summaryrefslogtreecommitdiff
path: root/vtysh
AgeCommit message (Collapse)Author
2009-06-23Fix vtysh based "write term" output.Chris Caputo
* vtysh/vtysh.c: "end" should be printed at the bottom, not the top. * vtysh/vtysh_config.c: PROTOCOL_NODE was not being handled, and thus was being displayed at the top of a config, rather than in its rightful place near the bottom. Signed-off-by: Chris Caputo <ccaputo@alt.net>
2009-06-18[vtysh] Add a --noerror optionStephen Hemminger
There are times that configuration scripts want to run vtysh but don't want to get error messages or failed exit status
2009-06-18[vtysh] Return non-zero exit code on error.Stephen Hemminger
If passed a bad command, return non-zero exit code
2009-06-18[vtysh] Make vtysh more useable for scriptingStephen Hemminger
Add environment variable (VTYSH_LOG) for logging. If a command fails, exit with non-zero exit code and don't continue multipart commands.
2009-06-18[vtysh] Force line buffered mode.Stephen Hemminger
Vtysh is used in pipelines and it helps if the output starts right away instead of waiting for a whole buffer to fill.
2009-06-12[cleanup] Make command nodes staticStephen Hemminger
The cmd_nodes used to configure vty, can mostly be static so (basic data hiding 101).
2009-06-12[cleanup] Convert XMALLOC/memset to XCALLOCStephen Hemminger
Simple conversion of XMALLOC/memset to XCALLOC
2008-10-04[vtysh] Add commands from zebra_routemap.c to vtyshBartek Kania
* Makefile.am: vtysh should also pull in commands from zebra_routemap.c Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[administrivia] Git should ignore backup files and .loT filesPaul Jakma
2008-08-22[trivia] Remove ChangeLog files, as this data is now maintained in SCMPaul Jakma
2008-08-22[build] Test for GNU-style PIE support in toolchain and enablePaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: add a configure flag and autoconf macro, which will determine if your toolchain supports PIE. * */Makefile.am: add corresponding CFLAGS and LDFLAGS into appropriate places. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[administrivia] Add .gitignore files, based on .cvsignores.Paul Jakma
2008-07-03[vtysh] small fix to previous CMD_AS_RANGE patch, and add missing commandPaul Jakma
2008-07-03 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> * extract.pl.in: Fix as-range to match CPP output. * vtysh.c: Add missing router_bgp_view_cmd alias.
2008-07-02[vty] CMD_AS_RANGE accidently quoted and so not expanded in vtyPaul Jakma
2008-07-02 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> * *.c: CMD_AS_RANGE was being used inside command strings, and thus not being expanded, fix by dequoting.
2007-10-14[bgpd] Merge AS4 supportPaul Jakma
2007-10-14 Paul Jakma <paul.jakma@sun.com> * NEWS: Note that MRT dumps are now version 2 * (general) Merge in Juergen Kammer's AS4 patch. 2007-09-27 Paul Jakma <paul.jakma@sun.com> * bgp_aspath.c: (assegment_normalise) remove duplicates from from sets. (aspath_reconcile_as4) disregard a broken part of the RFC around error handling in path reconciliation. * aspath_test.c: Test dupe-weeding from sets. Test that reconciliation merges AS_PATH and AS4_PATH where former is shorter than latter. 2007-09-26 Paul Jakma <paul.jakma@sun.com> * aspath_test.c: Test AS4_PATH reconcilation where length of AS_PATH and AS4_PATH is same. 2007-09-25 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (peek_for_as4_capability) Fix to work. * bgp_packet.c: (bgp_open_receive) Fix sanity check of as4. * tests/bgp_capability_test.c: (general) Extend tests to validate peek_for_as4_capability. Add test of full OPEN Option block, with multiple capabilities, both as a series of Option, and a single option. Add some crap to beginning of stream, to prevent code depending on getp == 0. 