summaryrefslogtreecommitdiff
path: root/ripd
AgeCommit message (Collapse)Author
2009-06-02[snmp] Compiler warning fixes for when "--enable-snmp" is configured.Chris Caputo
Compiled on 32-bit and 64-bit linux gcc 4.1.2 platforms. No run-time testing on 32-bit and limited run-time testing on 64-bit.
2009-06-02[ripd] Fix metrix in call to rip_zebra_ipv4_deleteKrisztian Kovacs
Fix a potential problem (most probably not triggering a real problem, at least on Linux). When an interface goes down and ripd tries to delete the corresponding route it errorneously passes the interface's index instead of the metric to zebra.
2008-08-25Make --enable-snmp cross compile and make libcrypto optional with ↵Joakim Tjernlund
--without-crypto Autoconfig work by me, the rest was done by "Kirill K. Smirnov" <lich@math.spbu.ru>
2008-08-22[administrivia] Update gitignore filesPaul Jakma
- Add more stuff, archive libraries, etc..
2008-08-22[administrivia] Git should ignore backup files and .loT filesPaul Jakma
2008-08-22[trivia] Remove ChangeLog files, as this data is now maintained in SCMPaul Jakma
2008-08-22[lib] mes_lookup string lookup table argument should be marked constStephen Hemminger
2008-08-14 Stephen Hemminger <stephen.hemminger@vyatta.com> * lib/log.{c,h}: struct message argument should point to const * */*.c: adjust to suit, Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[build] Test for GNU-style PIE support in toolchain and enablePaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: add a configure flag and autoconf macro, which will determine if your toolchain supports PIE. * */Makefile.am: add corresponding CFLAGS and LDFLAGS into appropriate places. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[administrivia] Add .gitignore files, based on .cvsignores.Paul Jakma
2008-05-29[ripd] Fix mistaken empty string testPaul Jakma
2008-05-29 Stephen Hemminger <stephen.hemminger@vyatta.com> * ripd.c: (rip_auth_md5) fix bogus empty string test
2008-05-29[daemons] Sanity check port number arguments before usePaul Jakma
2008-05-29 Martin Nagy <mnagy@redhat.com> * */*main.c: Sanity check port numbers before using.
2008-03-13[ripd] remove unnecessary 0 entries from struct message'sPaul Jakma
2008-03-13 Paul Jakma <paul.jakma@sun.com> * ripd.c/rip_interface.c: Remove 0 entries from rip_msg ri_version_msg struct message's, not needed with recent fixes to mes_lookup.
2007-05-10[autoconf] bugs 162,303,178: Fix 'present but can not be compiled' warningsPaul Jakma
2007-05-09 Paul Jakma <paul.jakma@sun.com> * configure.ac: sys/conf.h depends on sys/param.h, at least on FBSD 6.2. (bug #363) Should check for in_pktinfo for IRDP 2006-05-27 Paul Jakma <paul.jakma@sun.com> * configure.ac: General cleanup of header and type checks, introducing an internal define, QUAGGA_INCLUDES, to build up a list of stuff to include so as to avoid 'present but cant be compiled' warnings. Misc additional checks of things missing according to autoscan. Add LIBM, for bgpd's use of libm, so as to avoid burdening LIBS, and all the binaries, with libm linkage. Remove the bad practice of using m4 changequote(), just quote the []'s in the case statements properly. This should fix bugs 162, 303 and 178. * */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN, * bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
2007-04-27[ripd, ripngd] Remove useless code in rip_vty_out_uptime functionAndrew J. Schorr
2007-04-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd/ripd.c: (rip_vty_out_uptime) Remove unused variable timer_now. * ripngd/ripngd.c: (ripng_vty_out_uptime) Remove unused variable timer_now.
2007-04-11Fix the display of route timeout in "show ip rip". (Use ↵Vincent Jardin
thread_timer_remain_second)
2007-03-21[ripd] Fix "show ip rip status" display of time until next updateAndrew J. Schorr
2007-03-21 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd.c: (show_ip_rip_status) Use new thread_timer_remain_second function instead of rip_next_thread_timer to display the time until next update properly. (rip_next_thread_timer) Remove obsolete function.
