diff options
author | kliment <kliment.yanev@gmail.com> | 2012-02-21 02:43:24 -0800 |
---|---|---|
committer | kliment <kliment.yanev@gmail.com> | 2012-02-21 02:43:24 -0800 |
commit | 6b44b4f9f1f15a0b38fb49370b830418e28dfc42 (patch) | |
tree | 6216bc6d1d0fb9f2133c2e18a7f5f93fd7c68a6d /Sprinter/Configuration.h | |
parent | 5a419804049810a118783c950ba7a2d78b16d026 (diff) | |
parent | 4b1b0f1d96d2be2ed3941095f40a5c2d2bbb943d (diff) |
Merge pull request #137 from midopple/experimental
EEPROM function and small Changes
Diffstat (limited to 'Sprinter/Configuration.h')
-rw-r--r-- | Sprinter/Configuration.h | 20 |
1 files changed, 19 insertions, 1 deletions
diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h index 86b7115..e17f6f4 100644 --- a/Sprinter/Configuration.h +++ b/Sprinter/Configuration.h @@ -59,6 +59,24 @@ const bool Z_ENDSTOP_INVERT = false; //Only work with Atmega1284 you need +1 kb ram //#define SD_FAST_XFER_AKTIV +//----------------------------------------------------------------------- +//// STORE SETTINGS TO EEPROM +//----------------------------------------------------------------------- +// the microcontroller can store settings in the EEPROM +// M500 - stores paramters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// M503 - Print settings +// define this to enable eeprom support +//#define USE_EEPROM_SETTINGS + +// to disable EEPROM Serial responses and decrease program space by ~1000 byte: comment this out: +// please keep turned on if you can. +//#define PRINT_EEPROM_SETTING + +//----------------------------------------------------------------------- +//// ARC Function (G2/G3 Command) +//----------------------------------------------------------------------- //Uncomment to aktivate the arc (circle) function (G2/G3 Command) //Without SD function an ARC function the used Flash is smaller 31 kb #define USE_ARC_FUNCTION @@ -126,7 +144,7 @@ const int Z_MAX_LENGTH = 100; //// MOVEMENT SETTINGS //----------------------------------------------------------------------- const int NUM_AXIS = 4; // The axis order in all axis related arrays is X, Y, Z, E -#define _MAX_FEEDRATE {400, 400, 4, 45} // (mm/sec) +#define _MAX_FEEDRATE {400, 400, 2, 45} // (mm/sec) #define _HOMING_FEEDRATE {1500,1500,120} // (mm/min) !! #define _AXIS_RELATIVE_MODES {false, false, false, false} |