2007-09-18 Paul Jakma <paul.jakma@sun.com> * bgp_open.c: (bgp_capability_as4) debug printf inline with others. (peek_for_as4_capability) There's no need to signal failure, as failure is better dealt with through full capability parser - just return the AS4, simpler. * bgp_packet.c: (bgp_open_receive) Update to match peek_for_as4_capability change. Allow use of BGP_AS_TRANS by 2b speakers. Use NOTIFY_OPEN_ERR rather than CEASE for OPEN parsing errors. (bgp_capability_msg_parse) missing argument to debug print (bgp_capability_receive) missing return values. * tests/bgp_capability_test.c: (parse_test) update for changes to peek_for_as4_capability 2007-07-25 Paul Jakma <paul.jakma@sun.com> * Remove 2-byte size macros, just make existing macros take argument to indicate which size to use. Adjust all users - typically they want '1'. * bgp_aspath.c: (aspath_has_as4) New, return 1 if there are any as4's in a path. (aspath_put) Return the number of bytes actually written, to fix the bug Juergen noted: Splitting of segments will change the number of bytes written from that already written to the AS_PATH header. (aspath_snmp_pathseg) Pass 2-byte flag to aspath_put. SNMP is still defined as 2b. (aspath_aggregate) fix latent bug. (aspath_reconcile_as4) AS_PATH+NEW_AS_PATH reconciliation function. (aspath_key_make) Hash the AS_PATH string, rather than just taking the addition of assegment ASes as the hash value, hopefully sligthly more collision resistant. (bgp_attr_munge_as4_attrs) Collide the NEW_ attributes together with the OLD 2-byte forms, code Juergen had in bgp_attr_parse but re-organised a bit. (bgp_attr_parse) Bunch of code from Juergen moves to previous function. (bgp_packet_attribute) Compact significantly by just /always/ using extended-length attr header. Fix bug Juergen noted, by using aspath_put's (new) returned size value for the attr header rather than the (guesstimate) of aspath_size() - the two could differ when aspath_put had to split large segments, unlikely this bug was ever hit in the 'wild'. (bgp_dump_routes_attr) Always use extended-len and use aspath_put return for header length. Output 4b ASN for AS_PATH and AGGREGATOR. * bgp_ecommunity.c: (ecommunity_{hash_make,cmp}) fix hash callback declarations to match prototypes. (ecommunity_gettoken) Updated for ECOMMUNITY_ENCODE_AS4, complete rewrite of Juergen's changes (no asdot support) * bgp_open.c: (bgp_capability_as4) New, does what it says on the tin. (peek_for_as4_capability) Rewritten to use streams and bgp_capability_as4. * bgp_packet.c: (bgp_open_send) minor edit checked (in the abstract at least) with Juergen. Changes are to be more accepting, e.g, allow AS_TRANS on a 2-byte session. * (general) Update all commands to use CMD_AS_RANGE. * bgp_vty.c: (bgp_clear) Fix return vals to use CMD_.. Remove stuff replicated by VTY_GET_LONG (bgp_clear_vty) Return bgp_clear directly to vty. * tests/aspath_test.c: Exercise 32bit parsing. Test reconcile function. * tests/ecommunity_test.c: New, test AS4 ecommunity changes, positive test only at this time, error cases not tested yet. 2007-07-25 Juergen Kammer <j.kammer@eurodata.de> * (general) AS4 support. * bgpd.h: as_t changes to 4-bytes. * bgp_aspath.h: Add BGP_AS4_MAX and BGP_AS_TRANS defines. * bgp_aspath.c: AS_VALUE_SIZE becomes 4-byte, AS16_VALUE_SIZE added for 2-byte. Add AS16 versions of length calc macros. (aspath_count_numas) New, count number of ASes. (aspath_has_as4) New, return 1 if there are any as4's in a path. (assegments_parse) Interpret assegment as 4 or 2 byte, according to how the caller instructs us, with a new argument. (aspath_parse) Add use32bit argument to pass to assegments_parse. Adjust all its callers to pass 1, unless otherwise noted. (assegment_data_put) Adjust to be able to write 2 or 4 byte AS, according to new use32bit argument. (aspath_put) Adjust to write 2 or 4. (aspath_gettoken) Use a long for passed in asno. * bgp_attr.c: (attr_str) Add BGP_ATTR_AS4_PATH and BGP_ATTR_AS4_AGGREGATOR. (bgp_attr_aspath) Call aspath_parse with right 2/4 arg, as determined by received-capability flag. (bgp_attr_aspath_check) New, code previously in attr_aspath but moved to new func so it can be run after NEW_AS_PATH reconciliation. (bgp_attr_as4_path) New, handle NEW_AS_PATH. (bgp_attr_aggregator) Adjust to cope with 2/4 byte ASes. (bgp_attr_as4_aggregator) New, read NEW_AGGREGATOR. (bgp_attr_parse) Add handoffs to previous parsers for the two new AS4 NEW_ attributes. Various checks added for NEW/OLD reconciliation. (bgp_packet_attribute) Support 2/4 for AS_PATH and AGGREGATOR, detect when NEW_ attrs need to be sent. * bgp_debug.