- !
- ipv6 prefix-list COMMON-PREFIXES seq 5 permit 2001:0DB8:0000::/48 ge 64 le 64
- ipv6 prefix-list COMMON-PREFIXES seq 10 deny any
- !
- ipv6 prefix-list PEER-A-PREFIXES seq 5 permit 2001:0DB8:AAAA::/48 ge 64 le 64
- ipv6 prefix-list PEER-A-PREFIXES seq 10 deny any
- !
- ipv6 prefix-list PEER-B-PREFIXES seq 5 permit 2001:0DB8:BBBB::/48 ge 64 le 64
- ipv6 prefix-list PEER-B-PREFIXES seq 10 deny any
- !
- ipv6 prefix-list PEER-C-PREFIXES seq 5 permit 2001:0DB8:CCCC::/48 ge 64 le 64
- ipv6 prefix-list PEER-C-PREFIXES seq 10 deny any
- !
- route-map RSCLIENT-A-IMPORT permit 10
- match peer 2001:0DB8::B
- call A-IMPORT-FROM-B
- route-map RSCLIENT-A-IMPORT permit 20
- match peer 2001:0DB8::C
- call A-IMPORT-FROM-C
- !
- route-map A-IMPORT-FROM-B permit 10
- match ipv6 address prefix-list COMMON-PREFIXES
- set metric 100
- route-map A-IMPORT-FROM-B permit 20
- match ipv6 address prefix-list PEER-B-PREFIXES
- set community 65001:11111
- !
- route-map A-IMPORT-FROM-C permit 10
- match ipv6 address prefix-list COMMON-PREFIXES
- set metric 200
- route-map A-IMPORT-FROM-C permit 20
- match ipv6 address prefix-list PEER-C-PREFIXES
- set community 65001:22222
- !
- route-map RSCLIENT-A-EXPORT permit 10
- match peer 2001:0DB8::B
- match ipv6 address prefix-list PEER-A-PREFIXES
- route-map RSCLIENT-A-EXPORT permit 20
- match peer 2001:0DB8::C
- match ipv6 address prefix-list PEER-A-PREFIXES
- !
- ...
- ...
- ...
-
- If you compare the initial configuration of RA with the route server
-configuration above, you can see how easy it is to generate the Import
-and Export policies for RA from the In and Out route-maps of RA's
-original configuration.
-
- When there was no route server, RA maintained two peerings, one with
-RB and another with RC. Each of this peerings had an In route-map
-configured. To build the Import route-map for client RA in the route
-server, simply add route-map entries following this scheme:
-
- route-map <NAME> permit 10
- match peer <Peer Address>
- call <In Route-Map for this Peer>
- route-map <NAME> permit 20
- match peer <Another Peer Address>
- call <In Route-Map for this Peer>
-
- This is exactly the process that has been followed to generate the
-route-map RSCLIENT-A-IMPORT. The route-maps that are called inside it
-(A-IMPORT-FROM-B and A-IMPORT-FROM-C) are exactly the same than the In
-route-maps from the original configuration of RA (PEER-B-IN and
-PEER-C-IN), only the name is different.
-
- The same could have been done to create the Export policy for RA
-(route-map RSCLIENT-A-EXPORT), but in this case the original Out
-route-maps where so simple that we decided not to use the CALL WORD
-commands, and we integrated all in a single route-map
-(RSCLIENT-A-EXPORT).
-
- The Import and Export policies for RB and RC are not shown, but the
-process would be identical.
-
-
-File: quagga.info, Node: Further considerations about Import and Export route-maps, Prev: Configuration of the Route Server itself, Up: Example of Route Server Configuration
-
-10.3.4 Further considerations about Import and Export route-maps
-----------------------------------------------------------------
-
-The current version of the route server patch only allows to specify a
-route-map for import and export policies, while in a standard BGP
-speaker apart from route-maps there are other tools for performing
-input and output filtering (access-lists, community-lists, ...). But
-this does not represent any limitation, as all kinds of filters can be
-included in import/export route-maps. For example suppose that in the
-non-route-server scenario peer RA had the following filters configured
-for input from peer B:
-
- neighbor 2001:0DB8::B prefix-list LIST-1 in
- neighbor 2001:0DB8::B filter-list LIST-2 in
- neighbor 2001:0DB8::B route-map PEER-B-IN in
- ...
- ...
- route-map PEER-B-IN permit 10
- match ipv6 address prefix-list COMMON-PREFIXES
- set local-preference 100
- route-map PEER-B-IN permit 20
- match ipv6 address prefix-list PEER-B-PREFIXES
- set community 65001:11111
-
- It is posible to write a single route-map which is equivalent to the
-three filters (the community-list, the prefix-list and the route-map).
-That route-map can then be used inside the Import policy in the route
-server. Lets see how to do it:
-
- neighbor 2001:0DB8::A route-map RSCLIENT-A-IMPORT import
- ...
- !
- ...
- route-map RSCLIENT-A-IMPORT permit 10
- match peer 2001:0DB8::B
- call A-IMPORT-FROM-B
- ...
- ...
- !
- route-map A-IMPORT-FROM-B permit 1
- match ipv6 address prefix-list LIST-1
- match as-path LIST-2
- on-match goto 10
- route-map A-IMPORT-FROM-B deny 2
- route-map A-IMPORT-FROM-B permit 10
- match ipv6 address prefix-list COMMON-PREFIXES
- set local-preference 100
- route-map A-IMPORT-FROM-B permit 20
- match ipv6 address prefix-list PEER-B-PREFIXES
- set community 65001:11111
- !
- ...
- ...
-
- The route-map A-IMPORT-FROM-B is equivalent to the three filters
-(LIST-1, LIST-2 and PEER-B-IN). The first entry of route-map
-A-IMPORT-FROM-B (sequence number 1) matches if and only if both the
-prefix-list LIST-1 and the filter-list LIST-2 match. If that happens,
-due to the "on-match goto 10" statement the next route-map entry to be
-processed will be number 10, and as of that point route-map
-A-IMPORT-FROM-B is identical to PEER-B-IN. If the first entry does not
-match, `on-match goto 10" will be ignored and the next processed entry
-will be number 2, which will deny the route.
-
- Thus, the result is the same that with the three original filters,
-i.e., if either LIST-1 or LIST-2 rejects the route, it does not reach
-the route-map PEER-B-IN. In case both LIST-1 and LIST-2 accept the
-route, it passes to PEER-B-IN, which can reject, accept or modify the
-route.
-
-
-File: quagga.info, Node: VTY shell, Next: Filtering, Prev: Configuring Quagga as a Route Server, Up: Top
-
-11 VTY shell
-************
-
-`vtysh' is integrated shell of Quagga software.
-
- To use vtysh please specify --enable-vtysh to configure script. To
-use PAM for authentication use --with-libpam option to configure script.
-
- vtysh only searches /etc/quagga path for vtysh.conf which is the
-vtysh configuration file. Vtysh does not search current directory for
-configuration file because the file includes user authentication
-settings.
-
- Currently, vtysh.conf has only two commands.
-
-* Menu:
-
-* VTY shell username::
-* VTY shell integrated configuration::
-
-
-File: quagga.info, Node: VTY shell username, Next: VTY shell integrated configuration, Up: VTY shell
-
-11.1 VTY shell username
-=======================
-
- -- Command: username USERNAME nopassword
- With this set, user foo does not need password authentication for
- user vtysh. With PAM vtysh uses PAM authentication mechanism.
-
- If vtysh is compiled without PAM authentication, every user can
- use vtysh without authentication. vtysh requires read/write
- permission to the various daemons vty sockets, this can be
- accomplished through use of unix groups and the -enable-vty-group
- configure option.
-
-
-
-File: quagga.info, Node: VTY shell integrated configuration, Prev: VTY shell username, Up: VTY shell
-
-11.2 VTY shell integrated configuration
-=======================================
-
- -- Command: service integrated-vtysh-config
- Write out integrated Quagga.conf file when 'write file' is issued.
-
- This command controls the behaviour of vtysh when it is told to
- write out the configuration. Per default, vtysh will instruct
- each daemon to write out their own config files when `write file'
- is issued. However, if `service integrated-vtysh-config' is set,
- when `write file' is issued, vtysh will instruct the daemons will
- write out a Quagga.conf with all daemons' commands integrated into
- it.
-
- Vtysh per default behaves as if `write-conf daemon' is set. Note
- that both may be set at same time if one wishes to have both
- Quagga.conf and daemon specific files written out. Further, note
- that the daemons are hard-coded to first look for the integrated
- Quagga.conf file before looking for their own file.
-
- We recommend you do not mix the use of the two types of files.
- Further, it is better not to use the integrated Quagga.conf file,
- as any syntax error in it can lead to /all/ of your daemons being
- unable to start up. Per daemon files are more robust as impact of
- errors in configuration are limited to the daemon in whose file
- the error is made.
-
-
-
-File: quagga.info, Node: Filtering, Next: Route Map, Prev: VTY shell, Up: Top
-
-12 Filtering
-************
-
-Quagga provides many very flexible filtering features. Filtering is
-used for both input and output of the routing information. Once
-filtering is defined, it can be applied in any direction.
-
-* Menu:
-
-* IP Access List::
-* IP Prefix List::
-
-
-File: quagga.info, Node: IP Access List, Next: IP Prefix List, Up: Filtering
-
-12.1 IP Access List
-===================
-
- -- Command: access-list NAME permit IPV4-NETWORK
- -- Command: access-list NAME deny IPV4-NETWORK
-
- Basic filtering is done by `access-list' as shown in the following
-example.
-
- access-list filter deny 10.0.0.0/9
- access-list filter permit 10.0.0.0/8
-
-
-File: quagga.info, Node: IP Prefix List, Prev: IP Access List, Up: Filtering
-
-12.2 IP Prefix List
-===================
-
-`ip prefix-list' provides the most powerful prefix based filtering
-mechanism. In addition to `access-list' functionality, `ip
-prefix-list' has prefix length range specification and sequential
-number specification. You can add or delete prefix based filters to
-arbitrary points of prefix-list using sequential number specification.
-
- If no ip prefix-list is specified, it acts as permit. If `ip
-prefix-list' is defined, and no match is found, default deny is applied.
-
- -- Command: ip prefix-list NAME (permit|deny) PREFIX [le LEN] [ge LEN]
- -- Command: ip prefix-list NAME seq NUMBER (permit|deny) PREFIX [le
-LEN] [ge LEN]
- You can create `ip prefix-list' using above commands.
-
- seq
- seq NUMBER can be set either automatically or manually. In
- the case that sequential numbers are set manually, the user
- may pick any number less than 4294967295. In the case that
- sequential number are set automatically, the sequential
- number will increase by a unit of five (5) per list. If a
- list with no specified sequential number is created after a
- list with a specified sequential number, the list will
- automatically pick the next multiple of five (5) as the list
- number. For example, if a list with number 2 already exists
- and a new list with no specified number is created, the next
- list will be numbered 5. If lists 2 and 7 already exist and
- a new list with no specified number is created, the new list
- will be numbered 10.
-
- le
- `le' command specifies prefix length. The prefix list will be
- applied if the prefix length is less than or equal to the le
- prefix length.
-
- ge
- `ge' command specifies prefix length. The prefix list will be
- applied if the prefix length is greater than or equal to the
- ge prefix length.
-
-
-
- Less than or equal to prefix numbers and greater than or equal to
-prefix numbers can be used together. The order of the le and ge
-commands does not matter.
-
- If a prefix list with a different sequential number but with the
-exact same rules as a previous list is created, an error will result.
-However, in the case that the sequential number and the rules are
-exactly similar, no error will result.
-
- If a list with the same sequential number as a previous list is
-created, the new list will overwrite the old list.
-
- Matching of IP Prefix is performed from the smaller sequential
-number to the larger. The matching will stop once any rule has been
-applied.
-
- In the case of no le or ge command, the prefix length must match
-exactly the length specified in the prefix list.
