[trivia] Remove ChangeLog files, as this data is now maintained in SCM

1 files changed, 0 insertions, 1217 deletions

diff --git a/ripd/ChangeLog b/ripd/ChangeLog
deleted file mode 100644
index 60baef5d..00000000
--- a/ripd/ChangeLog
+++ /dev/null
@@ -1,1217 +0,0 @@
-2008-05-29 Stephen Hemminger <stephen.hemminger@vyatta.com>
-
-	* ripd.c: (rip_auth_md5) fix bogus empty string test
-
-2008-03-13 Paul Jakma <paul.jakma@sun.com>
-
-	* ripd.c/rip_interface.c: Remove 0 entries from rip_msg 
-	  ri_version_msg struct message's, not needed with recent fixes
-	  to mes_lookup.
-
-2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now.
-
-2007-04-11 Emmanuel Vize <emmanuel.vize@6wind.com>
-
-	* ripd.c: (rip_vty_out_uptime) Use new thread_timer_remain_second
-	  to display properly the route timeout, displayed by "show ip rip"
-
-2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second
-	  function instead of rip_next_thread_timer to display the time until
-	  next update properly.
-	  (rip_next_thread_timer) Remove obsolete function.
-
-2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID
-	  macro to simplify logic.
-	  (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does
-	  not give a useful result if prefixlen is 32 (we require a peer
-	  address in such cases).
-	* ripd.c: (rip_update_interface) Fix same bug as above.
-
-2006-09-11 Paul Jakma <paul.jakma@sun.com>
-
-	* ripd.c: (rip_read) remove gratuitous use of mid-function
-	  declaration of vrecv, bug #278.
-	* rip_routemap.c: (route_set_metric) underflow check needs to
-	  use signed, problem identified and diagnosed by Pavel
-	  Nikiforov in bug #293.
-
-2006-06-29 Paul Jakma <paul.jakma@sun.com>
-
-	* rip_zebra: (general) convert redistribute commands to use
-	  the auto-generated defines.
-
-2006-05-04 Paul Jakma <paul.jakma@sun.com>
-
-	* (general) Fixes for bugs #261 and 262. Thanks to
-	  Konstantin V. Gavrilenko <kos@arhont.com> for the problem
-	  reports, testing of a series of proposed patches and comment
-	  on the proposed changes in behaviour.
-	* rip_interface.c: (ip_rip_authentication_mode_cmd) Parse all
-	  of the command before making any changes to configured state.
-	* ripd.c: (rip_read) RIP version control should be absolute and
-          always apply, fixes bug #261 by allowing RIPv1 to be disabled.
-	  Fix bug #262: If authentication is enabled, then
-	  unauthenticated packets should not be accepted. We do however
-	  make an exception for RIPv1 REQUEST packets, to which we will
-	  reply as RIPv1 can now be disabled fully, to allow ripd to
-	  still provide routing /information/ to simple devices.
- 
-2006-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (rip_update_process) Try to fix the logic for sending
-	  an updated on each connected network.  The new code will
-	  attempt to send the update on each connected network, whereas
-	  the previous code seemed to be attempting to avoid sending
-	  more than one RIPv1 update on a given interface, but was coded
-	  incorrectly.  The actual effect of the old code was to send
-	  an update only on the first connected address in the cases
-	  where the interface is not multicast, or RIPv2 is not being used.
-
-2006-01-30 Alain Ritoux <alain.ritoux@6wind.com>
-
-        * ripd.c: correct bug that allowed route learnt through RIP to take
-	  precedence over connectd routes
-
-2006-01-19 Paul Jakma <paul.jakma@sun.com>
-
-        * ripd.c: (main) return from main, not exit, cause it annoys SOS.
-
-2006-01-17 Paul Jakma <paul.jakma@sun.com>
-
-	* ripd.c: (rip_auth_md5) remove pdigest, not needed.
-	  Use a local buffer for the auth_str, where it can be properly 
-	  nul padded. Do so, hence fixing MD5 authentication.  
-	  Key looked up via key ring should be used in preference to 
-	  the RIPv1 simple password, not other way around.
-	  No need to copy around digests, we can reference them
-	  directly.
-	  The auth_len received can't be trusted, some implementations
-	  lie (e.g. older ripd).
-	  (rip_auth_md5_ah_write) rename len local variable to doff
-	  to be consistent with other functions.
-	  (rip_auth_header_write) add the missing return.
-	  (rip_auth_md5_set) use the proper constructs to access stream.
-	  
-2005-10-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (rip_response_process) Instead of calling
-	  rip_interface.c:if_valid_neighbor(), call the equivalent
-	  library function if_lookup_address().
-	* rip_interface.c: (if_valid_neighbor) Remove function, since it is
-	  essentially equivalent to the if_lookup_address() library function.
-	* ripd.h: (if_valid_neighbor) Remove function declaration.
-
-2005-10-28 Paul Jakma <paul.jakma@sun.com>
-
-	* Makefile.am: Add rip_interface.h, or else it doesn't get
-	  included in dists.
-
-2005-10-26 Paul Jakma <paul.jakma@sun.com>
-
-	* (general) static/extern functions and definitions.
-	* rip_interface.h: new file, export the public functions from
-	  rip_interface.c
-	* ripd.c: Update couple more functions to specify void
-	  explicitely.
