2005-06-15 Paul Jakma <paul.jakma@sun.com>

	* README.txt: updated to match changed SMF manifest and
	  its changed service, instance and property group names.

2 files changed, 116 insertions, 37 deletions

diff --git a/solaris/ChangeLog b/solaris/ChangeLog
index ab0c618e..17f516f0 100644
--- a/solaris/ChangeLog
+++ b/solaris/ChangeLog
@@ -17,6 +17,8 @@
 	  /var/run/ is on tmpfs on Solaris, so we probably will need
 	  to create @quagga_statedir@ first run after boot.
 	  Use @sbindir@, not /usr/local/sbin.
+	* README.txt: updated to match changed SMF manifest and
+	  its changed service, instance and property group names.
 	  
 2005-06-02 Paul Jakma <paul.jakma@sun.com>
 
diff --git a/solaris/README.txt b/solaris/README.txt
index 86295e0a..6dde5941 100644
--- a/solaris/README.txt
+++ b/solaris/README.txt
@@ -32,12 +32,12 @@ You will need /usr/sfw/bin and /usr/ccs/bin in your path.
 2. make install in the top-level build directory, it's a good idea to make
 use of DESTDIR to install to an alternate root, eg:
 
-	make DESTDIR=/var/tmp/qroot install
+	gmake DESTDIR=/var/tmp/qroot install
 
 3. In this directory, run make packages, specifying DESTDIR if appropriate,
 eg:
 
-	make DESTDIR=/var/tmp/qroot packages
+	gmake DESTDIR=/var/tmp/qroot packages
 
 This should result in 4 packages being created:
 
@@ -45,8 +45,10 @@ This should result in 4 packages being created:
 	quagga-daemons-...-$ARCH.pkg	- QUAGGAdaemons
 	quagga-doc-...-$ARCH.pkg	- QUAGGAdoc
 	quagga-dev-...-$ARCH.pkg	- QUAGGAdev
+	quagga-smf-...-$ARCH.pkg	- QUAGGAsmf
 
-QUAGGAlibs and QUAGGAdaemons are needed for daemon runtime.
+QUAGGAlibs and QUAGGAdaemons are needed for daemon runtime. QUAGGAsmf
+provides the required bits for Solaris 10+ SMF support.
 
 
 Install and post-install configuration notes:
@@ -67,40 +69,115 @@ Install and post-install configuration notes:
   other user should have read permissions, and you would also have to enable
   the telnet interface (see below).
 