-
- -- Command: no ip prefix-list NAME
-
-* Menu:
-
-* ip prefix-list description::
-* ip prefix-list sequential number control::
-* Showing ip prefix-list::
-* Clear counter of ip prefix-list::
-
-
-File: quagga.info, Node: ip prefix-list description, Next: ip prefix-list sequential number control, Up: IP Prefix List
-
-12.2.1 ip prefix-list description
----------------------------------
-
- -- Command: ip prefix-list NAME description DESC
- Descriptions may be added to prefix lists. This command adds a
- description to the prefix list.
-
- -- Command: no ip prefix-list NAME description [DESC]
- Deletes the description from a prefix list. It is possible to use
- the command without the full description.
-
-
-File: quagga.info, Node: ip prefix-list sequential number control, Next: Showing ip prefix-list, Prev: ip prefix-list description, Up: IP Prefix List
-
-12.2.2 ip prefix-list sequential number control
------------------------------------------------
-
- -- Command: ip prefix-list sequence-number
- With this command, the IP prefix list sequential number is
- displayed. This is the default behavior.
-
- -- Command: no ip prefix-list sequence-number
- With this command, the IP prefix list sequential number is not
- displayed.
-
-
-File: quagga.info, Node: Showing ip prefix-list, Next: Clear counter of ip prefix-list, Prev: ip prefix-list sequential number control, Up: IP Prefix List
-
-12.2.3 Showing ip prefix-list
------------------------------
-
- -- Command: show ip prefix-list
- Display all IP prefix lists.
-
- -- Command: show ip prefix-list NAME
- Show IP prefix list can be used with a prefix list name.
-
- -- Command: show ip prefix-list NAME seq NUM
- Show IP prefix list can be used with a prefix list name and
- sequential number.
-
- -- Command: show ip prefix-list NAME A.B.C.D/M
- If the command longer is used, all prefix lists with prefix
- lengths equal to or longer than the specified length will be
- displayed. If the command first match is used, the first prefix
- length match will be displayed.
-
- -- Command: show ip prefix-list NAME A.B.C.D/M longer
-
- -- Command: show ip prefix-list NAME A.B.C.D/M first-match
-
- -- Command: show ip prefix-list summary
-
- -- Command: show ip prefix-list summary NAME
-
- -- Command: show ip prefix-list detail
-
- -- Command: show ip prefix-list detail NAME
-
-
-File: quagga.info, Node: Clear counter of ip prefix-list, Prev: Showing ip prefix-list, Up: IP Prefix List
-
-12.2.4 Clear counter of ip prefix-list
---------------------------------------
-
- -- Command: clear ip prefix-list
- Clears the counters of all IP prefix lists. Clear IP Prefix List
- can be used with a specified name and prefix.
-
- -- Command: clear ip prefix-list NAME
-
- -- Command: clear ip prefix-list NAME A.B.C.D/M
-
-
-File: quagga.info, Node: Route Map, Next: IPv6 Support, Prev: Filtering, Up: Top
-
-13 Route Map
-************
-
-Route maps provide a means to both filter and/or apply actions to
-route, hence allowing policy to be applied to routes.
-
-* Menu:
-
-* Route Map Command::
-* Route Map Match Command::
-* Route Map Set Command::
-* Route Map Call Command::
-* Route Map Exit Action Command::
-* Route Map Examples::
-
- Route-maps are an ordered list of route-map entries. Each entry may
-specify up to four distincts sets of clauses:
-
-`Matching Policy'
- This specifies the policy implied if the `Matching Conditions' are
- met or not met, and which actions of the route-map are to be
- taken, if any. The two possibilities are:
-
- - `permit': If the entry matches, then carry out the `Set
- Actions'. Then finish processing the route-map, permitting
- the route, unless an `Exit Action' indicates otherwise.
-
- - `deny': If the entry matches, then finish processing the
- route-map and deny the route (return `deny').
-
- The `Matching Policy' is specified as part of the command which
- defines the ordered entry in the route-map. See below.
-
-`Matching Conditions'
- A route-map entry may, optionally, specify one or more conditions
- which must be matched if the entry is to be considered further, as
- governed by the Match Policy. If a route-map entry does not
- explicitely specify any matching conditions, then it always
- matches.
-
-`Set Actions'
- A route-map entry may, optionally, specify one or more `Set
- Actions' to set or modify attributes of the route.
-
-`Call Action'
- Call to another route-map, after any `Set Actions' have been
- carried out. If the route-map called returns `deny' then
- processing of the route-map finishes and the route is denied,
- regardless of the `Matching Policy' or the `Exit Policy'. If the
- called route-map returns `permit', then `Matching Policy' and
- `Exit Policy' govern further behaviour, as normal.
-
-`Exit Policy'
- An entry may, optionally, specify an alternative `Exit Policy' to
- take if the entry matched, rather than the normal policy of
- exiting the route-map and permitting the route. The two
- possibilities are:
-
- - `next': Continue on with processing of the route-map entries.
-
- - `goto N': Jump ahead to the first route-map entry whose order
- in the route-map is >= N. Jumping to a previous entry is not
- permitted.
-
- The default action of a route-map, if no entries match, is to deny.
-I.e. a route-map essentially has as its last entry an empty `deny'
-entry, which matches all routes. To change this behaviour, one must
-specify an empty `permit' entry as the last entry in the route-map.
-
- To summarise the above:
-
- Match No Match
------------------------------
-_Permit_ action cont
-_Deny_ deny cont
-
-`action'
- - Apply _set_ statements
-
- - If _call_ is present, call given route-map. If that returns a
- `deny', finish processing and return `deny'.
-
- - If `Exit Policy' is _next_, goto next route-map entry
-
- - If `Exit Policy' is _goto_, goto first entry whose order in
- the list is >= the given order.
-
- - Finish processing the route-map and permit the route.
-
-`deny'
- - The route is denied by the route-map (return `deny').
-
-`cont'
- - goto next route-map entry
-
-
-File: quagga.info, Node: Route Map Command, Next: Route Map Match Command, Up: Route Map
-
-13.1 Route Map Command
-======================
-
- -- Command: route-map ROUTE-MAP-NAME (permit|deny) ORDER
- Configure the ORDER'th entry in ROUTE-MAP-NAME with `Match Policy'
- of either _permit_ or _deny_.
-
-
-
-File: quagga.info, Node: Route Map Match Command, Next: Route Map Set Command, Prev: Route Map Command, Up: Route Map
-
-13.2 Route Map Match Command
-============================
-
- -- Route-map Command: match ip address ACCESS_LIST
- Matches the specified ACCESS_LIST
-
- -- Route-map Command: match ip next-hop IPV4_ADDR
- Matches the specified IPV4_ADDR.
-
- -- Route-map Command: match aspath AS_PATH
- Matches the specified AS_PATH.
-
- -- Route-map Command: match metric METRIC
- Matches the specified METRIC.
-
- -- Route-map Command: match community COMMUNITY_LIST
- Matches the specified COMMUNITY_LIST
-
-
-File: quagga.info, Node: Route Map Set Command, Next: Route Map Call Command, Prev: Route Map Match Command, Up: Route Map
-
-13.3 Route Map Set Command
-==========================
-
- -- Route-map Command: set ip next-hop IPV4_ADDRESS
- Set the BGP nexthop address.
-
- -- Route-map Command: set local-preference LOCAL_PREF
- Set the BGP local preference.
-
- -- Route-map Command: set weight WEIGHT
- Set the route's weight.
-
- -- Route-map Command: set metric METRIC
- Set the BGP attribute MED.
-
- -- Route-map Command: set as-path prepend AS_PATH
- Set the BGP AS path to prepend.
-
- -- Route-map Command: set community COMMUNITY
- Set the BGP community attribute.
-
- -- Route-map Command: set ipv6 next-hop global IPV6_ADDRESS
- Set the BGP-4+ global IPv6 nexthop address.
-
- -- Route-map Command: set ipv6 next-hop local IPV6_ADDRESS
- Set the BGP-4+ link local IPv6 nexthop address.
-
-
-File: quagga.info, Node: Route Map Call Command, Next: Route Map Exit Action Command, Prev: Route Map Set Command, Up: Route Map
-
-13.4 Route Map Call Command
-===========================
-
- -- Route-map Command: call NAME
- Call route-map NAME. If it returns deny, deny the route and finish
- processing the route-map.
-
-
-File: quagga.info, Node: Route Map Exit Action Command, Next: Route Map Examples, Prev: Route Map Call Command, Up: Route Map
-
-13.5 Route Map Exit Action Command
-==================================
-
- -- Route-map Command: on-match next
- -- Route-map Command: continue
- Proceed on to the next entry in the route-map.
-
- -- Route-map Command: on-match goto N
- -- Route-map Command: continue N
- Proceed processing the route-map at the first entry whose order is
- >= N
-
-
-File: quagga.info, Node: Route Map Examples, Prev: Route Map Exit Action Command, Up: Route Map
-
-13.6 Route Map Examples
-=======================
-
-A simple example of a route-map:
-
- route-map test permit 10
- match ip address 10
- set local-preference 200
-
- This means that if a route matches ip access-list number 10 it's
-local-preference value is set to 200.
-
- See *Note BGP Configuration Examples:: for examples of more
-sophisticated useage of route-maps, including of the `call' action.
-
-
-File: quagga.info, Node: IPv6 Support, Next: Kernel Interface, Prev: Route Map, Up: Top
-
-14 IPv6 Support
-***************
-
-Quagga fully supports IPv6 routing. As described so far, Quagga
-supports RIPng, OSPFv3 and BGP-4+. You can give IPv6 addresses to an
-interface and configure static IPv6 routing information. Quagga IPv6
-also provides automatic address configuration via a feature called
-`address auto configuration'. To do it, the router must send router
-advertisement messages to the all nodes that exist on the network.
-
-* Menu:
-
-* Router Advertisement::
-
-
-File: quagga.info, Node: Router Advertisement, Up: IPv6 Support
-
-14.1 Router Advertisement
-=========================
-
- -- Interface Command: no ipv6 nd suppress-ra
- Send router advertisment messages.
-
- -- Interface Command: ipv6 nd suppress-ra
- Don't send router advertisment messages.
-
- -- Interface Command: ipv6 nd prefix IPV6PREFIX [VALID-LIFETIME]
-[PREFERRED-LIFETIME] [off-link] [no-autoconfig] [router-address]
- Configuring the IPv6 prefix to include in router advertisements.
- Several prefix specific optional parameters and flags may follow:
- * VALID-LIFETIME - the length of time in seconds during what
- the prefix is valid for the purpose of on-link determination.
- Value INFINITE represents infinity (i.e. a value of all one
- bits (`0xffffffff')).
-
- Range: `<0-4294967295>' Default: `2592000'
-
- * PREFERRED-LIFETIME - the length of time in seconds during
- what addresses generated from the prefix remain preferred.
- Value INFINITE represents infinity.
-
- Range: `<0-4294967295>' Default: `604800'
-
- * OFF-LINK - indicates that advertisement makes no statement
- about on-link or off-link properties of the prefix.
-
- Default: not set, i.e. this prefix can be used for on-link
- determination.
-
- * NO-AUTOCONFIG - indicates to hosts on the local link that the
- specified prefix cannot be used for IPv6 autoconfiguration.
-
- Default: not set, i.e. prefix can be used for
- autoconfiguration.
-
- * ROUTER-ADDRESS - indicates to hosts on the local link that
- the specified prefix contains a complete IP address by
- setting R flag.
-
- Default: not set, i.e. hosts do not assume a complete IP
- address is placed.
-
- -- Interface Command: ipv6 nd ra-interval SECONDS
- -- Interface Command: no ipv6 nd ra-interval
- The maximum time allowed between sending unsolicited multicast
- router advertisements from the interface, in seconds. Must be no
- less than 3 seconds.
-
- Default: `600'
-
- -- Interface Command: ipv6 nd ra-interval msec MILLISECONDS
- -- Interface Command: no ipv6 nd ra-interval msec
- The maximum time allowed between sending unsolicited multicast
- router advertisements from the interface, in milliseconds. Must be
- no less than 30 milliseconds.
-
- Default: `600000'
-
- -- Interface Command: ipv6 nd ra-lifetime SECONDS
- -- Interface Command: no ipv6 nd ra-lifetime
- The value to be placed in the Router Lifetime field of router
- advertisements sent from the interface, in seconds. Indicates the
- usefulness of the router as a default router on this interface.