2006-12-12[PtP over ethernet] New peer flag allows much more addressing flexibilityAndrew J. Schorr
2006-12-12 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * if.h: (struct connected) Add new ZEBRA_IFA_PEER flag indicating whether a peer address has been configured. Comment now shows the new interpretation of the destination addr: if ZEBRA_IFA_PEER is set, then it must contain the destination address, otherwise it may contain the broadcast address or be NULL. (CONNECTED_DEST_HOST,CONNECTED_POINTOPOINT_HOST) Remove obsolete macros that were specific to IPv4 and not fully general. (CONNECTED_PEER) New macro to check ZEBRA_IFA_PEER flag. (CONNECTED_PREFIX) New macro giving the prefix to insert into the RIB: if CONNECTED_PEER, then use the destination (peer) address, else use the address field. (CONNECTED_ID) New macro to come up with an identifying address for the struct connected. * if.c: (if_lookup_address, connected_lookup_address) Streamline logic with new CONNECTED_PREFIX macro. * prefix.h: (PREFIX_COPY_IPV4, PREFIX_COPY_IPV6) New macros for better performance than the general prefix_copy function. * zclient.c: (zebra_interface_address_read) For non-null destination addresses, set prefixlen to equal the address prefixlen. This is needed to get the new CONNECTED_PREFIX macro to work properly. * connected.c: (connected_up_ipv4, connected_down_ipv4, connected_up_ipv6, connected_down_ipv6) Simplify logic using the new CONNECTED_PREFIX macro. (connected_add_ipv4) Set prefixlen in destination addresses (required by the CONNECTED_PREFIX macro). Use CONNECTED_PEER macro instead of testing for IFF_POINTOPOINT. Delete invalid warning message. Warn about cases where the ZEBRA_IFA_PEER is set but no destination address has been supplied (and turn off the flag). (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. If peer/broadcast address satisfies IN6_IS_ADDR_UNSPECIFIED, then reject it with a warning. Set prefixlen in destination address so CONNECTED_PREFIX will work. * connected.h: (connected_add_ipv6) Add new flags argument so callers may set the ZEBRA_IFA_PEER flag. * interface.c: (connected_dump_vty) Use CONNECTED_PEER macro to decide whether the destination address is a peer or broadcast address (instead of checking IFF_BROADCAST and IFF_POINTOPOINT). * if_ioctl.c: (if_getaddrs) Instead of setting a peer address only when the IFF_POINTOPOINT is set, we now accept a peer address whenever it is available and not the same as the local address. Otherwise (no peer address assigned), we check for a broadcast address (regardless of the IFF_BROADCAST flag). And must now pass a flags value of ZEBRA_IFA_PEER to connected_add_ipv4 when a peer address is assigned. The same new logic is used with the IPv6 code as well (and we pass the new flags argument to connected_add_ipv6). (if_get_addr) Do not bother to check IFF_POINTOPOINT: just issue the SIOCGIFDSTADDR ioctl and see if we get back a peer address not matching the local address (and set the ZEBRA_IFA_PEER in that case). If there's no peer address, try to grab SIOCGIFBRDADDR regardless of whether IFF_BROADCAST is set. * if_ioctl_solaris.c: (if_get_addr) Just try the SIOCGLIFDSTADDR ioctl without bothering to check the IFF_POINTOPOINT flag. And if no peer address was found, just try the SIOCGLIFBRDADDR ioctl without checking the IFF_BROADCAST flag. Call connected_add_ipv4 and connected_add_ipv6 with appropriate flags. * if_proc.c: (ifaddr_proc_ipv6) Must pass new flags argument to connected_add_ipv6. * kernel_socket.c: (ifam_read) Must pass new flags argument to connected_add_ipv6. * rt_netlink.c: (netlink_interface_addr) Copy logic from iproute2 to determine local and possible peer address (so there's no longer a test for IFF_POINTOPOINT). Set ZEBRA_IFA_PEER flag appropriately. Pass new flags argument to connected_add_ipv6. (netlink_address) Test !CONNECTED_PEER instead of if_is_broadcast to determine whether the connected destination address is a broadcast address. * bgp_nexthop.c: (bgp_connected_add, bgp_connected_delete) Simplify logic by using new CONNECTED_PREFIX macro. * ospf_interface.c: (ospf_if_is_configured, ospf_if_lookup_by_prefix, ospf_if_lookup_recv_if) Simplify logic using new CONNECTED_PREFIX macro. * ospf_lsa.c: (lsa_link_ptop_set) Using the new CONNECTED_PREFIX macro, both options collapse into the same code. * ospf_snmp.c: (ospf_snmp_if_update) Simplify logic using new CONNECTED_ID macro. (ospf_snmp_is_if_have_addr) Simplify logic using new CONNECTED_PREFIX macro. * ospf_vty.c: (show_ip_ospf_interface_sub) Use new CONNECTED_PEER macro instead of testing the IFF_POINTOPOINT flag. * ospfd.c: (ospf_network_match_iface) Use new CONNECTED_PEER macro instead of testing with if_is_pointopoint. And add commented-out code to implement alternative (in my opinion) more elegant behavior that has no special-case treatment for PtP addresses. (ospf_network_run) Use new CONNECTED_ID macro to simplify logic. * rip_interface.c: (rip_interface_multicast_set) Use new CONNECTED_ID macro to simplify logic. (rip_request_interface_send) Fix minor bug: ipv4_broadcast_addr does not give a useful result if prefixlen is 32 (we require a peer address in such cases). * ripd.c: (rip_update_interface) Fix same bug as above.
