| Age | Commit message (Collapse) | Author |
|---|
|
2006-05-04 Paul Jakma <paul.jakma@sun.com>
* ripd.texi: Add Version Control as a distinct section.
Expand Version Control section with overview text,
touching on insecurity of RIPv1 and referencing
authentication section, cleanup text of various version
commands.
RIP Authentication: Add overview text, refer to RIPv1 version
control, which is required to completely secure RIP.
|
|
2006-03-31 Paul Jakma <paul.jakma@sun.com>
* fig*.txt: New files, txt versions of the diagrammes for the
info file.
* protocol.texi: Document the new version 1 header.
* routeserver.texi: Explicitly specify scaling widths for the
figures, only way to make them look reasonable, sadly.
Try fix some formatting and explicitely note lists as being
bulleted.
* Makefile.am: convert seems to do png to pdf just fine. No
need for intermediate eps.
Add txt figure expansions and list as dependencies and
EXTRA_DIST files.
|
|
2006-02-19 Paul Jakma <paul.jakma@sun.com>
* quagga.info: update auto-built file.
* ChangeLog: Fix old, existing entry for snmptrap.texi addition to
credit the author, who got in touch with me.
* snmptrap.texi: Add comment line with author's details.
|
|
2006-01-19 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Bump to 0.99.3
* doc/quagga.info: update auto-built file.
|
|
* texinfo.tex: update to newer version, seems to now properly
scale the diagramme images in PDF output.
|
|
|
|
|
|
2005-11-11 Paul Jakma <paul.jakma@sun.com>
* quagga.info: update auto-built file. Methinks it's time to
remove from CVS..
|
|
2005-11-07 Paul Jakma <paul.jakma@sun.com>
* Makefile.am: snmptrap.texi needs to be listed as a source,
not disted otherwise.
|
|
* quagga.info: Update auto-built file
* ospf6d.texi: Add example config
* bgpd.texi: Add example configs. Couple of cleanups of format
and macros.
* routemap.texi: Add an explanation of how route-maps work.
Document the call and exit-policy commands.
|
|
* snmptrap.texi: Contributed documentation, contributors name
is lost (please get in touch). Configuring SNMP for logging
traps.
* snmp.texi: Minor formatting changes.
* quagga.info: Update auto-built file
|
|
* ospfd.texi: Document the new spf and max-metric commands, and
the additional form of dead-interval. Add documentation for
various other commands. Cleanup misc stuff, citations, etc.
Add some example configurations.
* overview.texi: RFC3137 support added.
* Makefile.am: Make quagga.pdf depend on the _TEXINFOS
variable, this still doesn't fix the dependency though,
sadly.
|
|
* quagga.texi: Rejiggle the copyright sections a bit, seems to
make makeinfo happier and generates info pages again on FC4.
* quagga.info: Update this auto-built file.
|
|
* defines.texi.in: Add PACKAGE_NAME, PACKAGE_STRING.
* quagga.texi: Use PACKAGE_NAME, this is more to give me an excuse
to update quagga.texi so that the 'UPDATED' in version.texi will
be more recent, the Makefile seems to be dumb and not examine
the texi files from which quagga.texi is generated.
* quagga.info: Fresh copy to match updates.
|
|
* quagga.info: updated
* Makefile.am: automake seems to depend doc built stuff on srcdir
for some reason, or maybe its cause we have quagga.info,
quagga.texi in CVS - not sure. Anyway, the static rule for
quagga.pdf should depend on the srcdir quagga.texi in that case.
|
|
* quagga.info: updated
|
|
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
spelling mistake: idenifier -> identifier.
|
|
* bgpd.8,isisd.8,ospf6d.8,ospfd.8,ripd.8,ripngd.8,zebra.8: Fix
spelling mistake: intrefaces -> interfaces.
|
|
* quagga.info: Update to match bgpd.texi addition
|
|
* bgp_aspath.[ch], bgp_route.c, bgp_vty.c, bgpd.[ch]: Allow to enable
the length of confederation path segments to be included during the
as-path length check in the best path decision.
|
|
* Makefile.am: Get rid of built_sources. It causes them to be added
to dist, and the dist host can not generate the PDFs.
|
|
* Makefile.am: Urg, dont use automake _SOURCES, _BUILT_SOURCES
for figures, automake doesnt know anything about them.
|
|
* .cvsignore: ignore eps files, built from sources
|
|
* Makefile.am: quagga_TEXINFOS should depend on figures_BUILT_SOURCES.
|
|
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.dia: new
files, dia diagramme XML versions of the original corresponding
EPS encapsulated bitmaps.