- Setting the value to zero indicates that the router should not be
- considered a default router on this interface. Must be either
- zero or between value specified with IPV6 ND RA-INTERVAL (or
- default) and 9000 seconds.
-
- Default: `1800'
-
- -- Interface Command: ipv6 nd reachable-time MILLISECONDS
- -- Interface Command: no ipv6 nd reachable-time
- The value to be placed in the Reachable Time field in the Router
- Advertisement messages sent by the router, in milliseconds. The
- configured time enables the router to detect unavailable
- neighbors. The value zero means unspecified (by this router). Must
- be no greater than `3,600,000' milliseconds (1 hour).
-
- Default: `0'
-
- -- Interface Command: ipv6 nd managed-config-flag
- -- Interface Command: no ipv6 nd managed-config-flag
- Set/unset flag in IPv6 router advertisements which indicates to
- hosts that they should use managed (stateful) protocol for
- addresses autoconfiguration in addition to any addresses
- autoconfigured using stateless address autoconfiguration.
-
- Default: not set
-
- -- Interface Command: ipv6 nd other-config-flag
- -- Interface Command: no ipv6 nd other-config-flag
- Set/unset flag in IPv6 router advertisements which indicates to
- hosts that they should use administered (stateful) protocol to
- obtain autoconfiguration information other than addresses.
-
- Default: not set
-
- -- Interface Command: ipv6 nd home-agent-config-flag
- -- Interface Command: no ipv6 nd home-agent-config-flag
- Set/unset flag in IPv6 router advertisements which indicates to
- hosts that the router acts as a Home Agent and includes a Home
- Agent Option.
-
- Default: not set
-
- -- Interface Command: ipv6 nd home-agent-preference
- -- Interface Command: no ipv6 nd home-agent-preference
- The value to be placed in Home Agent Option, when Home Agent
- config flag is set, which indicates to hosts Home Agent preference.
-
- Default: 0
-
- -- Interface Command: ipv6 nd home-agent-lifetime
- -- Interface Command: no ipv6 nd home-agent-lifetime
- The value to be placed in Home Agent Option, when Home Agent
- config flag is set, which indicates to hosts Home Agent Lifetime.
- A value of 0 means to place Router Lifetime value.
-
- Default: 0
-
- -- Interface Command: ipv6 nd adv-interval-option
- -- Interface Command: no ipv6 nd adv-interval-option
- Include an Advertisement Interval option which indicates to hosts
- the maximum time, in milliseconds, between successive unsolicited
- Router Advertisements.
-
- Default: not set
-
- interface eth0
- no ipv6 nd suppress-ra
- ipv6 nd prefix 2001:0DB8:5009::/64
-
- For more information see `RFC2462 (IPv6 Stateless Address
-Autoconfiguration)' , `RFC2461 (Neighbor Discovery for IP Version 6
-(IPv6))' and `RFC3775 (Mobility Support in IPv6 (Mobile IPv6))'.
-
-
-File: quagga.info, Node: Kernel Interface, Next: SNMP Support, Prev: IPv6 Support, Up: Top
-
-15 Kernel Interface
-*******************
-
-There are several different methods for reading kernel routing table
-information, updating kernel routing tables, and for looking up
-interfaces.
-
-`ioctl'
- The `ioctl' method is a very traditional way for reading or writing
- kernel information. `ioctl' can be used for looking up interfaces
- and for modifying interface addresses, flags, mtu settings and
- other types of information. Also, `ioctl' can insert and delete
- kernel routing table entries. It will soon be available on almost
- any platform which zebra supports, but it is a little bit ugly
- thus far, so if a better method is supported by the kernel, zebra
- will use that.
-
-`sysctl'
- `sysctl' can lookup kernel information using MIB (Management
- Information Base) syntax. Normally, it only provides a way of
- getting information from the kernel. So one would usually want to
- change kernel information using another method such as `ioctl'.
-
-`proc filesystem'
- `proc filesystem' provides an easy way of getting kernel
- information.
-
-`routing socket'
-
-`netlink'
- On recent Linux kernels (2.0.x and 2.2.x), there is a kernel/user
- communication support called `netlink'. It makes asynchronous
- communication between kernel and Quagga possible, similar to a
- routing socket on BSD systems.
-
- Before you use this feature, be sure to select (in kernel
- configuration) the kernel/netlink support option 'Kernel/User
- network link driver' and 'Routing messages'.
-
- Today, the /dev/route special device file is obsolete. Netlink
- communication is done by reading/writing over netlink socket.
-
- After the kernel configuration, please reconfigure and rebuild
- Quagga. You can use netlink as a dynamic routing update channel
- between Quagga and the kernel.
-
-
-File: quagga.info, Node: SNMP Support, Next: Zebra Protocol, Prev: Kernel Interface, Up: Top
-
-16 SNMP Support
-***************
-
-SNMP (Simple Network Managing Protocol) is a widely implemented feature
-for collecting network information from router and/or host. Quagga
-itself does not support SNMP agent (server daemon) functionality but is
-able to connect to a SNMP agent using the SMUX protocol (`RFC1227') and
-make the routing protocol MIBs available through it.
-
-* Menu:
-
-* Getting and installing an SNMP agent::
-* SMUX configuration::
-* MIB and command reference::
-* Handling SNMP Traps::
-
-
-File: quagga.info, Node: Getting and installing an SNMP agent, Next: SMUX configuration, Up: SNMP Support
-
-16.1 Getting and installing an SNMP agent
-=========================================
-
-There are several SNMP agent which support SMUX. We recommend to use
-the latest version of `net-snmp' which was formerly known as `ucd-snmp'.
-It is free and open software and available at `http://www.net-snmp.org/'
-and as binary package for most Linux distributions. `net-snmp' has to
-be compiled with `--with-mib-modules=smux' to be able to accept
-connections from Quagga.
-
-
-File: quagga.info, Node: SMUX configuration, Next: MIB and command reference, Prev: Getting and installing an SNMP agent, Up: SNMP Support
-
-16.2 SMUX configuration
-=======================
-
-To enable SMUX protocol support, Quagga must have been build with the
-`--enable-snmp' option.
-
- A separate connection has then to be established between between the
-SNMP agent (snmpd) and each of the Quagga daemons. This connections
-each use different OID numbers and passwords. Be aware that this OID
-number is not the one that is used in queries by clients, it is solely
-used for the intercommunication of the daemons.
-
- In the following example the ospfd daemon will be connected to the
-snmpd daemon using the password "quagga_ospfd". For testing it is
-recommending to take exactly the below snmpd.conf as wrong access
-restrictions can be hard to debug.
-
- /etc/snmp/snmpd.conf:
- #
- # example access restrictions setup
- #
- com2sec readonly default public
- group MyROGroup v1 readonly
- view all included .1 80
- access MyROGroup "" any noauth exact all none none
- #
- # the following line is relevant for Quagga
- #
- smuxpeer .1.3.6.1.4.1.3317.1.2.5 quagga_ospfd
-
- /etc/quagga/ospf:
- ! ... the rest of ospfd.conf has been omitted for clarity ...
- !
- smux peer .1.3.6.1.4.1.3317.1.2.5 quagga_ospfd
- !
-
- After restarting snmpd and quagga, a successful connection can be
-verified in the syslog and by querying the SNMP daemon:
-
- snmpd[12300]: [smux_accept] accepted fd 12 from 127.0.0.1:36255
- snmpd[12300]: accepted smux peer: \
- oid GNOME-PRODUCT-ZEBRA-MIB::ospfd, quagga-0.96.5
-
- # snmpwalk -c public -v1 localhost .1.3.6.1.2.1.14.1.1
- OSPF-MIB::ospfRouterId.0 = IpAddress: 192.168.42.109
-
- Be warned that the current version (5.1.1) of the Net-SNMP daemon
-writes a line for every SNMP connect to the syslog which can lead to
-enormous log file sizes. If that is a problem you should consider to
-patch snmpd and comment out the troublesome `snmp_log()' line in the
-function `netsnmp_agent_check_packet()' in `agent/snmp_agent.c'.
-
-
-File: quagga.info, Node: MIB and command reference, Next: Handling SNMP Traps, Prev: SMUX configuration, Up: SNMP Support
-
-16.3 MIB and command reference
-==============================
-
-The following OID numbers are used for the interprocess communication
-of snmpd and the Quagga daemons. Sadly, SNMP has not been implemented
-in all daemons yet.
- (OIDs below .iso.org.dod.internet.private.enterprises)
- zebra .1.3.6.1.4.1.3317.1.2.1 .gnome.gnomeProducts.zebra.zserv
- bgpd .1.3.6.1.4.1.3317.1.2.2 .gnome.gnomeProducts.zebra.bgpd
- ripd .1.3.6.1.4.1.3317.1.2.3 .gnome.gnomeProducts.zebra.ripd
- ospfd .1.3.6.1.4.1.3317.1.2.5 .gnome.gnomeProducts.zebra.ospfd
- ospf6d .1.3.6.1.4.1.3317.1.2.6 .gnome.gnomeProducts.zebra.ospf6d
-
- The following OID numbers are used for querying the SNMP daemon by a
-client:
- zebra .1.3.6.1.2.1.4.24 .iso.org.dot.internet.mgmt.mib-2.ip.ipForward
- ospfd .1.3.6.1.2.1.14 .iso.org.dot.internet.mgmt.mib-2.ospf
- bgpd .1.3.6.1.2.1.15 .iso.org.dot.internet.mgmt.mib-2.bgp
- ripd .1.3.6.1.2.1.23 .iso.org.dot.internet.mgmt.mib-2.rip2
- ospf6d .1.3.6.1.3.102 .iso.org.dod.internet.experimental.ospfv3
-
- The following syntax is understood by the Quagga daemons for
-configuring SNMP:
-
- -- Command: smux peer OID
- -- Command: no smux peer OID
-
- -- Command: smux peer OID PASSWORD
- -- Command: no smux peer OID PASSWORD
-
-
-File: quagga.info, Node: Handling SNMP Traps, Prev: MIB and command reference, Up: SNMP Support
-
-16.4 Handling SNMP Traps
-========================
-
-To handle snmp traps make sure your snmp setup of quagga works
-correctly as described in the quagga documentation in *Note SNMP
-Support::.
-
- The BGP4 mib will send traps on peer up/down events. These should be
-visible in your snmp logs with a message similar to:
-
- `snmpd[13733]: Got trap from peer on fd 14'
-
- To react on these traps they should be handled by a trapsink.
-Configure your trapsink by adding the following lines to
-`/etc/snmpd/snmpd.conf':
-
- # send traps to the snmptrapd on localhost
- trapsink localhost
-
- This will send all traps to an snmptrapd running on localhost. You
-can of course also use a dedicated management station to catch traps.
-Configure the snmptrapd daemon by adding the following line to
-`/etc/snmpd/snmptrapd.conf':
-
- traphandle .1.3.6.1.4.1.3317.1.2.2 /etc/snmp/snmptrap_handle.sh
-
- This will use the bash script `/etc/snmp/snmptrap_handle.sh' to
-handle the BGP4 traps. To add traps for other protocol daemons, lookup
-their appropriate OID from their mib. (For additional information about
-which traps are supported by your mib, lookup the mib on
-`http://www.oidview.com/mibs/detail.html').
-
- Make sure snmptrapd is started.
-
- The snmptrap_handle.sh script I personally use for handling BGP4
-traps is below. You can of course do all sorts of things when handling
-traps, like sound a siren, have your display flash, etc., be creative
-;).