2006-10-15[daemon startup] Add --dry-run/-C argument to daemons, to check config file ↵Paul Jakma
syntax 2006-10-04 Oliver Hookins <ohookins@gmail.com> * bgpd/bgp_main.c: Add configuration check option, with '-C' rather than '-c' for consistency between daemons. * isisd/isis_main.c: ditto * ospf6d/ospf6_main.c: ditto * ospfd/ospf_main.c: ditto * ripngd/ripng_main.c: ditto * vtysh/vtysh_main.c: ditto * ripd/rip_main.c: Change the config check option to '-C' and tidy up the code. * zebra/main.c: ditto 2006-10-04 Stergiakis Alexandros <astergiakis@antcor.com> * ripd/rip_main.c: This trivial patch introduces a new command-line option '-c', which instructs zebra/ripd to check its configuration file for validity, print any error message, and then exit. This is useful when the configuration file is edited by hand or otherwise, and you simply want to validate it without any other effect. * zebra/main.c: ditto
2006-09-11[ripd] bug #293: routemap set metric doesn't check for underflow correctlyPaul Jakma
2006-09-11 Paul Jakma <paul.jakma@sun.com> * rip_routemap.c: (route_set_metric) underflow check needs to use signed, problem identified and diagnosed by Pavel Nikiforov in bug #293.
2006-09-11[ripd] bug #278: remove gratuitous use of mid-function declarationPaul Jakma
2006-09-11 Paul Jakma <paul.jakma@sun.com> * ripd.c: (rip_read) remove gratuitous use of mid-function declaration of vrecv, bug #278.
2006-06-30[ripd] update to use auto-generated redistribute route-type defsPaul Jakma
2006-06-29 Paul Jakma <paul.jakma@sun.com> * rip_zebra: (general) convert redistribute commands to use the auto-generated defines.
2006-05-04[ripd] bugs #261, #262: Fix RIPv1 info-leak and unauthenticated route updatesPaul Jakma
2006-05-04 Paul Jakma <paul.jakma@sun.com> * (general) Fixes for bugs #261 and 262. Thanks to Konstantin V. Gavrilenko <kos@arhont.com> for the problem reports, testing of a series of proposed patches and comment on the proposed changes in behaviour. * rip_interface.c: (ip_rip_authentication_mode_cmd) Parse all of the command before making any changes to configured state. * ripd.c: (rip_read) RIP version control should be absolute and always apply, fixes bug #261 by allowing RIPv1 to be disabled. Fix bug #262: If authentication is enabled, then unauthenticated packets should not be accepted. We do however make an exception for RIPv1 REQUEST packets, to which we will reply as RIPv1 can now be disabled fully, to allow ripd to still provide routing /information/ to simple devices.
2006-04-28[ripd] Fix logic to send updates on all connected addresses.Andrew J. Schorr
2006-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * ripd.c: (rip_update_process) Try to fix the logic for sending an updated on each connected network. The new code will attempt to send the update on each connected network, whereas the previous code seemed to be attempting to avoid sending more than one RIPv1 update on a given interface, but was coded incorrectly. The actual effect of the old code was to send an update only on the first connected address in the cases where the interface is not multicast, or RIPv2 is not being used.
