diff options
| -rw-r--r-- | Sprinter/Configuration.h | 1 | ||||
| -rw-r--r-- | Sprinter/Sprinter.pde | 20 | ||||
| -rw-r--r-- | Sprinter/fastio.h | 653 | ||||
| -rw-r--r-- | Sprinter/pins.h | 106 | ||||
| -rw-r--r-- | Sprinter/speed_lookuptable.h | 98 | ||||
| -rw-r--r-- | Sprinter/store_eeprom.cpp | 2 |
6 files changed, 773 insertions, 107 deletions
diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h index a843b25..212b44e 100644 --- a/Sprinter/Configuration.h +++ b/Sprinter/Configuration.h @@ -12,6 +12,7 @@ // Gen 7 @ 16MHZ only= 7 // Gen 7 @ 20MHZ only= 71 // Teensylu (at90usb) = 8 +// Printrboard Rev. B (ATMEGA90USB1286) = 9 // Gen 3 Plus = 21 // gen 3 Monolithic Electronics = 22 // Gen3 PLUS for TechZone Gen3 Remix Motherboard = 23 diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde index d4124aa..706910f 100644 --- a/Sprinter/Sprinter.pde +++ b/Sprinter/Sprinter.pde @@ -88,6 +88,14 @@ - calculate feedrate without extrude before planner block is set - New Board --> GEN7 @ 20 Mhz … - ENDSTOPS_ONLY_FOR_HOMING Option ignore Endstop always --> fault is cleared + + Version 1.3.11T +- fix for broken include in store_eeprom.cpp --> Thanks to kmeehl (issue #145) +- Make fastio & Arduino pin numbering consistent for AT90USB128x. --> Thanks to lincomatic +- Select Speedtable with F_CPU +- Use same Values for Speedtables as Marlin +- + */ @@ -188,7 +196,7 @@ void __cxa_pure_virtual(){}; // M603 - Show Free Ram -#define _VERSION_TEXT "1.3.10T / 14.03.2012" +#define _VERSION_TEXT "1.3.11T / 19.03.2012" //Stepper Movement Variables char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; @@ -2720,8 +2728,8 @@ FORCE_INLINE unsigned short calc_timer(unsigned short step_rate) step_loops = 1; } - if(step_rate < 32) step_rate = 32; - step_rate -= 32; // Correct for minimal speed + if(step_rate < (F_CPU/500000)) step_rate = (F_CPU/500000); + step_rate -= (F_CPU/500000); // Correct for minimal speed if(step_rate >= (8*256)) // higher step rate { // higher step rate @@ -3046,6 +3054,12 @@ void st_init() // output mode = 00 (disconnected) TCCR1A &= ~(3<<COM1A0); TCCR1A &= ~(3<<COM1B0); + + // Set the timer pre-scaler + // Generally we use a divider of 8, resulting in a 2MHz timer + // frequency on a 16MHz MCU. If you are going to change this, be + // sure to regenerate speed_lookuptable.h with + // create_speed_lookuptable.py TCCR1B = (TCCR1B & ~(0x07<<CS10)) | (2<<CS10); // 2MHz timer OCR1A = 0x4000; diff --git a/Sprinter/fastio.h b/Sprinter/fastio.h index 6b5572a..7b15390 100644 --- a/Sprinter/fastio.h +++ b/Sprinter/fastio.h @@ -1904,7 +1904,7 @@ pins #endif -#if defined (__AVR_AT90USB1287__) || defined (__AVR_AT90USB1286__) +#if defined (__AVR_AT90USB646__) // SPI #define SCK DIO9 #define MISO DIO11 @@ -2551,6 +2551,657 @@ pins #define PF7_DDR DDRF #endif +#if defined (__AVR_AT90USB1287__) || defined (__AVR_AT90USB1286__) +// SPI +#define SCK DIO9 +#define MISO DIO11 +#define MOSI DIO10 +#define SS DIO8 + +// change for your board +#define DEBUG_LED DIO31 /* led D5 red */ + +/* +pins +*/ +#define DIO0_PIN PIND0 +#define DIO0_RPORT PIND +#define DIO0_WPORT PORTD +#define DIO0_PWM NULL +#define DIO0_DDR DDRD + +#define DIO1_PIN PIND1 +#define DIO1_RPORT PIND +#define DIO1_WPORT PORTD +#define DIO1_PWM NULL +#define DIO1_DDR DDRD + +#define DIO2_PIN PIND2 +#define DIO2_RPORT PIND +#define DIO2_WPORT PORTD +#define DIO2_PWM NULL +#define DIO2_DDR DDRD + +#define DIO3_PIN PIND3 +#define DIO3_RPORT PIND +#define DIO3_WPORT PORTD +#define DIO3_PWM NULL +#define DIO3_DDR DDRD + +#define DIO4_PIN PIND4 +#define DIO4_RPORT PIND +#define DIO4_WPORT PORTD +#define DIO4_PWM NULL +#define DIO4_DDR DDRD + +#define DIO5_PIN PIND5 +#define DIO5_RPORT PIND +#define DIO5_WPORT PORTD +#define DIO5_PWM NULL +#define DIO5_DDR DDRD + +#define DIO6_PIN PIND6 +#define DIO6_RPORT PIND +#define DIO6_WPORT PORTD +#define DIO6_PWM NULL +#define DIO6_DDR DDRD + +#define DIO7_PIN