summaryrefslogtreecommitdiff
path: root/doc/ChangeLog
diff options
context:
space:
mode:
Diffstat (limited to 'doc/ChangeLog')
-rw-r--r--doc/ChangeLog510
1 files changed, 0 insertions, 510 deletions
diff --git a/doc/ChangeLog b/doc/ChangeLog
deleted file mode 100644
index 5fcb195b..00000000
--- a/doc/ChangeLog
+++ /dev/null
@@ -1,510 +0,0 @@
-2007-07-31 Paul Jakma <paul.jakma@sun.com>
-
- * bgpd.texi: Document 'network ... pathlimit <ttl>'
-
-2007-05-01 David L Stevens <dlstevens@us.ibm.com>
-
- * main.texi: added route-map, prefix-list, ip protocol
- and set src documentation
-
-2007-04-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * ospfd.texi: Add a paragraph to the description of the OSPFv2
- network command to explain how we handle interfaces with
- peer addresses.
-
-2007-04-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * basic.texi: Document the new 'log timestamp precision' command.
-
-2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * Makefile.am: Patch rule for draft-zebra-00.txt to work
- in VPATH build environments.
-
-2006-07-28 Paul Jakma <paul.jakma@sun.com>
-
- * main.texi: link-detect works on Solaris too.
- * ospfd.texi: Twiddle around with anchors a bit more.
- Clarify how setting MD5 auth by area and by interface interact,
- and add cross-references, as well as to the required
- command for setting key material.
-
-2006-07-27 Paul Jakma <paul.jakma@sun.com>
-
- * quagga.texi: Remove unused index definitions
- Add an Index node - for the concept index.
- * routeserver.texi: Set exampleindex to 0, so the example configs
- with long IPv6 addresses stand better chance of fitting.
- * overview.texi: 'Supported RFC' -> 'Supported RFCs'
- Remove paragraph indentation - texinfo does that.
- Revise the supported OS list slightly.
- Remove the IPv6 stack list, seems very dated and irrelevant.
- Revise the 'How to get Quagga' section.
- * ospfd.texi: minor tweaks: add some anchors, fix some minor
- format issues.
- Revise the help for 'abr-type'.
- Note that text authentication is unwise, recc'd MD5.
- Add some extra text for redistribute and passive-interface,
- about how latter can substitute for redist connected.
-
-2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * vtysh.1: Document new options -d and -E, and note that now multiple
- -c options may be supplied, with embedded linefeed now supported.
- In BUGS section, remove warning about vtysh causing a daemon
- to freeze, since this has been fixed.
-
-2006-07-04 Paul Jakma <paul.jakma@sun.com>
-
- * quagga.info: remove auto-generated file. It will still be
- present in dist tarballs, so shouldn't affect anyone but
- direct users of CVS. Required texinfo version should be
- widely available.
-
-2006-06-28 Erik Muller <erikm@internap.com>
-
- * ospfd.texi: Document new ospf router subcommand
- "log-adjacency-changes [detail]".
-
-2006-06-26 Paul Jakma <paul.jakma@sun.com>
-
- * ospfd.texi: Document that MD5 keyid is part of the protocol.
- * bgpd.texi: shut texinfo warnings up by replacing brackets in
- variable with angle brackets.
-
-2006-05-23 Paul Jakma <paul.jakma@sun.com>
-
- * bgpd.texi: Document the update-source command.
-
-2006-05-10 Paul Jakma <paul.jakma@sun.com>
-
- * quagga.info: update auto-built file.
-
-2006-05-08 Paul Jakma <paul.jakma@sun.com>
-
- * main.texi: --log_mode does not exist, remove, bug #245.
-
-2006-05-04 Paul Jakma <paul.jakma@sun.com>
-
- * ripd.texi: Add Version Control as a distinct section.
- Expand Version Control section with overview text,
- touching on insecurity of RIPv1 and referencing
- authentication section, cleanup text of various version
- commands.
- RIP Authentication: Add overview text, refer to RIPv1 version
- control, which is required to completely secure RIP.
-
-2006-03-31 Paul Jakma <paul.jakma@sun.com>
-
- * fig*.txt: New files, txt versions of the diagrammes for the
- info file.
- * protocol.texi: Document the new version 1 header.
- * routeserver.texi: Explicitly specify scaling widths for the
- figures, only way to make them look reasonable, sadly.
- Try fix some formatting and explicitely note lists as being
- bulleted.
- * Makefile.am: convert seems to do png to pdf just fine. No
- need for intermediate eps.
- Add txt figure expansions and list as dependencies and
- EXTRA_DIST files.
-
-2006-02-19 Paul Jakma <paul.jakma@sun.com>
-
- * quagga.info: update auto-built file.
