diff options
| author | kliment <kliment.yanev@gmail.com> | 2011-05-02 23:19:36 +0200 |
|---|---|---|
| committer | kliment <kliment.yanev@gmail.com> | 2011-05-02 23:19:36 +0200 |
| commit | e24333033826c2f6ce7b76ff422e3011448ec250 (patch) | |
| tree | 2d1f758b2ffb3b3dc212fd1b8357ad22c7a98f0b /Tonokip_Firmware | |
| parent | 3c67e2b0e00ecf0f874451395a383e3589cc10cb (diff) | |
Fix trailing semicolon in #define
Diffstat (limited to 'Tonokip_Firmware')
| -rw-r--r-- | Tonokip_Firmware/configuration.h | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/Tonokip_Firmware/configuration.h b/Tonokip_Firmware/configuration.h index 2e1820d..e4f6773 100644 --- a/Tonokip_Firmware/configuration.h +++ b/Tonokip_Firmware/configuration.h @@ -9,12 +9,12 @@ #define SDSUPPORT 1 //Min step delay in microseconds. If you are experiencing missing steps, try to raise the delay microseconds, but be aware this -//may probably prevent the motors from reaching the nominal speed. If you enable this, make sure STEP_DELAY_RATIO is disabled. -#define STEP_DELAY_MICROS 1; +// If you enable this, make sure STEP_DELAY_RATIO is disabled. +#define STEP_DELAY_MICROS 1 //Step delay over interval ratio. If you are still experiencing missing steps, try to uncomment the following line, but be aware this -//may probably prevent the motors from reaching the nominal speed. If you enable this, make sure STEP_DELAY_MICROS is disabled. -//#define STEP_DELAY_RATIO 0.05 +//If you enable this, make sure STEP_DELAY_MICROS is disabled. +//#define STEP_DELAY_RATIO 0.25 //Acceleration settings float full_velocity_units = 10; // the units between minimum and G1 move feedrate |