[trivia] Remove ChangeLog files, as this data is now maintained in SCM

1 files changed, 0 insertions, 500 deletions

diff --git a/vtysh/ChangeLog b/vtysh/ChangeLog
deleted file mode 100644
index af55c6f2..00000000
--- a/vtysh/ChangeLog
+++ /dev/null
@@ -1,500 +0,0 @@
-2008-07-03 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
-
-	* extract.pl.in: Fix as-range to match CPP output.
-	* vtysh.c: Add missing router_bgp_view_cmd alias.
-
-2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
-
-	* CMD_AS_RANGE was being used inside command strings, and thus
-	  not being expanded, fix by dequoting.
-
-2007-06-20 Nicolas Deffayet <nicolas@deffayet.com>
-
-	* vtysh.c: (vtysh_write_terminal) Write 'end' when done,
-	  to be consistent with telnet vty, and expected by tools
-	  like rancid.
-
-2007-05-01 David L Stevens <dlstevens@us.ibm.com>
-
-	* vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and
-	  plist
-	* vtysh/Makefile.am: added zebra_routemap.c
-	* vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP
-
-2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* vtysh.c: (vtysh_log_timestamp_precision,
-	  no_vtysh_log_timestamp_precision) Implement new log timestamp
-	  precision commands: send to all daemons.
-	  (vtysh_init_vty) Install new log timestamp precision commands.
-
-2007-02-12 Juergen Kammer <j.kammer@eurodata.de>
-	* extract.pl: AS4 compatibility for router bgp ASNUMBER
-	* extract.pl.in: AS4 compatibility for router bgp ASNUMBER
-	* vtysh.c: AS4 compatibility for router bgp ASNUMBER
-
-2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* vtysh_main.c: (usage) Add new -d and -E options.  And note that
-	  -c can be used multiple times, possibly with embedded linefeeds.
-	  (longopts) Add new -d and -E options.
-	  (main) Add new -d and -E options, and create a linked list to
-	  support multiple -c options.  Do not call vtysh_connect_all until
-	  after vtysh_read_config(config_default) and vtysh_auth have
-	  succeeded.  This prevents the vtysh.conf file from configuring
-	  any daemons, and it ensures that authentication has been passed
-	  before we send any commands to any daemons.  Call vtysh_connect_all
-	  with any daemon name supplied with -d.  If it is unable to connect
-	  to any daemons, issue an error message and exit immediately.
-	  When used in -c mode, call vtysh_execute("enable") before
-	  executing the commands in order to match interactive behavior. 
-	  And detect embedded linefeed chars in -c commands and break them up
-	  appropriately.
-	* vtysh.h: (vtysh_connect_all) Fix proto to reflect new
-	  daemon_name argument, and that it now returns an integer -- the
-	  number of daemons to which we were able to connect.
-	* vtysh.c: (vtysh_connect_all) Add a new daemon_name argument.
-	  If supplied, connect only to that daemon.  And return
-	  the number of daemons to which we were able to connect.
-	  (vtysh_prompt): Performance enhancement -- make struct utsname
-	  static so we call uname to get the hostname only once.
-
-2006-05-24 Paul Jakma <paul.jakma@sun.com>
-
-	* vtysh.c: (general) Add 'show memory' command.
-
-2006-05-21 Paul Jakma <paul.jakma@sun.com>
-
-	* vtysh.c: (vtysh_show_logging_cmd) Suppress output for daemons
-	  which are not running (Andrew Schorr).
-
-2006-05-17 Paul Jakma <paul.jakma@sun.com>
-
-	* vtysh.c: (general) Add 'show logging' command.
-
-2006-01-11 Erik Smit <zoiah@zoiah.net>
-
-	* vtysh.c: (vtysh_config_from_file) fix regression from
-	  a previous cleanup, vtysh_client.flags and cmd->daemon are
-	  bitwise flags, bitwise & was meant to be used. Fixes breakage
-	  of integrated config file reading.
-
-2005-09-15 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c: Fix warning by casting rl_bind_key 2. argument correctly.
-	* extract.pl.in: Fix warning - add isisd/topology to the includes.
-
-2005-08-22 Hugo Santos <hsantos@av.it.pt>
-
-	* vtysh.c: Add support for BGP_IPV6M_NODE
-	
-2005-07-12 Christian Hammers <ch@debian.org>
-
-	* vtysh_user.c: rename struct user to struct vtysh_user to avoid
-	  clashes with sys/user.h on Linux/ARM.
-
-2005-04-07 Hasso Tepper <hasso at quagga.net>
-
-	* Makefile.am: Remove rebuild4 target, it's not used any more by build
-	  procedure. Define vtysh_cmd_FILES. Use EXTRA_DIST.
-	* extract.pl.in: Ignore "router zebra".