{c,h}: Add 'debug bgp as4'. * bgp_dump.c: MRTv2 support, unconditionally enabled, which supports AS4. Based on patches from Erik (RIPE?). * bgp_ecommunity.c: (ecommunity_ecom2str) ECOMMUNITY_ENCODE_AS4 support. * bgp_open.c: (peek_for_as4_capability) New, peek for AS4 capability prior to full capability parsing, so we know which ASN to use for struct peer lookup. (bgp_open_capability) Always send AS4 capability. * bgp_packet.c: (bgp_open_send) AS4 handling for AS field (bgp_open_receive) Peek for AS4 capability first, and figure out which AS to believe. * bgp_vty.c: (bgp_show_peer) Print AS4 cap * tests/aspath_test.c: Support asn32 changes, call aspath_parse with 16 bit. * vtysh/extract.pl: AS4 compatibility for router bgp ASNUMBER * vtysh/extract.pl.in: AS4 compatibility for router bgp ASNUMBER * vtysh/vtysh.c: AS4 compatibility for router bgp ASNUMBER
2007-06-20[vtysh] bug #371: vtysh forgets to print 'end' for write-terminalPaul Jakma
2007-06-20 Nicolas Deffayet <nicolas@deffayet.com> * vtysh.c: (vtysh_write_terminal) Write 'end' when done, to be consistent with telnet vty, and expected by tools like rancid.
2007-05-10[autoconf] bugs 162,303,178: Fix 'present but can not be compiled' warningsPaul Jakma
2007-05-09 Paul Jakma <paul.jakma@sun.com> * configure.ac: sys/conf.h depends on sys/param.h, at least on FBSD 6.2. (bug #363) Should check for in_pktinfo for IRDP 2006-05-27 Paul Jakma <paul.jakma@sun.com> * configure.ac: General cleanup of header and type checks, introducing an internal define, QUAGGA_INCLUDES, to build up a list of stuff to include so as to avoid 'present but cant be compiled' warnings. Misc additional checks of things missing according to autoscan. Add LIBM, for bgpd's use of libm, so as to avoid burdening LIBS, and all the binaries, with libm linkage. Remove the bad practice of using m4 changequote(), just quote the []'s in the case statements properly. This should fix bugs 162, 303 and 178. * */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN, * bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
2007-05-02[zebra] Routemap support on received routes, with 'set src' command (linux)Paul Jakma
2007-05-01 David L Stevens <dlstevens@us.ibm.com> * (general) These changes collectively add route-map and prefix-list support to zebra and fix a bug in "show route-map" (with no argument). * doc/main.texi: added route-map, prefix-list, ip protocol and set src documentation * lib/command.h: added PROTOCOL_NODE type * lib/log.c: (proto_name2num) new function, protocol name to number translation. * lib/routemap.c: (vty_show_route_map) fixed "show route-map" without route-map name * lib/routemap.h: added RMAP_ZEBRA type * lib/zebra.h: added proto_name2num() prototype * vtysh/extract.pl.in: added VTYSH_ZEBRA flag for route-map and plist * vtysh/Makefile.am: added zebra_routemap.c * vtysh/vtysh.h: added VTYSH_ZEBRA flag to VTYSH_RMAP * zebra/connected.c: (connected_up_ipv4) added src preference argument to rib_add_ipv4() * zebra/kernel_socket.c: (rtm_read) ditto * zebra/main.c: added prefix list initialization * zebra/Makefile.am: added zebra_routemap.c source file * zebra/rib.h: added generic address union "g_addr" and use in existing places that had an explicit union. Added "src" to struct nexthop. Added preferred src arg to nexthop_ipv4_add and rib_add_ipv4. * zebra/rt_netlink.c: (netlink_routing_table) set