PIND7 +#define DIO7_RPORT PIND +#define DIO7_WPORT PORTD +#define DIO7_PWM NULL +#define DIO7_DDR DDRD + +#define DIO8_PIN PINE0 +#define DIO8_RPORT PINE +#define DIO8_WPORT PORTE +#define DIO8_PWM NULL +#define DIO8_DDR DDRE + +#define DIO9_PIN PINE1 +#define DIO9_RPORT PINE +#define DIO9_WPORT PORTE +#define DIO9_PWM NULL +#define DIO9_DDR DDRE + +#define DIO10_PIN PINC0 +#define DIO10_RPORT PINC +#define DIO10_WPORT PORTC +#define DIO10_PWM NULL +#define DIO10_DDR DDRC + +#define DIO11_PIN PINC1 +#define DIO11_RPORT PINC +#define DIO11_WPORT PORTC +#define DIO11_PWM NULL +#define DIO11_DDR DDRC + +#define DIO12_PIN PINC2 +#define DIO12_RPORT PINC +#define DIO12_WPORT PORTC +#define DIO12_PWM NULL +#define DIO12_DDR DDRC + +#define DIO13_PIN PINC3 +#define DIO13_RPORT PINC +#define DIO13_WPORT PORTC +#define DIO13_PWM NULL +#define DIO13_DDR DDRC + +#define DIO14_PIN PINC4 +#define DIO14_RPORT PINC +#define DIO14_WPORT PORTC +#define DIO14_PWM NULL +#define DIO14_DDR DDRC + +#define DIO15_PIN PINC5 +#define DIO15_RPORT PINC +#define DIO15_WPORT PORTC +#define DIO15_PWM NULL +#define DIO15_DDR DDRC + +#define DIO16_PIN PINC6 +#define DIO16_RPORT PINC +#define DIO16_WPORT PORTC +#define DIO16_PWM NULL +#define DIO16_DDR DDRC + +#define DIO17_PIN PINC7 +#define DIO17_RPORT PINC +#define DIO17_WPORT PORTC +#define DIO17_PWM NULL +#define DIO17_DDR DDRC + +#define DIO18_PIN PINE6 +#define DIO18_RPORT PINE +#define DIO18_WPORT PORTE +#define DIO18_PWM NULL +#define DIO18_DDR DDRE + +#define DIO19_PIN PINE7 +#define DIO19_RPORT PINE +#define DIO19_WPORT PORTE +#define DIO19_PWM NULL +#define DIO19_DDR DDRE + +#define DIO20_PIN PINB0 +#define DIO20_RPORT PINB +#define DIO20_WPORT PORTB +#define DIO20_PWM NULL +#define DIO20_DDR DDRB + +#define DIO21_PIN PINB1 +#define DIO21_RPORT PINB +#define DIO21_WPORT PORTB +#define DIO21_PWM NULL +#define DIO21_DDR DDRB + +#define DIO22_PIN PINB2 +#define DIO22_RPORT PINB +#define DIO22_WPORT PORTB +#define DIO22_PWM NULL +#define DIO22_DDR DDRB + +#define DIO23_PIN PINB3 +#define DIO23_RPORT PINB +#define DIO23_WPORT PORTB +#define DIO23_PWM NULL +#define DIO23_DDR DDRB + +#define DIO24_PIN PINB4 +#define DIO24_RPORT PINB +#define DIO24_WPORT PORTB +#define DIO24_PWM NULL +#define DIO24_DDR DDRB + +#define DIO25_PIN PINB5 +#define DIO25_RPORT PINB +#define DIO25_WPORT PORTB +#define DIO25_PWM NULL +#define DIO25_DDR DDRB + +#define DIO26_PIN PINB6 +#define DIO26_RPORT PINB +#define DIO26_WPORT PORTB +#define DIO26_PWM NULL +#define DIO26_DDR DDRB + +#define DIO27_PIN PINB7 +#define DIO27_RPORT PINB +#define DIO27_WPORT PORTB +#define DIO27_PWM NULL +#define DIO27_DDR DDRB + +#define DIO28_PIN PINA0 +#define DIO28_RPORT PINA +#define DIO28_WPORT PORTA +#define DIO28_PWM NULL +#define DIO28_DDR DDRA + +#define DIO29_PIN PINA1 +#define DIO29_RPORT PINA +#define DIO29_WPORT PORTA +#define DIO29_PWM NULL +#define DIO29_DDR DDRA + +#define DIO30_PIN PINA2 +#define DIO30_RPORT PINA +#define DIO30_WPORT PORTA +#define DIO30_PWM NULL +#define DIO30_DDR DDRA + +#define DIO31_PIN PINA3 +#define DIO31_RPORT PINA +#define DIO31_WPORT PORTA +#define DIO31_PWM NULL +#define DIO31_DDR DDRA + + +#define DIO32_PIN PINA4 +#define DIO32_RPORT PINA +#define DIO32_WPORT PORTA +#define DIO32_PWM NULL +#define DIO32_DDR DDRA + +#define DIO33_PIN PINA5 +#define DIO33_RPORT PINA +#define DIO33_WPORT PORTA +#define DIO33_PWM NULL +#define DIO33_DDR DDRA + +#define DIO34_PIN PINA6 +#define DIO34_RPORT PINA +#define DIO34_WPORT PORTA +#define DIO34_PWM NULL +#define DIO34_DDR DDRA + +#define DIO35_PIN PINA7 +#define DIO35_RPORT PINA +#define DIO35_WPORT PORTA +#define DIO35_PWM NULL +#define DIO35_DDR DDRA + +#define DIO36_PIN PINE4 +#define DIO36_RPORT PINE +#define DIO36_WPORT PORTE +#define DIO36_PWM NULL +#define DIO36_DDR DDRE + +#define DIO37_PIN PINE5 +#define DIO37_RPORT PINE +#define DIO37_WPORT PORTE +#define DIO37_PWM NULL +#define