-
-2005-03-28 Hasso Tepper <hasso at quagga.net>
-
-	* extract.pl.in: Use SNMP_INCLUDES to avoid warnings if compiling with
-	  snmp support.
-
-2005-03-09 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh_config.c: Move password commands to the AAA_NODE. It
-	  quarantees that they will appear after SERVICE_NODE to make sure
-	  that encrypted passwords will work ("service password-encryption"
-	  command).
-
-2005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* vtysh.h: Remove obsolete VTYSH_INDEX_* defines.  Fix many prototypes
-	  for functions with no arguments (must specify argument list as void).
-	* vtysh.c: Enhance vtysh_client array to include the daemon's name
-	  and bitmask and socket path (in addition to the fd).  This allows
-	  us to use loop constructs for various operations that need to be
-	  applied to all client daemons, and it facilitates better error
-	  messages.  Also fix some prototypes with void argument lists.
-	  (vclient_close) Issue a warning message indicating which daemon's
-	  socket is being closed.
-	  (vtysh_execute_func,vtysh_config_from_file) Use a for loop to
-	  call vtysh_client_execute.
-	  (vtysh_write_terminal,write_config_integrated) Use a for loop to
-	  call vtysh_client_config.
-	  (vtysh_write_memory) Use a for loop to call vtysh_client_execute.
-	  (vtysh_show_daemons) Use a for loop.
-	  (vtysh_connect) The struct vtysh_client is now statically initialized,
-	  so do not initialize it here.
-	  (vtysh_connect_all) Use a for loop to call vtysh_connect.  Set
-	  ripd_client pointer for use in vtysh_exit_ripd_only.
-
-2005-01-23 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.conf.sample: Fix typo "integrated-vtysh-conf" ->
-	  "integrated-vtysh-config".
-	* vtysh/vtysh.c: Implement walkup in node tree for vtysh as it
-	  already works in vty.
-
-2005-01-10 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c: Reflect changes in lib. cmd_execute_command() should know
-	  now that it's called from vtysh and must not attempt to walk up in
-	  the node tree.
-
-2004-12-22 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh_config.c: No delimiter between "ip forwarding" and "ipv6
-	  forwarding". Show common router-id before router nodes. Fix router
-	  bgp node parsing. Move debug commands into debug node and no
-	  delimiter between lines there.
-
-2004-12-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* vtysh.c: (vtysh_connect) No reason to call geteuid and getegid,
-	  the results were never used.
-
-2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* vtysh.c: Make several functions static instead of global.
-	  Added several commands to support destination-specific logging levels.
-	  (vtysh_completion) This function is unused, so comment it out.
-
-2004-11-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
-	* vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing
-	  '\0' chars and command return code.
-
-2004-10-28 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c: "show running-daemons" broke users habits who are using
-	  "sho run" to view running configuration. Changed it to "show
-	  daemons". 
-
-2004-10-20 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c: Don't popen pager if command is "exit". Fixes "vtysh screws
-	  up my terminal if I exit" issue.
-
-2004-10-13 Hasso Tepper <hasso at quagga.net>
-
-	* extract.pl.in: All daemons can use both IPv6 and IPv4 access lists
-	  to limit access to vty.
-
-2004-10-11 Paul Jakma <paul@dishone.st>
-
-	* vtysh.c: (vtysh_client_execute) fix the sync fix. The 4th and
-	  final sync byte is not ASCII NULL, it's actually a status integer,
-	  and only ASCII NULL if CMD_SUCCESS is returned by daemon.
-	  Fix pointed out by Hasso.
- 
-2004-10-11 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c, vtysh_user.c: Make more strings const.
-	
-2004-10-07 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c, vtysh.h, vtysh_config.c, vtysh_main.c: Fix compiler
-	  warnings: make strings const, signed -> unsigned, remove unused
-	  variables.
-	* vtysh_config.c: Fix crash introduced with previous patch.
-
-2004-10-03 Hasso Tepper <hasso at quagga.net>
-
-	* vtsyh_main.c: Enter into enable node by default. Disable node doesn't
-	  make sense if we don't have any authentication for enable.
-	* vtysh.c: Implement "show running-daemons" command.
-	* vtysh.c: Use either integrated conf or daemon conf not both. Move
-	  configuration command into "service" level.
-	* vtysh.c: Remove "write ..." commands from other nodes than enable.
-	  We have "do ..." extension for that.
-	* vtysh_config.c, vtysh.c: Integrate vtysh configuration into
-	  integrated one.
-	* vtysh_config.c: Use FORWARD_NODE and SERVICE_NODE vty nodes.
-	* vtysh_config.c: Make "service" lines unique in integrated config.
-	* vtysh.c: Make "service password-encryption" command work in vtysh.
