diff options
| author | kliment <kliment.yanev@gmail.com> | 2012-03-14 12:13:52 -0700 |
|---|---|---|
| committer | kliment <kliment.yanev@gmail.com> | 2012-03-14 12:13:52 -0700 |
| commit | d8e913a6b6744872c2c1bb30901b930f3670444d (patch) | |
| tree | bdf86f823d86265e61a3ead6ae7ef15563522909 /README | |
| parent | 54b68d0bf3c25de92147f35430eb1dee09eb60e2 (diff) | |
| parent | 1fee76039cb55e620fc13a42acb518647633eac0 (diff) | |
Merge pull request #150 from midopple/experimental
Fix gen7 support, fix bug in ENDSTOPS_ONLY_FOR_HOMING
Diffstat (limited to 'README')
| -rw-r--r-- | README | 4 |
1 files changed, 4 insertions, 0 deletions
@@ -95,6 +95,10 @@ also for the mentioned hardware setup 13. Click on "the arrow going to the right" button to upload (you had done steps 7,8,9 before, right ?).
If everything goes well you should see the message "Done uploading".
+if GEN7 with 20 Mhz is in use set the Fuses for Bootloader to
+lfuse= 0xF7 hfuse = 0xD4 efuse = FD
+Brownout must be 2,7 V
+
Congratulations, you have just upgraded the firmware of your RepRap !
You can use pronterface.py to do some manual verifications by moving the printer's tip along
|