2005-04-28 Paul Jakma <paul@dishone.st>

	* quagga.info: updated

2 files changed, 161 insertions, 164 deletions

diff --git a/doc/ChangeLog b/doc/ChangeLog
index 4f1d5a83..32ac5e49 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,7 @@
+2005-04-28 Paul Jakma <paul@dishone.st>
+
+	* quagga.info: updated
+
 2005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
 
 	* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
diff --git a/doc/quagga.info b/doc/quagga.info
index 0e9285ce..8acf5dc3 100644
--- a/doc/quagga.info
+++ b/doc/quagga.info
@@ -3825,17 +3825,11 @@ fig:normal-processing::, it consists of three steps:
      its attributes modified. Those routes which are accepted by the
      `Out' filters of a peer are announced to that peer.
 
-
+ Figure 10.1: Announcement processing inside a "normal" BGP speaker
 
-Figure 10.1: Announcement processing inside a "normal" BGP speaker
+ Figure 10.2: Full Mesh
 
-
-
-Figure 10.2: Full Mesh
-
-
-
-Figure 10.3: Route Server and clients
+ Figure 10.3: Route Server and clients
 
    Of course we want that the routing tables obtained in each of the
 routers are the same when using the route server than when not. But as
@@ -3920,9 +3914,8 @@ additional comments:
      not to remove them as they do not hurt anybody (they can always be
      left empty).
 
-
-
-Figure 10.4: Announcement processing model implemented by the Route Server
+ Figure 10.4: Announcement processing model implemented by the Route
+Server
 
 
 File: quagga.info,  Node: Commands for configuring a Route Server,  Next: Example of Route Server Configuration,  Prev: Description of the Route Server model,  Up: Configuring Quagga as a Route Server
@@ -6080,157 +6073,157 @@ VTY Key Index
 