-
-2005-10-17 Vincent Jardin <vincent.jardin@6wind.com>
-
-	* ripd.c: rip_create_socket() for each packet, it does not bind to the
-	  proper interfaces because we forget to use the from address when
-	  it is specified.
-
-2005-10-06 Alain Ritoux <alain.ritoux@6wind.com>
-
-	* rip_interface.c: Now the command "no ip rip split-horizon
-	  poisoned-reverse" just inhibates the poisoned-reverse effects
-	  but keep spli-horizon activ.
-
-2005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded
-	  table str[]. Replace str[] with calls to new library function
-	  zebra_route_string().
-	* ripd.c: Remove local hard-coded table route_info[].
-	  (show_ip_rip) Replace uses of str[] with calls to new library
-	  functions zebra_route_char and zebra_route_string.
-
-2005-09-29 Alain Ritoux <alain.ritoux@6wind.com>
-
-	* rip_snmp.c: rip2IfConfReceive() sends values in conformance
-	  with RFC. Also PeerDomain is now set to a STRING type.
-	* ripd.h: rip_redistribute_add() API includes metric and distance
-	  added field external_metric in routes.
-	* ripd.c: rip_redistribute_add() API i.e. stores metric and distance
-      Now allows a RIP-route to overcome a redistributed route coming
-	  from a protocol with worse (higher) administrative distance
-	  Metrics from redistribution are shown in show ip rip
-	* rip_zebra.c: adapt to the rip_redistribute_add() API, i.e.
-	  provide distance and metric
-	* rip_interface.c: adapt to the rip_redistribute_add() API
-	* rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage
-	  rather a CMD_WARNING, because set metric ius shared with other
-	  protocols using larger values (such as OSPF)
-	  The match metric action takes first external metric if present
-      (from redistribution) then RIP metric.
-
-2005-09-28 Alain Ritoux <alain.ritoux@6wind.com>
-
-	* ripd.c: use new md5 API
-
-2005-08-16 Paul Jakma <paul.jakma@sun.com>
-
-	* ripd.c: (general) Fix previous commit, broke multicast bind and
-	  hence setting of source port, which broke communication with
-	  non-borken ripd. Fix removes more stuff from rip_interface.c
-	  than it adds to ripd.c ;)
-	  (rip_create_socket) the to argument really is a from argument,
-	  rename it. Set the source port to RIP port unconditionally, it's
-	  required.
-	  (rip_send_packet) Set from address correctly for multicast.
-	  (rip_output_process) trivial: num can be BSS specified, rather
-	  than in body.
-	* rip_interface.c: (rip_interface_multicast_set) strip out
-	  redundant stuff related to bind, which rip_create_socket does.
-	  Just make it set the multicast socket option, as per the
-	  interface concerned, no more.
-
-2005-06-03 Paul Jakma <paul.jakma@sun.com>
-
-	* ripd.c: (rip_create_socket) move it up so rip_send_packet
-	  can use it too. Make it static. Remove the getservbyname stuff,
-	  as RFC2453 3.9.2 says non-RIP port messages should be discarded,
-	  quagga doesnt accept them, no need to lookup port.
-	  Take a 'to' argument, if socket should be bound to something else.
-	  setsockopt_so_recvbuf might need privs, move it to the raised
-	  privileges section.
-	  dont forget to close the socket if bind fails.
-	  (rip_send_packet) use strncpy, just in case (address is under
-	  our control anyway, but still).
-	  dont duplicate rip_create_socket - just use it.
-	  (rip_create) rip_create_socket takes an argument now, modify.
-	  
-2005-06-01 Paul Jakma <paul.jakma@sun.com>
-
-	* rip_interface.c: Fix authentication, no-auth impossible to specify
-	  (rip_interface_new) default to RIP_NO_AUTH
-	  (rip_interface_reset) ditto
-	  (rip_interface_config_write) write out config for simple
-	  
-2005-05-29 Paul Jakma <paul@dishone.st>
-
-	* ripd.c: (rip_output_process) fix error which crept in my
-	  previous rip auth untanglement commit - it had become impossible
-	  to not have authentication (even for v1).
-	
-2005-05-28 Hasso Tepper <hasso at quagga.net>
-
-	* rip_routemap.c: Fix set_metric_addsub_cmd help, it's not about BGP
-	  metric.
-
-2005-05-26 Hasso Tepper <hasso at quagga.net>
-
-	* rip_routemap.c: In case of '0.0.0.0' used as 'nexthop', use sender
-	  address as nexthop in routemap.
-
-2005-05-26 Hasso Tepper <hasso at quagga.net>
-
-	* rip_routemap.c: Make "match interface" routemap command match both -
-	  in and out interfaces.
-
-2005-05-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* rip_interface.c (rip_interface_add): Need to call
-	  rip_passive_interface_apply (was already calling it in
-	  rip_interface_up).
-
-2005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* rip_zebra.c (rip_redistribute_set, rip_redistribute_unset,
-	  rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send
-	  from zclient->sock to zclient.
-
-2005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* rip_interface.c: (rip_interface_delete) After deleting, set
-	  ifp->ifindex to IFINDEX_INTERNAL.
-
-2005-02-04 Paul Jakma <paul@dishone.st>
-
-	* ripd.c: Untangle the construction of RIP auth data.
-	  (rip_auth_prepare_str_send) new helper function, prepare
-	  correct key string.
