diff options
Diffstat (limited to 'Sprinter/pins.h')
-rw-r--r-- | Sprinter/pins.h | 131 |
1 files changed, 127 insertions, 4 deletions
diff --git a/Sprinter/pins.h b/Sprinter/pins.h index aeb747d..93b69ae 100644 --- a/Sprinter/pins.h +++ b/Sprinter/pins.h @@ -98,7 +98,7 @@ #if MOTHERBOARD == 1 #define KNOWN_BOARD 1 -#ifndef __AVR_ATmega644P__ +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. #endif @@ -148,7 +148,7 @@ #if MOTHERBOARD == 2 #define KNOWN_BOARD 1 -#ifndef __AVR_ATmega644P__ +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. #endif @@ -201,6 +201,129 @@ #endif /**************************************************************************************** +* Gen3 PLUS +* +****************************************************************************************/ +#if MOTHERBOARD == 21 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ + #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + + +//x axis pins +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 +#define X_MIN_PIN 20 +#define X_MAX_PIN -1 + +//y axis pins +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 +#define Y_MIN_PIN 25 +#define Y_MAX_PIN -1 + +//z axis pins +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN -1 + +#define E_DIR_PIN 21 +#define E_STEP_PIN 17 +#define E_ENABLE_PIN 13 + +//heaters + +//pin for hot end heater +#define HEATER_0_PIN 12 + +//Pin for heated bed heater +#define HEATER_1_PIN 5 + + +//pin for debugging. +#define DEBUG_PIN -1 + +//SD card pin + +#define SDSS 4 + +#define SDPOWER -1 +#define FAN_PIN -1 +#define TEMP_0_PIN 0 +#define TEMP_1_PIN 5 +#define LED_PIN -1 + +//pin for controlling the PSU. +#define PS_ON_PIN 14 + +#endif + +/**************************************************************************************** +* Gen3 Monolithic Electronics +* +****************************************************************************************/ +#if MOTHERBOARD == 22 +#define KNOWN_BOARD 1 + +#ifndef __AVR_ATmega644P__ + #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. +#endif + +#define DEBUG_PIN 0 + + +// x axis +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_MIN_PIN 20 +#define X_ENABLE_PIN 24 //actually uses Y_enable_pin +#define X_MAX_PIN -1 + +// y axes +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_MIN_PIN 25 +#define Y_ENABLE_PIN 24 //shared with X_enable_pin +#define Y_MAX_PIN -1 + +// z axes +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_MIN_PIN 30 +#define Z_ENABLE_PIN 29 +#define Z_MAX_PIN -1 + +//extruder pins +#define E_STEP_PIN 12 +#define E_DIR_PIN 17 +#define E_ENABLE_PIN 3 +#define HEATER_0_PIN 16 +#define TEMP_0_PIN 0 + +#define FAN_PIN -1 + +//bed pins +#define HEATER_1_PIN -1 +#define TEMP_1_PIN -1 + + +#define SDSS -1 +#define SDPOWER -1 +#define LED_PIN -1 + +//pin for controlling the PSU. +#define PS_ON_PIN 14 + +#endif + + +/**************************************************************************************** * Arduino Mega pin assignment * ****************************************************************************************/ @@ -376,7 +499,7 @@ #if MOTHERBOARD == 5 #define KNOWN_BOARD 1 -#ifndef __AVR_ATmega644P__ +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. #endif @@ -435,7 +558,7 @@ #endif #if MOTHERBOARD == 6 #define KNOWN_BOARD 1 -#ifndef __AVR_ATmega644P__ +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) #error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. #endif |