preferred source on netlink messages. (netlink_route_change) ditto (netlink_route_multipath) ditto. * zebra/rtread_getmsg.c: (handle_route_entry) added (NULL) src to rib_add_ipv4() call. * zebra/rtread_proc.c: (proc_route_read) ditto * zebra/zebra_rib.c: (nexthop_ipv4_add) add src argument. (nexthop_ipv4_ifindex_add) ditto (rib_add_ipv4) ditto (nexthop_active_check) Add route-map processing. * zebra/zebra_routemap.c: new file for zebra route-map commands. * zebra/zebra_vty.c: (ip_protocol_cmd) Apply route-map to protocol (vty_show_ip_route_detail) added "src" printing (vty_show_ip_route) ditto (show_ip_protocol_cmd) new command, list routemaps. (config_write_protocol) write out routemap protocl config. (zebra_vty_init) Install the new routemap protocol commands. * zebra/zserv.c: (zread_ipv4_add) added (NULL) src arg (zebra_init) init zebra route-maps. * zebra/zserv.h: add zebra_route_map_init
2007-04-29[logging] Add new "log timestamp precision" command for subsecond timestampsAndrew J. Schorr
2007-04-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vtysh.c: (vtysh_log_timestamp_precision, no_vtysh_log_timestamp_precision) Implement new log timestamp precision commands: send to all daemons. (vtysh_init_vty) Install new log timestamp precision commands.
2006-10-15[daemon startup] Add --dry-run/-C argument to daemons, to check config file ↵Paul Jakma
syntax 2006-10-04 Oliver Hookins <ohookins@gmail.com> * bgpd/bgp_main.c: Add configuration check option, with '-C' rather than '-c' for consistency between daemons. * isisd/isis_main.c: ditto * ospf6d/ospf6_main.c: ditto * ospfd/ospf_main.c: ditto * ripngd/ripng_main.c: ditto * vtysh/vtysh_main.c: ditto * ripd/rip_main.c: Change the config check option to '-C' and tidy up the code. * zebra/main.c: ditto 2006-10-04 Stergiakis Alexandros <astergiakis@antcor.com> * ripd/rip_main.c: This trivial patch introduces a new command-line option '-c', which instructs zebra/ripd to check its configuration file for validity, print any error message, and then exit. This is useful when the configuration file is edited by hand or otherwise, and you simply want to validate it without any other effect. * zebra/main.c: ditto
2006-07-27[vtysh] Never skip authentication, and add support for multiple -c commandsAndrew J. Schorr
2006-07-27 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * vtysh.1: Document new options -d and -E, and note that now multiple -c options may be supplied, with embedded linefeed now supported. In BUGS section, remove warning about vtysh causing a daemon to freeze, since this has been fixed. * vtysh_main.c: (usage) Add new -d and -E options. And note that -c can be used multiple times, possibly with embedded linefeeds. (longopts) Add new -d and -E options. (main) Add new -d and -E options, and create a linked list to support multiple -c options. Do not call vtysh_connect_all until after vtysh_read_config(config_default) and vtysh_auth have succeeded. This prevents the vtysh.conf file from configuring any daemons, and it ensures that authentication has been passed before we send any commands to any daemons. Call vtysh_connect_all with any daemon name supplied with -d. If it is unable to connect to any daemons, issue an error message and exit immediately. When used in -c mode, call vtysh_execute("enable") before executing the commands in order to match interactive behavior. And detect embedded linefeed chars in -c commands and break them up appropriately. * vtysh.h: (vtysh_connect_all) Fix proto to reflect new daemon_name argument, and that it now returns an integer -- the number of daemons to which we were able to connect. * vtysh.c: (vtysh_connect_all) Add a new daemon_name argument. If supplied, connect only to that daemon. And return the number of daemons to which we were able to connect. (vtysh_prompt): Performance enhancement -- make struct utsname static so we call uname to get the hostname only once.