2006-01-30ripd.c: correct bug that allowed route learnt through RIP to take precedence ↵vincent
over connected routes
2006-01-19[compiler] miscellaneous trivial compiler warning fixespaul
2006-01-19 Paul Jakma <paul.jakma@sun.com> * (general) various miscellaneous compiler warning fixes. Remove redundant break statements from switch clauses which return. return from main, not exit, cause it annoys SOS. Remove stray semi-colons which cause empty-statement warnings. * zebra/main.c: (sighup) remove private declaration of external function.
2006-01-17[ripd] Fix verification of received MD5 authenticated packetspaul
2006-01-17 Paul Jakma <paul.jakma@sun.com> * ripd.c: (rip_auth_md5) remove pdigest, not needed. Use a local buffer for the auth_str, where it can be properly nul padded. Do so, hence fixing MD5 authentication. Key looked up via key ring should be used in preference to the RIPv1 simple password, not other way around. No need to copy around digests, we can reference them directly. The auth_len received can't be trusted, some implementations lie (e.g. older ripd). (rip_auth_md5_ah_write) rename len local variable to doff to be consistent with other functions. (rip_auth_header_write) add the missing return. (rip_auth_md5_set) use the proper constructs to access stream.
2005-10-302005-10-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* ripd.c: (rip_response_process) Instead of calling rip_interface.c:if_valid_neighbor(), call the equivalent library function if_lookup_address(). * rip_interface.c: (if_valid_neighbor) Remove function, since it is essentially equivalent to the if_lookup_address() library function. * ripd.h: (if_valid_neighbor) Remove function declaration.
2005-10-282005-10-28 Paul Jakma <paul.jakma@sun.com>paul
* Makefile.am: Add rip_interface.h, or else it doesn't get included in dists.
2005-10-252005-10-26 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: Update couple more functions to specify void explicitely.
2005-10-252005-10-26 Paul Jakma <paul.jakma@sun.com>paul
* (general) static/extern functions and definitions. * rip_interface.h: new file, export the public functions from rip_interface.c
2005-10-192005-10-17 Vincent Jardin <vincent.jardin@6wind.com>jardin
* ripd.c: rip_create_socket() for each packet, it does not bind to the proper interfaces because we forget to use the from address when it is specified.
2005-10-062005-10-06 Alain Ritoux <alain.ritoux@6wind.com>vincent
* rip_interface.c: Now the command "no ip rip split-horizon poisoned-reverse" just inhibates the poisoned-reverse effects but keep spli-horizon activ.
2005-10-012005-10-01 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* zebra.h: Declare new functions zebra_route_string() and zebra_route_char(). * log.c: (zroute_lookup,zebra_route_string,zebra_route_char) New functions to map zebra route numbers to strings. * zebra_vty.c: (route_type_str) Remove obsolete function: use new library function zebra_route_string() instead. Note that there are a few differences: for IPv6 routes, we now get "ripng" and "ospf6" instead of the old behavior ("rip" and "ospf"). (route_type_char) Remove obsolete function: ues new library function zebra_route_char() instead. Note that there is one difference: the old function returned 'S' for a ZEBRA_ROUTE_SYSTEM route, whereas the new one returns 'X'. (vty_show_ip_route_detail,vty_show_ipv6_route_detail) Replace route_type_str() with zebra_route_string(). (vty_show_ip_route,vty_show_ipv6_route) Replace route_type_char() with zebra_route_char(). * bgp_vty.c: (bgp_config_write_redistribute) Use new library function zebra_route_string instead of a local hard-coded table. * ospf6_asbr.c: Remove local hard-coded tables zroute_name and zroute_abname. Change the ZROUTE_NAME macro to use new library function zebra_route_string(). Remove the ZROUTE_ABNAME macro. (ospf6_asbr_external_route_show): Replace ZROUTE_ABNAME() with a call to zebra_route_char(), and be sure to fix the format string, since we now have a char instead of a char *. * ospf6_zebra.c: Remove local hard-coded tables zebra_route_name and zebra_route_abname. Note that the zebra_route_name[] table contained mixed-case strings, whereas the zebra_route_string() function returns lower-case strings. (ospf6_zebra_read_ipv6): Change debug message to use new library function zebra_route_string() instead of zebra_route_name[]. (show_zebra): Use new library function zebra_route_string() instead of zebra_route_name[]. * ospf_dump.c: Remove local hard-coded table ospf_redistributed_proto. (ospf_redist_string) New function implemented using new library function zebra_route_string(). Note