diff options
Diffstat (limited to 'ospf6d/README')
| -rw-r--r-- | ospf6d/README | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/ospf6d/README b/ospf6d/README new file mode 100644 index 00000000..b3b4d16d --- /dev/null +++ b/ospf6d/README @@ -0,0 +1,85 @@ + + Zebra OSPF daemon for IPv6 network + + 2001/12/20 + +Zebra OSPF6d is OSPF version 3 daemon which is specified by +"OSPF for IPv6" (RFC 2740). + +*** NOTE *** + Zebra ospf6d is in development yet. It may lack some functionalities, + and may have some bugs. Use the latest version from the anoncvs + repository (http://www.zebra.org/cvs.html) ! + +This file README is like memo yet, so please feel free to ask +<yasu@sfc.wide.ad.jp> by E-mail. Patches will be appriciated. + +ospf6d's vty port was default to 2606/tcp. +Use commands below. + +VIEW NODE: + show ipv6 ospf6 + To see Router-ID, uptime of ospf6d, some statistics. + + show ipv6 ospf6 database ... + This command shows LSA database. You can specify + LS-type/LS-ID/Advertising-Router of LSAs. '*' is recognized. + + show ipv6 ospf6 interface ... + To see the status of the OSPF interface, and the configuration + like interface costs. + + show ipv6 ospf6 neighbor ... + Shows state of neighbors and choosed (Backup) DR on the I/F. + + show ipv6 ospf6 route (X::X) + This command shows internal routing table of the ospf6d. + Routes not calculated by OSPFv3 (like connected routes) + are not shown. If Address is specified (X::X), shows the route + that the address matches. + + show ipv6 ospf6 route redistribute (X::X) + Shows the routes advertised as AS-External routes by the router + itself. If Address is specified (X::X), shows the route + that the address matches. + +CONFIG NODE: + interface NAME + To enter INTERFACE NODE + + router ospf6 ... + To enter OSPF6 NODE + +INTERFACE NODE: + ipv6 ospf6 cost COST + Sets the interface's output cost. default 1 + + ipv6 ospf6 hello-interval HELLOINTERVAL + Sets the interface's Hello Interval. default 10 + + ipv6 ospf6 dead-interval DEADINTERVAL + Sets the interface's Router Dead Interval. default 40 + + ipv6 ospf6 retransmit-interval RETRANSMITINTERVAL + Sets the interface's Rxmt Interval. default 5 + + ipv6 ospf6 priority PRIORITY + Sets the interface's Router Priority. default 1 + + ipv6 ospf6 transmit-delay TRANSMITDELAY + Sets the interface's Inf-Trans-Delay. default 1 + +OSPF6 NODE: + router-id A.B.C.D + Sets the router's Router-ID + + interface NAME area AREA + Binds interface to specified Area, and start + sending OSPFv3 packets. + +Sample configuration is in ospf6d.conf.sample. + +-- +Yasuhiro Ohara <yasu@sfc.wide.ad.jp> +Kunihiro Ishiguro <kunihiro@zebra.org> + |