-
-
- #!/bin/bash
-
- # routers name
- ROUTER=`hostname -s`
-
- #email address use to sent out notification
- EMAILADDR="john@doe.com"
- #email address used (allongside above) where warnings should be sent
- EMAILADDR_WARN="sms-john@doe.com"
-
- # type of notification
- TYPE="Notice"
-
- # local snmp community for getting AS belonging to peer
- COMMUNITY="<community>"
-
- # if a peer address is in $WARN_PEERS a warning should be sent
- WARN_PEERS="192.0.2.1"
-
-
- # get stdin
- INPUT=`cat -`
-
- # get some vars from stdin
- uptime=`echo $INPUT | cut -d' ' -f5`
- peer=`echo $INPUT | cut -d' ' -f8 | sed -e 's/SNMPv2-SMI::mib-2.15.3.1.14.//g'`
- peerstate=`echo $INPUT | cut -d' ' -f13`
- errorcode=`echo $INPUT | cut -d' ' -f9 | sed -e 's/\"//g'`
- suberrorcode=`echo $INPUT | cut -d' ' -f10 | sed -e 's/\"//g'`
- remoteas=`snmpget -v2c -c $COMMUNITY localhost SNMPv2-SMI::mib-2.15.3.1.9.$peer | cut -d' ' -f4`
-
- WHOISINFO=`whois -h whois.ripe.net " -r AS$remoteas" | egrep '(as-name|descr)'`
- asname=`echo "$WHOISINFO" | grep "^as-name:" | sed -e 's/^as-name://g' -e 's/ //g' -e 's/^ //g' | uniq`
- asdescr=`echo "$WHOISINFO" | grep "^descr:" | sed -e 's/^descr://g' -e 's/ //g' -e 's/^ //g' | uniq`
-
- # if peer address is in $WARN_PEER, the email should also
- # be sent to $EMAILADDR_WARN
- for ip in $WARN_PEERS; do
- if [ "x$ip" == "x$peer" ]; then
- EMAILADDR="$EMAILADDR,$EMAILADDR_WARN"
- TYPE="WARNING"
- break
- fi
- done
-
-
- # convert peer state
- case "$peerstate" in
- 1) peerstate="Idle" ;;
- 2) peerstate="Connect" ;;
- 3) peerstate="Active" ;;
- 4) peerstate="Opensent" ;;
- 5) peerstate="Openconfirm" ;;
- 6) peerstate="Established" ;;
- *) peerstate="Unknown" ;;
- esac
-
- # get textual messages for errors
- case "$errorcode" in
- 00)
- error="No error"
- suberror=""
- ;;
- 01)
- error="Message Header Error"
- case "$suberrorcode" in
- 01) suberror="Connection Not Synchronized" ;;
- 02) suberror="Bad Message Length" ;;
- 03) suberror="Bad Message Type" ;;
- *) suberror="Unknown" ;;
- esac
- ;;
- 02)
- error="OPEN Message Error"
- case "$suberrorcode" in
- 01) suberror="Unsupported Version Number" ;;
- 02) suberror="Bad Peer AS" ;;
- 03) suberror="Bad BGP Identifier" ;;
- 04) suberror="Unsupported Optional Parameter" ;;
- 05) suberror="Authentication Failure" ;;
- 06) suberror="Unacceptable Hold Time" ;;
- *) suberror="Unknown" ;;
- esac
- ;;
- 03)
- error="UPDATE Message Error"
- case "$suberrorcode" in
- 01) suberror="Malformed Attribute List" ;;
- 02) suberror="Unrecognized Well-known Attribute" ;;
- 03) suberror="Missing Well-known Attribute" ;;
- 04) suberror="Attribute Flags Error" ;;
- 05) suberror="Attribute Length Error" ;;
- 06) suberror="Invalid ORIGIN Attribute" ;;
- 07) suberror="AS Routing Loop" ;;
- 08) suberror="Invalid NEXT_HOP Attribute" ;;
- 09) suberror="Optional Attribute Error" ;;
- 10) suberror="Invalid Network Field" ;;
- 11) suberror="Malformed AS_PATH" ;;
- *) suberror="Unknown" ;;
- esac
- ;;
- 04)
- error="Hold Timer Expired"
- suberror=""
- ;;
- 05)
- error="Finite State Machine Error"
- suberror=""
- ;;
- 06)
- error="Cease"
- case "$suberrorcode" in
- 01) suberror="Maximum Number of Prefixes Reached" ;;
- 02) suberror="Administratively Shutdown" ;;
- 03) suberror="Peer Unconfigured" ;;
- 04) suberror="Administratively Reset" ;;
- 05) suberror="Connection Rejected" ;;
- 06) suberror="Other Configuration Change" ;;
- 07) suberror="Connection collision resolution" ;;
- 08) suberror="Out of Resource" ;;
- 09) suberror="MAX" ;;
- *) suberror="Unknown" ;;
- esac
- ;;
- *)
- error="Unknown"
- suberror=""
- ;;
- esac
-
- # create textual message from errorcodes
- if [ "x$suberror" == "x" ]; then
- NOTIFY="$errorcode ($error)"
- else
- NOTIFY="$errorcode/$suberrorcode ($error/$suberror)"
- fi
-
-
- # form a decent subject
- SUBJECT="$TYPE: $ROUTER [bgp] $peer is $peerstate: $NOTIFY"
- # create the email body
- MAIL=`cat << EOF
- BGP notification on router $ROUTER.
-
- Peer: $peer
- AS: $remoteas
- New state: $peerstate
- Notification: $NOTIFY
-
- Info:
- $asname
- $asdescr
-
- Snmpd uptime: $uptime
- EOF`
-
- # mail the notification
- echo "$MAIL" | mail -s "$SUBJECT" $EMAILADDR
-
-
-File: quagga.info, Node: Zebra Protocol, Next: Packet Binary Dump Format, Prev: SNMP Support, Up: Top
-
-Appendix A Zebra Protocol
-*************************
-
-A.1 Overview of the Zebra Protocol
-==================================
-
-Zebra Protocol is used by protocol daemons to communicate with the
-zebra daemon.
-
- Each protocol daemon may request and send information to and from the
-zebra daemon such as interface states, routing state,
-nexthop-validation, and so on. Protocol daemons may also install routes
-with zebra. The zebra daemon manages which route is installed into the
-forwarding table with the kernel.
-
- Zebra Protocol is a streaming protocol, with a common header. Two
-versions of the header are in use. Version 0 is implicitely versioned.
-Version 1 has an explicit version field. Version 0 can be distinguished
-from all other versions by examining the 3rd byte of the header, which
-contains a marker value for all versions bar version 0. The marker byte
-corresponds to the command field in version 0, and the marker value is
-a reserved command in version 0.
-
- We do not anticipate there will be further versions of the header for
-the foreseeable future, as the command field in version 1 is wide
-enough to allow for future extensions to done compatibly through
-seperate commands.
-
- Version 0 is used by all versions of GNU Zebra as of this writing,
-and versions of Quagga up to and including Quagga 0.98. Version 1 will
-be used as of Quagga 1.0.
-
-A.2 Zebra Protocol Definition
-=============================
-
-A.2.1 Zebra Protocol Header (version 0)
----------------------------------------
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-------------------------------+---------------+
- | Length (2) | Command (1) |
- +-------------------------------+---------------+
-
-A.2.2 Zebra Protocol Common Header (version 1)
-----------------------------------------------
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-------------------------------+---------------+-------------+
- | Length (2) | Marker (1) | Version (1) |
- +-------------------------------+---------------+-------------+
- | Command (2) |
- +-------------------------------+
-
-A.2.3 Zebra Protocol Header Field Definitions
----------------------------------------------
-
-`Length'
- Total packet length including this header. The minimum length is 3
- bytes for version 0 messages and 6 bytes for version 1 messages.
-
-`Marker'
- Static marker with a value of 255 always. This is to allow version
- 0 Zserv headers (which do not include version explicitely) to be
- distinguished from versioned headers. Not present in version 0
- messages.
-
-`Version'
- Version number of the Zserv message. Clients should not continue
- processing messages past the version field for versions they do not
- recognise. Not present in version 0 messages.
-
-`Command'
- The Zebra Protocol command.
-
-A.2.4 Zebra Protocol Commands
------------------------------
-
-Command Value
------------------------------------------------------
-ZEBRA_INTERFACE_ADD 1
-ZEBRA_INTERFACE_DELETE 2
-ZEBRA_INTERFACE_ADDRESS_ADD 3
-ZEBRA_INTERFACE_ADDRESS_DELETE 4
-ZEBRA_INTERFACE_UP 5
-ZEBRA_INTERFACE_DOWN 6
-ZEBRA_IPV4_ROUTE_ADD 7
-ZEBRA_IPV4_ROUTE_DELETE 8
-ZEBRA_IPV6_ROUTE_ADD 9
-ZEBRA_IPV6_ROUTE_DELETE 10
-ZEBRA_REDISTRIBUTE_ADD 11
-ZEBRA_REDISTRIBUTE_DELETE 12
-ZEBRA_REDISTRIBUTE_DEFAULT_ADD 13
-ZEBRA_REDISTRIBUTE_DEFAULT_DELETE 14
-ZEBRA_IPV4_NEXTHOP_LOOKUP 15
-ZEBRA_IPV6_NEXTHOP_LOOKUP 16
-
-
-File: quagga.info, Node: Packet Binary Dump Format, Next: Command Index, Prev: Zebra Protocol, Up: Top
-
-Appendix B Packet Binary Dump Format
-************************************
-
-Quagga can dump routing protocol packet into file with a binary format
-(*note Dump BGP packets and table::).
-
- It seems to be better that we share the MRT's header format for
-backward compatibility with MRT's dump logs. We should also define the
-binary format excluding the header, because we must support both IP v4
-and v6 addresses as socket addresses and / or routing entries.
-
- In the last meeting, we discussed to have a version field in the
-header. But Masaki told us that we can define new `type' value rather
-than having a `version' field, and it seems to be better because we
-don't need to change header format.
-
- Here is the common header format. This is same as that of MRT.
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Time |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Type | Subtype |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Length |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- If `type' is PROTOCOL_BGP4MP, `subtype' is BGP4MP_STATE_CHANGE, and
-Address Family == IP (version 4)
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source AS number | Destination AS number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Interface Index | Address Family |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Old State | New State |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Where State is the value defined in RFC1771.
-
- If `type' is PROTOCOL_BGP4MP, `subtype' is BGP4MP_STATE_CHANGE, and
-Address Family == IP version 6
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source AS number | Destination AS number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Interface Index | Address Family |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Old State | New State |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- If `type' is PROTOCOL_BGP4MP, `subtype' is BGP4MP_MESSAGE, and
-Address Family == IP (version 4)
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source AS number | Destination AS number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Interface Index | Address Family |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | BGP Message Packet |
- | |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- Where BGP Message Packet is the whole contents of the BGP4 message
-including header portion.
-
- If `type' is PROTOCOL_BGP4MP, `subtype' is BGP4MP_MESSAGE, and
-Address Family == IP version 6
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source AS number | Destination AS number |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Interface Index | Address Family |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Source IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Destination IP address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | BGP Message Packet |
- | |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- If `type' is PROTOCOL_BGP4MP, `subtype' is BGP4MP_ENTRY, and Address
-Family == IP (version 4)
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | View # | Status |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Time Last Change |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Address Family | SAFI | Next-Hop-Len |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Next Hop Address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Prefix Length | Address Prefix [variable] |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Attribute Length |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | BGP Attribute [variable length] |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- If `type' is PROTOCOL_BGP4MP, `subtype' is BGP4MP_ENTRY, and Address
-Family == IP version 6
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | View # | Status |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Time Last Change |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Address Family | SAFI | Next-Hop-Len |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Next Hop Address |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Next Hop Address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Next Hop Address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Next Hop Address (Cont'd) |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Prefix Length | Address Prefix [variable] |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Address Prefix (cont'd) [variable] |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | Attribute Length |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | BGP Attribute [variable length] |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- BGP4 Attribute must not contain MP_UNREACH_NLRI. If BGP Attribute
-has MP_REACH_NLRI field, it must has zero length NLRI, e.g.,
-MP_REACH_NLRI has only Address Family, SAFI and next-hop values.
-
- If `type' is PROTOCOL_BGP4MP and `subtype' is BGP4MP_SNAPSHOT,
-
- 0 1 2 3
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
- | View # | File Name [variable] |
- +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
- The file specified in "File Name" contains all routing entries,
-which are in the format of "subtype == BGP4MP_ENTRY".
