| Age | Commit message (Collapse) | Author |
|---|
|
2006-07-10 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (ospf_nsm_event) Record state change timestamp
and event in nbr struct.
* ospf_neighbor.h: (struct ospf_neighbor) Add fields to record
timestamp of last NSM change and event.
* ospf_vty.c: (show_ip_ospf_neighbor_detail_sub) Print
last state change timestamp and event, if available.
|
|
2006-07-10 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (nsm_notice_state_changes) Move state change
logging code to new func to declutter nsm_change_state and
ospf_nsm_event.
Log event with AdjChange, it's useful to know.
(nsm_change_state) move adjchange and snmp logging to previous.
(ospf_nsm_event) call nsm_notice_state_changes from here.
Move the debug message to entry of function, so it gets out
even if something goes wrong.
|
|
2006-07-10 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (nsm_change_state) call nsm_clear_adj for all
adjacency losses, hence removing need for nsm_reset_nbr.
(nsm_reset_nbr) kill it, clear_adj in previous does fine.
(nsm_kill_nbr,nsm_start) remove nsm_reset_nbr call.
(ospf_nsm_event) Allow NSM function to be NULL, this along with
removal of nsm_reset_nbr, allows a bunch of now useless functiosn
to be removed.
Remove some useless variables.
(nsm_ignore) now useless, remove.
(nsm_bad_ls_req) ditto
(nsm_seq_number_mismatch) "
(nsm_oneway_received) "
(nsm_inactivity_timer) "
(nsm_ll_down) "
(NSM) replace removed action functions with NULL.
|
|
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_packet.c: (ospf_hello) Improve NetworkMask mismatch warning
message to include interface name and conflicting prefix lengths.
|
|
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vty.c: (vty_log_out) Do not call vty_close, because this could
result in a parent function's accessing the freed memory.
Instead, set status VTY_CLOSE and call shutdown(vty->fd, SHUT_RDWR).
And add a comment on vty_close.
|
|
2006-07-10 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vty.c: (vty_log_out, vty_read, vty_flush, vtysh_flush, vtysh_read)
After an I/O error, must set vty->monitor to 0 before calling
zlog_warn, otherwise an infinite recursion could occur
(since zlog_warn triggers a message to be written to the vty,
and that in turn triggers another error message when it fails, etc.).
|
|
2006-07-07 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.h: Add a NSM_Deleted neighbour state, to act as dummy
state indicating the neighbour is to be deleted.
* ospf_nsm.c: (general) Use the NSM_Deleted state to delete
neighbours, thus allowing code to be slightly more obvious
in its flow.
(nsm_timer_set) Add NSM_Deleted. Add another timer the code
missed.
(nsm_kill_nbr) No need for special case call to nsm_change_state
anymore.
Make the assert and error-handling for same case more readable
(Andrew Schorr)
Remove the call to ospf_nbr_delete, nsm_change_state can do
this generally now via NSM_Deleted.
(struct ... NSM) Add the dummy NSM_Deleted state, the 3 events
that can lead to nsm_kill_nbr all now transition the NBR to
NSM_Deleted and the general change_state function can be left
to do the work.
(ospf_nsm_event) Special casing of events and early-return can
be removed now.
On transition into Deleted, delete the nbr.
* ospf_dump.c: (ospf_nsm_state_msg) Add Deleted.
|
|
2006-07-06 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (ospf_nsm_event) LLDown event also results in nbr
being deleted, requires early-return too. Likely explains
some crash reports after interface events.
|
|
2006-07-04 Paul Jakma <paul.jakma@sun.com>
* quagga.info: remove auto-generated file. It will still be
present in dist tarballs, so shouldn't affect anyone but
direct users of CVS. Required texinfo version should be
widely available.
* .cvsignore: ignore quagga.info
|
|
2006-07-04 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (general) Various small cleanups from Andrew's
review of last set of patches.
(nsm_timer_set) Loading, Full and default can share
same code too.
(nsm_should_adj) Can just be one big OR.
(nsm_twoway_received) Collapse into return statement.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* ospf_lsa.c: (ospf_translated_nssa_refresh) CID #13.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (nsm_clear_adj) clear adjacency related state for a
neighbour, needed for some state changes from > ExStart down
to ExStart or less, which need not go through nsm_reset_nbr.
(nsm_reset_nbr) move code to former. Should be static.
(ospf_nsm_event) Remove long dead code.
Use nsm_clear_adj for state changes that take down
adjacencies to TwoWay/ExStart.