2006-05-28[vtysh] Add "show memory" to vtyshPaul Jakma
2006-05-24 Paul Jakma <paul.jakma@sun.com> * vtysh.c: (general) Add 'show memory' command.
2006-05-23[vtysh] suppress output in 'show logging' for daemons not presentPaul Jakma
2006-05-21 Paul Jakma <paul.jakma@sun.com> * vtysh.c: (vtysh_show_logging_cmd) Suppress output for daemons which are not running (Andrew Schorr).
2006-05-23[vtysh] Add 'show logging' commandPaul Jakma
2006-05-17 Paul Jakma <paul.jakma@sun.com> * vtysh.c: (general) Add 'show logging' command.
2006-01-112006-01-11 Erik Smit <zoiah@zoiah.net>paul
* vtysh.c: (vtysh_config_from_file) fix regression from a previous cleanup, vtysh_client.flags and cmd->daemon are bitwise flags, bitwise & was meant to be used. Fixes breakage of integrated config file reading.
2005-09-15 * vtysh.c: Fix warning by casting rl_bind_key 2. argument correctly.hasso
* extract.pl.in: Fix warning - add isisd/topology to the includes.
2005-08-25 * configure.ac, vtysh/Makefile.am: Only vtysh needs to be linkedhasso
against libreadline and friends.
2005-08-222005-08-22 Hugo Santos <hsantos@av.it.pt>paul
* vtysh.c: Add support for BGP_IPV6M_NODE
2005-07-12- Fix ChangeLog entry to properly refer to problem being Linux/ARM, notpaul
ARM in general.
2005-07-122005-07-12 Christian Hammers <ch@debian.org>paul
* vtysh_user.c: rename struct user to struct vtysh_user to avoid clashes with sys/user.h on ARM.
2005-04-07 * extract.pl.in: Ignore "router zebra".hasso
2005-04-07 * Makefile.am: Remove rebuild4 target, it's not used any more by buildhasso
procedure. Define vtysh_cmd_FILES. Use EXTRA_DIST.
2005-04-072005-04-07 Paul Jakma <paul.jakma@sun.com>paul
* (global): Fix up list loops to match changes in lib/linklist, and some basic auditing of usage. * configure.ac: define QUAGGA_NO_DEPRECATED_INTERFACES * HACKING: Add notes about deprecating interfaces and commands. * lib/linklist.h: Add usage comments. Rename getdata macro to listgetdata. Rename nextnode to listnextnode and fix its odd behaviour to be less dangerous. Make listgetdata macro assert node is not null, NULL list entries should be bug condition. ALL_LIST_ELEMENTS, new macro, forward-referencing macro for use with for loop, Suggested by Jim Carlson of Sun. Add ALL_LIST_ELEMENTS_RO for cases which obviously do not need the "safety" of previous macro. LISTNODE_ADD and DELETE macros renamed to ATTACH, DETACH, to distinguish from the similarly named functions, and reflect their effect better. Add a QUAGGA_NO_DEPRECATED_INTERFACES define guarded section with the old defines which were modified above, for backwards compatibility - guarded to prevent Quagga using it.. * lib/linklist.c: fix up for linklist.h changes. * ospf6d/ospf6_abr.c: (ospf6_abr_examin_brouter) change to a single scan of the area list, rather than scanning all areas first for INTER_ROUTER and then again for INTER_NETWORK. According to 16.2, the scan should be area specific anyway, and further ospf6d does not seem to implement 16.3 anyway.