-
- Constants:
- /* type value */
- #define MSG_PROTOCOL_BGP4MP 16
- /* subtype value */
- #define BGP4MP_STATE_CHANGE 0
- #define BGP4MP_MESSAGE 1
- #define BGP4MP_ENTRY 2
- #define BGP4MP_SNAPSHOT 3
-
-
-File: quagga.info, Node: Command Index, Next: VTY Key Index, Prev: Packet Binary Dump Format, Up: Top
-
-Command Index
-*************
-
-
-* Menu:
-
-* access-class ACCESS-LIST: Basic Config Commands.
- (line 128)
-* access-list NAME deny IPV4-NETWORK: IP Access List. (line 8)
-* access-list NAME permit IPV4-NETWORK: IP Access List. (line 7)
-* aggregate-address A.B.C.D/M: Route Aggregation. (line 7)
-* aggregate-address A.B.C.D/M as-set: Route Aggregation. (line 10)
-* aggregate-address A.B.C.D/M summary-only: Route Aggregation.
- (line 14)
-* area <0-4294967295> authentication: OSPF area. (line 127)
-* area <0-4294967295> authentication message-digest: OSPF area.
- (line 134)
-* area <0-4294967295> export-list NAME: OSPF area. (line 85)
-* area <0-4294967295> filter-list prefix NAME in: OSPF area. (line 117)
-* area <0-4294967295> filter-list prefix NAME out: OSPF area. (line 118)
-* area <0-4294967295> import-list NAME: OSPF area. (line 109)
-* area <0-4294967295> range A.B.C.D/M: OSPF area. (line 8)
-* area <0-4294967295> shortcut: OSPF area. (line 55)
-* area <0-4294967295> stub: OSPF area. (line 62)
-* area <0-4294967295> stub no-summary: OSPF area. (line 74)
-* area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 50)
-* area A.B.C.D authentication: OSPF area. (line 126)
-* area A.B.C.D authentication message-digest: OSPF area. (line 133)
-* area A.B.C.D default-cost <0-16777215>: OSPF area. (line 80)
-* area A.B.C.D export-list NAME: OSPF area. (line 84)
-* area A.B.C.D filter-list prefix NAME in: OSPF area. (line 115)
-* area A.B.C.D filter-list prefix NAME out: OSPF area. (line 116)
-* area A.B.C.D import-list NAME: OSPF area. (line 108)
-* area A.B.C.D range A.B.C.D/M: OSPF area. (line 7)
-* area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 28)
-* area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
- (line 34)
-* area A.B.C.D shortcut: OSPF area. (line 54)
-* area A.B.C.D stub: OSPF area. (line 61)
-* area A.B.C.D stub no-summary: OSPF area. (line 73)
-* area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 49)
-* auto-cost reference-bandwidth <1-4294967>: OSPF router. (line 143)
-* bandwidth <1-10000000>: Interface Commands. (line 31)
-* banner motd default: Basic Config Commands.
- (line 110)
-* bgp bestpath as-path confed: BGP decision process.
- (line 19)
-* bgp cluster-id A.B.C.D: Route Reflector. (line 7)
-* bgp config-type cisco: Multiple instance. (line 20)
-* bgp config-type zebra: Multiple instance. (line 53)
-* bgp multiple-instance: Multiple instance. (line 10)
-* bgp router-id A.B.C.D: BGP router. (line 22)
-* call NAME: Route Map Call Command.
- (line 7)
-* call WORD: Commands for configuring a Route Server.
- (line 52)
-* clear ip bgp PEER: More Show IP BGP. (line 25)
-* clear ip bgp PEER soft in: More Show IP BGP. (line 28)
-* clear ip prefix-list: Clear counter of ip prefix-list.
- (line 7)
-* clear ip prefix-list NAME: Clear counter of ip prefix-list.
- (line 11)
-* clear ip prefix-list NAME A.B.C.D/M: Clear counter of ip prefix-list.
- (line 13)
-* configure terminal: Terminal Mode Commands.
- (line 13)
-* continue: Route Map Exit Action Command.
- (line 8)
-* continue N: Route Map Exit Action Command.
- (line 12)
-* debug event: More Show IP BGP. (line 33)
-* debug keepalive: More Show IP BGP. (line 37)
-* debug ospf ism: Debugging OSPF. (line 12)
-* debug ospf ism (status|events|timers): Debugging OSPF. (line 13)
-* debug ospf lsa: Debugging OSPF. (line 22)
-* debug ospf lsa (generate|flooding|refresh): Debugging OSPF. (line 23)
-* debug ospf nsm: Debugging OSPF. (line 17)
-* debug ospf nsm (status|events|timers): Debugging OSPF. (line 18)
-* debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
- (line 8)
-* debug ospf zebra: Debugging OSPF. (line 27)
-* debug ospf zebra (interface|redistribute): Debugging OSPF. (line 28)
-* debug rip events: RIP Debug Commands. (line 9)
-* debug rip packet: RIP Debug Commands. (line 15)
-* debug rip zebra: RIP Debug Commands. (line 22)
-* debug ripng events: ripngd Terminal Mode Commands.
- (line 11)
-* debug ripng packet: ripngd Terminal Mode Commands.
- (line 13)
-* debug ripng zebra: ripngd Terminal Mode Commands.
- (line 15)
-* debug update: More Show IP BGP. (line 35)
-* default-information originate <1>: Redistribute routes to OSPF.
- (line 27)
-* default-information originate: How to Announce RIP route.
- (line 51)
-* default-information originate always: Redistribute routes to OSPF.
- (line 33)
-* default-information originate always metric <0-16777214>: Redistribute routes to OSPF.
- (line 35)
-* default-information originate always metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
- (line 37)
-* default-information originate always metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
- (line 39)
-* default-information originate metric <0-16777214>: Redistribute routes to OSPF.
- (line 28)
-* default-information originate metric <0-16777214> metric-type (1|2): Redistribute routes to OSPF.
- (line 30)
-* default-information originate metric <0-16777214> metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
- (line 32)
-* default-metric <0-16777214>: Redistribute routes to OSPF.
- (line 52)
-* default-metric <1-16>: RIP Metric Manipulation.
- (line 11)
-* description DESCRIPTION ...: Interface Commands. (line 24)
-* distance <1-255> <1>: Redistribute routes to OSPF.
- (line 55)
-* distance <1-255>: RIP distance. (line 9)
-* distance <1-255> A.B.C.D/M <1>: BGP distance. (line 12)
-* distance <1-255> A.B.C.D/M: RIP distance. (line 13)
-* distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 18)
-* distance <1-255> A.B.C.D/M WORD: BGP distance. (line 13)
-* distance bgp <1-255> <1-255> <1-255>: BGP distance. (line 7)
-* distance ospf (intra-area|inter-area|external) <1-255>: Redistribute routes to OSPF.
- (line 59)
-* distribute-list ACCESS_LIST (in|out) IFNAME: ripngd Filtering Commands.
- (line 7)
-* distribute-list ACCESS_LIST DIRECT IFNAME: Filtering RIP Routes.
- (line 9)
-* distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
- (line 48)
-* distribute-list prefix PREFIX_LIST (in|out) IFNAME: Filtering RIP Routes.
- (line 32)
-* dump bgp all PATH: Dump BGP packets and table.
- (line 7)
-* dump bgp all PATH INTERVAL: Dump BGP packets and table.
- (line 8)
-* dump bgp routes PATH: Dump BGP packets and table.
- (line 15)
-* dump bgp updates PATH: Dump BGP packets and table.
- (line 11)
-* dump bgp updates PATH INTERVAL: Dump BGP packets and table.
- (line 12)
-* enable password PASSWORD: Basic Config Commands.
- (line 14)
-* exec-timeout MINUTE: Basic Config Commands.
- (line 116)
-* exec-timeout MINUTE SECOND: Basic Config Commands.
- (line 117)
-* flush_timer TIME: ripngd Configuration.
- (line 12)
-* hostname HOSTNAME: Basic Config Commands.
- (line 7)
-* interface IFNAME: Interface Commands. (line 7)
-* interface IFNAME area AREA: OSPF6 router. (line 12)
-* ip address ADDRESS/PREFIX: Interface Commands. (line 13)
-* ip address ADDRESS/PREFIX secondary: Interface Commands. (line 19)
-* ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
- (line 9)
-* ip community-list <1-99> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
- (line 14)
-* ip community-list <100-199> {permit|deny} COMMUNITY: Numbered BGP Community Lists.
- (line 20)
-* ip community-list expanded NAME {permit|deny} LINE: BGP Community Lists.
- (line 30)
-* ip community-list NAME {permit|deny} COMMUNITY: Numbered BGP Community Lists.
- (line 25)
-* ip community-list standard NAME {permit|deny} COMMUNITY: BGP Community Lists.
- (line 20)
-* ip extcommunity-list expanded NAME {permit|deny} LINE: BGP Extended Community Lists.
- (line 21)
-* ip extcommunity-list standard NAME {permit|deny} EXTCOMMUNITY: BGP Extended Community Lists.
- (line 10)
-* ip ospf authentication-key AUTH_KEY: OSPF interface. (line 7)
-* ip ospf cost <1-65535>: OSPF interface. (line 30)
-* ip ospf dead-interval <1-65535>: OSPF interface. (line 35)
-* ip ospf dead-interval minimal hello-multiplier <2-20>: OSPF interface.
- (line 37)
-* ip ospf hello-interval <1-65535>: OSPF interface. (line 54)
-* ip ospf message-digest-key KEYID md5 KEY: OSPF interface. (line 13)
-* ip ospf network (broadcast|non-broadcast|point-to-multipoint|point-to-point): OSPF interface.
- (line 65)
-* ip ospf priority <0-255>: OSPF interface. (line 69)
-* ip ospf retransmit-interval <1-65535>: OSPF interface. (line 76)
-* ip ospf transmit-delay: OSPF interface. (line 82)
-* ip prefix-list NAME (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
- (line 16)
-* ip prefix-list NAME description DESC: ip prefix-list description.
- (line 7)
-* ip prefix-list NAME seq NUMBER (permit|deny) PREFIX [le LEN] [ge LEN]: IP Prefix List.
- (line 18)
-* ip prefix-list sequence-number: ip prefix-list sequential number control.
- (line 7)
-* ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
- (line 43)
-* ip rip authentication mode md5: RIP Authentication. (line 29)
-* ip rip authentication mode text: RIP Authentication. (line 33)
-* ip rip authentication string STRING: RIP Authentication. (line 37)
-* ip rip receive version VERSION: RIP Version Control. (line 44)
-* ip rip send version VERSION: RIP Version Control. (line 33)
-* ip route NETWORK GATEWAY: Static Route Commands.
- (line 10)
-* ip route NETWORK GATEWAY DISTANCE: Static Route Commands.
- (line 36)
-* ip route NETWORK NETMASK GATEWAY: Static Route Commands.
- (line 25)
-* ip split-horizon: RIP Configuration. (line 70)
-* ip6 address ADDRESS/PREFIX: Interface Commands. (line 14)
-* ipv6 nd adv-interval-option: Router Advertisement.
- (line 127)
-* ipv6 nd home-agent-config-flag: Router Advertisement.
- (line 104)
-* ipv6 nd home-agent-lifetime: Router Advertisement.
- (line 119)
-* ipv6 nd home-agent-preference: Router Advertisement.
- (line 112)
-* ipv6 nd managed-config-flag: Router Advertisement.
- (line 87)
-* ipv6 nd other-config-flag: Router Advertisement.
- (line 96)
-* ipv6 nd prefix IPV6PREFIX [VALID-LIFETIME] [PREFERRED-LIFETIME] [off-link] [no-autoconfig] [router-address]: Router Advertisement.
- (line 14)
-* ipv6 nd ra-interval msec MILLISECONDS: Router Advertisement.
- (line 57)
-* ipv6 nd ra-interval SECONDS: Router Advertisement.
- (line 49)
-* ipv6 nd ra-lifetime SECONDS: Router Advertisement.
- (line 65)
-* ipv6 nd reachable-time MILLISECONDS: Router Advertisement.
- (line 77)
-* ipv6 nd suppress-ra: Router Advertisement.