 
 Tag Table:
-Node: Top1890
-Node: Overview2485
-Node: About Quagga3886
-Node: System Architecture6139
-Node: Supported Platforms8829
-Node: Supported RFC9970
-Node: How to get Quagga11934
-Node: Mailing List12688
-Node: Bug Reports13135
-Node: Installation14013
-Node: Configure the Software14447
-Node: The Configure script and its options14695
-Node: Least-Privilege support17883
-Node: Linux notes19619
-Ref: Linux notes-Footnote-121477
-Node: Build the Software21543
-Node: Install the Software22091
-Node: Basic commands23551
-Node: Config Commands24326
-Node: Basic Config Commands25219
-Node: Sample Config File30709
-Node: Terminal Mode Commands31479
-Node: Common Invocation Options32576
-Node: Virtual Terminal Interfaces33983
-Node: VTY Overview34494
-Node: VTY Modes35745
-Node: VTY View Mode36195
-Node: VTY Enable Mode36445
-Node: VTY Other Modes36723
-Node: VTY CLI Commands36899
-Node: CLI Movement Commands37359
-Node: CLI Editing Commands37882
-Node: CLI Advanced Commands38470
-Node: Zebra39236
-Node: Invoking zebra39745
-Node: Interface Commands40324
-Node: Static Route Commands41856
-Node: zebra Terminal Mode Commands45129
-Node: RIP46094
-Node: Starting and Stopping ripd47031
-Node: RIP netmask48444
-Node: RIP Configuration49543
-Node: How to Announce RIP route53808
-Node: Filtering RIP Routes56371
-Node: RIP Metric Manipulation57838
-Node: RIP distance58751
-Node: RIP route-map59566
-Node: RIP Authentication62082
-Node: RIP Timers63189
-Node: Show RIP Information64475
-Node: RIP Debug Commands65848
-Node: RIPng66844
-Node: Invoking ripngd67164
-Node: ripngd Configuration67413
-Node: ripngd Terminal Mode Commands68164
-Node: ripngd Filtering Commands68528
-Node: OSPFv269037
-Node: Configuring ospfd69596
-Node: OSPF router70064
-Node: OSPF area73220
-Node: OSPF interface78402
-Node: Redistribute routes to OSPF81785
-Node: Showing OSPF information83948
-Node: Debugging OSPF85194
-Node: OSPFv386233
-Node: OSPF6 router86553
-Node: OSPF6 area86907
-Node: OSPF6 interface87085
-Node: Redistribute routes to OSPF687962
-Node: Showing OSPF6 information88278
-Node: BGP89098
-Node: Starting BGP89988
-Node: BGP router90565
-Node: BGP distance91809
-Node: BGP decision process92247
-Node: BGP network92729
-Node: BGP route92919
-Node: Route Aggregation93475
-Node: Redistribute to BGP94044
-Node: BGP Peer94571
-Node: Defining Peer94758
-Node: BGP Peer commands95371
-Node: Peer filtering97775
-Node: BGP Peer Group98283
-Node: BGP Address Family98596
-Node: Autonomous System98750
-Node: AS Path Regular Expression99587
-Node: Display BGP Routes by AS Path100834
-Node: AS Path Access List101274
-Node: Using AS Path in Route Map101741
-Node: Private AS Numbers102022
-Node: BGP Communities Attribute102180
-Node: BGP Community Lists104647
-Node: Numbered BGP Community Lists107301
-Node: BGP Community in Route Map108888
-Node: Display BGP Routes by Community110831
-Node: Using BGP Communities Attribute112000
-Node: BGP Extended Communities Attribute115568
-Node: BGP Extended Community Lists117340
-Node: BGP Extended Communities in Route Map119215
-Node: Displaying BGP routes119674
-Node: Show IP BGP119911
-Node: More Show IP BGP120611
-Node: Capability Negotiation121762
-Node: Route Reflector125066
-Node: Route Server125345
-Node: Multiple instance126411
-Node: BGP instance and view128222
-Node: Routing policy129602
-Node: Viewing the view130370
-Node: How to set up a 6-Bone connection130655
-Node: Dump BGP packets and table132027
-Node: Configuring Quagga as a Route Server132574
-Node: Description of the Route Server model133535
-Ref: fig:normal-processing135112
-Ref: fig:full-mesh135262
-Ref: fig:route-server135358
-Ref: filter-delegation135772
-Ref: Route Server tasks136956
-Ref: Route-server path filter process137327
-Ref: fig:rs-processing139641
-Node: Commands for configuring a Route Server139794
-Node: Example of Route Server Configuration142821
-Node: Configuration of the BGP routers without Route Server143742
-Node: Configuration of the BGP routers with Route Server146625
-Node: Configuration of the Route Server itself147926
-Node: Further considerations about Import and Export route-maps152925
-Node: VTY shell155969
-Node: VTY shell username156638
-Node: VTY shell integrated configuration157270
-Node: Filtering158718
-Node: IP Access List159071
-Node: IP Prefix List159457
-Node: ip prefix-list description162476
-Node: ip prefix-list sequential number control163003
-Node: Showing ip prefix-list163545
-Node: Clear counter of ip prefix-list164653
-Node: Route Map165092
-Node: Route Map Command165597
-Node: Route Map Match Command165794
-Node: Route Map Set Command166418
-Node: IPv6 Support167295
-Node: Router Advertisement167867
-Node: Kernel Interface173483
-Node: SNMP Support175440
-Node: Getting and installing an SNMP agent176012
-Node: SMUX configuration176585
-Node: MIB and command reference178721
-Node: Zebra Protocol180108
-Node: Packet Binary Dump Format182022
-Node: Command Index193632
-Node: VTY Key Index251339