that there are a few differences in the output that will result: the new function returns strings that are lower-case, whereas the old table was mixed case. Also, the old table mapped ZEBRA_ROUTE_OSPF6 to "OSPFv3", whereas the new function returns "ospf6". * ospfd.h: Remove extern struct message ospf_redistributed_proto[], and add extern const char *ospf_redist_string(u_int route_type) instead. * ospf_asbr.c: (ospf_external_info_add) In two messages, use ospf_redist_string instead of LOOKUP(ospf_redistributed_proto). * ospf_vty.c: Remove local hard-coded table distribute_str. (config_write_ospf_redistribute,config_write_ospf_distribute): Use new library function zebra_route_string() instead of distribute_str[]. * ospf_zebra.c: (ospf_redistribute_set,ospf_redistribute_unset, ospf_redistribute_default_set,ospf_redistribute_check) In debug messages, use ospf_redist_string() instead of LOOKUP(ospf_redistributed_proto). * rip_zebra.c: (config_write_rip_redistribute): Remove local hard-coded table str[]. Replace str[] with calls to new library function zebra_route_string(). * ripd.c: Remove local hard-coded table route_info[]. (show_ip_rip) Replace uses of str[] with calls to new library functions zebra_route_char and zebra_route_string. * ripng_zebra.c: (ripng_redistribute_write) Remove local hard-coded table str[]. Replace str[i] with new library function zebra_route_string(i). * ripngd.c: Remove local hard-coded table route_info[]. (show_ipv6_ripng) Use new library function zebra_route_char() instead of table route_info[].
2005-09-292005-09-29 Paul Jakma <paul.jakma@sun.com>paul
* configure.ac: Add the test for Solaris least-privileges. Set defines for whether capabilities are supported and whether of the linux or solaris variety. Add missing-prototypes, missing-declarations, char-subscripts and cast-qual warnings to default cflags, cause Hasso enjoys warnings, and we really should clean the remaining ones up. (ie isisd..). * (*/*main.c) Update the zebra_capabilities_t arrays in the various daemons to match the changes made in lib/privs.h. * zebra.h: Solaris capabilities requires priv.h to be included. * privs.{c,h}: Add support for Solaris Least-Privileges. privs.h: Reduce some of the abstract capabilities, which do not have rough equivalents on both systems. Rename the net related caps to _NET, as they should have been in first place. (zprivs_terminate) should take the zebra_privs_t as argument so that it can update change pointer. Add an additional privilege state, ZPRIVS_UNKNOWN. * privs.c: (various capability functions) Add Solaris privileges variants. (zprivs_state) Use privs.c specific generic types to represent various capability/privilege related types, so that each can be typedef'd as appropriate on each platform. (zprivs_null_state) static added, to hold the state the null method should report (should be raised by default, and LOWERED if zprivs_terminate has been called) (zprivs_state_null) Report back the zprivs_null_state. (cap_map) Make it able to map abstract capability to multiple system capabilities. (zcaps2sys) Map to abstract capabilities to multiple system privileges/capabilities. (zprivs_init) move capability related init to seperate function, zprivs_caps_init. (zprivs_terminate) ditto, moved to zprivs_caps_terminate. Set the change_state callback to the NULL state, so the user can continue to run and use the callbacks.
2005-09-292005-09-29 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/filer.c: show protocol name in filter_show() * lib/plist.c: show protocol name in vty_show_prefix_entry() * routemap.c: show protocol name in vty_show_route_map_entry() * lib/vty.c: in vty_command(), show protocol name if command unknown * zebra/zserv.c: Always provide distance fo route add * ripd/rip_snmp.c: rip2IfConfReceive() sends values in conformance with RFC. Also PeerDomain is now set to a STRING type. * ripd/ripd.h: rip_redistribute_add() API includes metric and distance * ripd/ripd.c: rip_redistribute_add() API i.e. stores metric and distance Now allows a RIP-route to overcome a redistributed route coming from a protocol with worse (higher) administrative distance Metrics from redistribution are shown in show ip rip * ripd/rip_zebra.c: adapt to the rip_redistribute_add() API, i.e. provide distance and metric * ripd/rip_interface.c: adapt to the rip_redistribute_add() API * ripd/rip_routemap.c: no RMAP_COMPILE_ERROR on (metric > 16) usage rather a CMD_WARNING, because set metric ius shared with other protocols using larger values (such as OSPF) The match metric action takes first external metric if present (from redistribution) then RIP metric.