- * ChangeLog: Fix old, existing entry for snmptrap.texi addition to
- credit the author, who got in touch with me.
- * snmptrap.texi: Add comment line with author's details.
-
-2006-01-19 Paul Jakma <paul.jakma@sun.com>
-
- * quagga.info: update auto-built file.
-
-2005-11-25 Paul Jakma <paul.jakma@sun.com>
-
- * texinfo.tex: update to newer version, seems to now properly
- scale the diagramme images in PDF output.
-
-2005-11-11 Paul Jakma <paul.jakma@sun.com>
-
- * quagga.info: update auto-built file. Methinks it's time to
- remove from CVS..
-
-2005-11-07 Paul Jakma <paul.jakma@sun.com>
-
- * Makefile.am: snmptrap.texi needs to be listed as a source,
- not disted otherwise.
-
-2005-11-04 Jeroen Simonetti <jsimonetti@denit.net>
-
- * snmptrap.texi: Documentation on configuring SNMP for logging
- traps.
-
-2005-11-04 Paul Jakma <paul.jakma@sun.com>
-
- * snmp.texi: Minor formatting changes.
- * quagga.info: Update auto-built file
- * ospf6d.texi: Add example config
- * bgpd.tex: Add example configs. Couple of cleanups of format
- and macros.
- * routemap.texi: Add an explanation of how route-maps work.
- Document the call and exit-policy commands.
-
-2005-10-29 Paul Jakma <paul@dishone.st>
-
- * ospfd.texi: Document the new spf and max-metric commands, and
- the additional form of dead-interval. Add documentation for
- various other commands. Cleanup misc stuff, citations, etc.
- Add some example configurations.
- * overview.texi: RFC3137 support added.
- * Makefile.am: Make quagga.pdf depend on the _TEXINFOS
- variable, this still doesn't fix the dependency though,
- sadly.
-
-2005-10-11 Paul Jakma <paul@dishone.st>
-
- * quagga.texi: Rejiggle the copyright sections a bit, seems to
- make makeinfo happier and generates info pages again on FC4.
- * quagga.info: Update this auto-built file.
-
-2005-04-29 Paul Jakma <paul@dishone.st>
-
- * defines.texi.in: Add PACKAGE_NAME, PACKAGE_STRING.
- * quagga.texi: Use PACKAGE_NAME, this is more to give me an excuse
- to update quagga.texi so that the 'UPDATED' in version.texi will
- be more recent, the Makefile seems to be dumb and not examine
- the texi files from which quagga.texi is generated.
- * quagga.info: Fresh copy to match updates.
-
-2005-04-28 Paul Jakma <paul@dishone.st>
-
- * quagga.info: updated
- * Makefile.am: automake seems to depend doc built stuff on srcdir
- for some reason, or maybe its cause we have quagga.info,
- quagga.texi in CVS - not sure. Anyway, the static rule for
- quagga.pdf should depend on the srcdir quagga.texi in that case.
-
-2005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
- spelling mistake: idenifier -> identifier.
-
-2005-04-22 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
- spelling mistake: intrefaces -> interfaces.
-
-2005-04-10 Paul Jakma <paul@dishone.st>
-
- * quagga.info: Update to match bgpd.texi addition
-
-2005-04-08 Hasso Tepper <hasso at quagga.net>
-
- * bgpd.texi: Document new "bgp bestpath as-path confed" command.
-
-2005-04-05 Paul Jakma <paul@dishone.st>
-
- * Makefile.am: Get rid of built_sources. It causes them to be added
- to dist, and the dist host can not generate the PDFs.
-
-2005-04-02 Paul Jakma <paul@dishone.st>
-
- * fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new
- files, dia diagramme XML versions of the original corresponding
- EPS encapsulated bitmaps.
- * fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new
- files, png exports by dia of the source dia diagrammes above.
- * fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed,
- replaced by above dia source.
- * routeserver.texi: remove extension in image macros.
- * quagga.info: updated build
- * Makefile.am: Add rules to build eps (using 'convert'), png (using
- dia). Add figures_BUILT_SOURCES to extra_dist to avoid the
- dependency on dia :) (amongst other things) for dist users.
- quagga_TEXINFOS should depend on figures_BUILT_SOURCES.
- * .cvsignore: ignore eps files, built from sources
- * Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES
- for figures, automake doesnt know anything about them.
-
-2005-03-25 Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
- * ipv6.texi: Add new commands for neighbor discovery
- interface ipv6 nd prefix X:X::X:X/M router-address
- interface ipv6 nd ra-interval msec
- interface ipv6 nd home-agent-config-flag
- interface ipv6 nd home-agent-lifetime
- interface ipv6 nd home-agent-preference
- interface ipv6 nd adv-interval-option
-
-2005-02-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * basic.texi: Add note about last-resort crash logging to /var/tmp
- when file logging is not configured.
