diff options
Diffstat (limited to 'Tonokip_Firmware/configuration.h')
-rw-r--r-- | Tonokip_Firmware/configuration.h | 14 |
1 files changed, 8 insertions, 6 deletions
diff --git a/Tonokip_Firmware/configuration.h b/Tonokip_Firmware/configuration.h index 81f0e29..f8de2a7 100644 --- a/Tonokip_Firmware/configuration.h +++ b/Tonokip_Firmware/configuration.h @@ -19,15 +19,17 @@ //Comment this to disable ramp acceleration #define RAMP_ACCELERATION 1 -//Uncomment this to enable exponential acceleration +//Uncomment this to enable exponential acceleration. WARNING!! This is not supported in the current version, and will be fixed before +// merging it to the stable branch. +// TODO: fix exp acceleration to correctly perform N bresenham. //#define EXP_ACCELERATION 1 //Acceleration settings #ifdef RAMP_ACCELERATION //X, Y, Z, E maximum start speed for accelerated moves. E default value is good for skeinforge 40+, for older versions raise it a lot. -float max_start_speed_units_per_second[] = {35.0,35.0,1.0,10.0}; -long max_acceleration_units_per_sq_second[] = {750,750,100,10000}; // X, Y (Z and E currently not used) max acceleration in mm/s^2 for printing moves -long max_travel_acceleration_units_per_sq_second[] = {1500,1500,100}; // X, Y (Z currently not used) max acceleration in mm/s^2 for travel moves +float max_start_speed_units_per_second[] = {35.0,35.0,0.2,10.0}; +long max_acceleration_units_per_sq_second[] = {750,750,50,4000}; // X, Y, Z (E currently not used) max acceleration in mm/s^2 for printing moves +long max_travel_acceleration_units_per_sq_second[] = {1500,1500,50}; // X, Y, Z max acceleration in mm/s^2 for travel moves #endif #ifdef EXP_ACCELERATION float full_velocity_units = 10; // the units between minimum and G1 move feedrate @@ -89,8 +91,8 @@ float min_constant_speed_units = 2; // the minimum units of an accelerated move //Calibration variables const int NUM_AXIS = 4; // The axis order in all axis related arrays is X, Y, Z, E float axis_steps_per_unit[] = {80.376,80.376,3200/1.25,16}; -float max_feedrate = 200000; //mmm, acceleration! -float max_z_feedrate = 120; +float max_feedrate = 200000; // mm/min, acceleration! +float max_z_feedrate = 180; // mm/min, acceleration! //float x_steps_per_unit = 10.047; //float y_steps_per_unit = 10.047; |