-	* vtysh_config.c, vtysh.c, Makefile.am, extract.pl.in: Introduce line
-	  vty commands in vtysh. Parse lib/vty.c for commands, but ignore
-	  commands that don't make sense in vtysh. Closes Bugzilla #104.
-	* vtysh.c: Make "[enable] password" commands work in vtysh. Behavior
-	  is similar to "log" commands - vtysh just passes commands to all
-	  daemons.
-	* vtysh_main.c, vtysh_config.c, vtysh.h: Remove any code dealing with
-	  configuration files specified from command line. We read/write files
-	  from/to system location only (ie. remove -f again).
-	* Makefile.am: Parse zebra/router-id.c.
-
-2004-09-26 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c: Fix compiler warning.
-
-2004-09-17 Paul Jakma <paul@dishone.st>
-
-	* vtysh.c: (vtysh_client_execute) trailling NULLs can be arbitrarily
-          split across reads, dont get confused by this and block forever.
-
-2004-09-13 Paul Jakma <paul@dishone.st>
-
-	* Makefile.am: extract.pl isnt in srcdir, it's always in the builddir.
-	  remove zebra/irdp.c from list - dead.
-	* extract.pl.in: match on end of filenames, filename could contain
-          various preamble due to out of tree builds. Substitute in the
-	  autoconf srcdir/builddir paths for includes to cpp.
-
-2004-08-28 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh_main.c: Rename signal handling functions not to conflict
-	  with functions from lib/sigevent.c.
-
-2004-08-27 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c: Make "terminal length <0-512>" command work in vtysh.
-
-2004-08-27 Hasso Tepper <hasso at quagga.net>
-
-	* vtysh.c: Enable using ssh from ENABLE_NODE.
-	* vtysh_config.c: Make enable password uniq lines appear only once in
-	  configuration.
-	* vtysh_main.c, vtysh_config.c, vtysh.h: Remove useless code which
-	  searched configuration files from current directory. Add -f to
-	  specify conf from command line.
-
-2004-08-26 Hasso Tepper <hasso at quagga.net>
-
-	* *.c: Cosmetical changes - strip long lines, fix multiline comments
-	  style, indentation fixes, remove useless comments.
-	* vtysh.h: define VTYSH_INTERFACE.
-	* vtysh.c: Use VTYSH_INTERFACE where possible. Added some related TODO
-	  items.
-	* vtysh.c: Move things around a little to reduce spaghetti mess.
-	* Makefile.am: Parse only needed files from zebra daemon while
-	  building vtysh_cmd.c file to supress warnings.
-
-2004-06-30  Greg Troxel  <gdt@poblano.ir.bbn.com>
-
-	* extract.pl.in: Rename from extract.pl, with @PERL@.
-
-	* Makefile.am: Add vtysh_cmds.c to CLEANFILES.
-
-2004-06-20 Hasso Tepper <hasso@estpak.ee>
-
-	* extract.pl: Zebra daemon has access lists as well.
-
-2004-05-10 Hasso Tepper <hasso@estpak.ee>
-
-	* vtysh.c: Workaround for most hated vtysh bug - Bugzilla #58.
-
-2004-04-06 Hasso Tepper <hasso@estpak.ee>
-
-	* vtysh_main.c: Don't save command to history if last command already
-	  there is same.
-	* vtysh_main.c: Replace -e with -c.
-	* vtysh_main.c: Fix help.
-
-2004-03-04 Hasso Tepper <hasso@estpak.ee>
-
-	* vtysh.c: Remove using PAGER.
-
-2004-01-15 Paul Jakma <paul@dishone.st>
-
-	* vtysh_config.c: Fix up strlen to use correct string.
-	
-2003-12-23 Hasso Tepper <hasso@estpak.ee>
-  
-	* Makefile.am extract.pl vtysh.c vtysh.h vtysh_config.c:
-	  isisd integration to vtysh.
-
-2003-05-01 Sergiy Vyshnevetskiy <serg@vostok.net>
-
-	vtysh.c: Program shouldn't terminate on pager execution failure
-	vtysh_user.c: configure support for openpam (freebsd5.0)
-
-2003-04-19 Hasso Tepper <hasso@estpak.ee>
-
-	* extract.pl vtysh.c vtysh.h: sync daemon's route-map commands to
-	have same syntax
-
-2002-09-30 Paul Jakma <paulzebra@rs250.org>
-	
-	* vtysh.c: add 'write-config (integrated|daemon)' option
-	to specifiy whether write config commands should write
-	integrated Zebra.conf file and/or per daemon files.
-	Defaults to per daemon, unless this is turned off.
-
-2002-07-07  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
-
-	* zebra-0.93 released.
-
-2001-08-19  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
-
-	* zebra-0.92a released.