(nsm_kill_nbr) Oops, action function shouldn't try return
1 for error.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (nsm_timer_set) ls_req timer should be OFF in
early states.
Compact several identical sections.
Set inactivity timer to OFF for Down, for documentary purposes.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (ospf_nsm_event) Don't allow action functions to
change next_state if the NSM tables do not indicate
next_state is conditional, log warning if one tries -
existing code appears fine though.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* ospf_nsm.c: (nsm_should_adj) New function, just consolidate the
10.4 adjacency check from nsm_twoway_received/nsm_adj_ok.
(nsm_twoway_received/nsm_adj_ok) Use former.
|
|
2006-07-03 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* vty.c: (vty_log_out) Debug messages to terminal vty sessions
should include timestamps.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* rt_netlink.c: (netlink_interface_addr) Fix CID #104, can not
proceed if addr is NULL.
* zebra_rib.c: (static_add_ipv6) Fix CID #18, double check
required arguments are supplied for the given nexthop type.
|
|
2006-07-02 Paul Jakma <paul.jakma@sun.com>
* bgp_fsm.c: (bgp_{stop,start}) Move clear/free of certain
bits of state from stop to start, as they may be used via
peer references on clearing queues..
|
|
2006-06-29 Paul Jakma <paul.jakma@sun.com>
* rip_zebra: (general) convert redistribute commands to use
the auto-generated defines.
|
|
- entry was left in wrong order, according to date.
|
|
2006-06-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_vty.c: (show_ip_ospf_neighbor_id) Should show all instances
of that neighbor (since it may appear on multiple interfaces)
instead of bailing out after showing the first match.
|
|
2006-06-28 Paul Jakma <paul.jakma@sun.com>
* memory.c: Fix typo in cpp conditional around malloc.h, from
comment in bug #269.
|
|
2006-06-29 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_nsm.c: (nsm_twoway_received) When deciding whether to
change from state Init to ExStart, the test for whether the
neighboring router is DR or BDR should be against the
local router's notion of DR/BDR, not the neighbor's view.
|
|
2006-06-28 Erik Muller <erikm@internap.com>
* ospfd.h: Define 2 new struct ospf config flags:
OSPF_LOG_ADJACENCY_CHANGES and OSPF_LOG_ADJACENCY_DETAIL
* ospf_nsm.c (nsm_change_state): Log adjacency changes if
requested.
* ospf_vty.c (ospf_log_adjacency_changes): New command function
to implement ospf subcommand "log-adjacency-changes [detail]".
(no_ospf_log_adjacency_changes) Turn off log-adjacency-changes.
(show_ip_ospf) Show whether adjacency changes are logged.
(ospf_config_write) Add "log-adjacency-changes [detail]" to config.
(ospf_vty_init) Add ospf_log_adjacency_changes and
no_ospf_log_adjacency_changes.
* ospfd.texi: Document new ospf router subcommand
"log-adjacency-changes [detail]".
|
|
2006-06-27 Paul Jakma <paul.jakma@sun.com>
* route_types.awk: Fix previous commit. Forgot to remove the
printf of the bare/numeric route-type help string (empty string)
|
|
2006-06-27 Paul Jakma <paul.jakma@sun.com>
* route_types.awk: Remove setting the 'bare' numeric route type
in redist strings.
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* ospf_vty.c: (general) Replace in-place route redistribution
command and help strings with the new auto-generated defines
from lib/route_types.h
|
|
2006-05-23 Paul Jakma <paul.jakma@sun.com>
* route_types.txt: New file, table of ZEBRA_ROUTE definitions.
* route_types.awk: New script, to parse previous and generate
(for now) redistribute string defines.
* Makefile.am: build route_types.h using previous two, ala
memtypes.h, include the script and table file in EXTRA_DIST.
* command.h: pull in route_types.h, add a REDIST_STR define.
|
|
2006-06-26 Paul Jakma <paul.jakma@sun.com>
* ospfd.texi: Document that MD5 keyid is part of the protocol.
* bgpd.texi: shut texinfo warnings up by replacing brackets in
variable with angle brackets.
|
|
2006-06-26 Paul Jakma <paul.jakma@sun.com>
* ospf_abr.c: (general) NSSA translate-candidate ABRs need to
be ASBRs, or other routers may rightfully refuse to install
translated type-5s LSAs. reported by dendroot@gmail.com.
(ospf_abr_nssa_check_status) Detect change in translator
state when ABR, and inc/dec redistribute count as when we
leave/enter the disabled state - so that translate-enabled
ABR properly sets ASBR bit on non-NSSA areas.