-	  (rip_auth_simple_write) new helper, write out the
-	  rip simple password auth psuedo-RTE.
-	  (rip_auth_md5_ah_write) new helper, write out the
-	  MD5 auth-header psuedo-RTE.
-	  (rip_auth_header_write) new helper, write out correct
-	  auth header data / psuedo-RTE.
-	  (rip_auth_md5_set) rip out the memmove and writing of the
-	  auth header psuedo-RTE. So that all that is left is to
-	  write the trailing auth digest, and update digest offset
-	  field in the original header.
-	  (rip_write_rte) rip out writing of RIP header, writing of
-	  simple auth data psuedo-RTE. Make it do what its name suggests,
-	  write out actual RTEs.
-	  (rip_output_process) remove the incorrect additional decrements 
-	  of rtemax. Prepare the auth_str, which simple or MD5 auth will
-	  need. Move write out of RIP header and auth data to inside the
-	  loop. Adjust paramaters as required.
-
-2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (rip_create_socket) Replace perror with zlog_err.
-
-2005-01-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (rip_create_socket) Save errno before calling
-	  ripd_privs.change.
-
-2005-01-04 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (rip_recvmsg) Use ZCMSG_FIRSTHDR instead of CMSG_FIRSTHDR.
-
-2004-12-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* ripd.c: (rip_read) Improve 2 error messages to show the source of
-	  the packet when the lookup fails.
-
-2004-12-08 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* *.c: Change level of debug messages to LOG_DEBUG.
-
-2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* rip_main.c: (main) The 2nd argument to openzlog has been removed.
-
-2004-12-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* rip_main.c: (sigint) Use zlog_notice for termination message.
-	  (main) Add a startup announcement using zlog_notice.
-
-2004-11-25 Hasso Tepper <hasso at quagga.net>
-
-	* rip_main.c: Make group to run as configurable.
-
-2004-10-22 Paul Jakma <paul@dishone.st>
-
-	* ripd.c: Collapse redundant passing of various address structs,
-          struct interface and struct connected as arguments to functions
-          down to two key arguments, namely struct connected and, possibly,
-          address of source/destination. Testing for RIPv1 would be useful.
-          (rip_read) lookup struct connected for the received packet, pass
-          it on.
-        * rip_interface.c: With previous changes, we no longer have to tread
-          carefully with struct connected, as it will always be there and
-          valid.
-
-2004-10-19 Andrew J. Schorr <aschorr@telemetry-investments.com>
-
-	* ripd.c: (rip_update_interface) if connected->destination is NULL,
-	  get the broadcast address with ipv4_broadcast_addr()
-	* rip_interface.c: (rip_interface_multicast_set)
-	  connected->destination may be NULL. Improve message if
-	  setsockopt_multicast_ipv4 fails. Improve message if bind fails.
-	  (rip_request_interface_send) If connected->destination is NULL,
-	  get the broadcast address with ipv4_broadcast_addr().
-	  (if_valid_neighbor) Handle PtP subnet addressing properly.
-	  Speed up code by using prefix_match properly.
-
-2004-10-13 Hasso Tepper <hasso at quagga.net>
-
-	* ripd_snmp.c: Remove defaults used to initialize smux connection to
-	  snmpd. Connection is initialized only if smux peer is configured.
-
-2004-10-11 Hasso Tepper <hasso at quagga.net>
-
-	* *.c: Make more strings const.
-
-2004-10-08 Hasso Tepper <hasso at quagga.net>
-
-	* *.c: Fix compiler warnings: make strings const, signed -> unsigned
-	  etc.
-
-2004-09-26 Hasso Tepper <hasso at quagga.net>
-
-	* ripd.c: Fix compiler warning.
-
-2004-09-23 Hasso Tepper <hasso at quagga.net>
-
-	* *.[c|h]: list -> struct list *, listnode -> struct listnode *.
-
-2004-09-17 Paul Jakma <paul@dishone.st>
-
-	* ripd.c: set receive buffer to a decent size, some systems have low
-	  defaults. Problem noted and fix suggested by Stephan Schweizer
-	  in [zebra 20967].
-
-2004-08-19 Paul Jakma <paul@dishone.st>
-
-	* rip_interface.c: (rip_interface_multicast_set) get rid
-	  of extraneous if_pointopoint arg. ifp is accessible via connected.
-	  pass connected->ifp->ifindex to setsockopt_multicast_ipv4.
-	* ripd.c: (rip_send_packet) update call to
-	  rip_interface_multicast_set
-	* ripd.h: update rip_interface_multicast_set prototype
-	
-2004-06-11 Sowmini Varadhan <sowmini.varadhan@sun.com>
-
-	* ripd.c: (rip_distribute_update_all) distribute list hook
-	  function pointer prototype requires struct prefix_list * arg.
-	  (rip_distribute_update_all_wrapper) update to pass required arg,
-	  NULL.
-	 
-2004-06-06 Paul Jakma <paul.jakma@sun.com>
-
-	* ripd.h: Add define for the RIPv2 Authentication Data family
-	  Move the auth type defines up to where other defines live.
-	  Add RIP_AUTH_MD5_COMPAT_SIZE, for backwards compatible
-	  md5->auth_len size. Add md5_auth_len field to struct
-          rip_interface: (rip_interface_new) Init md5_auth_len to compatible 
-          size.
