Rename to Sprinter

1 files changed, 477 insertions, 0 deletions

diff --git a/Sprinter/pins.h b/Sprinter/pins.h
new file mode 100644
index 0000000..eee78e8
--- /dev/null
+++ b/Sprinter/pins.h
@@ -0,0 +1,477 @@
+#ifndef PINS_H
+#define PINS_H
+
+/****************************************************************************************
+* Arduino pin assignment
+*
+*                  ATMega168
+*                   +-\/-+
+*             PC6  1|    |28  PC5 (AI 5 / D19)
+*       (D 0) PD0  2|    |27  PC4 (AI 4 / D18)
+*       (D 1) PD1  3|    |26  PC3 (AI 3 / D17)
+*       (D 2) PD2  4|    |25  PC2 (AI 2 / D16)
+*  PWM+ (D 3) PD3  5|    |24  PC1 (AI 1 / D15)
+*       (D 4) PD4  6|    |23  PC0 (AI 0 / D14)
+*             VCC  7|    |22  GND
+*             GND  8|    |21  AREF
+*             PB6  9|    |20  AVCC
+*             PB7 10|    |19  PB5 (D 13)
+*  PWM+ (D 5) PD5 11|    |18  PB4 (D 12)
+*  PWM+ (D 6) PD6 12|    |17  PB3 (D 11) PWM
+*       (D 7) PD7 13|    |16  PB2 (D 10) PWM
+*       (D 8) PB0 14|    |15  PB1 (D 9)  PWM
+*                   +----+
+****************************************************************************************/
+#if MOTHERBOARD == 0
+#ifndef __AVR_ATmega168__
+#error Oops!  Make sure you have 'Arduino Diecimila' selected from the boards menu.
+#endif
+
+#define X_STEP_PIN          2
+#define X_DIR_PIN           3
+#define X_ENABLE_PIN       -1
+#define X_MIN_PIN           4
+#define X_MAX_PIN           9
+
+#define Y_STEP_PIN         10
+#define Y_DIR_PIN           7
+#define Y_ENABLE_PIN       -1
+#define Y_MIN_PIN           8
+#define Y_MAX_PIN          13
+
+#define Z_STEP_PIN         19
+#define Z_DIR_PIN          18
+#define Z_ENABLE_PIN        5
+#define Z_MIN_PIN          17
+#define Z_MAX_PIN          16
+
+#define E_STEP_PIN         11
+#define E_DIR_PIN          12
+#define E_ENABLE_PIN       -1
+
+#define SDPOWER          -1
+#define SDSS          -1
+#define LED_PIN            -1
+#define FAN_PIN            -1
+#define PS_ON_PIN          15
+#define KILL_PIN           -1
+
+#define HEATER_0_PIN        6
+#define TEMP_0_PIN          0    // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+
+
+
+
+
+/****************************************************************************************
+* Sanguino/RepRap Motherboard with direct-drive extruders
+*
+*                        ATMega644P
+*
+*                        +---\/---+
+*            (D 0) PB0  1|        |40  PA0 (AI 0 / D31)
+*            (D 1) PB1  2|        |39  PA1 (AI 1 / D30)
+*       INT2 (D 2) PB2  3|        |38  PA2 (AI 2 / D29)
+*        PWM (D 3) PB3  4|        |37  PA3 (AI 3 / D28)
+*        PWM (D 4) PB4  5|        |36  PA4 (AI 4 / D27)
+*       MOSI (D 5) PB5  6|        |35  PA5 (AI 5 / D26)
+*       MISO (D 6) PB6  7|        |34  PA6 (AI 6 / D25)
+*        SCK (D 7) PB7  8|        |33  PA7 (AI 7 / D24)
+*                  RST  9|        |32  AREF
+*                  VCC 10|        |31  GND 
+*                  GND 11|        |30  AVCC
+*                XTAL2 12|        |29  PC7 (D 23)
+*                XTAL1 13|        |28  PC6 (D 22)
+*       RX0 (D 8)  PD0 14|        |27  PC5 (D 21) TDI
+*       TX0 (D 9)  PD1 15|        |26  PC4 (D 20) TDO
+*  INT0 RX1 (D 10) PD2 16|        |25  PC3 (D 19) TMS
+*  INT1 TX1 (D 11) PD3 17|        |24  PC2 (D 18) TCK