DIO37_DDR DDRE + +#define DIO38_PIN PINF0 +#define DIO38_RPORT PINF +#define DIO38_WPORT PORTF +#define DIO38_PWM NULL +#define DIO38_DDR DDRF + +#define DIO39_PIN PINF1 +#define DIO39_RPORT PINF +#define DIO39_WPORT PORTF +#define DIO39_PWM NULL +#define DIO39_DDR DDRF + +#define DIO40_PIN PINF2 +#define DIO40_RPORT PINF +#define DIO40_WPORT PORTF +#define DIO40_PWM NULL +#define DIO40_DDR DDRF + +#define DIO41_PIN PINF3 +#define DIO41_RPORT PINF +#define DIO41_WPORT PORTF +#define DIO41_PWM NULL +#define DIO41_DDR DDRF + +#define DIO42_PIN PINF4 +#define DIO42_RPORT PINF +#define DIO42_WPORT PORTF +#define DIO42_PWM NULL +#define DIO42_DDR DDRF + +#define DIO43_PIN PINF5 +#define DIO43_RPORT PINF +#define DIO43_WPORT PORTF +#define DIO43_PWM NULL +#define DIO43_DDR DDRF + +#define DIO44_PIN PINF6 +#define DIO44_RPORT PINF +#define DIO44_WPORT PORTF +#define DIO44_PWM NULL +#define DIO44_DDR DDRF + +#define DIO45_PIN PINF7 +#define DIO45_RPORT PINF +#define DIO45_WPORT PORTF +#define DIO45_PWM NULL +#define DIO45_DDR DDRF + +#define AIO0_PIN PINF0 +#define AIO0_RPORT PINF +#define AIO0_WPORT PORTF +#define AIO0_PWM NULL +#define AIO0_DDR DDRF + +#define AIO1_PIN PINF1 +#define AIO1_RPORT PINF +#define AIO1_WPORT PORTF +#define AIO1_PWM NULL +#define AIO1_DDR DDRF + +#define AIO2_PIN PINF2 +#define AIO2_RPORT PINF +#define AIO2_WPORT PORTF +#define AIO2_PWM NULL +#define AIO2_DDR DDRF + +#define AIO3_PIN PINF3 +#define AIO3_RPORT PINF +#define AIO3_WPORT PORTF +#define AIO3_PWM NULL +#define AIO3_DDR DDRF + +#define AIO4_PIN PINF4 +#define AIO4_RPORT PINF +#define AIO4_WPORT PORTF +#define AIO4_PWM NULL +#define AIO4_DDR DDRF + +#define AIO5_PIN PINF5 +#define AIO5_RPORT PINF +#define AIO5_WPORT PORTF +#define AIO5_PWM NULL +#define AIO5_DDR DDRF + +#define AIO6_PIN PINF6 +#define AIO6_RPORT PINF +#define AIO6_WPORT PORTF +#define AIO6_PWM NULL +#define AIO6_DDR DDRF + +#define AIO7_PIN PINF7 +#define AIO7_RPORT PINF +#define AIO7_WPORT PORTF +#define AIO7_PWM NULL +#define AIO7_DDR DDRF + +//-- Begin not supported by Teensyduino +//-- don't use Arduino functions on these pins pinMode/digitalWrite/etc +#define DIO46_PIN PINE2 +#define DIO46_RPORT PINE +#define DIO46_WPORT PORTE +#define DIO46_PWM NULL +#define DIO46_DDR DDRE + +#define DIO47_PIN PINE3 +#define DIO47_RPORT PINE +#define DIO47_WPORT PORTE +#define DIO47_PWM NULL +#define DIO47_DDR DDRE +//-- end not supported by Teensyduino + + + +#undef PA0 +#define PA0_PIN PINA0 +#define PA0_RPORT PINA +#define PA0_WPORT PORTA +#define PA0_PWM NULL +#define PA0_DDR DDRA +#undef PA1 +#define PA1_PIN PINA1 +#define PA1_RPORT PINA +#define PA1_WPORT PORTA +#define PA1_PWM NULL +#define PA1_DDR DDRA +#undef PA2 +#define PA2_PIN PINA2 +#define PA2_RPORT PINA +#define PA2_WPORT PORTA +#define PA2_PWM NULL +#define PA2_DDR DDRA +#undef PA3 +#define PA3_PIN PINA3 +#define PA3_RPORT PINA +#define PA3_WPORT PORTA +#define PA3_PWM NULL +#define PA3_DDR DDRA +#undef PA4 +#define PA4_PIN PINA4 +#define PA4_RPORT PINA +#define PA4_WPORT PORTA +#define PA4_PWM NULL +#define PA4_DDR DDRA +#undef PA5 +#define PA5_PIN PINA5 +#define PA5_RPORT PINA +#define PA5_WPORT PORTA +#define PA5_PWM NULL +#define PA5_DDR DDRA +#undef PA6 +#define PA6_PIN PINA6 +#define PA6_RPORT PINA +#define PA6_WPORT PORTA +#define PA6_PWM NULL +#define PA6_DDR DDRA +#undef PA7 +#define PA7_PIN PINA7 +#define PA7_RPORT PINA +#define PA7_WPORT PORTA +#define PA7_PWM NULL +#define PA7_DDR DDRA + +#undef PB0 +#define PB0_PIN PINB0 +#define PB0_RPORT PINB +#define PB0_WPORT PORTB +#define PB0_PWM NULL +#define PB0_DDR DDRB +#undef PB1 +#define PB1_PIN PINB1 +#define PB1_RPORT PINB +#define PB1_WPORT PORTB +#define PB1_PWM NULL +#define PB1_DDR DDRB +#undef PB2 +#define PB2_PIN PINB2 +#define PB2_RPORT PINB +#define PB2_WPORT PORTB +#define PB2_PWM NULL +#define PB2_DDR DDRB +#undef PB3 +#define PB3_PIN PINB3 +#define PB3_RPORT PINB +#define PB3_WPORT