summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Tonokip_Firmware/Tonokip_Firmware.pde158
1 files changed, 79 insertions, 79 deletions
diff --git a/Tonokip_Firmware/Tonokip_Firmware.pde b/Tonokip_Firmware/Tonokip_Firmware.pde
index ed8027a..9121093 100644
--- a/Tonokip_Firmware/Tonokip_Firmware.pde
+++ b/Tonokip_Firmware/Tonokip_Firmware.pde
@@ -1339,94 +1339,94 @@ inline int read_max6675()
inline void manage_heater()
{
- if((millis() - previous_millis_heater) >= HEATER_CHECK_INTERVAL ) {
- previous_millis_heater = millis();
- #ifdef HEATER_USES_THERMISTOR
- current_raw = analogRead(TEMP_0_PIN);
- // When using thermistor, when the heater is colder than targer temp, we get a higher analog reading than target,
- // this switches it up so that the reading appears lower than target for the control logic.
- current_raw = 1023 - current_raw;
- #elif defined HEATER_USES_AD595
- current_raw = analogRead(TEMP_0_PIN);
- #elif defined HEATER_USES_MAX6675
- current_raw = read_max6675();
- #endif
- #ifdef SMOOTHING
- nma = (nma + current_raw) - (nma / SMOOTHFACTOR);
- current_raw = nma / SMOOTHFACTOR;
- #endif
- #ifdef WATCHPERIOD
- if(watchmillis && millis() - watchmillis > WATCHPERIOD){
- if(watch_raw + 1 >= current_raw){
- target_raw = 0;
- digitalWrite(HEATER_0_PIN,LOW);
- digitalWrite(LED_PIN,LOW);
- }else{
- watchmillis = 0;
- }
+ if((millis() - previous_millis_heater) < HEATER_CHECK_INTERVAL )
+ return;
+ previous_millis_heater = millis();
+ #ifdef HEATER_USES_THERMISTOR
+ current_raw = analogRead(TEMP_0_PIN);
+ // When using thermistor, when the heater is colder than targer temp, we get a higher analog reading than target,
+ // this switches it up so that the reading appears lower than target for the control logic.
+ current_raw = 1023 - current_raw;
+ #elif defined HEATER_USES_AD595
+ current_raw = analogRead(TEMP_0_PIN);
+ #elif defined HEATER_USES_MAX6675
+ current_raw = read_max6675();
+ #endif
+ #ifdef SMOOTHING
+ nma = (nma + current_raw) - (nma / SMOOTHFACTOR);
+ current_raw = nma / SMOOTHFACTOR;
+ #endif
+ #ifdef WATCHPERIOD
+ if(watchmillis && millis() - watchmillis > WATCHPERIOD){
+ if(watch_raw + 1 >= current_raw){
+ target_raw = 0;
+ digitalWrite(HEATER_0_PIN,LOW);
+ digitalWrite(LED_PIN,LOW);
+ }else{
+ watchmillis = 0;
+ }
+ }
+ #endif
+ #ifdef MINTEMP
+ if(current_raw <= minttemp)
+ target_raw = 0;
+ #endif
+ #ifdef MAXTEMP
+ if(current_raw >= maxttemp) {
+ target_raw = 0;
+ }
+ #endif
+ #if (TEMP_0_PIN > -1) || defined (HEATER_USES_MAX66675)
+ #ifdef PIDTEMP
+ error = target_raw - current_raw;
+ pTerm = (PID_PGAIN * error) / 100;
+ temp_iState += error;
+ temp_iState = constrain(temp_iState, temp_iState_min, temp_iState_max);
+ iTerm = (PID_IGAIN * temp_iState) / 100;
+ dTerm = (PID_DGAIN * (current_raw - temp_dState)) / 100;
+ temp_dState = current_raw;
+ analogWrite(HEATER_0_PIN, constrain(pTerm + iTerm - dTerm, 0, PID_MAX));
+ #else
+ if(current_raw >= target_raw)
+ {
+ digitalWrite(HEATER_0_PIN,LOW);
+ digitalWrite(LED_PIN,LOW);
}
- #endif
- #ifdef MINTEMP
- if(current_raw <= minttemp)
- target_raw = 0;
- #endif
- #ifdef MAXTEMP
- if(current_raw >= maxttemp) {
- target_raw = 0;
+ else
+ {
+ digitalWrite(HEATER_0_PIN,HIGH);
+ digitalWrite(LED_PIN,HIGH);
}
#endif
- #if (TEMP_0_PIN > -1) || defined (HEATER_USES_MAX66675)
- #ifdef PIDTEMP
- error = target_raw - current_raw;
- pTerm = (PID_PGAIN * error) / 100;
- temp_iState += error;
- temp_iState = constrain(temp_iState, temp_iState_min, temp_iState_max);
- iTerm = (PID_IGAIN * temp_iState) / 100;
- dTerm = (PID_DGAIN * (current_raw - temp_dState)) / 100;
- temp_dState = current_raw;
- analogWrite(HEATER_0_PIN, constrain(pTerm + iTerm - dTerm, 0, PID_MAX));
- #else
- if(current_raw >= target_raw)
- {
- digitalWrite(HEATER_0_PIN,LOW);
- digitalWrite(LED_PIN,LOW);
- }
- else
- {
- digitalWrite(HEATER_0_PIN,HIGH);
- digitalWrite(LED_PIN,HIGH);
- }
- #endif
- #endif
+ #endif
- if(millis() - previous_millis_bed_heater < 5000)
- return;
- previous_millis_bed_heater = millis();
+ if(millis() - previous_millis_bed_heater < 5000)
+ return;
+ previous_millis_bed_heater = millis();
- #ifdef BED_USES_THERMISTOR
+ #ifdef BED_USES_THERMISTOR
- current_bed_raw = analogRead(TEMP_1_PIN);
+ current_bed_raw = analogRead(TEMP_1_PIN);
- // If using thermistor, when the heater is colder than targer temp, we get a higher analog reading than target,
- // this switches it up so that the reading appears lower than target for the control logic.
- current_bed_raw = 1023 - current_bed_raw;
- #elif defined BED_USES_AD595
- current_bed_raw = analogRead(TEMP_1_PIN);
+ // If using thermistor, when the heater is colder than targer temp, we get a higher analog reading than target,
+ // this switches it up so that the reading appears lower than target for the control logic.
+ current_bed_raw = 1023 - current_bed_raw;
+ #elif defined BED_USES_AD595
+ current_bed_raw = analogRead(TEMP_1_PIN);
+
+ #endif
- #endif
-
- #if TEMP_1_PIN > -1
- if(current_bed_raw >= target_bed_raw)
- {
- digitalWrite(HEATER_1_PIN,LOW);
- }
- else
- {
- digitalWrite(HEATER_1_PIN,HIGH);
- }
- #endif
- }
+ #if TEMP_1_PIN > -1
+ if(current_bed_raw >= target_bed_raw)
+ {
+ digitalWrite(HEATER_1_PIN,LOW);
+ }
+ else
+ {
+ digitalWrite(HEATER_1_PIN,HIGH);
+ }
+ #endif
}
// Takes hot end temperature value as input and returns corresponding raw value.