2005-03-28 * extract.pl.in: Use SNMP_INCLUDES to avoid warnings if compiling withhasso
snmp support.
2005-03-142005-03-14 Paul Jakma <paul.jakma@sun.com>paul
* (global) update all c files to match the lib/vector.h rename of (struct vector).active to max, and vector_max macro to vector_active. * lib/vector.h: Rename to (struct vector).max to slightly less confusing active, for the number of active slots, distinct from allocated or active-and-not-empty. Rename vector_max to vector_active for same reason.
2005-03-09 * vtysh_config.c: Move password commands to the AAA_NODE. Ithasso
quarantees that they will appear after SERVICE_NODE to make sure that encrypted passwords will work ("service password-encryption" command). [backport candidate]
2005-01-282005-01-28 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vtysh.h: Remove obsolete VTYSH_INDEX_* defines. Fix many prototypes for functions with no arguments (must specify argument list as void). * vtysh.c: Enhance vtysh_client array to include the daemon's name and bitmask and socket path (in addition to the fd). This allows us to use loop constructs for various operations that need to be applied to all client daemons, and it facilitates better error messages. Also fix some prototypes with void argument lists. (vclient_close) Issue a warning message indicating which daemon's socket is being closed. (vtysh_execute_func,vtysh_config_from_file) Use a for loop to call vtysh_client_execute. (vtysh_write_terminal,write_config_integrated) Use a for loop to call vtysh_client_config. (vtysh_write_memory) Use a for loop to call vtysh_client_execute. (vtysh_show_daemons) Use a for loop. (vtysh_connect) The struct vtysh_client is now statically initialized, so do not initialize it here. (vtysh_connect_all) Use a for loop to call vtysh_connect. Set ripd_client pointer for use in vtysh_exit_ripd_only.
2005-01-23 * lib/command.[ch]: Make node_parent() function nonstatic. vtyh.c willhasso
use it as well. * vtysh/vtysh.c: Implement walkup in node tree for vtysh as it already works in vty.
2005-01-23 * vtysh.conf.sample: Fix typo "integrated-vtysh-conf" ->hasso
"integrated-vtysh-config".
2005-01-16 * command.[ch], vty.c: cmd_execute_command() function must not attempthasso
to walk up in the node tree if called from vtysh. Different daemons might have commands with same syntax in different nodes (for example "router-id x.x.x.x" commands in zebra/ospfd/ospf6d daemons). * vtysh.c: Reflect changes in lib. cmd_execute_command() should know now that it's called from vtysh and must not attempt to walk up in the node tree. [pullup candidate]
2004-12-22More cosmetical vtysh fixes.hasso
2004-12-22No delimiter between "ip forwarding" and "ipv6 forwarding".hasso
2004-12-092004-12-09 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vtysh.c: (vtysh_connect) No reason to call geteuid and getegid, the results were never used.