PORTB +#define PB3_PWM NULL +#define PB3_DDR DDRB +#undef PB4 +#define PB4_PIN PINB4 +#define PB4_RPORT PINB +#define PB4_WPORT PORTB +#define PB4_PWM NULL +#define PB4_DDR DDRB +#undef PB5 +#define PB5_PIN PINB5 +#define PB5_RPORT PINB +#define PB5_WPORT PORTB +#define PB5_PWM NULL +#define PB5_DDR DDRB +#undef PB6 +#define PB6_PIN PINB6 +#define PB6_RPORT PINB +#define PB6_WPORT PORTB +#define PB6_PWM NULL +#define PB6_DDR DDRB +#undef PB7 +#define PB7_PIN PINB7 +#define PB7_RPORT PINB +#define PB7_WPORT PORTB +#define PB7_PWM NULL +#define PB7_DDR DDRB + +#undef PC0 +#define PC0_PIN PINC0 +#define PC0_RPORT PINC +#define PC0_WPORT PORTC +#define PC0_PWM NULL +#define PC0_DDR DDRC +#undef PC1 +#define PC1_PIN PINC1 +#define PC1_RPORT PINC +#define PC1_WPORT PORTC +#define PC1_PWM NULL +#define PC1_DDR DDRC +#undef PC2 +#define PC2_PIN PINC2 +#define PC2_RPORT PINC +#define PC2_WPORT PORTC +#define PC2_PWM NULL +#define PC2_DDR DDRC +#undef PC3 +#define PC3_PIN PINC3 +#define PC3_RPORT PINC +#define PC3_WPORT PORTC +#define PC3_PWM NULL +#define PC3_DDR DDRC +#undef PC4 +#define PC4_PIN PINC4 +#define PC4_RPORT PINC +#define PC4_WPORT PORTC +#define PC4_PWM NULL +#define PC4_DDR DDRC +#undef PC5 +#define PC5_PIN PINC5 +#define PC5_RPORT PINC +#define PC5_WPORT PORTC +#define PC5_PWM NULL +#define PC5_DDR DDRC +#undef PC6 +#define PC6_PIN PINC6 +#define PC6_RPORT PINC +#define PC6_WPORT PORTC +#define PC6_PWM NULL +#define PC6_DDR DDRC +#undef PC7 +#define PC7_PIN PINC7 +#define PC7_RPORT PINC +#define PC7_WPORT PORTC +#define PC7_PWM NULL +#define PC7_DDR DDRC + +#undef PD0 +#define PD0_PIN PIND0 +#define PD0_RPORT PIND +#define PD0_WPORT PORTD +#define PD0_PWM NULL +#define PD0_DDR DDRD +#undef PD1 +#define PD1_PIN PIND1 +#define PD1_RPORT PIND +#define PD1_WPORT PORTD +#define PD1_PWM NULL +#define PD1_DDR DDRD +#undef PD2 +#define PD2_PIN PIND2 +#define PD2_RPORT PIND +#define PD2_WPORT PORTD +#define PD2_PWM NULL +#define PD2_DDR DDRD +#undef PD3 +#define PD3_PIN PIND3 +#define PD3_RPORT PIND +#define PD3_WPORT PORTD +#define PD3_PWM NULL +#define PD3_DDR DDRD +#undef PD4 +#define PD4_PIN PIND4 +#define PD4_RPORT PIND +#define PD4_WPORT PORTD +#define PD4_PWM NULL +#define PD4_DDR DDRD +#undef PD5 +#define PD5_PIN PIND5 +#define PD5_RPORT PIND +#define PD5_WPORT PORTD +#define PD5_PWM NULL +#define PD5_DDR DDRD +#undef PD6 +#define PD6_PIN PIND6 +#define PD6_RPORT PIND +#define PD6_WPORT PORTD +#define PD6_PWM NULL +#define PD6_DDR DDRD +#undef PD7 +#define PD7_PIN PIND7 +#define PD7_RPORT PIND +#define PD7_WPORT PORTD +#define PD7_PWM NULL +#define PD7_DDR DDRD + +#undef PE0 +#define PE0_PIN PINE0 +#define PE0_RPORT PINE +#define PE0_WPORT PORTE +#define PE0_PWM NULL +#define PE0_DDR DDRE +#undef PE1 +#define PE1_PIN PINE1 +#define PE1_RPORT PINE +#define PE1_WPORT PORTE +#define PE1_PWM NULL +#define PE1_DDR DDRE +#undef PE2 +#define PE2_PIN PINE2 +#define PE2_RPORT PINE +#define PE2_WPORT PORTE +#define PE2_PWM NULL +#define PE2_DDR DDRE +#undef PE3 +#define PE3_PIN PINE3 +#define PE3_RPORT PINE +#define PE3_WPORT PORTE +#define PE3_PWM NULL +#define PE3_DDR DDRE +#undef PE4 +#define PE4_PIN PINE4 +#define PE4_RPORT PINE +#define PE4_WPORT PORTE +#define PE4_PWM NULL +#define PE4_DDR DDRE +#undef PE5 +#define PE5_PIN PINE5 +#define PE5_RPORT PINE +#define PE5_WPORT PORTE +#define PE5_PWM NULL +#define PE5_DDR DDRE +#undef PE6 +#define PE6_PIN PINE6 +#define PE6_RPORT PINE +#define PE6_WPORT PORTE +#define PE6_PWM NULL +#define PE6_DDR DDRE +#undef PE7 +#define PE7_PIN PINE7 +#define PE7_RPORT PINE +#define PE7_WPORT PORTE +#define PE7_PWM NULL +#define PE7_DDR DDRE + +#undef PF0 +#define PF0_PIN PINF0 +#define PF0_RPORT PINF +#define PF0_WPORT PORTF +#define PF0_PWM NULL +#define PF0_DDR DDRF +#undef PF1 +#define PF1_PIN PINF1 +#define PF1_RPORT PINF +#define PF1_WPORT PORTF +#define PF1_PWM NULL +#define PF1_DDR DDRF +#undef PF2 +#define