-          (ip_rip_authentication_mode_cmd) Extended to handle setting
-          md5 auth-length. Appropriate aliases added.
-          (no_ip_rip_authentication_mode_cmd) Reset md5_auth_len to
-          compatible size.
-          (rip_interface_config_write) Teach it about md5_auth_len.
-          _always_ write out the auth-length, so that everyone will get
-          the setting in their config file, and hence allow for a future
-          change of default for md5_auth_len to be less painful - every md5
-          user will have this setting in their config file.
-          ripd.c: (rip_packet_dump) Change nasty hard coded constants to 
-          symbolic defines. Change various tests of 'ntoh.(variable) ==
-          constant' to test 'variable == ntoh.(constant)'. Clean up
-          indentation on some long lines.
-          (rip_auth_simple_password) ditto.
-          (rip_auth_md5) ditto, also add length argument and sanity check 
-          md5 data offset field. Sanity check md5 auth length, accept RFC
-          or old-ripd/cisco lengths.
-          (rip_auth_md5_set) as per (rip_packet_dump), also write out
-          the configured md5 auth length for the interface (old-ripd or rfc)
-          (rip_read) as per (rip_packet_dump)
-          (rip_write_rte) ditto
-          (rip_response_process) ditto
-          (rip_write_rte) ditto
-          
-2004-06-04 JJ Ludman <jacques.ludman@sun.com>
-
-	* ripd.c: Interoperability fix. Correct value for MD5 auth length
-	  is 16. Accept packets with this set to >= 16, and set to 16
-          ourselves.
-
-2004-05-31 Sowmini Varadhan <sowmini.varadhan@sun.com>
-
-	* ripd.c: Fixup compile warnings
-	* rip_routemap.c: Ditto
-	
-2004-05-08 Paul Jakma <paul@dishone.st>
-
-	* rip_zebra.c: sync with zclient changes.
-	* rip_interface.c: ditto.
-
-2004-05-05 Anthony.Golia@morganstanley.com
-
-	* ripd.c: (rip_update_jitter) Bound jitter to a more sensible
-	  value, eg 1/4 of update time.
-	  
-2004-05-03 Paul Jakma <paul@dishone.st>
-
-	* ripd.c: (rip_rte_process) fix typo in merge of previous patch
-	  and run function through indent.
-	
-2004-03-19 Jean-Yves Simon <lethalwp@tiscali.be>
-
-	* ripd.c: (rip_rte_process) make ripd also check on 
-	  administrative distance of his own links to update routes.
-
-2004-03-18 sowmini.varadhan@sun.com
-
-	* ripd.c: rip_send_packet can get null connected address when
-	  called in response to a unicast rip-request. Handle correctly.
-
-2004-03-03 Krzysztof Oledzki <oleq@ans.pl>
-
-	* ripd.c: fix "show ip rip" and per interface rip version selection.
-
-2004-01-23 sowmini.varadhan@sun.com
-
-	* rip_interface.c: obsolete unbind code in
-  	rip_interface_multicast_set, and instead do the more portable
-  	(though slower) method of creating a socket for each outgoing packet
-  	and binding the source address on the new socket.
-        * rip_interface.c, ripd.c, ripd.h: Modify rip_request_send so that
-        source address is determined by the caller of rip_request_send for
-        ripv1 packets and non-multicast interfaces (rip_request_send loops
-        over all connected address in all other cases).
-        * rip_send_packet: don't send packets with source set to
-        ZEBRA_IFA_SECONDARY connected addresses; improved debug messages;
-
-2003-06-07 Andrew J. Schorr <aschorr@telemetry-investments.com>
-
-	* Allow ripd to receive RIPv1
-	* add default as valid param to passive-interface command
-
-2003-05-25 Vincent Jardin <vjardin@wanadoo.fr>
-
-	* 6Wind patch merge.
-
-2003-04-19 Hasso Tepper <hasso@estpak.ee>
-
-	* rip_routemap.c: sync daemon's route-map commands to have same
-	syntax
-
-2002-07-07  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
-
-	* zebra-0.93 released.
-
-2002-06-30  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
-
-	* ripd.c (rip_output_process): When outgoing interface is same as
-	next hop interface, announce RIPv2 next hop otherwise set next hop
-	to 0.  Revert previous change then take 6WIND way.
-
-2001-09-14  Akihiro Mizutani <mizutani@dml.com>
-
-	* ripd.c: RIP enabled interface's route is advertised by default.
-
-2001-08-28  NOGUCHI Kay <kay@v6.access.co.jp>
-
-	* rip_snmp.c (rip_ifaddr_delete): Add route_node_lookup() return
-	value check.
-
-	* rip_interface.c (rip_multicast_leave): Fix bug of multiple IP
-	address on one interface multicast join/leave bug.
-
-2001-08-26  NOGUCHI Kay <kay@v6.access.co.jp>
-
-	* rip_interface.c (no_rip_passive_interface): Add NO_STR.
-
-2001-08-19  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
-
-	* zebra-0.92a released.
-
-2001-08-15  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
-
-	* zebra-0.92 released.
-
-2001-06-17  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_routemap.c (route_match_ip_address_prefix_list): Add match
-	ip next-hop prefix-list WORD.
-
-2001-02-18  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (rip_passive_interface_clean): Call
-	rip_passive_interface_apply_all.
-
-2001-02-12  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_response_process): Multicast address nexthop check
-	is moved from rip_nexthop_check.