2004-12-072004-12-07 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* bgp_main.c: (main) The 2nd argument to openzlog has been removed. * isis_main.c: (main) The 2nd argument to openzlog has been removed. * ospf6_main.c: (main) The 2nd argument to openzlog has been removed. Note that stdout logging will no longer be enabled by default when not running as a daemon. * ospf_main.c: (main) The 2nd argument to openzlog has been removed. * rip_main.c: (main) The 2nd argument to openzlog has been removed. * ripng_main.c: (main) The 2nd argument to openzlog has been removed. * main.c: (main) The 2nd argument to openzlog has been removed. So stdout logging will no longer be enabled by default. * irdp_main.c: (irdp_finish) Reduce severity of shutdown message from LOG_WARNING to LOG_INFO. * vtysh.c: Make several functions static instead of global. Added several commands to support destination-specific logging levels. (vtysh_completion) This function is unused, so comment it out. * basic.texi: Document new logging features. Separate basic config commands from basic VTY commands. * log.h: Replace struct zlog flags and maskpri fields with maxlvl array to support individual logging levels for each destination. Remove the 2nd argument to openzlog since the default logging config should be standardized inside the library. Replaced the zlog_set_flag and zlog_reset_flag functions with zlog_set_level. And zlog_set_file now requires an additional log_level argument. Declare zlog_proto_names for use inside command.c in the "show logging" command. Added defines useful for command construction. * log.c: (vzlog) Decide where to send the message based on the individual logging levels configured for each destination. Remove support for ZLOG_STDERR since it was never actually used. Support record-priority for terminal monitors. (zlog_signal,zlog_backtrace_sigsafe) Support destination-specific logging levels. Remove stderr support (was never used). Added support for terminal monitor logging. (_zlog_assert_failed) Increase message severity to LOG_EMERG. (openzlog) Remove 2nd argument since default config should be standardized in library. By default, terminal monitoring is set to debug, and all other logging is disabled. (zlog_set_flag,zlog_reset_flag) Removed. (zlog_set_level) New function to replace zlog_set_flag and zlog_reset_flag. Supports destination-specific logging levels. (zlog_set_file,zlog_reset_file) Support file-specific logging level. (zlog_rotate) Log an error message if fopen fails, and support new file-specific logging level. * command.h: Change DEFUN_CMD_FUNC_DECL and DEFUN_CMD_FUNC_TEXT so that command functions will be static instead of global. Remove declarations for config_exit and config_help. Define new macros DEFUNSH_ATTR, DEFUNSH_HIDDEN, and DEFUNSH_DEPRECATED so we can have deprecated commands in vtysh. Similarly, for completeness, define macros ALIAS_SH, ALIAS_SH_HIDDEN, and ALIAS_SH_DEPRECATED. Also, fix bug in ALIAS_ATTR macro (didn't matter because it was never used). * command.c: Make many functions static instead of global. (facility_name,facility_match,level_match) New functions to support enhanced destination-specific logging levels. (config_write_host) Support new destination-specific logging levels. (config_logmsg) Added new "logmsg" command to help test logging system. (show_logging) Added "show logging" command to show the current configuration of the logging system. (config_log_stdout_level) Support explicit stdout logging level. (no_config_log_stdout) Now takes optional LEVEL arg. (config_log_monitor,config_log_monitor_level,no_config_log_monitor) New commands creating new "log monitor" commands to set terminal monitoring log level. (config_log_file_level) Support explicit file logging level. (config_log_syslog_level) Support explicit syslog logging level. (config_log_facility,no_config_log_facility) Implement new "log facility" command. (cmd_init) Add hooks for new commands: "show logging", "logmsg", "log stdout <level>", "log monitor", "log monitor <level>", "no log monitor", "log file <filename> <level>", "no log file <filename> <level>", "log syslog <level>", "log facility", and "no log facility". * vty.h: Added a "level" argument to vty_log so it can support "log record-priority". Declare new function vty_log_fixed for use in signal handlers. * vty.c: (vty_log,vty_log_out) Added a "level" argument to support "log record-priority" for vty terminal monitors. (vty_down_level) Use config_exit_cmd.func instead of calling config_exit directly (since command functions will now be static instead of global). (vty_log_fixed) New function to send terminal monitor messages from inside a signal handler.
2004-11-202004-11-19 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* global: Replace strerror with safe_strerror. And vtysh/vtysh.c needs to include "log.h" to pick up the declaration.
2004-11-112004-11-11 Andrew J. Schorr <ajschorr@alumni.princeton.edu>ajs
* vtysh.c: (vtysh_client_execute) Fix flaws in detecting trailing '\0' chars and command return code.
2004-11-02- Add .arch-ids and .arch-inventory to cvsignore, to allow one to use archpaul
with CVS trees.
2004-10-28"show running-daemons" -> "show daemons".hasso
2004-10-20Don't popen pager if command is "exit". Fixes "vtysh screws up my terminalhasso
if I exit" issue.
2004-10-13- fix date in changelog of my last commit..paul