PF2_PIN PINF2 +#define PF2_RPORT PINF +#define PF2_WPORT PORTF +#define PF2_PWM NULL +#define PF2_DDR DDRF +#undef PF3 +#define PF3_PIN PINF3 +#define PF3_RPORT PINF +#define PF3_WPORT PORTF +#define PF3_PWM NULL +#define PF3_DDR DDRF +#undef PF4 +#define PF4_PIN PINF4 +#define PF4_RPORT PINF +#define PF4_WPORT PORTF +#define PF4_PWM NULL +#define PF4_DDR DDRF +#undef PF5 +#define PF5_PIN PINF5 +#define PF5_RPORT PINF +#define PF5_WPORT PORTF +#define PF5_PWM NULL +#define PF5_DDR DDRF +#undef PF6 +#define PF6_PIN PINF6 +#define PF6_RPORT PINF +#define PF6_WPORT PORTF +#define PF6_PWM NULL +#define PF6_DDR DDRF +#undef PF7 +#define PF7_PIN PINF7 +#define PF7_RPORT PINF +#define PF7_WPORT PORTF +#define PF7_PWM NULL +#define PF7_DDR DDRF +#endif + + #ifndef DIO0_PIN #error pins for this chip not defined in arduino.h! If you write an appropriate pin definition and have this firmware work on your chip, please submit a pull request #endif diff --git a/Sprinter/pins.h b/Sprinter/pins.h index 315c28e..e35e6a8 100644 --- a/Sprinter/pins.h +++ b/Sprinter/pins.h @@ -751,39 +751,39 @@ #define KNOWN_BOARD 1 -#define X_STEP_PIN 0 -#define X_DIR_PIN 1 -#define X_ENABLE_PIN 39 -#define X_MIN_PIN 13 +#define X_STEP_PIN 28 +#define X_DIR_PIN 29 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 25 #define X_MAX_PIN -1 -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 14 +#define Y_STEP_PIN 30 +#define Y_DIR_PIN 31 +#define Y_ENABLE_PIN 26 +#define Y_MIN_PIN 20 #define Y_MAX_PIN -1 -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 5 -#define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 15 +#define Z_STEP_PIN 32 +#define Z_DIR_PIN 33 +#define Z_ENABLE_PIN 17 +#define Z_MIN_PIN 27 #define Z_MAX_PIN -1 -#define E_STEP_PIN 6 -#define E_DIR_PIN 7 -#define E_ENABLE_PIN 19 +#define E_STEP_PIN 34 +#define E_DIR_PIN 35 +#define E_ENABLE_PIN 13 -#define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN 20 // Bed -#define FAN_PIN 22 // Fan +#define HEATER_0_PIN 15 // Extruder +#define HEATER_1_PIN 14 // Bed +#define FAN_PIN 16 // Fan #define TEMP_0_PIN 7 // Extruder #define TEMP_1_PIN 6 // Bed #define SDPOWER -1 -#define SDSS 8 +#define SDSS 20 #define LED_PIN -1 #define PS_ON_PIN -1 #define KILL_PIN -1 @@ -791,9 +791,9 @@ #ifndef SDSUPPORT // these pins are defined in the SD library if building with SD support - #define SCK_PIN 9 - #define MISO_PIN 11 - #define MOSI_PIN 10 + #define SCK_PIN 21 + #define MISO_PIN 22 + #define MOSI_PIN 23 #endif #endif @@ -808,48 +808,48 @@ #define KNOWN_BOARD 1 -#define X_STEP_PIN 0 -#define X_DIR_PIN 1 -#define X_ENABLE_PIN 39 -#define X_MIN_PIN 35 -#define X_MAX_PIN -1 +#define X_STEP_PIN 28 +#define X_DIR_PIN 29 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 47 +#define X_MAX_PIN -1 -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 8 -#define Y_MAX_PIN -1 +#define Y_STEP_PIN 30 +#define Y_DIR_PIN 31 +#define Y_ENABLE_PIN 18 +#define Y_MIN_PIN 20 +#define Y_MAX_PIN -1 -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 5 -#define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 36 -#define Z_MAX_PIN -1 +#define Z_STEP_PIN 32 +#define Z_DIR_PIN 33 +#define Z_ENABLE_PIN 17 +#define Z_MIN_PIN 36 +#define Z_MAX_PIN -1 -#define E_STEP_PIN 6 -#define E_DIR_PIN 7 -#define E_ENABLE_PIN 19 +#define E_STEP_PIN 34 +#define E_DIR_PIN 35 +#define E_ENABLE_PIN 13 -#define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN 20 // Bed -#define FAN_PIN 22 // Fan +#define HEATER_0_PIN 15 // Extruder +#define HEATER_1_PIN 14 // Bed +#define FAN_PIN 16 // Fan -#define TEMP_0_PIN 1 // Extruder -#define TEMP_1_PIN 0 // Bed +#define TEMP_0_PIN 1 // Extruder +#define TEMP_1_PIN 0 // Bed -#define SDPOWER -1 -#define SDSS 26 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 +#define SDPOWER -1 +#define SDSS 2 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 #ifndef SDSUPPORT // these pins are defined in the SD