-
-2001-02-08  Matthew Grant <grantma@anathoth.gen.nz>
-
-	* rip_interface.c (ipv4_multicast_join): Use
-	setsockopt_multicast_ipv4.
-	(ipv4_multicast_leave): Likewise.
-	(rip_if_ipv4_address_check): Interface which has IPv4 address can
-	be enabled.
-
-2001-02-08  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (rip_interface_delete): To support pseudo
-	interface do not free interface structure.
-	* ripd.c (rip_output_process): If output interface is in simple
-	password authentication mode, we need space for authentication
-	data.
-
-2001-02-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_nexthop_check): Fix multicast address nexthop check.
-
-	* zebra-0.91 is released.
-
-2001-01-27  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (show_ip_rip): Show metric infinity route's timeout.
-	(rip_rte_process): If current route is metric infinity, route is
-	replaced with received rte.
-	(rip_redistribute_delete): When redistribute route is deleted,
-	perform poisoned reverse.
-	(rip_redistribute_withdraw): Likewise.
-
-2001-01-25  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_response_process): RIPv2 routing table entry with
-	non directly reachable nexthop was dropped.  The code is changed
-	to treat it as 0.0.0.0 nexthop.
-	(rip_destination_check): Check net 0 address destination.
-	(rip_nexthop_check): New function for checking nexthop address
-	validity.
-
-2001-01-15  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_request_process): Triggered update only send changed
-	route.
-
-	* rip_interface.c: Delete RIP_API part until new implementation
-	comes out.
-
-	* rip_snmp.: Likewise.
-
-	* rip_zebra.c: Likewise.
-
-	* ripd.c: Likewise. 
-
-2001-01-11  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (rip_if_init): Remove HAVE_IF_PSEUDO part.
-
-2001-01-09  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* zebra-0.90 is released.
-
-2001-01-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.h (RIP_VTYSH_PATH): Change "/tmp/ripd" to "/tmp/.ripd".
-
-2000-12-25  David Lipovkov <davidl@nbase.co.il>
-
-	* ripd.c (rip_rte_process): When a route is in garbage collection
-	process (invalid with metric 16) and a router receives the same
-	route with valid metric then route was not installed into zebra
-	rib, but only into ripd rib. Moreover , it will never get into
-	zebra rib, because ripd wrongly assumes it's already there.
-	(rip_redistribute_add): When doing redistribute into rip other
-	route (e.g. connected) and the same route exists in ripd rib we
-	changed it in place - bug. Now we don't forget to remove old route
-	from zebra.
-	(rip_timeout): When removing routes from zebra I made sure that we
-	remove route with the metric we have in zebra and not the new
-	one. It doesn't make a difference now,but could be significant
-	when multipath support is done.
-
-2000-12-25  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_zebra.c (rip_metric_unset): Fix bug of metric value unset.
-
-2000-11-25  Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
-	* ripd.c (rip_request_process): Check passive flag of the
-	interface.
-
-2000-11-23  Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
-	* rip_interface.c (rip_multicast_join): When IP_ADD_MEMBERSHIP
-	failed do not set runnning flag to the interface.
-
-2000-11-16  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_output_process): Memory leak related classfull
-	network generation is fixed.
-
-2000-11-16  Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
-	* rip_interface.c (if_check_address): Obsolete pointopoint address
-	check is removed.
-
-2000-11-02  Frank van Maarseveen <F.vanMaarseveen@inter.NL.net>
-
-	* rip_interface.c (if_check_address): Add pointopoint address
-	check.
-	(rip_interface_up): Add check for passive interface when interface
-	goes up.
-
-2000-10-23  Jochen Friedrich <jochen@scram.de>
-
-	* rip_snmp.c: rip_oid and ripd_oid are used in smux_open after it
-	is registered.  So those variables must be static.
-
-2000-10-19  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c: Change to "no ip rip (send|receive)" command
-	accept version number argument.
-
-2000-10-17  Akihiro Mizutani <mizutani@dml.com>
-
-	* rip_routemap.c (route_set_ip_nexthop_compile): Change "match ip
-	next-hop" from IP address to access-list name.
-
-2000-10-17  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_peer.c: Change ot use linklist.c instaed of newlist.c.
-
-2000-10-16  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_offset.c: Change to use linklist.c instead of newlist.c.
-
-2000-10-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* zebra-0.89 is released.
-
-2000-09-26  Akihiro Mizutani <mizutani@dml.com>
-
-	* rip_routemap.c (match_ip_nexthop): Add next-hop format check.
-
-2000-09-18  David Lipovkov <dlipovkov@OpticalAccess.com>
-
-	* rip_interface.c (ripd_api_get_if_rx_version): Corrects rip SNMP
-	and rip API functions dealing with rip version.
-
-	* rip_snmp.c (Status_Valid): SNMPv2-TC TEXTUAL-CONVENTION.
-
-2000-09-10  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_snmp.c (rip2IfLookup): Use rip_ifaddr_lookup_next() instead
-	of rip_if_lookup_next().
-
-	* rip_interface.c (rip_enable_network_lookup): Interface enable
-	check by interface's address with /32 prefix.
-
-	* ripd.c (rip_read): When RIP is configured with authentication
-	and no authentication in incoming packet, drop the packet.
-
-	* rip_interface.c (rip_interface_reset): RIP_AUTH_SIMPLE_PASSWORD
-	is default mode of authentication.
