diff options
Diffstat (limited to 'Sprinter/pins.h')
| -rw-r--r-- | Sprinter/pins.h | 106 |
1 files changed, 53 insertions, 53 deletions
diff --git a/Sprinter/pins.h b/Sprinter/pins.h index 315c28e..e35e6a8 100644 --- a/Sprinter/pins.h +++ b/Sprinter/pins.h @@ -751,39 +751,39 @@ #define KNOWN_BOARD 1 -#define X_STEP_PIN 0 -#define X_DIR_PIN 1 -#define X_ENABLE_PIN 39 -#define X_MIN_PIN 13 +#define X_STEP_PIN 28 +#define X_DIR_PIN 29 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 25 #define X_MAX_PIN -1 -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 14 +#define Y_STEP_PIN 30 +#define Y_DIR_PIN 31 +#define Y_ENABLE_PIN 26 +#define Y_MIN_PIN 20 #define Y_MAX_PIN -1 -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 5 -#define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 15 +#define Z_STEP_PIN 32 +#define Z_DIR_PIN 33 +#define Z_ENABLE_PIN 17 +#define Z_MIN_PIN 27 #define Z_MAX_PIN -1 -#define E_STEP_PIN 6 -#define E_DIR_PIN 7 -#define E_ENABLE_PIN 19 +#define E_STEP_PIN 34 +#define E_DIR_PIN 35 +#define E_ENABLE_PIN 13 -#define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN 20 // Bed -#define FAN_PIN 22 // Fan +#define HEATER_0_PIN 15 // Extruder +#define HEATER_1_PIN 14 // Bed +#define FAN_PIN 16 // Fan #define TEMP_0_PIN 7 // Extruder #define TEMP_1_PIN 6 // Bed #define SDPOWER -1 -#define SDSS 8 +#define SDSS 20 #define LED_PIN -1 #define PS_ON_PIN -1 #define KILL_PIN -1 @@ -791,9 +791,9 @@ #ifndef SDSUPPORT // these pins are defined in the SD library if building with SD support - #define SCK_PIN 9 - #define MISO_PIN 11 - #define MOSI_PIN 10 + #define SCK_PIN 21 + #define MISO_PIN 22 + #define MOSI_PIN 23 #endif #endif @@ -808,48 +808,48 @@ #define KNOWN_BOARD 1 -#define X_STEP_PIN 0 -#define X_DIR_PIN 1 -#define X_ENABLE_PIN 39 -#define X_MIN_PIN 35 -#define X_MAX_PIN -1 +#define X_STEP_PIN 28 +#define X_DIR_PIN 29 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 47 +#define X_MAX_PIN -1 -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 38 -#define Y_MIN_PIN 8 -#define Y_MAX_PIN -1 +#define Y_STEP_PIN 30 +#define Y_DIR_PIN 31 +#define Y_ENABLE_PIN 18 +#define Y_MIN_PIN 20 +#define Y_MAX_PIN -1 -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 5 -#define Z_ENABLE_PIN 23 -#define Z_MIN_PIN 36 -#define Z_MAX_PIN -1 +#define Z_STEP_PIN 32 +#define Z_DIR_PIN 33 +#define Z_ENABLE_PIN 17 +#define Z_MIN_PIN 36 +#define Z_MAX_PIN -1 -#define E_STEP_PIN 6 -#define E_DIR_PIN 7 -#define E_ENABLE_PIN 19 +#define E_STEP_PIN 34 +#define E_DIR_PIN 35 +#define E_ENABLE_PIN 13 -#define HEATER_0_PIN 21 // Extruder -#define HEATER_1_PIN 20 // Bed -#define FAN_PIN 22 // Fan +#define HEATER_0_PIN 15 // Extruder +#define HEATER_1_PIN 14 // Bed +#define FAN_PIN 16 // Fan -#define TEMP_0_PIN 1 // Extruder -#define TEMP_1_PIN 0 // Bed +#define TEMP_0_PIN 1 // Extruder +#define TEMP_1_PIN 0 // Bed -#define SDPOWER -1 -#define SDSS 26 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 +#define SDPOWER -1 +#define SDSS 2 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 #ifndef SDSUPPORT // these pins are defined in the SD library if building with SD support -#define SCK_PIN 9 -#define MISO_PIN 11 -#define MOSI_PIN 10 + #define SCK_PIN 21 + #define MISO_PIN 22 + #define MOSI_PIN 23 #endif #endif |