library if building with SD support -#define SCK_PIN 9 -#define MISO_PIN 11 -#define MOSI_PIN 10 + #define SCK_PIN 21 + #define MISO_PIN 22 + #define MOSI_PIN 23 #endif #endif diff --git a/Sprinter/speed_lookuptable.h b/Sprinter/speed_lookuptable.h index 6cc6a28..1b957b4 100644 --- a/Sprinter/speed_lookuptable.h +++ b/Sprinter/speed_lookuptable.h @@ -4,8 +4,8 @@ #include <avr/pgmspace.h> - #ifndef QUARZ_20MHZ - uint16_t speed_lookuptable_fast[256][2] PROGMEM = { + #if F_CPU == 16000000 + const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {\ { 62500, 55556}, { 6944, 3268}, { 3676, 1176}, { 2500, 607}, { 1893, 369}, { 1524, 249}, { 1275, 179}, { 1096, 135}, { 961, 105}, { 856, 85}, { 771, 69}, { 702, 58}, { 644, 49}, { 595, 42}, { 553, 37}, { 516, 32}, { 484, 28}, { 456, 25}, { 431, 23}, { 408, 20}, { 388, 19}, { 369, 16}, { 353, 16}, { 337, 14}, @@ -37,10 +37,10 @@ { 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 0}, { 34, 1}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 0}, { 33, 1}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 0}, { 32, 1}, { 31, 0}, { 31, 0}, { 31, 0}, - { 31, 0}, { 31, 0}, { 31, 0}, { 31, 1}, { 30, 0}, { 30, 0}, { 30, 0}, { 30, 0}, + { 31, 0}, { 31, 0}, { 31, 0}, { 31, 1}, { 30, 0}, { 30, 0}, { 30, 0}, { 30, 0} }; - uint16_t speed_lookuptable_slow[256][2] PROGMEM = { + const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {\ { 62500, 12500}, { 50000, 8334}, { 41666, 5952}, { 35714, 4464}, { 31250, 3473}, { 27777, 2777}, { 25000, 2273}, { 22727, 1894}, { 20833, 1603}, { 19230, 1373}, { 17857, 1191}, { 16666, 1041}, { 15625, 920}, { 14705, 817}, { 13888, 731}, { 13157, 657}, { 12500, 596}, { 11904, 541}, { 11363, 494}, { 10869, 453}, { 10416, 416}, { 10000, 385}, { 9615, 356}, { 9259, 331}, @@ -72,26 +72,26 @@ { 1096, 5}, { 1091, 5}, { 1086, 4}, { 1082, 5}, { 1077, 5}, { 1072, 4}, { 1068, 5}, { 1063, 4}, { 1059, 5}, { 1054, 4}, { 1050, 4}, { 1046, 5}, { 1041, 4}, { 1037, 4}, { 1033, 5}, { 1028, 4}, { 1024, 4}, { 1020, 4}, { 1016, 4}, { 1012, 4}, { 1008, 4}, { 1004, 4}, { 1000, 4}, { 996, 4}, - { 992, 4}, { 988, 4}, { 984, 4}, { 980, 4}, { 976, 4}, { 972, 4}, { 968, 3}, { 965, 3}, + { 992, 4}, { 988, 4}, { 984, 4}, { 980, 4}, { 976, 4}, { 972, 4}, { 968, 3}, { 965, 3} }; #else const uint16_t speed_lookuptable_fast[256][2] PROGMEM = { - {65234, 57986}, {8680, 4085}, {4595, 1470}, {3125, 758}, {2367, 462}, {1905, 311}, {1594, 224}, {1370, 169}, - {1201, 131}, {1070, 106}, {964, 87}, {877, 72}, {805, 61}, {744, 53}, {691, 46}, {645, 40}, - {605, 35}, {570, 32}, {538, 28}, {510, 25}, {485, 23}, {462, 21}, {441, 19}, {422, 18}, - {404, 16}, {388, 15}, {373, 13}, {360, 13}, {347, 12}, {335, 11}, {324, 11}, {313, 10}, - {303, 9}, {294, 8}, {286, 8}, {278, 8}, {270, 7}, {263, 7}, {256, 7}, {249, 6}, + {62500, 54055}, {8445, 3917}, {4528, 1434}, {3094, 745}, {2349, 456}, {1893, 307}, {1586, 222}, {1364, 167}, + {1197, 131}, {1066, 105}, {961, 86}, {875, 72}, {803, 61}, {742, 53}, {689, 45}, {644, 40}, + {604, 35}, {569, 32}, {537, 28}, {509, 25}, {484, 23}, {461, 21}, {440, 19}, {421, 17}, + {404, 16}, {388, 15}, {373, 14}, {359, 13}, {346, 12}, {334, 11}, {323, 10}, {313, 10}, + {303, 9}, {294, 9}, {285, 8}, {277, 7}, {270, 8}, {262, 7}, {255, 6}, {249, 6}, {243, 6}, {237, 6}, {231, 5}, {226, 5}, {221, 5}, {216, 5}, {211, 4}, {207, 5}, - {202, 4}, {198, 4}, {194, 3}, {191, 4}, {187, 4}, {183, 3}, {180, 3}, {177, 4}, - {173, 3}, {170, 2}, {168, 3}, {165, 3}, {162, 3}, {159, 2}, {157, 3}, {154, 2}, + {202, 4}, {198, 4}, {194, 4}, {190, 3}, {187, 4}, {183, 3}, {180, 3}, {177, 4}, + {173, 3}, {170, 3}, {167, 2}, {165, 3}, {162, 3}, {159, 2}, {157, 3}, {154, 2}, {152, 3}, {149, 2}, {147, 2}, {145, 2}, {143, 2}, {141, 2}, {139, 2}, {137, 2}, - {135, 2}, {133, 2}, {131, 2}, {129, 1}, {128, 2}, {126, 1}, {125, 2}, {123, 2}, + {135, 2}, {133, 2}, {131, 2}, {129, 1}, {128, 2}, {126, 2}, {124, 1}, {123, 2}, {121, 1}, {120, 