2005-09-282005-09-28 Alain Ritoux <alain.ritoux@6wind.com>vincent
* lib/md5-gnu.h: removed * lib/md5.h: replaces md5-gnu.h * lib/Makefile.am: use correct md5.h * lib/md5.c: import from WIDE * ospfd/ospf_packet.c: use new md5 API * ripd/ripd.c: use new md5 API
2005-08-162005-08-16 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: (general) Fix previous commit, broke multicast bind and hence setting of source port, which broke communication with non-borken ripd. Fix removes more stuff from rip_interface.c than it adds to ripd.c ;) (rip_create_socket) the to argument really is a from argument, rename it. Set the source port to RIP port unconditionally, it's required. (rip_send_packet) Set from address correctly for multicast. (rip_output_process) trivial: num can be BSS specified, rather than in body. * rip_interface.c: (rip_interface_multicast_set) strip out redundant stuff related to bind, which rip_create_socket does. Just make it set the multicast socket option, as per the interface concerned, no more.
2005-06-032005-06-03 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: (rip_create_socket) Make it static. Remove the getservbyname stuff, as RFC2453 3.9.2 says non-RIP port messages should be discarded, quagga doesnt accept them, no need to lookup port. Take a 'to' argument, if socket should be bound to something else. setsockopt_so_recvbuf might need privs, move it to the raised privileges section. dont forget to close the socket if bind fails. (rip_send_packet) use strncpy, just in case (address is under our control anyway, but still). dont duplicate rip_create_socket - just use it. (rip_create) rip_create_socket takes an argument now, modify.
2005-06-032005-06-03 Paul Jakma <paul.jakma@sun.com>paul
* ripd.c: (rip_create_socket) move it up so rip_send_packet can use it too.
2005-06-022005-06-01 Paul Jakma <paul.jakma@sun.com>paul
* rip_interface.c: Fix authentication, no-auth impossible to specify (rip_interface_new) default to RIP_NO_AUTH (rip_interface_reset) ditto (rip_interface_config_write) write out config for simple
2005-05-292005-05-29 Paul Jakma <paul@dishone.st>paul
* ripd.c: (rip_output_process) fix error which crept in my previous rip auth untanglement commit - it had become impossible to not have authentication (even for v1).
2005-05-28Sync bgpd and ripd set_metric_addsub_cmd commands. Fixes bugzilla #192.hasso
[backport candidate]
2005-05-26 * rip_routemap.c: In case of '0.0.0.0' used as 'nexthop', use senderhasso
address as nexthop in routemap. Fixes bugzilla #186. [backport candidate]
2005-05-25 * rip_routemap.c: Make "match interface" routemap command match both -hasso
in and out interfaces. Fixes bugzilla #185. [backport candidate]
2005-05-112005-05-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* rip_interface.c (rip_interface_add): Need to call rip_passive_interface_apply (was already calling it in rip_interface_up). [backport candidate]
2005-04-112005-04-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
Implement non-blocking zclient I/O with buffering. * zclient.h (struct zclient): Add two fields to support non-blocking I/O: struct buffer *wb, and struct thread *t_write. (zclient_free): Remove function. (zebra_redistribute_send): Change 2nd arg from socket fd to struct zclient * (needed to support non-blocking I/O and buffering). (zclient_send_message): New function to send an arbitrary message with non-blocking I/O. * zclient.c (zclient_new): Create write buffer. (zclient_free): Remove unused function. (zclient_stop): Must cancel new t_write thread. Also, reset all buffers: ibuf, obuf, and wb. (zclient_failed): New helper function for typical error handling. (zclient_flush_data): New thread to flush queued data. (zclient_send_message): New function to send the message in zclient->obuf to zebra using non-blocking I/O and buffering. (zebra_message_send, zapi_ipv4_route, zapi_ipv6_route): Use new zclient_send_message function instead of calling writen. (zclient_start): Set socket non-blocking. Also, change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. (zebra_redistribute_send): Change 2nd arg to struct zclient *. Can now use zclient->obuf to assemble the message instead of allocating a temporary stream. And call zclient_send_message to send the message instead of writen. (zclient_read): Convert to support non-blocking I/O by using stream_read_try instead of deprecated stream_read. (zclient_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf6_zebra.c (ospf6_zebra_redistribute, ospf6_zebra_no_redistribute): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ospf_zebra.c (ospf_zebra_add): Call zclient_send_message instead of writen. * rip_zebra.c (rip_redistribute_set, rip_redistribute_unset, rip_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * ripng_zebra.c (ripng_redistribute_unset, ripng_redistribute_clean): Change 2nd arg to zebra_redistribute_send from zclient->sock to zclient. * bgp_zebra.c (bgp_redistribute_set, bgp_redistribute_unset): The 2nd arg to zebra_redistribute_send is now zclient instead of zclient->sock. * isis_zebra.h (isis_zebra_finish): Remove declaration of unused function. * isis_zebra.c (isis_zebra_route_add_ipv4): Call zclient_send_message to send the message to zebra instead of calling writen directly, since zclient_send_message understands non-blocking I/O and will manage the buffer queue appropriately. (isis_zebra_finish): Remove unused function, particularly since the zclient_free function has been removed.