-
-2001-08-15  Kunihiro Ishiguro  <kunihiro@ipinfusion.com>
-
-	* zebra-0.92 released.
-
-2001-02-20  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (vtysh_client_config): Do not set bufsz to 120.
-	Suggested by: Matthew Grant <grantma@anathoth.gen.nz>.
-
-2001-02-15  Hideto Yamakawa <yamakawa@dml.com>
-
-	* vtysh.c (vtysh_client_execute): Call fflush after fprintf.
-
-	* vtysh_config.c (vtysh_config_dump): Use VTYSH_PAGER if defined.
-
-2001-02-14  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (vtysh_execute_func): Add fflush before pclose.
-
-2001-02-10  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c: VTY shell pager name.  When environment variable
-	VTYSH_PAGER is defined, use it as VTY shell pager.
-
-2001-02-09  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (vtysh_execute_func): Add pager argument for test of
-	pager invocation.
-
-2001-02-08  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* extract.pl: Add -DHAVE_CONFIG_H option to cpp.
-
-2001-02-08  Matthew Grant <grantma@anathoth.gen.nz>
-
-	* vtysh.c (vtysh_client_config): Use sysconf to determine output
-	buffer size.
-	(vtysh_write_memory): Set umask 0077.
-	(vtysh_connect): Check permission to the socket.
-
-2001-02-01  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* zebra-0.91 is released.
-
-2001-01-31  Michael Rozhavsky <mrozhavsky@opticalaccess.com>
-
-	* vtysh.c (new_completion): Fix problem of appending space when
-	completion is executed.
-
-2001-01-23  Akihiro Mizutani <mizutani@dml.com>
-
-	* vtysh.c (vtysh_write_terminal): "write terminal" to all node.
-
-2001-01-15  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (vtysh_execute): Fix unconditional lock by other VTY.
-	Suggested by Hideto Yamakawa <yamakawa@dml.com>.
-
-2001-01-09  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* zebra-0.90 is released.
-
-2001-01-07  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.h (ZEBRA_PATH): Fix new vtysh path.  Reported by "Matt
-	Ranney" <mjr@ranney.com>
-
-2000-11-06  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (DEFUNSH): Add "address-family vpnv4" DEFUNSH.
-
-2000-10-23  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (execute_command): Add two arguemnt support for
-	executing child process.
-	(vtysh_telnet_port): New command "telnet WORD PORT" is added.
-
-2000-10-23  Akihiro Mizutani <mizutani@dml.com>
-
-	* vtysh.c (vtysh_write_memory): Display [OK] when configuration is
-	saved without problem.
-
-2000-10-20  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (vtysh_config_from_file): "key chain" command with -b
-	flag problem is fixed.
-
-2000-10-17  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh_user.c: Change to use linklist.c.
-
-2000-10-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* Makefile.am (noinst_HEADERS): Add vtysh_user.h.
-
-	* zebra-0.89 is released.
-
-2000-09-22  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh_main.c: Declare thread master.
-
-2000-08-25  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh_main.c (main): Add missing --help procudure.  Reported by
-	Patrick Rother <krd@roka.net>.
-
-2000-08-22  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (DEFUNSH): "interface IFNAME" works.
-
-2000-08-20  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh_user.c: Change name from vtysh_pam.c.
-
-	* vtysh.conf.sample: New file for vtysh configuration.
-
-2000-08-19  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh_pam.c (vtysh_pam): New file for PAM.
-
-2000-08-17  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* zebra-0.88 is released.
-
-2000-08-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* Makefile.am (vtysh_LDADD): Remove -lreadline and -lncurses.
-
-	* vtysh.c (vtysh_connect): Use AF_UNIX instead of AF_LOCAL for
-	backward compatibility.
-
-2000-07-09  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* extract.pl: Change regexp to match DEFUN and ALIAS at the same
-	time.
-
-2000-07-05  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (signal_init): Ignore SIGPIPE signal.
-
-2000-07-04  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* extract.pl: ALIAS command can be extracted by extract.pl.
-
-2000-07-03  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* extract.pl: Fix scalar and array semantics.
-
-	* vtysh.c (vtysh_telnet): Add "telnet" client command.
-
-2000-07-02  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c (main): Add -e flag for passing command from arugment.
-	(vtysh_ping): Add "ping" command for test of command execution.
-	(init_node): Add "traceroute" command.
-	(vtysh_start_shell): Add "start-shell", "start-shell bash",
-	"start-shell zsh".
-	(sigint): Add check for execute_flag for avoid duplicate prompt.
-
-2000-06-28  Kunihiro Ishiguro  <kunihiro@zebra.org>
-
-	* vtysh.c: New file for vty shell.
-	* vtysh.h: Likewise.
-	* extract.pl: Likewise.
-	* vtysh_cmd.c: Generate by extract.pl.