- (line 10)
-* ipv6 ospf6 cost COST: OSPF6 interface. (line 7)
-* ipv6 ospf6 dead-interval DEADINTERVAL: OSPF6 interface. (line 13)
-* ipv6 ospf6 hello-interval HELLOINTERVAL: OSPF6 interface. (line 10)
-* ipv6 ospf6 priority PRIORITY: OSPF6 interface. (line 20)
-* ipv6 ospf6 retransmit-interval RETRANSMITINTERVAL: OSPF6 interface.
- (line 17)
-* ipv6 ospf6 transmit-delay TRANSMITDELAY: OSPF6 interface. (line 23)
-* ipv6 route NETWORK GATEWAY: Static Route Commands.
- (line 77)
-* ipv6 route NETWORK GATEWAY DISTANCE: Static Route Commands.
- (line 78)
-* line vty: Basic Config Commands.
- (line 107)
-* link-detect: Interface Commands. (line 37)
-* list: Terminal Mode Commands.
- (line 24)
-* log facility FACILITY: Basic Config Commands.
- (line 81)
-* log file FILENAME: Basic Config Commands.
- (line 41)
-* log file FILENAME LEVEL: Basic Config Commands.
- (line 42)
-* log monitor: Basic Config Commands.
- (line 68)
-* log monitor LEVEL: Basic Config Commands.
- (line 69)
-* log record-priority: Basic Config Commands.
- (line 87)
-* log stdout: Basic Config Commands.
- (line 28)
-* log stdout LEVEL: Basic Config Commands.
- (line 29)
-* log syslog: Basic Config Commands.
- (line 59)
-* log syslog LEVEL: Basic Config Commands.
- (line 60)
-* log trap LEVEL: Basic Config Commands.
- (line 17)
-* logmsg LEVEL MESSAGE: Terminal Mode Commands.
- (line 34)
-* match as-path WORD: Using AS Path in Route Map.
- (line 7)
-* match aspath AS_PATH: Route Map Match Command.
- (line 13)
-* match community COMMUNITY_LIST: Route Map Match Command.
- (line 19)
-* match community WORD: BGP Community in Route Map.
- (line 13)
-* match community WORD exact-match: BGP Community in Route Map.
- (line 14)
-* match extcommunity WORD: BGP Extended Communities in Route Map.
- (line 7)
-* match interface WORD: RIP route-map. (line 26)
-* match ip address ACCESS_LIST: Route Map Match Command.
- (line 7)
-* match ip address prefix-list WORD: RIP route-map. (line 39)
-* match ip address WORD: RIP route-map. (line 38)
-* match ip next-hop A.B.C.D: RIP route-map. (line 42)
-* match ip next-hop IPV4_ADDR: Route Map Match Command.
- (line 10)
-* match metric <0-4294967295>: RIP route-map. (line 47)
-* match metric METRIC: Route Map Match Command.
- (line 16)
-* match peer {A.B.C.D|X:X::X:X}: Commands for configuring a Route Server.
- (line 34)
-* max-metric router-lsa [on-startup|on-shutdown] <5-86400>: OSPF router.
- (line 110)
-* max-metric router-lsa administrative: OSPF router. (line 111)
-* multicast: Interface Commands. (line 27)
-* neigbor {A.B.C.D|X.X::X.X|peer-group} route-map WORD {import|export}: Commands for configuring a Route Server.
- (line 29)
-* neighbor A.B.C.D: RIP Configuration. (line 34)
-* neighbor A.B.C.D route-server-client: Commands for configuring a Route Server.
- (line 11)
-* neighbor PEER default-originate: BGP Peer commands. (line 47)
-* neighbor PEER description ...: BGP Peer commands. (line 20)
-* neighbor PEER distribute-list NAME [in|out]: Peer filtering.
- (line 7)
-* neighbor PEER dont-capability-negotiate: Capability Negotiation.
- (line 51)
-* neighbor PEER ebgp-multihop: BGP Peer commands. (line 17)
-* neighbor PEER filter-list NAME [in|out]: Peer filtering. (line 13)
-* neighbor PEER interface IFNAME: BGP Peer commands. (line 33)
-* neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 64)
-* neighbor PEER next-hop-self: BGP Peer commands. (line 39)
-* neighbor PEER override-capability: Capability Negotiation.
- (line 67)
-* neighbor PEER peer-group WORD: BGP Peer Group. (line 10)
-* neighbor PEER port PORT: BGP Peer commands. (line 53)
-* neighbor PEER prefix-list NAME [in|out]: Peer filtering. (line 11)
-* neighbor PEER remote-as ASN: Defining Peer. (line 7)
-* neighbor PEER route-map NAME [in|out]: Peer filtering. (line 15)
-* neighbor PEER route-reflector-client: Route Reflector. (line 9)
-* neighbor PEER send-community: BGP Peer commands. (line 56)
-* neighbor PEER shutdown: BGP Peer commands. (line 10)
-* neighbor PEER strict-capability-match: Capability Negotiation.
- (line 40)
-* neighbor PEER update-source: BGP Peer commands. (line 44)
-* neighbor PEER version VERSION: BGP Peer commands. (line 24)
-* neighbor PEER weight WEIGHT: BGP Peer commands. (line 59)
-* neighbor PEER-GROUP route-server-client: Commands for configuring a Route Server.
- (line 10)
-* neighbor WORD peer-group: BGP Peer Group. (line 7)
-* neighbor X:X::X:X route-server-client: Commands for configuring a Route Server.
- (line 12)
-* network A.B.C.D/M: BGP route. (line 7)
-* network A.B.C.D/M area <0-4294967295>: OSPF router. (line 155)
-* network A.B.C.D/M area A.B.C.D: OSPF router. (line 154)
-* network IFNAME <1>: ripngd Configuration.
- (line 18)
-* network IFNAME: RIP Configuration. (line 27)
-* network NETWORK <1>: ripngd Configuration.
- (line 15)
-* network NETWORK: RIP Configuration. (line 15)
-* no aggregate-address A.B.C.D/M: Route Aggregation. (line 18)
-* no area <0-4294967295> authentication: OSPF area. (line 129)
-* no area <0-4294967295> export-list NAME: OSPF area. (line 87)
-* no area <0-4294967295> filter-list prefix NAME in: OSPF area.
- (line 121)
-* no area <0-4294967295> filter-list prefix NAME out: OSPF area.
- (line 122)
-* no area <0-4294967295> import-list NAME: OSPF area. (line 111)
-* no area <0-4294967295> range A.B.C.D/M: OSPF area. (line 10)
-* no area <0-4294967295> shortcut: OSPF area. (line 57)
-* no area <0-4294967295> stub: OSPF area. (line 64)
-* no area <0-4294967295> stub no-summary: OSPF area. (line 76)
-* no area <0-4294967295> virtual-link A.B.C.D: OSPF area. (line 52)
-* no area A.B.C.D authentication: OSPF area. (line 128)
-* no area A.B.C.D default-cost <0-16777215>: OSPF area. (line 81)
-* no area A.B.C.D export-list NAME: OSPF area. (line 86)
-* no area A.B.C.D filter-list prefix NAME in: OSPF area. (line 119)
-* no area A.B.C.D filter-list prefix NAME out: OSPF area. (line 120)
-* no area A.B.C.D import-list NAME: OSPF area. (line 110)
-* no area A.B.C.D range A.B.C.D/M: OSPF area. (line 9)
-* no area A.B.C.D range IPV4_PREFIX not-advertise: OSPF area. (line 29)
-* no area A.B.C.D range IPV4_PREFIX substitute IPV4_PREFIX: OSPF area.
- (line 36)
-* no area A.B.C.D shortcut: OSPF area. (line 56)
-* no area A.B.C.D stub: OSPF area. (line 63)
-* no area A.B.C.D stub no-summary: OSPF area. (line 75)
-* no area A.B.C.D virtual-link A.B.C.D: OSPF area. (line 51)
-* no auto-cost reference-bandwidth: OSPF router. (line 144)
-* no bandwidth <1-10000000>: Interface Commands. (line 32)
-* no banner motd: Basic Config Commands.
- (line 113)
-* no bgp multiple-instance: Multiple instance. (line 14)
-* no debug event: More Show IP BGP. (line 39)
-* no debug keepalive: More Show IP BGP. (line 43)
-* no debug ospf ism: Debugging OSPF. (line 14)
-* no debug ospf ism (status|events|timers): Debugging OSPF. (line 15)
-* no debug ospf lsa: Debugging OSPF. (line 24)
-* no debug ospf lsa (generate|flooding|refresh): Debugging OSPF.
- (line 25)
-* no debug ospf nsm: Debugging OSPF. (line 19)
-* no debug ospf nsm (status|events|timers): Debugging OSPF. (line 20)
-* no debug ospf packet (hello|dd|ls-request|ls-update|ls-ack|all) (send|recv) [detail]: Debugging OSPF.
- (line 10)
-* no debug ospf zebra: Debugging OSPF. (line 29)
-* no debug ospf zebra (interface|redistribute): Debugging OSPF.
- (line 30)
-* no debug update: More Show IP BGP. (line 41)
-* no default-information originate: Redistribute routes to OSPF.
- (line 40)
-* no default-metric: Redistribute routes to OSPF.
- (line 53)
-* no default-metric <1-16>: RIP Metric Manipulation.
- (line 12)
-* no distance <1-255> <1>: Redistribute routes to OSPF.
- (line 56)
-* no distance <1-255>: RIP distance. (line 10)
-* no distance <1-255> A.B.C.D/M: RIP distance. (line 14)
-* no distance <1-255> A.B.C.D/M ACCESS-LIST: RIP distance. (line 19)
-* no distance ospf: Redistribute routes to OSPF.
- (line 60)
-* no distribute-list NAME out (kernel|connected|static|rip|ospf: Redistribute routes to OSPF.
- (line 50)
-* no exec-timeout: Basic Config Commands.
- (line 124)
-* no ip address ADDRESS/PREFIX: Interface Commands. (line 15)
-* no ip address ADDRESS/PREFIX secondary: Interface Commands. (line 20)
-* no ip as-path access-list WORD: AS Path Access List. (line 12)
-* no ip as-path access-list WORD {permit|deny} LINE: AS Path Access List.
- (line 13)
-* no ip community-list expanded NAME: BGP Community Lists. (line 37)
-* no ip community-list NAME: BGP Community Lists. (line 35)
-* no ip community-list standard NAME: BGP Community Lists. (line 36)
-* no ip extcommunity-list expanded NAME: BGP Extended Community Lists.
- (line 29)
-* no ip extcommunity-list NAME: BGP Extended Community Lists.
- (line 27)
-* no ip extcommunity-list standard NAME: BGP Extended Community Lists.
- (line 28)
-* no ip ospf authentication-key: OSPF interface. (line 8)
-* no ip ospf cost: OSPF interface. (line 31)
-* no ip ospf dead-interval: OSPF interface. (line 38)
-* no ip ospf hello-interval: OSPF interface. (line 55)
-* no ip ospf message-digest-key: OSPF interface. (line 14)
-* no ip ospf network: OSPF interface. (line 66)
-* no ip ospf priority: OSPF interface. (line 70)
-* no ip ospf retransmit interval: OSPF interface. (line 77)
-* no ip ospf transmit-delay: OSPF interface. (line 83)
-* no ip prefix-list NAME: IP Prefix List. (line 67)
-* no ip prefix-list NAME description [DESC]: ip prefix-list description.
- (line 11)
-* no ip prefix-list sequence-number: ip prefix-list sequential number control.
- (line 11)
-* no ip rip authentication key-chain KEY-CHAIN: RIP Authentication.
- (line 44)
-* no ip rip authentication mode md5: RIP Authentication. (line 30)
-* no ip rip authentication mode text: RIP Authentication. (line 34)
-* no ip rip authentication string STRING: RIP Authentication. (line 38)
-* no ip split-horizon: RIP Configuration. (line 71)
-* no ip6 address ADDRESS/PREFIX: Interface Commands. (line 16)
-* no ipv6 nd adv-interval-option: Router Advertisement.
- (line 128)
-* no ipv6 nd home-agent-config-flag: Router Advertisement.
- (line 105)
-* no ipv6 nd home-agent-lifetime: Router Advertisement.