2}, {118, 1}, {117, 1}, {116, 2}, {114, 1}, {113, 1}, {112, 2}, - {110, 1}, {109, 1}, {108, 1}, {107, 1}, {106, 2}, {104, 1}, {103, 1}, {102, 1}, + {110, 1}, {109, 1}, {108, 1}, {107, 2}, {105, 1}, {104, 1}, {103, 1}, {102, 1}, {101, 1}, {100, 1}, {99, 1}, {98, 1}, {97, 1}, {96, 1}, {95, 1}, {94, 1}, - {93, 1}, {92, 0}, {92, 1}, {91, 1}, {90, 1}, {89, 1}, {88, 1}, {87, 0}, + {93, 1}, {92, 1}, {91, 0}, {91, 1}, {90, 1}, {89, 1}, {88, 1}, {87, 0}, {87, 1}, {86, 1}, {85, 1}, {84, 0}, {84, 1}, {83, 1}, {82, 1}, {81, 0}, {81, 1}, {80, 1}, {79, 0}, {79, 1}, {78, 0}, {78, 1}, {77, 1}, {76, 0}, {76, 1}, {75, 0}, {75, 1}, {74, 1}, {73, 0}, {73, 1}, {72, 0}, {72, 1}, @@ -108,43 +108,43 @@ {45, 1}, {44, 0}, {44, 0}, {44, 0}, {44, 0}, {44, 1}, {43, 0}, {43, 0}, {43, 0}, {43, 0}, {43, 1}, {42, 0}, {42, 0}, {42, 0}, {42, 0}, {42, 0}, {42, 1}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 0}, {41, 1}, {40, 0}, - {40, 0}, {40, 0}, {40, 0}, {40, 0}, {40, 1}, {39, 0}, {39, 0}, {39, 0}, + {40, 0}, {40, 0}, {40, 0}, {40, 1}, {39, 0}, {39, 0}, {39, 0}, {39, 0}, {39, 0}, {39, 0}, {39, 1}, {38, 0}, {38, 0}, {38, 0}, {38, 0}, {38, 0}, - }; +}; const uint16_t speed_lookuptable_slow[256][2] PROGMEM = { - {65234, 13046}, {62500, 10417}, {52083, 7441}, {44642, 5580}, {39062, 4340}, {34722, 3472}, {31250, 2841}, {28409, 2368}, - {26041, 2003}, {24038, 1717}, {22321, 1488}, {20833, 1302}, {19531, 1149}, {18382, 1021}, {17361, 914}, {16447, 822}, - {15625, 745}, {14880, 676}, {14204, 618}, {13586, 566}, {13020, 520}, {12500, 481}, {12019, 445}, {11574, 414}, - {11160, 385}, {10775, 359}, {10416, 336}, {10080, 315}, {9765, 296}, {9469, 278}, {9191, 263}, {8928, 248}, - {8680, 235}, {8445, 222}, {8223, 211}, {8012, 200}, {7812, 191}, {7621, 181}, {7440, 173}, {7267, 165}, - {7102, 158}, {6944, 151}, {6793, 145}, {6648, 138}, {6510, 133}, {6377, 127}, {6250, 123}, {6127, 118}, - {6009, 113}, {5896, 109}, {5787, 106}, {5681, 101}, {5580, 98}, {5482, 95}, {5387, 91}, {5296, 88}, - {5208, 86}, {5122, 82}, {5040, 80}, {4960, 78}, {4882, 75}, {4807, 73}, {4734, 70}, {4664, 69}, - {4595, 67}, {4528, 64}, {4464, 63}, {4401, 61}, {4340, 60}, {4280, 58}, {4222, 56}, {4166, 55}, - {4111, 53}, {4058, 52}, {4006, 51}, {3955, 49}, {3906, 48}, {3858, 48}, {3810, 45}, {3765, 45}, - {3720, 44}, {3676, 43}, {3633, 42}, {3591, 40}, {3551, 40}, {3511, 39}, {3472, 38}, {3434, 38}, - {3396, 36}, {3360, 36}, {3324, 35}, {3289, 34}, {3255, 34}, {3221, 33}, {3188, 32}, {3156, 31}, - {3125, 31}, {3094, 31}, {3063, 30}, {3033, 29}, {3004, 28}, {2976, 28}, {2948, 28}, {2920, 27}, - {2893, 27}, {2866, 26}, {2840, 25}, {2815, 25}, {2790, 25}, {2765, 24}, {2741, 24}, {2717, 24}, - {2693, 23}, {2670, 22}, {2648, 22}, {2626, 22}, {2604, 22}, {2582, 21}, {2561, 21}, {2540, 20}, - {2520, 20}, {2500, 20}, {2480, 20}, {2460, 19}, {2441, 19}, {2422, 19}, {2403, 18}, {2385, 18}, - {2367, 18}, {2349, 17}, {2332, 18}, {2314, 17}, {2297, 16}, {2281, 17}, {2264, 16}, {2248, 16}, - {2232, 16}, {2216, 16}, {2200, 15}, {2185, 15}, {2170, 15}, {2155, 15}, {2140, 15}, {2125, 14}, - {2111, 14}, {2097, 14}, {2083, 14}, {2069, 14}, {2055, 13}, {2042, 13}, {2029, 13}, {2016, 13}, - {2003, 13}, {1990, 13}, {1977, 12}, {1965, 12}, {1953, 13}, {1940, 11}, {1929, 12}, {1917, 12}, - {1905, 12}, {1893, 11}, {1882, 11}, {1871, 11}, {1860, 11}, {1849, 11}, {1838, 11}, {1827, 11}, - {1816, 10}, {1806, 11}, {1795, 10}, {1785, 10}, {1775, 10}, {1765, 10}, {1755, 10}, {1745, 9}, - {1736, 10}, {1726, 9}, {1717, 10}, {1707, 9}, {1698, 9}, {1689, 9}, {1680, 9}, {1671, 9}, - {1662, 9}, {1653, 9}, {1644, 8}, {1636, 9}, {1627, 8}, {1619, 9}, {1610, 8}, {1602, 8}, - {1594, 8}, {1586, 8}, {1578, 8}, {1570, 8}, {1562, 8}, {1554, 7}, {1547, 8}, {1539, 8}, - {1531, 7}, {1524, 8}, {1516, 7}, {1509, 7}, {1502, 7}, {1495, 7}, {1488, 7}, {1481, 7}, - {1474, 7}, {1467, 7}, {1460, 7}, {1453, 7}, {1446, 6}, {1440, 7}, {1433, 7}, {1426, 6}, - {1420, 