+*       PWM (D 12) PD4 18|        |23  PC1 (D 17) SDA
+*       PWM (D 13) PD5 19|        |22  PC0 (D 16) SCL
+*       PWM (D 14) PD6 20|        |21  PD7 (D 15) PWM
+*                        +--------+
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 1
+#ifndef __AVR_ATmega644P__
+#error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN         15
+#define X_DIR_PIN          18
+#define X_ENABLE_PIN       19
+#define X_MIN_PIN          20
+#define X_MAX_PIN          21
+
+#define Y_STEP_PIN         23
+#define Y_DIR_PIN          22
+#define Y_ENABLE_PIN       19
+#define Y_MIN_PIN          25
+#define Y_MAX_PIN          26
+
+#define Z_STEP_PIN         29
+#define Z_DIR_PIN          30
+#define Z_ENABLE_PIN       31
+#define Z_MIN_PIN           2
+#define Z_MAX_PIN           1
+
+#define E_STEP_PIN         12
+#define E_DIR_PIN          16
+#define E_ENABLE_PIN        3
+
+#define SDPOWER          -1
+#define SDSS          -1
+#define LED_PIN             0
+#define FAN_PIN            -1
+#define PS_ON_PIN          -1
+#define KILL_PIN           -1
+
+#define HEATER_0_PIN       14
+#define TEMP_0_PIN          4 //D27   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+/*  Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31)  */
+
+
+
+
+
+
+/****************************************************************************************
+* RepRap Motherboard  ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---*******
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 2
+#ifndef __AVR_ATmega644P__
+#error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN      15
+#define X_DIR_PIN       18
+#define X_ENABLE_PIN    19
+#define X_MIN_PIN       20
+#define X_MAX_PIN       21
+
+#define Y_STEP_PIN      23
+#define Y_DIR_PIN       22
+#define Y_ENABLE_PIN    24
+#define Y_MIN_PIN       25
+#define Y_MAX_PIN       26
+
+#define Z_STEP_PINN     27
+#define Z_DIR_PINN      28
+#define Z_ENABLE_PIN    29
+#define Z_MIN_PIN       30
+#define Z_MAX_PIN       31
+
+#define E_STEP_PIN      17
+#define E_DIR_PIN       16
+#define E_ENABLE_PIN    -1
+
+#define SDPOWER          -1
+#define SDSS          4
+#define LED_PIN          0
+
+#define SD_CARD_WRITE    2
+#define SD_CARD_DETECT   3
+#define SD_CARD_SELECT   4
+
+//our RS485 pins
+#define TX_ENABLE_PIN	12
+#define RX_ENABLE_PIN	13
+
+//pin for controlling the PSU.
+#define PS_ON_PIN       14
+
+#define FAN_PIN         -1
+#define KILL_PIN        -1
+
+#define HEATER_0_PIN    -1
+#define TEMP_0_PIN      -1    // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+
+
+
+
+
+/****************************************************************************************
+* Arduino Mega pin assignment
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 3
+//////////////////FIX THIS//////////////
+#ifndef __AVR_ATmega1280__
+ #ifndef __AVR_ATmega2560__
+ #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+ #endif
+#endif
+
+// uncomment one of the following lines for RAMPS v1.3 or v1.0, comment both for v1.2 or 1.1
+// #define RAMPS_V_1_3
+// #define RAMPS_V_1_0
+
+
+#ifdef RAMPS_V_1_3
+
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+#define X_MIN_PIN           3
+#define X_MAX_PIN          -1   //2 //Max endstops default to disabled "-1", set to commented value to enable.
