diff options
Diffstat (limited to 'Sprinter/Sprinter.pde')
| -rw-r--r-- | Sprinter/Sprinter.pde | 50 |
1 files changed, 47 insertions, 3 deletions
diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde index 1dac69b..dfe12d1 100644 --- a/Sprinter/Sprinter.pde +++ b/Sprinter/Sprinter.pde @@ -59,6 +59,13 @@ - Corrected distance calculation. (thanks jv4779) - MAX Feed Rate for Z-Axis reduced to 2 mm/s some Printers had problems with 4 mm/s + Version 1.3.06T + - the microcontroller can store settings in the EEPROM + - M500 - stores paramters in EEPROM + - M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). + - M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. + - M503 - Print settings + */ @@ -70,15 +77,19 @@ #include "pins.h" #include "Sprinter.h" #include "speed_lookuptable.h" +#include "heater.h" + #ifdef USE_ARC_FUNCTION #include "arc_func.h" #endif -#include "heater.h" #ifdef SDSUPPORT -#include "SdFat.h" + #include "SdFat.h" #endif +#ifdef USE_EEPROM_SETTINGS + #include "store_eeprom.h" +#endif #ifndef CRITICAL_SECTION_START #define CRITICAL_SECTION_START unsigned char _sreg = SREG; cli() @@ -143,13 +154,18 @@ void __cxa_pure_virtual(){}; // M220 - set speed factor override percentage S:factor in percent +// M500 - stores paramters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// M503 - Print settings + // Debug feature / Testing the PID for Hotend // M601 - Show Temp jitter from Extruder (min / max value from Hotend Temperatur while printing) // M602 - Reset Temp jitter from Extruder (min / max val) --> Dont use it while Printing // M603 - Show Free Ram -#define _VERSION_TEXT "1.3.05T / 15.02.2012" +#define _VERSION_TEXT "1.3.06T / 17.02.2012" //Stepper Movement Variables char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'}; @@ -709,6 +725,12 @@ void setup() showString(PSTR("Stepper Timer init\r\n")); st_init(); // Initialize stepper + #ifdef USE_EEPROM_SETTINGS + //first Value --> Init with default + //second value --> Print settings to UART + EEPROM_RetrieveSettings(false,false); + #endif + //Free Ram showString(PSTR("Free Ram: ")); Serial.println(FreeRam1()); @@ -1579,6 +1601,28 @@ FORCE_INLINE void process_commands() } } break; +#ifdef USE_EEPROM_SETTINGS + case 500: // Store settings in EEPROM + { + EEPROM_StoreSettings(); + } + break; + case 501: // Read settings from EEPROM + { + EEPROM_RetrieveSettings(false,true); + } + break; + case 502: // Revert to default settings + { + EEPROM_RetrieveSettings(true,true); + } + break; + case 503: // print settings currently in memory + { + EEPROM_printSettings(); + } + break; +#endif #ifdef DEBUG_HEATER_TEMP case 601: // M601 show Extruder Temp jitter #if (TEMP_0_PIN > -1) || defined (HEATER_USES_MAX6675)|| defined HEATER_USES_AD595 |