[trivia] Remove ChangeLog files, as this data is now maintained in SCM

1 files changed, 0 insertions, 164 deletions

diff --git a/solaris/ChangeLog b/solaris/ChangeLog
deleted file mode 100644
index 65135d99..00000000
--- a/solaris/ChangeLog
+++ /dev/null
@@ -1,164 +0,0 @@
-2008-07-03 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.{xml,init}.in: Sync with OpenSolaris SFW. This changes the
-	  SMF schema used, from the SMF schema supplied initially with
-	  Quagga, to the version which was approved by the Sun PSARC for
-	  inclusion into Solaris. This change is incompatible. Settings,
-	  such as vty_port, etc. will not transfer over. The Sun schema is
-	  however supported by Sun, and supports running Quagga in a zone
-	  with IP instances, and configuration via the routeadm utility.
-
-2008-01-13 Paul Jakma <paul.jakma@sun.com>
-
-	* Makefile.am: pkg target should depend on the 'depend.%' files.
-	  Crops up now that solaris/ doesn't get descended into by
-	  general Quagga build.
-
-2007-02-22 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.{xml,init}.in: Add licence boilerplate to ensure
-	  licence terms are clear.
-
-2006-04-03 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.xml.in: oops, ipvX-routing services don't exist yet in
-	  any Solaris builds.
-
-2006-03-16 Paul Jakma <paul.jakma@sun.com>
-
-	* prototype.smf.in: Oops, continue to install manifest to
-	  var/svc/manifest/network for now.
-
-2006-03-13 Alan Maguire <alan.maguire@sun.com>
-
-	* quagga.xml.in: Change the naming of services and instances.
-	  network/routing/quagga:<daemon> may be neat and tidy, but
-	  it's at odds with SMF convention elsewhere that demands
-	  the service be named for what it does, and the instance name
-	  describe the implementation (e.g. network/smtp:sendmail).
-	  Remove call to method script for 'stop', SMF can do that
-	  itself.
-	  Enumerate the privileges required in the SMF manifest, with the
-	  method_credential element.
-	  Dont try provide seperate properties for each argument, it's
-	  just tedious, particularly when they can no longer be
-	  inherited from a common quagga service - use a single
-	  "daemon-args" property, defaulting to -P 0.
-	  Specify authorisation for the 'routeadm' utility and for
-	  RBAC.
-
-2006-03-13 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.init.in: Update to match SMF manifest changes.
-	  If run from an SMF environment, assume method is start.
-	  Offer a more tradition init script interface for pre-SMF.
-	  Enable zebra for the link-state daemons.
-	  Don't allow daemons to start in non-global zones, except
-	  for bgpd - it doesn't have to care about underlying
-	  networking much.
-	  Remove all the svcprop calls, SMF or the user will supply any
-	  arguments on the command-line.
-	* depend.smf.in: Add dependency on SUNWroute, which provides
-	  routeadm, which provides /var/svc/manifest/network/routing
-	* prototype.smf.in: Install manifest to 
-	  var/svc/manifest/network/routing.
-
-2006-02-19 Paul Jakma <paul.jakma@sun.com>
-
-	* depend.*: renamed to depend.*.in.
-	* depend.*.in: Add version dependency.
-	* Makefile.am: Generate depend.* from depend.*.in
-	  Distribute the depend.*.in files rather than the depend.*
-	  files.
-	* quagga.init.in: Enable zebra if one of the link-state
-	  daemons is started.
-	  Restart method is not required - SMF handles that.
-	* quagga.xml.in: Remove restart method details.
-
-2005-11-04 Paul Jakma <paul.jakma@sun.com>
-
-	* prototype.dev.in: lib/md5-gnu.h is now lib/md5.h
-
-2005-08-16 Paul Jakma <paul.jakma@sun.com>
-
-	* README.txt: point to the opensolaris.org sources for the SMF 
-	  manifest class scripts. Make step 3 slightly more explicit about
-	  what 'this directory' is.
-	  
-2005-06-15 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.xml.in: Pass the FMRI to the method, removing need for
-	  daemon_name property and deducing the FMRI.
-	  remove the empty config_file and pid_file definitions, they just
-	  make things difficult in the method script, cause it then has to
-	  deal with svcprop returning "" for defined empty properties.
-	  Remove daemon_name everywhere.
-	* quagga.init.in: Take the FMRI as an argument
-	  Remove deducing the FMRI from the defunct daemon_name property.
-	  Use svcprop -q to test for presence of a property first.
-	  Default vty_port to 0 and vty_addr to 127.1 if equivalent
-	  SMF properties are not set.
-	  Deduce the pid_file, we can infer it from @quagga_statedir@ I
-	  think, it's probably not useful to allow it to be configurable
-	  as a property anyway.
-	  /var/run/ is on tmpfs on Solaris, so we probably will need
-	  to create @quagga_statedir@ first run after boot.
-	  Use @sbindir@, not /usr/local/sbin.
-	* README.txt: updated to match changed SMF manifest and
-	  its changed service, instance and property group names.
-	  
-2005-06-02 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.xml.in: Fix mistake in bgpd definition. Change dependency
-	  on zebra to optional. Remove the duplicated stability statements.
-	* quagga.init.in: svcprop should check PACKAGE_TARNAME, not _NAME.
-	  no need to check for config file either, there's already a
-	  dependency in the manifest.
-
-2005-05-13 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.xml.in: Sigh, XML child elements are order-sensitive.
-	* prototype.doc.in: info/dir doesnt get created always.. comment
-	  out for now, likely needs to be done with an install method.
-	* prototype.daemons.in: Move the Solaris 10 SMF specific stuff to
-	  a seperate package.
-	* depend.smf: dependencies for smf package
-	* pkginfo.smf.tmpl.in: pkginfo for smf
-	* prototype.smf.in: prototype for smf
-	* Makefile.am: Add smf to pkg_names
-	  
-2005-04-26 Paul Jakma <paul.jakma@sun.com>
-
-	* quagga.xml.in: New, better, single integrated manifest for all
-	  the services, courtesy of alan.maguire@sun.com.
-	* {{ospf,ospf6,rip,ripng,bgp}d,zebra}.xml.in: removed due to
-	  previous
-	* quagga.init.in: Use the package tarname for properties, use
-	  the correct daemon name variable.
-	* Makefile.am: Updated to match single manifest
-	* prototype.daemons.in: ditto
-
-2005-04-21 Paul Jakma <paul.jakma@sun.com>
-
-	* Makefile.am: pkginfo.%.tmpl is a generated file, srcdir prefix
-	  is not appropriate.
-
-2005-04-13 Paul Jakma <paul.jakma@sun.com>
-
-	* Makefile.am: {i,r}.manifest are (or will be) system provided files
-	  and not in CVS, hence dont depend on them or distribute them.
-
-2005-04-11 Paul Jakma <paul.jakma@sun.com>
-
-	* (all) Initial check-in of files for building S10 packages
-	* protototype.*.in: package prototype files for SysV packages
-	* *.xml.in: SMF manifests for Quagga daemons
-	* pkginfo.*.tmpl.in: daemon specific pkginfo, refererenced
-	  by prototype files.
-	* pkginfo.tmpl.in: Quagga common pkginfo bits
-	* quagga.init.in: SMF method script
-	* Makefile.am: Automake file for building packages
-	* depend.*: Solaris 10 dependencies for packages, referenced by
-	  prototype files.
-	* .cvsignore: Add built files
-	* README.txt: new file, package creation, install, usage notes.