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.png: new
files, png exports by dia of the source dia diagrammes above.
* fig{-{normal,rs}-processing,_topologies_{rs,full}}.eps: removed,
replaced by above dia source.
* routeserver.texi: remove extension in image macros.
* quagga.info: updated build
* Makefile.am: Add rules to build eps (using 'convert'), png (using
dia). Add figures_BUILT_SOURCES to extra_dist to avoid the
dependency on dia :) (amongst other things) for dist users.
|
|
include year 2005.
|
|
* Extensions to Neighbor Discovery for Mobile IPv6
|
|
* basic.texi: Add note about last-resort crash logging to /var/tmp
when file logging is not configured.
* quagga.info: updated build of autogenerated file
|
|
* configure.ac: Bump version to 0.99.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* texinfo.tex: Updated to a version which understands @{ and @}
* vtysh.texi: Add node name for @section
* quagga.info: updated build of autogenerated file
|
|
* configure.ac: Bump version to 0.98.0
* doc/quagga.info: Version bump (autogenerated)
|
|
* configure.ac: Bump version to 0.97.5
* doc/quagga.info: autogenerated, version bump.
|
|
configure.ac: Bump version to 0.97.4
doc/quagga.info: ditto (autogenerated file)
|
|
|
|
* bgp_main.c: (main) The 2nd argument to openzlog has been removed.
* isis_main.c: (main) The 2nd argument to openzlog has been removed.
* ospf6_main.c: (main) The 2nd argument to openzlog has been removed.
Note that stdout logging will no longer be enabled by default when
not running as a daemon.
* ospf_main.c: (main) The 2nd argument to openzlog has been removed.
* rip_main.c: (main) The 2nd argument to openzlog has been removed.
* ripng_main.c: (main) The 2nd argument to openzlog has been removed.
* main.c: (main) The 2nd argument to openzlog has been removed.
So stdout logging will no longer be enabled by default.
* irdp_main.c: (irdp_finish) Reduce severity of shutdown message
from LOG_WARNING to LOG_INFO.
* vtysh.c: Make several functions static instead of global.
Added several commands to support destination-specific logging levels.
(vtysh_completion) This function is unused, so comment it out.
* basic.texi: Document new logging features. Separate basic config
commands from basic VTY commands.
* log.h: Replace struct zlog flags and maskpri fields with maxlvl
array to support individual logging levels for each destination.
Remove the 2nd argument to openzlog since the default logging config
should be standardized inside the library. Replaced the
zlog_set_flag and zlog_reset_flag functions with zlog_set_level.
And zlog_set_file now requires an additional log_level argument.
Declare zlog_proto_names for use inside command.c in the
"show logging" command. Added defines useful for command
construction.
* log.c: (vzlog) Decide where to send the message based on the
individual logging levels configured for each destination.
Remove support for ZLOG_STDERR since it was never actually used.
Support record-priority for terminal monitors.
(zlog_signal,zlog_backtrace_sigsafe) Support destination-specific
logging levels. Remove stderr support (was never used). Added
support for terminal monitor logging.
(_zlog_assert_failed) Increase message severity to LOG_EMERG.
(openzlog) Remove 2nd argument since default config should be
standardized in library. By default, terminal monitoring
is set to debug, and all other logging is disabled.
(zlog_set_flag,zlog_reset_flag) Removed.
(zlog_set_level) New function to replace zlog_set_flag and
zlog_reset_flag. Supports destination-specific logging levels.
(zlog_set_file,zlog_reset_file) Support file-specific logging level.
(zlog_rotate) Log an error message if fopen fails, and support
new file-specific logging level.
* command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that
command functions will be static instead of global. Remove
declarations for config_exit and config_help. Define new macros
DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can
have deprecated commands in vtysh. Similarly, for completeness,
define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED.
Also, fix bug in ALIAS_ATTR macro (didn't matter because it
was never used).
* command.c: Make many functions static instead of global.
(facility_name,facility_match,level_match) New functions
to support enhanced destination-specific logging levels.
(config_write_host) Support new destination-specific logging levels.