6}, {1414, 7}, {1407, 6}, {1401, 6}, {1395, 7}, {1388, 6}, {1382, 6}, {1376, 6}, - {1370, 6}, {1364, 6}, {1358, 6}, {1352, 6}, {1346, 5}, {1341, 6}, {1335, 6}, {1329, 5}, - {1324, 6}, {1318, 5}, {1313, 6}, {1307, 5}, {1302, 6}, {1296, 5}, {1291, 5}, {1286, 6}, - {1280, 5}, {1275, 5}, {1270, 5}, {1265, 5}, {1260, 5}, {1255, 5}, {1250, 5}, {1245, 5}, - {1240, 5}, {1235, 5}, {1230, 5}, {1225, 5}, {1220, 5}, {1215, 4}, {1211, 5}, {1206, 5}, + {62500, 10417}, {52083, 7441}, {44642, 5580}, {39062, 4340}, {34722, 3472}, {31250, 2841}, {28409, 2368}, {26041, 2003}, + {24038, 1717}, {22321, 1488}, {20833, 1302}, {19531, 1149}, {18382, 1021}, {17361, 914}, {16447, 822}, {15625, 745}, + {14880, 676}, {14204, 618}, {13586, 566}, {13020, 520}, {12500, 481}, {12019, 445}, {11574, 414}, {11160, 385}, + {10775, 359}, {10416, 336}, {10080, 315}, {9765, 296}, {9469, 278}, {9191, 263}, {8928, 248}, {8680, 235}, + {8445, 222}, {8223, 211}, {8012, 200}, {7812, 191}, {7621, 181}, {7440, 173}, {7267, 165}, {7102, 158}, + {6944, 151}, {6793, 145}, {6648, 138}, {6510, 133}, {6377, 127}, {6250, 123}, {6127, 118}, {6009, 113}, + {5896, 109}, {5787, 106}, {5681, 101}, {5580, 98}, {5482, 95}, {5387, 91}, {5296, 88}, {5208, 86}, + {5122, 82}, {5040, 80}, {4960, 78}, {4882, 75}, {4807, 73}, {4734, 70}, {4664, 69}, {4595, 67}, + {4528, 64}, {4464, 63}, {4401, 61}, {4340, 60}, {4280, 58}, {4222, 56}, {4166, 55}, {4111, 53}, + {4058, 52}, {4006, 51}, {3955, 49}, {3906, 48}, {3858, 48}, {3810, 45}, {3765, 45}, {3720, 44}, + {3676, 43}, {3633, 42}, {3591, 40}, {3551, 40}, {3511, 39}, {3472, 38}, {3434, 38}, {3396, 36}, + {3360, 36}, {3324, 35}, {3289, 34}, {3255, 34}, {3221, 33}, {3188, 32}, {3156, 31}, {3125, 31}, + {3094, 31}, {3063, 30}, {3033, 29}, {3004, 28}, {2976, 28}, {2948, 28}, {2920, 27}, {2893, 27}, + {2866, 26}, {2840, 25}, {2815, 25}, {2790, 25}, {2765, 24}, {2741, 24}, {2717, 24}, {2693, 23}, + {2670, 22}, {2648, 22}, {2626, 22}, {2604, 22}, {2582, 21}, {2561, 21}, {2540, 20}, {2520, 20}, + {2500, 20}, {2480, 20}, {2460, 19}, {2441, 19}, {2422, 19}, {2403, 18}, {2385, 18}, {2367, 18}, + {2349, 17}, {2332, 18}, {2314, 17}, {2297, 16}, {2281, 17}, {2264, 16}, {2248, 16}, {2232, 16}, + {2216, 16}, {2200, 15}, {2185, 15}, {2170, 15}, {2155, 15}, {2140, 15}, {2125, 14}, {2111, 14}, + {2097, 14}, {2083, 14}, {2069, 14}, {2055, 13}, {2042, 13}, {2029, 13}, {2016, 13}, {2003, 13}, + {1990, 13}, {1977, 12}, {1965, 12}, {1953, 13}, {1940, 11}, {1929, 12}, {1917, 12}, {1905, 12}, + {1893, 11}, {1882, 11}, {1871, 11}, {1860, 11}, {1849, 11}, {1838, 11}, {1827, 11}, {1816, 10}, + {1806, 11}, {1795, 10}, {1785, 10}, {1775, 10}, {1765, 10}, {1755, 10}, {1745, 9}, {1736, 10}, + {1726, 9}, {1717, 10}, {1707, 9}, {1698, 9}, {1689, 9}, {1680, 9}, {1671, 9}, {1662, 9}, + {1653, 9}, {1644, 8}, {1636, 9}, {1627, 8}, {1619, 9}, {1610, 8}, {1602, 8}, {1594, 8}, + {1586, 8}, {1578, 8}, {1570, 8}, {1562, 8}, {1554, 7}, {1547, 8}, {1539, 8}, {1531, 7}, + {1524, 8}, {1516, 7}, {1509, 7}, {1502, 7}, {1495, 7}, {1488, 7}, {1481, 7}, {1474, 7}, + {1467, 7}, {1460, 7}, {1453, 7}, {1446, 6}, {1440, 7}, {1433, 7}, {1426, 6}, {1420, 6}, + {1414, 7}, {1407, 6}, {1401, 6}, {1395, 7}, {1388, 6}, {1382, 6}, {1376, 6}, {1370, 6}, + {1364, 6}, {1358, 6}, {1352, 6}, {1346, 5}, {1341, 6}, {1335, 6}, {1329, 5}, {1324, 6}, + {1318, 5}, {1313, 6}, {1307, 5}, {1302, 6}, {1296, 5}, {1291, 5}, {1286, 6}, {1280, 5}, + {1275, 5}, {1270, 5}, {1265, 5}, {1260, 5}, {1255, 5}, {1250, 5}, {1245, 5}, {1240, 5}, + {1235, 5}, {1230, 5}, {1225, 5}, {1220, 5}, {1215, 4}, {1211, 5}, {1206, 5}, {1201, 5}, }; #endif diff --git a/Sprinter/store_eeprom.cpp b/Sprinter/store_eeprom.cpp index 9c5ae1f..c2cd353 100644 --- a/Sprinter/store_eeprom.cpp +++ b/Sprinter/store_eeprom.cpp @@ -19,7 +19,7 @@ #include <avr/pgmspace.h> #include <inttypes.h> -#include "sprinter.h" +#include "Sprinter.h" #include "store_eeprom.h" #include "Configuration.h" |