- (line 120)
-* no ipv6 nd home-agent-preference: Router Advertisement.
- (line 113)
-* no ipv6 nd managed-config-flag: Router Advertisement.
- (line 88)
-* no ipv6 nd other-config-flag: Router Advertisement.
- (line 97)
-* no ipv6 nd ra-interval: Router Advertisement.
- (line 50)
-* no ipv6 nd ra-interval msec: Router Advertisement.
- (line 58)
-* no ipv6 nd ra-lifetime: Router Advertisement.
- (line 66)
-* no ipv6 nd reachable-time: Router Advertisement.
- (line 78)
-* no ipv6 nd suppress-ra: Router Advertisement.
- (line 7)
-* no link-detect: Interface Commands. (line 38)
-* no log facility: Basic Config Commands.
- (line 82)
-* no log file: Basic Config Commands.
- (line 43)
-* no log monitor: Basic Config Commands.
- (line 70)
-* no log record-priority: Basic Config Commands.
- (line 88)
-* no log stdout: Basic Config Commands.
- (line 30)
-* no log syslog: Basic Config Commands.
- (line 61)
-* no log trap: Basic Config Commands.
- (line 18)
-* no max-metric router-lsa [on-startup|on-shutdown|administrative]: OSPF router.
- (line 113)
-* no multicast: Interface Commands. (line 28)
-* no neighbor A.B.C.D: RIP Configuration. (line 35)
-* no neighbor PEER default-originate: BGP Peer commands. (line 48)
-* no neighbor PEER description ...: BGP Peer commands. (line 21)
-* no neighbor PEER dont-capability-negotiate: Capability Negotiation.
- (line 52)
-* no neighbor PEER ebgp-multihop: BGP Peer commands. (line 18)
-* no neighbor PEER interface IFNAME: BGP Peer commands. (line 34)
-* no neighbor PEER maximum-prefix NUMBER: BGP Peer commands. (line 65)
-* no neighbor PEER next-hop-self: BGP Peer commands. (line 40)
-* no neighbor PEER override-capability: Capability Negotiation.
- (line 68)
-* no neighbor PEER route-reflector-client: Route Reflector. (line 10)
-* no neighbor PEER shutdown: BGP Peer commands. (line 11)
-* no neighbor PEER strict-capability-match: Capability Negotiation.
- (line 41)
-* no neighbor PEER update-source: BGP Peer commands. (line 45)
-* no neighbor PEER weight WEIGHT: BGP Peer commands. (line 60)
-* no network A.B.C.D/M: BGP route. (line 17)
-* no network A.B.C.D/M area <0-4294967295>: OSPF router. (line 157)
-* no network A.B.C.D/M area A.B.C.D: OSPF router. (line 156)
-* no network IFNAME: RIP Configuration. (line 28)
-* no network NETWORK: RIP Configuration. (line 16)
-* no ospf abr-type TYPE: OSPF router. (line 27)
-* no ospf rfc1583compatibility: OSPF router. (line 49)
-* no ospf router-id: OSPF router. (line 17)
-* no passive interface INTERFACE: OSPF router. (line 60)
-* no passive-interface IFNAME: RIP Configuration. (line 58)
-* no redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
- (line 22)
-* no redistribute bgp: How to Announce RIP route.
- (line 44)
-* no redistribute connected: How to Announce RIP route.
- (line 26)
-* no redistribute kernel: How to Announce RIP route.
- (line 10)
-* no redistribute ospf: How to Announce RIP route.
- (line 36)
-* no redistribute static: How to Announce RIP route.
- (line 18)
-* no route A.B.C.D/M: How to Announce RIP route.
- (line 54)
-* no router bgp ASN: BGP router. (line 19)
-* no router ospf: OSPF router. (line 11)
-* no router rip: RIP Configuration. (line 12)
-* no router zebra: Redistribute routes to OSPF.
- (line 63)
-* no shutdown: Interface Commands. (line 10)
-* no smux peer OID: MIB and command reference.
- (line 29)
-* no smux peer OID PASSWORD: MIB and command reference.
- (line 32)
-* no timers basic: RIP Timers. (line 31)
-* no timers throttle spf: OSPF router. (line 72)
-* no version: RIP Version Control. (line 30)
-* offset-list ACCESS-LIST (in|out): RIP Metric Manipulation.
- (line 20)
-* offset-list ACCESS-LIST (in|out) IFNAME: RIP Metric Manipulation.
- (line 21)
-* on-match goto N: Route Map Exit Action Command.
- (line 11)
-* on-match next: Route Map Exit Action Command.
- (line 7)
-* ospf abr-type TYPE: OSPF router. (line 26)
-* ospf rfc1583compatibility: OSPF router. (line 48)
-* ospf router-id A.B.C.D: OSPF router. (line 16)
-* passive interface INTERFACE: OSPF router. (line 59)
-* passive-interface (IFNAME|default): RIP Configuration. (line 57)
-* password PASSWORD: Basic Config Commands.
- (line 10)
-* redistribute (kernel|connected|static|rip|bgp): Redistribute routes to OSPF.
- (line 7)
-* redistribute (kernel|connected|static|rip|bgp) metric <0-16777214>: Redistribute routes to OSPF.
- (line 15)
-* redistribute (kernel|connected|static|rip|bgp) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
- (line 17)
-* redistribute (kernel|connected|static|rip|bgp) metric-type (1|2): Redistribute routes to OSPF.
- (line 11)
-* redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214>: Redistribute routes to OSPF.
- (line 19)
-* redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) metric <0-16777214> route-map WORD: Redistribute routes to OSPF.
- (line 21)
-* redistribute (kernel|connected|static|rip|bgp) metric-type (1|2) route-map WORD: Redistribute routes to OSPF.
- (line 13)
-* redistribute (kernel|connected|static|rip|bgp) ROUTE-MAP: Redistribute routes to OSPF.
- (line 9)
-* redistribute bgp: How to Announce RIP route.
- (line 41)
-* redistribute bgp metric <0-16>: How to Announce RIP route.
- (line 42)
-* redistribute bgp route-map ROUTE-MAP: How to Announce RIP route.
- (line 43)
-* redistribute connected <1>: Redistribute to BGP. (line 13)
-* redistribute connected <2>: Redistribute routes to OSPF6.
- (line 8)
-* redistribute connected: How to Announce RIP route.
- (line 23)
-* redistribute connected metric <0-16>: How to Announce RIP route.
- (line 24)
-* redistribute connected route-map ROUTE-MAP: How to Announce RIP route.
- (line 25)
-* redistribute kernel <1>: Redistribute to BGP. (line 7)
-* redistribute kernel: How to Announce RIP route.
- (line 7)
-* redistribute kernel metric <0-16>: How to Announce RIP route.
- (line 8)
-* redistribute kernel route-map ROUTE-MAP: How to Announce RIP route.
- (line 9)
-* redistribute ospf <1>: Redistribute to BGP. (line 19)
-* redistribute ospf: How to Announce RIP route.
- (line 33)
-* redistribute ospf metric <0-16>: How to Announce RIP route.
- (line 34)
-* redistribute ospf route-map ROUTE-MAP: How to Announce RIP route.
- (line 35)
-* redistribute rip: Redistribute to BGP. (line 16)
-* redistribute ripng: Redistribute routes to OSPF6.
- (line 9)
-* redistribute static <1>: Redistribute to BGP. (line 10)
-* redistribute static <2>: Redistribute routes to OSPF6.
- (line 7)
-* redistribute static: How to Announce RIP route.
- (line 15)
-* redistribute static metric <0-16>: How to Announce RIP route.
- (line 16)
-* redistribute static route-map ROUTE-MAP: How to Announce RIP route.
- (line 17)
-* route A.B.C.D/M: How to Announce RIP route.
- (line 53)
-* route NETWORK: ripngd Configuration.
- (line 21)
-* route-map ROUTE-MAP-NAME (permit|deny) ORDER: Route Map Command.
- (line 7)
-* router bgp AS-NUMBER: BGP instance and view.
- (line 11)
-* router bgp AS-NUMBER view NAME: BGP instance and view.
- (line 28)
-* router bgp ASN: BGP router. (line 13)
-* router ospf: OSPF router. (line 10)
-* router ospf6: OSPF6 router. (line 7)
-* router rip: RIP Configuration. (line 7)
-* router ripng: ripngd Configuration.
- (line 9)
-* router zebra <1>: Redistribute routes to OSPF.
- (line 62)
-* router zebra: ripngd Configuration.
- (line 24)
-* router-id A.B.C.D: OSPF6 router. (line 9)
-* service advanced-vty: Basic Config Commands.
- (line 100)
-* service integrated-vtysh-config: VTY shell integrated configuration.
- (line 7)
-* service password-encryption: Basic Config Commands.
- (line 97)
-* service terminal-length <0-512>: Basic Config Commands.
- (line 103)
-* set as-path prepend AS-PATH: Using AS Path in Route Map.
- (line 9)
-* set as-path prepend AS_PATH: Route Map Set Command.
- (line 19)
-* set comm-list WORD delete: BGP Community in Route Map.
- (line 34)
-* set community COMMUNITY <1>: Route Map Set Command.
- (line 22)
-* set community COMMUNITY: BGP Community in Route Map.
- (line 23)
-* set community COMMUNITY additive: BGP Community in Route Map.
- (line 24)
-* set community none: BGP Community in Route Map.
- (line 22)
-* set extcommunity rt EXTCOMMUNITY: BGP Extended Communities in Route Map.
- (line 9)
-* set extcommunity soo EXTCOMMUNITY: BGP Extended Communities in Route Map.
- (line 12)
-* set ip next-hop A.B.C.D: RIP route-map. (line 52)
-* set ip next-hop IPV4_ADDRESS: Route Map Set Command.
- (line 7)
-* set ipv6 next-hop global IPV6_ADDRESS: Route Map Set Command.
- (line 25)
-* set ipv6 next-hop local IPV6_ADDRESS: Route Map Set Command.
- (line 28)
-* set local-preference LOCAL_PREF: Route Map Set Command.
- (line 10)
-* set metric <0-4294967295>: RIP route-map. (line 57)
-* set metric METRIC: Route Map Set Command.
- (line 16)
-* set weight WEIGHT: Route Map Set Command.
- (line 13)
-* show debug: More Show IP BGP. (line 31)
-* show debugging ospf: Debugging OSPF. (line 32)
-* show debugging rip: RIP Debug Commands. (line 29)
-* show debugging ripng: ripngd Terminal Mode Commands.
- (line 9)
-* show interface: zebra Terminal Mode Commands.
- (line 21)
-* show ip bgp: Show IP BGP. (line 7)
-* show ip bgp A.B.C.D: Show IP BGP. (line 8)
-* show ip bgp community: Display BGP Routes by Community.
- (line 11)
-* show ip bgp community COMMUNITY <1>: More Show IP BGP. (line 11)
-* show ip bgp community COMMUNITY: Display BGP Routes by Community.
- (line 12)
-* show ip bgp community COMMUNITY exact-match <1>: More Show IP BGP.
- (line 12)
-* show ip bgp community COMMUNITY exact-match: Display BGP Routes by Community.
- (line 13)
-* show ip bgp community-list WORD <1>: More Show IP BGP. (line 16)
-* show ip bgp community-list WORD: Display BGP Routes by Community.
- (line 20)
-* show ip bgp community-list WORD exact-match <1>: More Show IP BGP.
- (line 17)
-* show ip bgp community-list WORD exact-match: Display BGP Routes by Community.
- (line 21)
-* show ip bgp neighbor [PEER]: More Show IP BGP. (line 23)
-* show ip bgp regexp LINE <1>: More Show IP BGP. (line 7)
-* show ip bgp regexp LINE: Display BGP Routes by AS Path.
- (line 10)
-* show ip bgp summary: More Show IP BGP. (line 21)
-* show ip bgp view NAME: Viewing the view. (line 9)
-* show ip bgp X:X::X:X: Show IP BGP. (line 9)
-* show ip community-list: BGP Community Lists. (line 42)
-* show ip community-list NAME: BGP Community Lists. (line 43)
-* show ip extcommunity-list: BGP Extended Community Lists.