(config_logmsg) Added new "logmsg" command to help test logging
system.
(show_logging) Added "show logging" command to show the current
configuration of the logging system.
(config_log_stdout_level) Support explicit stdout logging level.
(no_config_log_stdout) Now takes optional LEVEL arg.
(config_log_monitor,config_log_monitor_level,no_config_log_monitor)
New commands creating new "log monitor" commands to set terminal
monitoring log level.
(config_log_file_level) Support explicit file logging level.
(config_log_syslog_level) Support explicit syslog logging level.
(config_log_facility,no_config_log_facility) Implement new
"log facility" command.
(cmd_init) Add hooks for new commands: "show logging", "logmsg",
"log stdout <level>", "log monitor", "log monitor <level>",
"no log monitor", "log file <filename> <level>",
"no log file <filename> <level>", "log syslog <level>",
"log facility", and "no log facility".
* vty.h: Added a "level" argument to vty_log so it can support
"log record-priority". Declare new function vty_log_fixed for
use in signal handlers.
* vty.c: (vty_log,vty_log_out) Added a "level" argument to support
"log record-priority" for vty terminal monitors.
(vty_down_level) Use config_exit_cmd.func instead of calling
config_exit directly (since command functions will now be static
instead of global).
(vty_log_fixed) New function to send terminal monitor messages
from inside a signal handler.
|
|
|
|
* bgpd.8: escape -/+ signs, reported by ESR to bug-zebra.
|
|
makeinfo:
* Don't attempt to generate it after every ./configure.
* Don't remove it while cleaning up.
|
|
* quagga.info: Add generated file to CVS, as it requires most recent
texinfo to build, until such time as texinfo 4.7 is more
prevalent.
|
|
* routeserver.texi: Strip ctrl-M from line endings, note by
sigma@smx.pair.com
|
|
|
|
* Makefile.am: Add routeserver.texi to quagga_TEXINFOS.
Add quagga.info to clean files list (would have thought automake
would have done this, but it doesnt seem to)
|
|
* quagga.texi: include routeserver.texi. TODO: integrate the current
multiple-instance orientated bgpd route-server section with the
new route-server docs.
|
|
* Makefile.am: Add automatic rule to build pdf's from eps figures.
Clean *.pdf. Add rule for quagga.pdf (as the eps.pdf pattern
probably otherwise will override automake's rule for quagga.pdf)
* overview.texi: URL was causing TeX overfull, put on newline.
* quagga.texi: Put the copyright notice into @copying section, as
is proper. Strip trailling space from the main menu lines.
* rip(ng)?d.texi: Minor reformatting.
* Add the route server docs.
* bgpd.texi: remove unneeded page breaks. The 6Bone example
overflows though.
|
|
* Add the route server docs.
* routeserver.texi: new file, texinfo'fied and slightly modified
version of the original TeX from James Luis Rubio.
* fig-*.eps: new files, diagrammes.
|
|
* defines.texi.in: New file, texi variables should be set here,
autoconf substitution is available. Define common AUTHORS,
COPYRIGHT_YEAR and COPYRIGHT_STR vars.
* (global): Make use of makeinfo node pointer auto-creation
to avoid having to fully specify links for nodes, so we only have
to specify current node name - simplifies text slightly.
Remove extraneous newlines which appear to cause extra blank pages
to be added in output.
Update copyright strings which appear in various places to
use the new COPYRIGHT_STR texinfo variable.
Change url to uref, the former need not output an actual
hyperlink depending on version of texinfo, the latter should if
supported by the format (eg PDF).
* texinfo.tex: Update to a more recent version. previous file
was many many years old. This file should possibly be removed
altogether, and allowed to be installed by automake.
* quagga.texi: Make use of automake's version.texi feature to
have VERSION and some other vars auto-defined. include
defines.texi. Change copyright strings to use the COPYRIGHT_STR
variable.
* install.texi: Make the privs section an actual section. Ditto for
the Linux notes.
* overview.texi: Supply URL for Quagga, where format allows. Tidy up
one or two paragraphs slightly.
Update the section on supported platforms.
Remove the ZNOG list stuff, direct reader to the website for
further information on email lists.
* vtysh.texi: Update the integrated config file section. Make the
commands sections so correct PDF indexes are built.
|
|
|
|
with CVS trees.
|
|
|
|
|