-	(rip_interface_new): Likewise.
-	(no_ip_rip_authentication_mode): Likewise.
-
-	* ripd.c (rip_read): Likewise.
-
-2000-09-10  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_snmp.c: Set ASN_INTEGER v->type where it is needed.
-
-2000-09-08  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_auth_simple_password): Simple password
-	authentication using key-chain.
-	(rip_write_rte): Likewise.
-
-	* rip_interface.c (ip_rip_authentication_key_chain): Add check for
-	authentication string configuration.
-
-2000-09-08  Akihiro Mizutani <mizutani@dml.com>
-
-	* ripd.c (rip_write_rte): Add check for ri->auth_str.
-
-2000-09-07  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd_api.h: New file is added.
-
-2000-08-22  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_rte_process): rip_route_process() is renamed to
-	rip_rte_process() to clarify meanings of the function.
-	rip_route_process() is newly added to process RIP route selection.
-
-2000-08-18  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_incoming_filter): Extract incoming filter code to
-	function from rip_route_process(). Add check for all interface
-	filter.
-	(rip_outgoing_filter): Extract incoming filter code to function
-	from rip_output_process().  Add check for all interface filter.
-
-	* rip_zebra.c (rip_redistribute_clean): Reset redistribute status
-	when "no router rip" is performed.
-
-	* rip_interface.c (rip_interface_clean): Reset interface's RIP
-	enable status.
-
-2000-08-17  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_route_process): When metric infinity is received the
-	route is removed from service immediately.
-	(rip_timeout): Likewise.
-	(rip_garbage_collect): Do not delete route in garbage collection.
-	(rip_output_process): Check metric_out exceed metric infinity.
-
-	* zebra-0.88 is released.
-
-2000-08-15  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_distance_apply): Unlock node when there is matched
-	node.
-
-2000-08-13  Akihiro Mizutani <mizutani@dml.com>
-
-	* rip_routemap.c (match_ip_nexthop): Add check for IP address
-	validness.
-	(no_set_metric): Add new ALIAS.
-
-2000-08-07  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.h (struct rip ): Add distance.
-
-2000-08-05  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_zebra.c (rip_zebra_ipv4_add): Use new Zebra api to register
-	routes.  Pass RIP metric value to zebra.
-
-2000-08-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_main.c (main): Make struct thread thread from global
-	variable to local variable in main.
-
-2000-08-06  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_packet_dump): Add MD5 authentication dump function.
-	(rip_auth_md5): RIP MD5 authentication packet receive works.
-
-2000-08-02  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_interface.c (rip_if_init): Install interface "pseudo"
-	commands.
-	(rip_interface_delete): Do not call if_delete() when interface is
-	pseudo interface.
-
-2000-07-31  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (ip_rip_authentication_mode): "ip rip
-	authentication mode (md5|text)" is added.
-	(ip_rip_authentication_key_chain): "ip rip authentication
-	key-chain KEY-CHAIN" is added.
-	(rip_interface_clean): Clean all interface configuration.
-	(rip_interface_reset): Reset all interface configuration.
-	(rip_clean_network): Clean rip_enable_network.
-
-	* ripd.h (struct rip_interface): Add key_chain member.
-
-	* ripd.c: Include md5-gnu.h.
-
-2000-07-30  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.h (RIP_NO_AUTH): Change RIP_NO_AUTH value from 1 to 0.
-
-	* ripd.c (rip_authentication): Use RIP_AUTH_SIMPLE_PASSWORD
-	instead of raw value 2.
-	(rip_write_rte): Likewise.
-	(rip_write_rte): Check ri->auth_type instead of ri->auth_str.
-
-2000-07-30  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_interface.c (rip_if_down): Do not delete ZEBRA_ROUTE_KERNEL
-	route.
-
-2000-07-27  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_update_process): Add "passive-interface" command.
-
-	* ripd.h (struct rip_interface): Add passive member to struct
-	rip_interface.
-
-2000-07-24  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (rip_if_init): Multiple RIP routes for one
-	prefix change.  The codes are enclosed by #ifdef NEW_RIP_TABLE.
-
-2000-07-24  Akihiro Mizutani <mizutani@dml.com>
-
-	* rip_interface.c (rip_if_init): Use install_default() for
-	INTERFACE_NODE.
-
-2000-07-24  Kunihiro Ishiguro <kunihiro@zebra.org>
-
-	* ripd.c: First update timer will be invoked in two seconds.
-
-2000-07-09  Jochen Friedrich <jochen@scram.de>
-
-	* rip_snmp.c: Local function definitions to static.  Add INTEGER
-	ASN_INTEGER and TIMETICKS ASN_TIMETICKS definition.
-	(rip2PeerLookup): Peer with domain lookup implemented.
-	(rip2PeerTable): Temporary disable RIP2PEERLASTUPDATE value
-	support due to unknown SNMP agent startup time.
-
-2000-07-05  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.h: Sweep obsolete definitions.
-
-	* rip_interface.c (rip_split_horizon): Add "ip split-horizon"
-	command.
-
-	* ripd.c (rip_output_process): Remove split_horizon argument.
-	(rip_update_process): Likewise.
-
-	* ripd.h (struct rip_interface): Add split_horizon flag to struct
-	rip_interface.