- (line 35)
-* show ip extcommunity-list NAME: BGP Extended Community Lists.
- (line 36)
-* show ip ospf: Showing OSPF information.
- (line 7)
-* show ip ospf database: Showing OSPF information.
- (line 20)
-* show ip ospf database (asbr-summary|external|network|router|summary): Showing OSPF information.
- (line 23)
-* show ip ospf database (asbr-summary|external|network|router|summary) adv-router ADV-ROUTER: Showing OSPF information.
- (line 30)
-* show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID: Showing OSPF information.
- (line 25)
-* show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID adv-router ADV-ROUTER: Showing OSPF information.
- (line 28)
-* show ip ospf database (asbr-summary|external|network|router|summary) LINK-STATE-ID self-originate: Showing OSPF information.
- (line 33)
-* show ip ospf database (asbr-summary|external|network|router|summary) self-originate: Showing OSPF information.
- (line 35)
-* show ip ospf database max-age: Showing OSPF information.
- (line 37)
-* show ip ospf database self-originate: Showing OSPF information.
- (line 39)
-* show ip ospf interface [INTERFACE]: Showing OSPF information.
- (line 11)
-* show ip ospf neighbor: Showing OSPF information.
- (line 15)
-* show ip ospf neighbor detail: Showing OSPF information.
- (line 17)
-* show ip ospf neighbor INTERFACE: Showing OSPF information.
- (line 16)
-* show ip ospf neighbor INTERFACE detail: Showing OSPF information.
- (line 18)
-* show ip ospf route: Showing OSPF information.
- (line 41)
-* show ip prefix-list: Showing ip prefix-list.
- (line 7)
-* show ip prefix-list detail: Showing ip prefix-list.
- (line 31)
-* show ip prefix-list detail NAME: Showing ip prefix-list.
- (line 33)
-* show ip prefix-list NAME: Showing ip prefix-list.
- (line 10)
-* show ip prefix-list NAME A.B.C.D/M: Showing ip prefix-list.
- (line 17)
-* show ip prefix-list NAME A.B.C.D/M first-match: Showing ip prefix-list.
- (line 25)
-* show ip prefix-list NAME A.B.C.D/M longer: Showing ip prefix-list.
- (line 23)
-* show ip prefix-list NAME seq NUM: Showing ip prefix-list.
- (line 13)
-* show ip prefix-list summary: Showing ip prefix-list.
- (line 27)
-* show ip prefix-list summary NAME: Showing ip prefix-list.
- (line 29)
-* show ip protocols: Show RIP Information.
- (line 17)
-* show ip rip: Show RIP Information.
- (line 9)
-* show ip ripng: ripngd Terminal Mode Commands.
- (line 7)
-* show ip route: zebra Terminal Mode Commands.
- (line 7)
-* show ipforward: zebra Terminal Mode Commands.
- (line 23)
-* show ipv6 ospf6 [INSTANCE_ID]: Showing OSPF6 information.
- (line 7)
-* show ipv6 ospf6 database: Showing OSPF6 information.
- (line 11)
-* show ipv6 ospf6 interface: Showing OSPF6 information.
- (line 15)
-* show ipv6 ospf6 neighbor: Showing OSPF6 information.
- (line 18)
-* show ipv6 ospf6 request-list A.B.C.D: Showing OSPF6 information.
- (line 21)
-* show ipv6 route: zebra Terminal Mode Commands.
- (line 19)
-* show ipv6 route ospf6: Showing OSPF6 information.
- (line 24)
-* show ipv6forward: zebra Terminal Mode Commands.
- (line 28)
-* show logging: Terminal Mode Commands.
- (line 30)
-* show version: Terminal Mode Commands.
- (line 27)
-* shutdown: Interface Commands. (line 9)
-* smux peer OID: MIB and command reference.
- (line 28)
-* smux peer OID PASSWORD: MIB and command reference.
- (line 31)
-* table TABLENO: Static Route Commands.
- (line 81)
-* terminal length <0-512>: Terminal Mode Commands.
- (line 17)
-* timers basic UPDATE TIMEOUT GARBAGE: RIP Timers. (line 7)
-* timers throttle spf DELAY INITIAL-HOLDTIME MAX-HOLDTIME: OSPF router.
- (line 71)
-* username USERNAME nopassword: VTY shell username. (line 7)
-* version VERSION: RIP Version Control. (line 20)
-* who: Terminal Mode Commands.
- (line 21)
-* write file: Terminal Mode Commands.
- (line 10)
-* write terminal: Terminal Mode Commands.
- (line 7)
-
-
-File: quagga.info, Node: VTY Key Index, Prev: Command Index, Up: Top
-
-VTY Key Index
-*************
-
-
-* Menu:
-
-* <DEL>: CLI Editing Commands. (line 11)
-* <DOWN>: CLI Advanced Commands.
- (line 17)
-* <LEFT>: CLI Movement Commands.
- (line 15)
-* <RIGHT>: CLI Movement Commands.
- (line 11)
-* <TAB>: CLI Advanced Commands.
- (line 24)
-* <UP>: CLI Advanced Commands.
- (line 21)
-* ?: CLI Advanced Commands.
- (line 27)
-* C-a: CLI Movement Commands.
- (line 24)
-* C-b: CLI Movement Commands.
- (line 15)
-* C-c: CLI Advanced Commands.
- (line 10)
-* C-d: CLI Editing Commands. (line 14)
-* C-e: CLI Movement Commands.
- (line 27)
-* C-f: CLI Movement Commands.
- (line 11)
-* C-h: CLI Editing Commands. (line 11)
-* C-k: CLI Editing Commands. (line 23)
-* C-n: CLI Advanced Commands.
- (line 17)
-* C-p: CLI Advanced Commands.
- (line 21)
-* C-t: CLI Editing Commands. (line 29)
-* C-u: CLI Editing Commands. (line 26)
-* C-w: CLI Editing Commands. (line 20)
-* C-z: CLI Advanced Commands.
- (line 13)
-* M-b: CLI Movement Commands.
- (line 21)
-* M-d: CLI Editing Commands. (line 17)
-* M-f: CLI Movement Commands.
- (line 18)
-
-
-
-Tag Table:
-Node: Top1971
-Node: Overview3329
-Node: About Quagga4730
-Node: System Architecture6983
-Node: Supported Platforms9673
-Node: Supported RFC10814
-Node: How to get Quagga12896
-Node: Mailing List13650
-Node: Bug Reports14097
-Node: Installation14975
-Node: Configure the Software15409
-Node: The Configure script and its options15657
-Node: Least-Privilege support18845
-Node: Linux notes20581
-Ref: Linux notes-Footnote-122439
-Node: Build the Software22505
-Node: Install the Software23053
-Node: Basic commands24513
-Node: Config Commands25288
-Node: Basic Config Commands26181
-Node: Sample Config File31671
-Node: Terminal Mode Commands32441
-Node: Common Invocation Options33538
-Node: Virtual Terminal Interfaces34945
-Node: VTY Overview35456
-Node: VTY Modes36707
-Node: VTY View Mode37157
-Node: VTY Enable Mode37407
-Node: VTY Other Modes37685
-Node: VTY CLI Commands37861
-Node: CLI Movement Commands38321
-Node: CLI Editing Commands38844
-Node: CLI Advanced Commands39432
-Node: Zebra40198
-Node: Invoking zebra40707
-Node: Interface Commands41238
-Node: Static Route Commands42770
-Node: zebra Terminal Mode Commands46043
-Node: RIP47008
-Node: Starting and Stopping ripd47969
-Node: RIP netmask49382
-Node: RIP Configuration50481
-Node: RIP Version Control53481
-Node: How to Announce RIP route55663
-Node: Filtering RIP Routes58228
-Node: RIP Metric Manipulation59695
-Node: RIP distance60608
-Node: RIP route-map61423
-Node: RIP Authentication63939
-Node: RIP Timers66182
-Node: Show RIP Information67470
-Node: RIP Debug Commands68843
-Node: RIPng69839
-Node: Invoking ripngd70159
-Node: ripngd Configuration70408
-Node: ripngd Terminal Mode Commands71159
-Node: ripngd Filtering Commands71523
-Node: OSPFv272032
-Node: Configuring ospfd72684
-Node: OSPF router73232
-Node: OSPF area81558
-Node: OSPF interface87683
-Ref: ip ospf dead-interval minimal89252
-Node: Redistribute routes to OSPF91824
-Node: Showing OSPF information94482
-Ref: show ip ospf94667
-Node: Debugging OSPF95998
-Node: OSPF Configuration Examples97073
-Node: OSPFv398443
-Node: OSPF6 router98796
-Node: OSPF6 area99150
-Node: OSPF6 interface99328
-Node: Redistribute routes to OSPF6100205
-Node: Showing OSPF6 information100521
-Node: OSPF6 Configuration Examples101378
-Node: BGP101799
-Node: Starting BGP102721
-Node: BGP router103298
-Node: BGP distance104542
-Node: BGP decision process104980
-Node: BGP network105462
-Node: BGP route105652
-Node: Route Aggregation106208
-Node: Redistribute to BGP106777
-Node: BGP Peer107304
-Node: Defining Peer107491
-Node: BGP Peer commands108104
-Node: Peer filtering110508
-Node: BGP Peer Group111016
-Node: BGP Address Family111329
-Node: Autonomous System111483
-Node: AS Path Regular Expression112360
-Node: Display BGP Routes by AS Path113607
-Node: AS Path Access List114047
-Node: Using AS Path in Route Map114514
-Node: Private AS Numbers114795
-Node: BGP Communities Attribute114953
-Node: BGP Community Lists117414
-Node: Numbered BGP Community Lists120068
-Node: BGP Community in Route Map121655
-Node: Display BGP Routes by Community123598
-Node: Using BGP Communities Attribute124767
-Node: BGP Extended Communities Attribute128335
-Node: BGP Extended Community Lists130107
-Node: BGP Extended Communities in Route Map131982
-Node: Displaying BGP routes132441
-Node: Show IP BGP132678
-Node: More Show IP BGP133378
-Node: Capability Negotiation134529
-Node: Route Reflector138001
-Node: Route Server138280
-Node: Multiple instance139346
-Node: BGP instance and view141191
-Node: Routing policy142571
-Node: Viewing the view143339
-Node: How to set up a 6-Bone connection143624
-Node: Dump BGP packets and table144996
-Node: BGP Configuration Examples145578
-Node: Configuring Quagga as a Route Server154529
-Node: Description of the Route Server model155490
-Ref: fig:normal-processing157067
-Ref: fig:full-mesh157669
-Ref: fig:route-server157764
-Ref: filter-delegation158159
-Ref: Route Server tasks159328
-Ref: Route-server path filter process159699
-Ref: fig:rs-processing162013
-Node: Commands for configuring a Route Server164422
-Node: Example of Route Server Configuration167449
-Node: Configuration of the BGP routers without Route Server168370
-Node: Configuration of the BGP routers with Route Server171253
-Node: Configuration of the Route Server itself172554
-Node: Further considerations about Import and Export route-maps177553
-Node: VTY shell180597
-Node: VTY shell username181266
-Node: VTY shell integrated configuration181898
-Node: Filtering183346
-Node: IP Access List183699
-Node: IP Prefix List184085
-Node: ip prefix-list description187104
-Node: ip prefix-list sequential number control187631
-Node: Showing ip prefix-list188173
-Node: Clear counter of ip prefix-list189281
-Node: Route Map189720
-Node: Route Map Command193165
-Node: Route Map Match Command193474
-Node: Route Map Set Command194098
-Node: Route Map Call Command195006
-Node: Route Map Exit Action Command195336
-Node: Route Map Examples195818
-Node: IPv6 Support196330
-Node: Router Advertisement196902
-Node: Kernel Interface202518
-Node: SNMP Support204475
-Node: Getting and installing an SNMP agent205074
-Node: SMUX configuration205647
-Node: MIB and command reference207783
-Node: Handling SNMP Traps209198
-Node: Zebra Protocol215277
-Node: Packet Binary Dump Format219366
-Node: Command Index230976
-Node: VTY Key Index289710
-
-End Tag Table