summaryrefslogtreecommitdiff
path: root/Sprinter/pins.h
diff options
context:
space:
mode:
Diffstat (limited to 'Sprinter/pins.h')
-rw-r--r--Sprinter/pins.h106
1 files changed, 53 insertions, 53 deletions
diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index 315c28e..e35e6a8 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -751,39 +751,39 @@
#define KNOWN_BOARD 1
-#define X_STEP_PIN 0
-#define X_DIR_PIN 1
-#define X_ENABLE_PIN 39
-#define X_MIN_PIN 13
+#define X_STEP_PIN 28
+#define X_DIR_PIN 29
+#define X_ENABLE_PIN 19
+#define X_MIN_PIN 25
#define X_MAX_PIN -1
-#define Y_STEP_PIN 2
-#define Y_DIR_PIN 3
-#define Y_ENABLE_PIN 38
-#define Y_MIN_PIN 14
+#define Y_STEP_PIN 30
+#define Y_DIR_PIN 31
+#define Y_ENABLE_PIN 26
+#define Y_MIN_PIN 20
#define Y_MAX_PIN -1
-#define Z_STEP_PIN 4
-#define Z_DIR_PIN 5
-#define Z_ENABLE_PIN 23
-#define Z_MIN_PIN 15
+#define Z_STEP_PIN 32
+#define Z_DIR_PIN 33
+#define Z_ENABLE_PIN 17
+#define Z_MIN_PIN 27
#define Z_MAX_PIN -1
-#define E_STEP_PIN 6
-#define E_DIR_PIN 7
-#define E_ENABLE_PIN 19
+#define E_STEP_PIN 34
+#define E_DIR_PIN 35
+#define E_ENABLE_PIN 13
-#define HEATER_0_PIN 21 // Extruder
-#define HEATER_1_PIN 20 // Bed
-#define FAN_PIN 22 // Fan
+#define HEATER_0_PIN 15 // Extruder
+#define HEATER_1_PIN 14 // Bed
+#define FAN_PIN 16 // Fan
#define TEMP_0_PIN 7 // Extruder
#define TEMP_1_PIN 6 // Bed
#define SDPOWER -1
-#define SDSS 8
+#define SDSS 20
#define LED_PIN -1
#define PS_ON_PIN -1
#define KILL_PIN -1
@@ -791,9 +791,9 @@
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
- #define SCK_PIN 9
- #define MISO_PIN 11
- #define MOSI_PIN 10
+ #define SCK_PIN 21
+ #define MISO_PIN 22
+ #define MOSI_PIN 23
#endif
#endif
@@ -808,48 +808,48 @@
#define KNOWN_BOARD 1
-#define X_STEP_PIN 0
-#define X_DIR_PIN 1
-#define X_ENABLE_PIN 39
-#define X_MIN_PIN 35
-#define X_MAX_PIN -1
+#define X_STEP_PIN 28
+#define X_DIR_PIN 29
+#define X_ENABLE_PIN 19
+#define X_MIN_PIN 47
+#define X_MAX_PIN -1
-#define Y_STEP_PIN 2
-#define Y_DIR_PIN 3
-#define Y_ENABLE_PIN 38
-#define Y_MIN_PIN 8
-#define Y_MAX_PIN -1
+#define Y_STEP_PIN 30
+#define Y_DIR_PIN 31
+#define Y_ENABLE_PIN 18
+#define Y_MIN_PIN 20
+#define Y_MAX_PIN -1
-#define Z_STEP_PIN 4
-#define Z_DIR_PIN 5
-#define Z_ENABLE_PIN 23
-#define Z_MIN_PIN 36
-#define Z_MAX_PIN -1
+#define Z_STEP_PIN 32
+#define Z_DIR_PIN 33
+#define Z_ENABLE_PIN 17
+#define Z_MIN_PIN 36
+#define Z_MAX_PIN -1
-#define E_STEP_PIN 6
-#define E_DIR_PIN 7
-#define E_ENABLE_PIN 19
+#define E_STEP_PIN 34
+#define E_DIR_PIN 35
+#define E_ENABLE_PIN 13
-#define HEATER_0_PIN 21 // Extruder
-#define HEATER_1_PIN 20 // Bed
-#define FAN_PIN 22 // Fan
+#define HEATER_0_PIN 15 // Extruder
+#define HEATER_1_PIN 14 // Bed
+#define FAN_PIN 16 // Fan
-#define TEMP_0_PIN 1 // Extruder
-#define TEMP_1_PIN 0 // Bed
+#define TEMP_0_PIN 1 // Extruder
+#define TEMP_1_PIN 0 // Bed
-#define SDPOWER -1
-#define SDSS 26
-#define LED_PIN -1
-#define PS_ON_PIN -1
-#define KILL_PIN -1
+#define SDPOWER -1
+#define SDSS 2
+#define LED_PIN -1
+#define PS_ON_PIN -1
+#define KILL_PIN -1
#ifndef SDSUPPORT
// these pins are defined in the SD library if building with SD support
-#define SCK_PIN 9
-#define MISO_PIN 11
-#define MOSI_PIN 10
+ #define SCK_PIN 21
+ #define MISO_PIN 22
+ #define MOSI_PIN 23
#endif
#endif