-- Configuration of common options are by way of SMF properties named Quagga,
-  the defaults should be inline with how you configured Quagga in Step 1
-  above, eg:
-
-	Quagga/config_file astring /usr/local/quagga/etc/zebra.conf
-	Quagga/daemon_name astring zebra
-	Quagga/group astring quagga
-	Quagga/pid_file astring /var/run/quagga/zebra.pid
-	Quagga/stability astring Evolving
-	Quagga/user astring quagga
-	Quagga/vty_addr astring 127.1
-	Quagga/vty_port integer 0
-
-  Note that by default the telnet 'vty' interface is disabled -
-  Quagga/vty_port is set to 0. Other daemon-specific options may be
-  available, however they are not yet honoured/used (eg ospfd/apiserver on
-  svc:/network/ospf).
-
-  You can change these properties with the 'svccfg' SMF utility, eg:
-
-	# svccfg 
-	svc:> select svc:/network/zebra
-	svc:/network/zebra> listprop Quagga/vty_port
-	Quagga/vty_port  integer  0
-	svc:/network/zebra> setprop Quagga/vty_port = 2601
-	svc:/network/zebra> listprop Quagga/vty_port
-	Quagga/vty_port  integer  2601
-	svc:/network/zebra> quit
-	# svcprop -p Quagga/vty_port network/zebra
-	2601
-
-  As SMF is dependency aware, restarting network/zebra will restart all the
-  other daemons.
-
+- SMF notes:
+
+  - QUAGGAsmf installs a svc:/network/routing/quagga service, with an
+    instance for each daemon
+  
+  - The state of all instances of quagga service can be inspected with:
+  
+  	svcs -l svc:/network/routing/quagga
+  
+    or typically just with a shortcut of 'quagga':
+    
+    	svcs -l quagga
+  
+  - A specific instance of the quagga service can be inspected by specifying
+    the daemon name as the instance, ie quagga:<daemon>:
+    
+    	svcs -l svc:/network/routing/quagga:zebra
+    	svcs -l svc:/network/routing/quagga:ospfd
+    	<etc>
+
+    or typically just with the shortcut of 'quagga:<daemon>' or even
+    <daemon>:
+    
+    	svcs -l quagga:zebra
+    	svcs -l ospfd
+    
+    Eg:
+    
+    # # svcs -l ripd
+    fmri         svc:/network/routing/quagga:ripd
+    name         Quagga: ripd, RIPv1/2 IPv4 routing protocol daemon.
+    enabled      true
+    state        online
+    next_state   none
+    state_time   Wed Jun 15 16:21:02 2005
+    logfile      /var/svc/log/network-routing-quagga:ripd.log
+    restarter    svc:/system/svc/restarter:default
+    contract_id  93 
+    dependency   require_all/restart svc:/network/routing/quagga:zebra (online)
+    dependency   require_all/restart file://localhost//usr/local/quagga/etc/ripd.conf (online)
+    dependency   require_all/none svc:/system/filesystem/usr:default (online)
+    dependency   require_all/none svc:/network/loopback (online)
+
+  - Configuration of startup options is by way of SMF properties in a
+    property group named 'quagga'. The defaults should automatically be
+    inline with how you configured Quagga in Step 1 above. 
+  
+  - By default the VTY interface is disabled. To change this, see below for
+    how to set the 'quagga/vty_port' property as appropriate for
+    /each/ service. Also, the VTY is set to listen only to localhost by
+    default, you may change the 'quagga/vty_addr' property as appropriate
+    for both of the 'quagga' service and specific individual instances of
+    the 'quagga' service (ie quagga:zebra, quagga:ospfd, etc..).
+    
+  - Properties belonging to the 'quagga' service are inherited by all
+    instances. Eg:
+    
+    # svcprop -p quagga svc:/network/routing/quagga
+    quagga/group astring root
+    quagga/retain boolean false
+    quagga/user astring root
+    quagga/vty_addr astring 127.1
+    quagga/vty_port integer 0
+    
+    # svcprop -p quagga svc:/network/routing/quagga:ospfd
+    quagga/retain_routes boolean false
+    quagga/group astring root
+    quagga/retain boolean false
+    quagga/user astring root
+    quagga/vty_addr astring 127.1
+    quagga/vty_port integer 0
+    
+    All instances will inherit these properties, unless the instance itself
+    overrides these defaults. This also implies one can modify properties of
+    the 'quagga' service and have them apply to all daemons.
+    
+    # svccfg -s svc:/network/routing/quagga \
+    	setprop quagga/vty_addr = astring: ::1
+    
+    # svcprop -p quagga svc:/network/routing/quagga
+    quagga/group astring root
+    quagga/retain boolean false
+    quagga/user astring root
+    quagga/vty_port integer 0
+    quagga/vty_addr astring ::1
+    
+    # # You *must* refresh instances to have the property change
+    # # take affect for the 'running snapshot' of service state.
+    # svcadm refresh quagga:ospfd
+    
+    # svcprop -p quagga svc:/network/routing/quagga:ospfd
+    quagga/retain_routes boolean false
+    quagga/group astring root
+    quagga/retain boolean false
+    quagga/user astring root
+    quagga/vty_port integer 0
+    quagga/vty_addr astring ::1
+    
+    Other daemon-specific options/properties may be available, however they
+    are not yet honoured/used (eg ospfd/apiserver on svc:/network/ospf).
+
+  - As SMF is dependency aware, restarting network/zebra will restart all the
+    other daemons.
+  
+  - To upgrade from one set of Quagga packages to a newer release, one must
+    first pkgrm the installed packages. When one pkgrm's QUAGGAsmf all
+    property configuration will be lost, and any customisations will have to
+    redone after installing the updated QUAGGAsmf package.
+  
 - These packages are not supported by Sun Microsystems, report bugs via the
   usual Quagga channels, ie Bugzilla. Improvements/contributions of course
   would be greatly appreciated.