- * quagga.info: updated build of autogenerated file
-
-2005-01-24 Paul Jakma <paul@dishone.st>
-
- * quagga.info: Version bump (autogenerated)
-
-2005-01-10 Paul Jakma <paul@dishone.st>
-
- * texinfo.tex: Updated to a version which understands @{ and @}
- * vtysh.texi: Add node name for @section
- * quagga.info: updated build of autogenerated file
-
-2005-01-07 Paul Jakma <paul@dishone.st>
-
- * quagga.info: Version bump (autogenerated)
-
-2005-01-05 Paul Jakma <paul@dishone.st>
-
- * quagga.info: Version bump
-
-2004-12-23 Paul Jakma <paul@dishone.st>
-
- * quagga.info: Version bump
-
-2004-12-18 Hasso Tepper <hasso at quagga.net>
-
- * Makefile.am: Add isisd man page to the list. Should fix problem
- isisd not included in release/snapshot tarballs.
-
-2004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
-
- * basic.texi: Document new logging features. Separate basic config
- commands from basic VTY commands.
-
-2004-11-25 Hasso Tepper <hasso at quagga.net>
-
- * *.8: Document -g/--group command line switch and some small
- cosmetical changes.
-
-2004-11-22 Paul Jakma <paul@dishone.st>
-
- * bgpd.8: escape -/+ signs, reported by ESR to bug-zebra.
-
-2004-11-19 Hasso Tepper <hasso at quagga.net>
-
- * Makefile.am: Don't remove quagga.info while cleaning up.
-
-2004-11-15 Paul Jakma <paul@dishone.st>
-
- * routeserver.texi: Strip ctrl-M from line endings, note by
- sigma@smx.pair.com
- * quagga.info: Add generated file to CVS, as it requires most recent
- texinfo to build, until such time as texinfo 4.7 is more
- prevalent.
-
-2004-11-08 Paul Jakma <paul@dishone.st>
-
- * Makefile.am: Add routeserver.texi to quagga_TEXINFOS.
- Add quagga.info to clean files list (would have thought automake
- would have done this, but it doesnt seem to)
-
-2004-11-07 Paul Jakma <paul@dishone.st>
-
- * quagga.texi: include routeserver.texi. TODO: integrate the current
- multiple-instance orientated bgpd route-server section with the
- new route-server docs.
-
-2004-11-07 Paul Jakma <paul@dishone.st>
-
- * Makefile.am: Add automatic rule to build pdf's from eps figures.
- Clean *.pdf. Add rule for quagga.pdf (as the eps.pdf pattern
- probably otherwise will override automake's rule for quagga.pdf)
- * overview.texi: URL was causing TeX overfull, put on newline.
- * quagga.texi: Put the copyright notice into @copying section, as
- is proper. Strip trailling space from the main menu lines.
- * rip(ng)?d.texi: Minor reformatting.
- * Add the route server docs.
- * bgpd.texi: remove unneeded page breaks. The 6Bone example
- overflows though.
- * routeserver.texi: new file, texinfo'fied and slightly modified
- version of the original TeX from James Luis Rubio.
- * fig-*.eps: new files, diagrammes.
-
-2004-11-06 Paul Jakma <paul@dishone.st>
-
- * defines.texi.in: New file, texi variables should be set here,
- autoconf substitution is available. Define common AUTHORS,
- COPYRIGHT_YEAR and COPYRIGHT_STR vars.
- * (global): Make use of makeinfo node pointer auto-creation
- to avoid having to fully specify links for nodes, so we only have
- to specify current node name - simplifies text slightly.
- Remove extraneous newlines which appear to cause extra blank pages
- to be added in output.
- Update copyright strings which appear in various places to
- use the new COPYRIGHT_STR texinfo variable.
- Change url to uref, the former need not output an actual
- hyperlink depending on version of texinfo, the latter should if
- supported by the format (eg PDF).
- * texinfo.tex: Update to a more recent version. previous file
- was many many years old. This file should possibly be removed
- altogether, and allowed to be installed by automake.
- * quagga.texi: Make use of automake's version.texi feature to
- have VERSION and some other vars auto-defined. include
- defines.texi. Change copyright strings to use the COPYRIGHT_STR
- variable.
- * install.texi: Make the privs section an actual section. Ditto for
- the Linux notes.
- * overview.texi: Supply URL for Quagga, where format allows. Tidy up
- one or two paragraphs slightly.
- Update the section on supported platforms.
- Remove the ZNOG list stuff, direct reader to the website for
- further information on email lists.
- * vtysh.texi: Update the integrated config file section. Make the
- commands sections so correct PDF indexes are built.
-
-2004-10-12 Hasso Tepper <hasso at quagga.net>
-
- * snmp.texi: ospf6d supports SNMP as well now.