-
-2000-07-04  Akihiro Mizutani <mizutani@dml.com>
-
-	* ripd.c (rip_version): Change VERSION to <1-2>.
-	Add "no version" command.
-
-2000-07-03  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_zebra.c (rip_redistribute_type_metric): "redistribute TYPE
-	metric <0-16>" command is added.
-
-	* rip_routemap.c (route_set_metric): Set metric_set when metric is
-	modified.
-
-	* ripd.h (struct rip_info): To check route-map set metric or not,
-	new member metric_set is added to struct rip_info.
-
-	* ripd.c (rip_route_process): Move metric handling code from
-	rip_response_process() to rip_route_process().
-	(rip_output_process): Set output offset-list metric.
-
-2000-07-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_offset.c (rip_offset_list): New file for offset-list.
-
-2000-07-02  Akihiro Mizutani <mizutani@dml.com>
-
-	* ripd.h (struct rip ): Add default_metric.
-
-	* ripd.c (rip_default_metric): "default-metric <1-16>" command is
-	added.
-	(config_write_rip): Change configuration order.
-	
-	* rip_zebra.c: Fix help strings.
-
-2000-07-02  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_interface.c (rip_if_init): Add IF_DELETE_HOOK.
-
-2000-07-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_output_process): If specified route-map does not
-	exist, it treated as deny all.
-
-2000-06-30  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_routemap.c (rip_route_map_init): Call rip_route_map_update
-	when route-map is deleted.
-
-2000-06-28  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_routemap.c (set_metric): For consistency with bgpd's set
-	metric, value range is set to <0-4294967295>.
-	
-2000-06-28  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_routemap.c (rip_route_map_update): Add check for rip is
-	enabled or not for avoid core dump.
-
-	* rip_debug.c (debug_rip_packet_direct): Fix bug of setting
-	rip_debug_packet flag.
-
-2000-06-13  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_interface.c (rip_interface_delete): All work is done in
-	rip_if_down().
-
-2000-06-06  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_redistribute_delete): Fix bug of missing
-	route_unlock_node() when redistribute route is not found.
-
-2000-06-05  Akihirof Mizutani <mizutani@dml.com>
-
-	* rip_debug.c (rip_debug_init): Disable show debugging in
-	VIEW_NODE like other protocol daemon.
-
-	* rip_routemap.c: Change command argument to more comprehensive.
-
-	METRIC       -> <0-16>
-	IFNAME       -> WORD
-	IP_ADDR      -> A.B.C.D
-	ACCSESS_LIST -> WORD
-
-2000-06-05  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_interface.c (rip_interface_delete): Delete all routes
-	include static and kernel through the interface , because even if
-	the interface is added again there is no guarantee that it will
-	get the same ifindex as before.
-
-2000-05-31  Akihirof Mizutani <mizutani@dml.com>
-
-	* rip_debug.c: Fix rip debug help string.
-
-2000-04-27  Mirko Karanovic <mkaranov@torsel.alcatel.com>
-
-	* rip_interface.c (rip_interface_down): Remove interface from
-	multicast group when interface goes down.
-
-2000-04-03  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_interface.c (rip_interface_down): Implemented rip functions
-	for interface up/down events: rip_interface_up() and
-	rip_interface_down()
-
-2000-03-16  David Lipovkov <davidl@nbase.co.il>
-
-	* rip_zebra.c (rip_zclient_init): Added rip functions for
-	interface up/down events.
-
-2000-02-15  Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
-
-	* ripd.c (rip_write_rte): "set metic" in route-map has no effect
-	for RIPv1 in ripd.  It worked fine for RIPv2.
-
-2000-01-17  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (show_ip_protocols_rip): Fix bug of "show ip protocls"
-	mis-display RIP version.
-
-	* ripd.h (struct rip_peer): Add timeout thread to rip_peer
-	structure.
-
-2000-01-16  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_peer.c: Add new file for supporting RIP peer.
-
-1999-12-26  David Lipovkov <davidl@nbase.co.il>
-
-	* ripd.c (rip_authentication): RIP authantication string is 16
-	bytes long.
-
-1999-12-10  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_read): Add check for minimum packet length.
-	Authentication check is moved from rip_process_response() to
-	rip_read().  Patch from David Lipovkov <davidl@nbase.co.il> is
-	applied then add rte number check by Kunihiro Ishiguro
-	<kunihiro@zebra.org>.
-
-1999-12-07  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_response_process): In case of packet is RIPv2 and
-	network is non zero and netmask is zero, apply netmask rule as
-	same as RIPv1.
-
-1999-11-06  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_timers): Fix bug of timers basic argument format.
-
-1999-11-03  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_snmp.c (rip2IfConfAddress): Forgot to include
-	RIP2IFCONFDOMAIN.
-
-1999-10-28  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.h (struct rip_peer): New structure added.
-
-1999-10-26  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_zebra.c (rip_zebra_ipv4_add): Increment
-	rip_global_route_changes when route change occur.
-	(rip_zebra_ipv4_delete): Likewise.
-
-	* ripd.c (rip_request_process): Increment rip_global_queries when
-	reply to the query is sent.
-
-1999-10-25  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_debug.c (rip_debug_reset): Reset function added.
-
-	* ripd.c (rip_update_process): Logging bug is fixed. 
-
-1999-10-10  Marc Boucher <marc@mbsi.ca>
-
-	* ripd.c (config_write_rip): Add config_write_distribute() call.