2005-04-072005-04-07 Paul Jakma <paul.jakma@sun.com>paul
* (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
2005-04-022005-04-02 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
Fix problems when netlink interfaces are renamed (same ifindex used for a new interface). Start cleaning up some problems with the way interface names are handled. * interface.c: (if_new_intern_ifindex) Remove obsolete function. (if_delete_update) After distributing the interface deletion message, set ifp->ifindex to IFINDEX_INTERNAL. (if_dump_vty) Detect pseudo interface by checking if ifp->ifindex is IFINDEX_INTERNAL. (zebra_interface) Check return code from interface_cmd.func. Do not set internal ifindex values to if_new_intern_ifindex(), since we now use IFINDEX_INTERNAL for all pseudo interfaces. * kernel_socket.c: (ifm_read) Fix code and comments to reflect that all internal interfaces now have ifp->ifindex set to IFINDEX_INTERNAL. * rt_netlink.c: (set_ifindex) New function used to update ifp->ifindex. Detects interface rename events by checking if that ifindex is already being used. If it is, delete the old interface before assigning the ifindex to the new interface. (netlink_interface, netlink_link_change) Call set_ifindex to update the ifindex. * if.h: Remove define for IFINDEX_INTERNBASE and add define IFINDEX_INTERNAL 0, since all internal (i.e. non-kernel) pseudo- interfaces should have ifindex set to 0. (if_new) Remove function. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (ifname2ifindex) New function. * if.c: (if_new) Remove function (absorb into if_create). (if_create) Replace function if_new with call to calloc. Set ifp->ifindex to IFINDEX_INTERNAL. Fix off-by-one error in assert to check length of interface name. Add error message if interface with this name already exists. (if_delete_retain) New function to delete an interface without removing from iflist and freeing the structure. (if_delete) Implement with help of if_delete_retain. (ifindex2ifname) Reimplement using if_lookup_by_index. (ifname2ifindex) New function to complement ifindex2ifname. (interface) The interface command should check the name length and fail with a warning message if it is too long. (no_interface) Fix spelling in warning message. (if_nametoindex) Reimplement using if_lookup_by_name. (if_indextoname, ifaddr_ipv4_lookup) Reimplement using if_lookup_by_index. * bgp_zebra.c: (bgp_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * isis_zebra.c: (isis_zebra_if_del) Call if_delete_retain instead of if_delete, since it is generally not safe to remove interface structures. After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Tighten up code. * ospf6_zebra.c: (ospf6_zebra_if_del) Previously, this whole function was commented out. But this is not safe: we should at least update the ifindex when the interface is deleted. So the new version updates the interface status and sets ifp->ifindex to IFINDEX_INTERNAL. (ospf6_zebra_route_update) Use if_indextoname properly. * ospf_vty.c: (show_ip_ospf_interface_sub) Show ifindex and interface flags to help with debugging. * ospf_zebra.c: (ospf_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. (zebra_interface_if_lookup) Make function static. Tighten up code. * rip_interface.c: (rip_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL. * ripng_interface.c: (ripng_interface_delete) After deleting, set ifp->ifindex to IFINDEX_INTERNAL.
2005-03-28 * configure.ac, */Makefile.am: Fix previous commit. SNMP includeshasso
must be after lib/ includes in some systems. Introduce SNMP_INCLUDES for that.
2005-03-142005-03-14 Paul Jakma <paul.jakma@sun.com>paul
* (global) update all c files to match the lib/vector.h rename of (struct vector).active to max, and vector_max macro to vector_active. * lib/vector.h: Rename to (struct vector).max to slightly less confusing active, for the number of active slots, distinct from allocated or active-and-not-empty. Rename vector_max to vector_active for same reason.