-
-2004-10-11 Hasso Tepper <hasso at quagga.net>
-
- * ospfd.8: Update manpage: add info about new -a/--apiserver command
- line switch.
-
-2004-10-11 Paul Jakma <paul@dishone.st>
-
- * ospfd.texi: reformat the ospf md5 paragraph, add an additional
- way to work around bad clocks.
-
-2004-10-03 Hasso Tepper <hasso at quagga.net>
-
- * vtysh.1: Update vtysh man page to reflect changes in shell. Remove
- info about -f command line switch.
-
-2004-09-11 Paul Jakma <paul@dishone.st>
-
- * quagga.texi: Update copyright. Contents should be at beginning
- of docs...
-
-2004-09-11 Paul Jakma <paul@dishone.st>
-
- * ospfd.texi: OSPF MD5 auth requires stable time.
-
-2004-08-31 Hasso Tepper <hasso at quagga.net>
-
- * zebra.8: Document -s/--nl-bufsize command line switch.
-
-2004-08-27 Hasso Tepper <hasso at quagga.net>
-
- * Update vtysh man page to reflect changes in shell.
-
-2004-08-10 Hasso Tepper <hasso at quagga.net>
-
- * Updated man pages.
- * Removed vty commands section from all man pages. This inf belongs to
- Info pages.
- * Added isisd man page.
-
-2004-07-31 Christian Hammers <ch@lathspell.de>
-
- * snmp.texi: update (completely rewritten almost)
-
-2004-06-30 Greg Troxel <gdt@poblano.ir.bbn.com>
-
- * Makefile.am (EXTRA_DIST): Add files in mpls explicitly, to avoid
- copying CVS files, per the automake manual's recommendations.
-
-2004-05-27 Paul Jakma <paul@dishone.st>
-
- * Correct RIP port, s/521/520/, reported by xantius@xantius.com
-
-2003-11-27 Hasso Tepper <hasso@estpak.ee>
-
- * Added -A and -u descriptions to the man pages.
-
-2003-01-22 Christian Hammers <ch@westend.com>
-
- * ospfd.texi (OSPF router, OSPF router): Add description.
-
-2002-07-07 Kunihiro Ishiguro <kunihiro@ipinfusion.com>
-
- * zebra-0.93 released.
-
-2001-02-07 Pekka Savola <pekkas@netcore.fi>
-
- * Correct bad English ;-).
-
-2001-02-01 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * zebra-0.91 released.
-
-2001-01-09 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * zebra-0.90 released.
-
-2000-10-02 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * zebra-0.89 released.
-
-2000-10-02 Horms <horms@vergenet.net>
-
- * Makefile.am: Fix texinfo file installation problem.
-
-2000-08-17 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * zebra-0.88 released.
-
- * ospfd.texi (Redistribute routes to OSPF): distance <1-255>
- @var{source} command is temporary disabled. So it is removed from
- document.
-
-2000-07-04 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * vtysh.1: Add man entry for vtysh.
-
- * bgpd.1: Change section to 8.
- * ospfd.1: Likewise.
- * ospf6d.1: Likewise.
- * ripd.1: Likewise.
- * ripngd.1: Likewise.
- * zebra.1: Likewise.
-
-1999-09-01 "A.Waddington" <waddington@usa.net>
-
- * zebra.texi: Replace @command with @code until it gets ready.
- Remove @macro.
-
-1999-08-26 Andrew Waddington <waddington@usa.net>
-
- * bgpd.1: Add man page.
- ospf6d.1: Likewise.
- ospfd.1: Likewise.
- ripd.1: Likewise.
- ripngd.1: Likewise.
- zebra.1: Likewise.
-
-1999-08-14 Andrew Waddington <waddington@usa.net>
-
- * zebra.texi: Many typo is fixed. Some grammatical rectifications
- is made.
-
-1999-07-27 Gerhard Poul <gpoul@gnu.org>
-
- * zebra.texi: Update zebra.texi.
-
-1999-07-02 Gerhard Poul <gpoul@gnu.org>
-
- * draft-zebra-00.ms: New file added. This is groff version of
- draft-zebra-00.txt. This is a master file of draft-zebra-00.txt.
-
- * draft-zebra-00.txt: Generated from draft-zebra-00.txt.
-
-1999-05-07 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * zebra.texi (Top): Add ospf6d chapter.
-
-1999-03-31 Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>
-
- * zebra.texi: Improve some sections.
-
-1999-03-04 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * archfig.tex, zebra.sty, zebra.tex: Temporary removed due to the
- description is out of date.
-
-1999-02-24 Kunihiro Ishiguro <kunihiro@zebra.org>
-
- * texinfo.tex: New file added. Automake complains the absence of
- texinfo.tex.