-
-1999-09-29  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_distribute_update): Fix bug of access-list
-	prefix-list updates.
-
-1999-09-10  VOP <vop@unity.net>
-
-	* rip_zebra.c: Add redistribute route-map feature.
-
-1999-09-10  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_response_process): Add check for given prefix is
-	given mask applied one.
-
-1999-09-03  VOP <vop@unity.net>
-
-	* rip_interface.c (rip_interface_multicast_set): Bug fix about
-	setting multicast interface.
-
-1999-09-02  VOP <vop@unity.net>
-
-	* rip_routemap.c: New file added.
-
-1999-09-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (show_ip_protocols_rip): Show next update time.
-	(show_ip_protocols_rip): Show redistribute information.
-
-1999-08-25  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* RIPv2-MIB.txt: New file added.
-
-	* rip_snmp.c: New file added.
-
-1999-08-24  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (ip_rip_authentication_string): RIPv2
-	authentication command is added.
-
-1999-08-23  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (rip_interface_multicast_set): Process of
-	setting IP_MULTICAST_IF on specific interface.
-
-	* ripd.c (rip_read): Add packet size check.
-
-1999-08-16  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_request_process): Fill in RIP_METRIC_INFINITY with
-	network byte order using htonl ().
-	(rip_response_process): Pass host byte order address to IN_CLASSC
-	and IN_CLASSB macro.
-
-1999-08-08  davidm@nbase.co.il (David Mozes)
-
-	* rip_zebra.c (rip_zebra_read_ipv4): Fix split horizon problem.
-
-1999-07-03  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_timer_set): Function added.
-
-1999-07-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_debug.c: New file added.
-	rip_debug.h: New file added.
-
-1999-07-01  Rick Payne <rickp@rossfell.co.uk>
-
-	* rip_zebra.c (zebra_init): Install standard commands to
-	ZEBRA_NODE.
-
-1999-06-01  David Luyer <luyer@ucs.uwa.edu.au>
-
-	* ripd.c (rip_process_route): Add support for RIP version 1.
-
-1999-05-29  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_zebra.c: Change to use lib/zclient.[ch].
-
-1999-05-20  Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
-	* ripd.c (rip_add_route): Change the existance route's metric check
-          to the condition specified by RFC2453. 
-	
-1999-05-17  Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
-	* ripd.c (rip_process_route): Add the if metric to the route metric.
-
-	* ripd.c (rip_add_route): Deleted add if metric to the route.
-
-1999-05-16  Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
-	* rip_interface.c (if_valid_neighbor): New function.
-
-	* ripd.c (rip_process_route): Added check whether the datagram
-	is from a valid neighbor.
-	
-1999-05-15  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_process_route): Set interface pointer to rinfo.
-
-1999-05-15  Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
-	* ripd.c (rip_check_address): Unicast and not net 0 or 127 check
-	added.
-
-1999-05-14  Stephen R. van den Berg <srb@cuci.nl>
-
-	* rip_main.c (signal_init): SIGTERM call sigint.
-	(sigint): Loggging more better message.
-
-1999-05-10  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_add_route): Fix previous route_unlock_node() chenge.
-
-	* rip_main.c (main): Change default zlog output to ZLOG_STDOUT for
-	debugging.
-
-1999-05-09  Patrick Koppen <koppen@rhrk.uni-kl.de>
-
-	* rip_interface.c (rip_request): Fix old semantics for fetching
-	connected address.
-
-	* ripd.c (rip_add_route): Update timer when the route is updated.
-
-1999-05-09  Carlos Alberto Barcenilla <barce@frlp.utn.edu.ar>
-
-	* rip_zebra.c (struct zebra): Add ridist_static, ridist_connect,
-	redist_rip, redist_ripng.  
-
-	* rip_zebra.c (zebra_create): Updated for current zebra method.
-
-	* ripd.c (rip_add_route): Add missing route_unlock_node().
-
-1999-05-03  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_add_route): Add metric check.  Reported by Carlos
-	Alberto Barcenilla <barce@frlp.utn.edu.ar>.
-
-1999-02-18  Peter Galbavy  <Peter.Galbavy@knowledge.com>
-
-	* syslog support added
-
-1998-12-13  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_announce_func): Apply new lib functions.
-
-1998-12-09  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (config_write_rip): Delete vector v argument.
-	* rip_zebra.c (config_write_zebra): Likewise.
-	* rip_interface.c (interface_config_write): Likewise.
-
-1998-09-07  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_announce.c (rip_rib_close): When ripd terminates delete all
-	added route.
-
-1998-09-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c: return read packet size.
-
-1998-05-18  Yamshita TAKAO  <jargon@lares.dti.ne.jp>
-
-	* ripd.h: Modify for compile on Solaris.
-
-1998-05-07  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c: DEFUN function return CMD_SUCCESS.
-		  change xmalloc to XMALLOC macro.
-	
-1998-05-03  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_main.c: change CONFDIR to SYSCONFDIR.
-
-1998-05-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* .cvsignore: added.
-
-1998-02-04  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (config_write_interface): correct ADVERTISE spell.
-
-	* rip_main.c (main): add usage() and make cleanup.
-
-1998-01-05  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* ripd.c (rip_version): add rip version command.
-
-1998-01-04  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* rip_interface.c (zebra_get_interface): added to get
-	interface's information.
-
-	* ChangeLog: create.