| Age | Commit message (Collapse) | Author |
|---|
|
* lib/md5.[ch] Add implementation of HMAC-MD5 from RFC 2104.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
* lib/linklist.h
- Change the listnextnode, listhead and listtail macros so that
they allow the list pointer to be NULL.
- Modify the ALL_LIST_ELEMENTS* macros such that they clear the
data pointer at the beginning and end of the loop.
From: Josh Bailey <joshb@google.com>
Signed-off-by: Avneesh Sachdev <avneesh@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
nonwithstanding any desire for optimisation, these versions are shorter
and more concise. reading the comments, they might even be easier to
understand.
I've tested them on i686 and x86_64, and checked that correct assembler
code is emitted for ARM, MIPS and PowerPC.
IPv6 is left as an exercise for another day, none of the ideas I had led
to a "yes, this is the one to go with" solution.
Signed-off-by: David Lamparter <equinox@diac24.net>
|
|
This reverts commit d171bf58ef12ace43d48565e6870722dece1e6ed.
There are multiple reasons for this revert, including bug #720, but also
quite simply the unreadability of having 2000 lines of an autogenerated
table in the middle of a source file.
Signed-off-by: David Lamparter <equinox@diac24.net>
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
|
|
* bgpd/bgp_attr.c: (bgp_attr_flags_diagnose) debug code for error-handling
paths probably shouldn't assert, instead it should just log that there
was no problem.
|
|
* bgpd/bgp_attr.c: (bgp_attr_parse) the invalid flag check call to
bgp_attr_malformed is pretty useless if it doesn't actually allow
for the PROCEED non-error case.
|
|
* bgp_attr.c: (bgp_attr_flag_invalid) flags is meant to be masked
off with the mask variable...
|
|
* bgp_attr.c: (bgp_attr_malformed) When a malformed attribute error can be
ignored, and BGP message processing may still proceed, the stream getp
should be adjusted to the end of the attribute - the caller may not have
consumed all the attribute. Problem noted by Martin Winter in bug 678.
Also, rename the 'startp' local to 'notify_datap', for clarity.
|
|
|
|
This is the functionality described in Appendix C of RFC 6126. Its
main purpose is to avoid keeping a full source table, which makes it
possible to implement a subset of Babel in just a few hundred lines of
code. However, in Quagga the code for maintaining the source table is
already there, and a parasitic implementation can be simulated using
filtering -- so it makes little sense to keep the functionality.
|
|
This commit makes the following lines visible in running-config text,
when respective intervals are configured to non-default values:
* babel hello-interval
* babel update-interval
* babel resend-delay
|
|
|
|
|
|
|
|
|
|
|
|
Standalone babeld has a configuration interface that is not used in
Quagga. This removes a few bits of this code that survived the
port to Quagga.
|
|
|
|
The primary focus of this commit is to make "show running-config"
command display more current configuration, including some of the bits
previously seen in the output of "show babel running-config". Besides
that, the following commands were renamed for consistency with the
syntax of other components:
"debug *" to "debug babel *" (and moved to top level)
"show babel running-config" to "show babel parameters"
* babel_interface.c
* show_babel_running_config(): rename to show_babel_parameters(),
update syntax pattern, don't call show_babeld_configuration()
* babel_if_init(): update respectively
* babel_enable_if_config_write(): new VTY helper for static
babel_enable_if
* babel_interface.h: add extern declaration
* babel_main.c: unset all debug options by default
* show_babel_main_configuration(): remove debug options decoder
* babel_zebra.c
* babel_debug(): rename to debug_babel(), update syntax pattern
* no_babel_debug(): rename to no_debug_babel(), update syntax pattern
* babelz_zebra_init(): update respectively
* debug_babel_config_write() new VTY helper for static debug_type
* babel_zebra.h: add extern declaration
* babeld.c
* babel_config_write(): add the code to output "debug babel *",
"router babel", "redistribute *" and "network *" statements
* show_babeld_configuration(): dismiss
* babeld.h: remove extern declaration
* babeld.texi: update for renamed commands
* babeld.conf.sample: idem, add debug statements block
|
|
Thanks to Denis Ovsienko.
|
|
|
|
|
|
|
|
|
|
|
|
They didn't work anyway, since they're called too late.
|
|
|
|
The function was effectively duplicating existing
zclient_redistribute(). This makes no_babel_redistribute_type()
consistent with babel_redistribute_type()
|
|
|
|
|
|
|
|
Babel makes use of blackhole routes to prevent routing loops between
overlapping prefixes shortly after a route is retracted (see RFC 6126
sections 2.8 and 3.5.5). This patch adds support for installing such
blackhole routes.
|
|
Factorise the common parts of the in/out filtering functions. This also
fixes a bug with filtered out routes, which in babeld are signalled by
a filter returing INFINITY, not -1.
|
|
|
|
|
|
Stand-alone babeld installs routes using both a next-hop gateway
and an interface index. Unfortunately, this doesn't work for IPv4
under Quagga.
We now ignore the ifindex when installing IPv4 routes, which makes
Babel work for IPv4 in prefix-based networks. Of course this breaks
IPv4 mesh networks, unless you play some tricks with your interfaces'
netmasks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Perhaps could it be able to free already free memory (so free(NULL)),
in function interface_reset(). On other hand, it initiated untracked
interfaces, raising (at least) inappropriate messages. Finally, I
remove the BABEL_IF_IS_ENABLE flag, witch was not really usefull.
Note the test if_up isn't weaker, because (...IS_UP => ...IS_ENABLE).
|
|
|
|
We are interested by eui64 with at least 6 octets.
|
|
|
|
|
|
Babelz is the last version of the stand-alone babel daemon. In
particular, it use multiple channels to diminuate
interferences. Please refer to this one for more details.
|