Run the resulting function through indent to clean it up.
* ospf_lsa.c: (router_lsa_flags) For purposes of ASBR bit,
NSSA area is same as stub area.
|
|
2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_snmp.c: (ospfTrapNbrStateChange, ospfTrapIfStateChange) Improve
info log message to indicate why the trap is being sent.
|
|
2006-06-24 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_dump.c: (config_write_debug) Fix typo to show debug ospf nsm
status properly (not ism status).
|
|
2006-06-17 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* ospf_vty.c: ({no_,}ospf_passive_interface) Replace if_lookup_by_name
with a call to if_get_by_name -- if the interface does not exist
already, it should be created. And remove the obsolete warning
message.
|
|
2006-06-15 Andrew J. Schorr <ajschorr@alumni.princeton.edu>
* redhat/quagga.spec.in: Get default distro automatically
by using rpm to query the fedora-release version.
And fix a typo (should be default_dist, not dist_default).
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* Reported by Milan Koci
* ospf_interface.h: (struct ospf_if_info) Add reference counts
for multicast group memberships. Add various macros to help
manipulate/check membership state.
* ospf_interface.c: (ospf_if_set_multicast) Maintain the
ospf_if_info reference counts, and only actually drop
memberships if it hits 0, to avoid losing membership when
OSPF is disabled on an interface with multiple active OSPF
interfaces.
* ospf_packet.c: (ospf_{hello,read}) Use the new macros to
check/set
multicast membership.
* ospf_vty.c: (show_ip_ospf_interface_sub) ditto.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* (general) The key fixes are actually Andrew Schorr's.
* interface.c: (ip_address_uninstall) Unset the configured flag.
* connected.c: (connected_same) new helper, check whether
two connected are same.
(connected_implicit_withdraw) new helper, consolidation of
existing code in connected_add_ipv{4,6}.
Try filter out unneeded Zserv address delete/adds when
address is exact same.
Where old address is implicitely removed, be sure to preserve
the IFC_CONFIGURED flag if set, fixes bug where configured
addresses were being lost on FreeBSD.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* lib/if.c: (if_flag_dump) remove the whitespace indentation, callers
should provide.
* zebra/interface.c: (if_flag_dump_vty) redundant code, remove.
(if_dump_vty) use libzebra if_flag_dump.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* linklist.c: (list_delete) call list_delete_all_node, don't
duplicate it.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* memory.h: Experimental, have XFREE macro NULL out the freed
pointer.
|
|
2006-06-15 Paul Jakma <paul.jakma@sun.com>
* command.c: (cmd_describe_command_real) Fix leak, CID #38.
|
|
2006-05-31 Paul Jakma <paul.jakma@sun.com>
* ospf_lsdb.c: (ospf_lsdb_delete) robustify against NULL arguments,
print warning.
* ospf_lsa.c: (ospf_discard_from_db) ditto.
(ospf_maxage_lsa_remover) Check lsa->lsdb for validity, possible
mitigation (but not solution) for bug #269.
|
|
2006-05-30 Paul Jakma <paul.jakma@sun.com>
* ospf_packet.c: (ospf_read) Debug message about packets
received on unenabled interfaces should be conditional on
debug being set.
|
|
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* test-sig.c: (main) configure logging, there's no terminal
to write to for one thing, but we do want stdout, and we
don't want a test to spam syslog.
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* configure.ac:
Check for Sun libc printstack(), add a general HAVE_STACK_TRACE
define for lib/log.c, if any supported stack symbol dumping
function is found (glibc backtrace/sun libc printstack).
* log.c: (general) Add support for Sun libc printstack().
(hex_append) make the cpp conditional on general HAVE_STACK_TRACE
define.
(zlog_backtrace_sigsafe) Ditto. Add printstack() version of the
the DUMP macro in this function.
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* vty.c: (vty_log/vty_log_fixed) dont crash if called when vty
hasn't been initiliased.
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* memory.c: malloc.h is deprecated in favour of stdlib.h, however
we still need it on GNU Libc for mallinfo().
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* zebra.h: Include inttypes.h rather than stdint.h, best practice
according to the autoconf manual.
Add UINT*_MAX defines for older platforms lacking these (FBSD 4)
|
|
2006-05-28 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Update SOS CFLAGS, Xt shouldn't be used and
enable debug options.
Add a check for GNU Make and warn the user if it does not appear
to be the make used.
|
|
2006-05-24 Paul Jakma <paul.jakma@sun.com>
* vtysh.c: (general) Add 'show memory' command.
|