+Node: Top1916
+Node: Overview2511
+Node: About Quagga3912
+Node: System Architecture6165
+Node: Supported Platforms8855
+Node: Supported RFC9996
+Node: How to get Quagga11960
+Node: Mailing List12714
+Node: Bug Reports13161
+Node: Installation14039
+Node: Configure the Software14473
+Node: The Configure script and its options14721
+Node: Least-Privilege support17909
+Node: Linux notes19645
+Ref: Linux notes-Footnote-121503
+Node: Build the Software21569
+Node: Install the Software22117
+Node: Basic commands23577
+Node: Config Commands24352
+Node: Basic Config Commands25245
+Node: Sample Config File30735
+Node: Terminal Mode Commands31505
+Node: Common Invocation Options32602
+Node: Virtual Terminal Interfaces34009
+Node: VTY Overview34520
+Node: VTY Modes35771
+Node: VTY View Mode36221
+Node: VTY Enable Mode36471
+Node: VTY Other Modes36749
+Node: VTY CLI Commands36925
+Node: CLI Movement Commands37385
+Node: CLI Editing Commands37908
+Node: CLI Advanced Commands38496
+Node: Zebra39262
+Node: Invoking zebra39771
+Node: Interface Commands40350
+Node: Static Route Commands41882
+Node: zebra Terminal Mode Commands45155
+Node: RIP46120
+Node: Starting and Stopping ripd47057
+Node: RIP netmask48470
+Node: RIP Configuration49569
+Node: How to Announce RIP route53834
+Node: Filtering RIP Routes56397
+Node: RIP Metric Manipulation57864
+Node: RIP distance58777
+Node: RIP route-map59592
+Node: RIP Authentication62108
+Node: RIP Timers63215
+Node: Show RIP Information64501
+Node: RIP Debug Commands65874
+Node: RIPng66870
+Node: Invoking ripngd67190
+Node: ripngd Configuration67439
+Node: ripngd Terminal Mode Commands68190
+Node: ripngd Filtering Commands68554
+Node: OSPFv269063
+Node: Configuring ospfd69622
+Node: OSPF router70090
+Node: OSPF area73246
+Node: OSPF interface78428
+Node: Redistribute routes to OSPF81811
+Node: Showing OSPF information83974
+Node: Debugging OSPF85220
+Node: OSPFv386259
+Node: OSPF6 router86579
+Node: OSPF6 area86933
+Node: OSPF6 interface87111
+Node: Redistribute routes to OSPF687988
+Node: Showing OSPF6 information88304
+Node: BGP89124
+Node: Starting BGP90014
+Node: BGP router90591
+Node: BGP distance91835
+Node: BGP decision process92273
+Node: BGP network92755
+Node: BGP route92945
+Node: Route Aggregation93501
+Node: Redistribute to BGP94070
+Node: BGP Peer94597
+Node: Defining Peer94784
+Node: BGP Peer commands95397
+Node: Peer filtering97801
+Node: BGP Peer Group98309
+Node: BGP Address Family98622
+Node: Autonomous System98776
+Node: AS Path Regular Expression99613
+Node: Display BGP Routes by AS Path100860
+Node: AS Path Access List101300
+Node: Using AS Path in Route Map101767
+Node: Private AS Numbers102048
+Node: BGP Communities Attribute102206
+Node: BGP Community Lists104673
+Node: Numbered BGP Community Lists107327
+Node: BGP Community in Route Map108914
+Node: Display BGP Routes by Community110857
+Node: Using BGP Communities Attribute112026
+Node: BGP Extended Communities Attribute115594
+Node: BGP Extended Community Lists117366
+Node: BGP Extended Communities in Route Map119241
+Node: Displaying BGP routes119700
+Node: Show IP BGP119937
+Node: More Show IP BGP120637
+Node: Capability Negotiation121788
+Node: Route Reflector125092
+Node: Route Server125371
+Node: Multiple instance126437
+Node: BGP instance and view128248
+Node: Routing policy129628
+Node: Viewing the view130396
+Node: How to set up a 6-Bone connection130681
+Node: Dump BGP packets and table132053
+Node: Configuring Quagga as a Route Server132600
+Node: Description of the Route Server model133561
+Ref: fig:normal-processing135138
+Ref: fig:full-mesh135207
+Ref: fig:route-server135232
+Ref: filter-delegation135574
+Ref: Route Server tasks136758
+Ref: Route-server path filter process137129
+Ref: fig:rs-processing139443
+Node: Commands for configuring a Route Server139520
+Node: Example of Route Server Configuration142547
+Node: Configuration of the BGP routers without Route Server143468
+Node: Configuration of the BGP routers with Route Server146351
+Node: Configuration of the Route Server itself147652
+Node: Further considerations about Import and Export route-maps152651
+Node: VTY shell155695
+Node: VTY shell username156364
+Node: VTY shell integrated configuration156996
+Node: Filtering158444
+Node: IP Access List158797
+Node: IP Prefix List159183
+Node: ip prefix-list description162202
+Node: ip prefix-list sequential number control162729
+Node: Showing ip prefix-list163271
+Node: Clear counter of ip prefix-list164379
+Node: Route Map164818
+Node: Route Map Command165323
+Node: Route Map Match Command165520
+Node: Route Map Set Command166144
+Node: IPv6 Support167021
+Node: Router Advertisement167593
+Node: Kernel Interface173209
+Node: SNMP Support175166
+Node: Getting and installing an SNMP agent175738
+Node: SMUX configuration176311
+Node: MIB and command reference178447
+Node: Zebra Protocol179834
+Node: Packet Binary Dump Format181748
+Node: Command Index193358
+Node: VTY Key Index251065
 
 End Tag Table