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+#define Y_MIN_PIN          14
+#define Y_MAX_PIN          -1   //15
+
+#define Z_STEP_PIN         46
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       62
+#define Z_MIN_PIN          18
+#define Z_MAX_PIN          -1   //19
+
+#define E_STEP_PIN         26
+#define E_DIR_PIN          28
+#define E_ENABLE_PIN       24
+
+#define SDPOWER            -1
+#define SDSS               53
+#define LED_PIN            13
+#define FAN_PIN            9
+#define PS_ON_PIN          12
+#define KILL_PIN           -1
+
+#define HEATER_0_PIN       10
+#define HEATER_1_PIN       8
+#define TEMP_0_PIN         13   // ANALOG NUMBERING
+#define TEMP_1_PIN         14   // ANALOG NUMBERING
+
+
+#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default
+
+#define X_STEP_PIN         26
+#define X_DIR_PIN          28
+#define X_ENABLE_PIN       24
+#define X_MIN_PIN           3
+#define X_MAX_PIN          -1    //2
+
+#define Y_STEP_PIN         38
+#define Y_DIR_PIN          40
+#define Y_ENABLE_PIN       36
+#define Y_MIN_PIN          16
+#define Y_MAX_PIN          -1    //17
+
+#define Z_STEP_PIN         44
+#define Z_DIR_PIN          46
+#define Z_ENABLE_PIN       42
+#define Z_MIN_PIN          18
+#define Z_MAX_PIN          -1    //19
+
+#define E_STEP_PIN         32
+#define E_DIR_PIN          34
+#define E_ENABLE_PIN       30
+
+#define SDPOWER            48
+#define SDSS               53
+#define LED_PIN            13
+#define PS_ON_PIN          -1
+#define KILL_PIN           -1
+
+
+
+#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
+  #define HEATER_0_PIN     12    // RAMPS 1.0
+  #define HEATER_1_PIN     -1    // RAMPS 1.0
+  #define FAN_PIN          11    // RAMPS 1.0
+
+#else // RAMPS_V_1_1 or RAMPS_V_1_2
+  #define HEATER_0_PIN     10    // RAMPS 1.1
+  #define HEATER_1_PIN      8    // RAMPS 1.1
+  #define FAN_PIN           9    // RAMPS 1.1
+#endif
+
+#define TEMP_0_PIN          2    // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+#define TEMP_1_PIN          1    // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+#endif
+
+// SPI for Max6675 Thermocouple 
+
+#ifndef SDSUPPORT
+// these pins are defined in the SD library if building with SD support  #define SCK_PIN          52
+  #define MISO_PIN         50
+  #define MOSI_PIN         51
+  #define MAX6675_SS       53
+#else
+  #define MAX6675_SS       49
+#endif
+
+
+
+/****************************************************************************************
+* Duemilanove w/ ATMega328P pin assignment
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 4
+#ifndef __AVR_ATmega328P__
+#error Oops!  Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN         19
+#define X_DIR_PIN          18
+#define X_ENABLE_PIN       -1
+#define X_MIN_PIN          17
+#define X_MAX_PIN          -1
+
+#define Y_STEP_PIN         10
+#define Y_DIR_PIN           7
+#define Y_ENABLE_PIN       -1
+#define Y_MIN_PIN           8
+#define Y_MAX_PIN          -1
+
+#define Z_STEP_PIN         13
+#define Z_DIR_PIN           3
+#define Z_ENABLE_PIN        2
+#define Z_MIN_PIN           4
+#define Z_MAX_PIN          -1
+
+#define E_STEP_PIN         11
+#define E_DIR_PIN          12
+#define E_ENABLE_PIN       -1
+
+#define SDPOWER          -1
+#define SDSS          -1
+#define LED_PIN            -1
+#define FAN_PIN             5
+#define PS_ON_PIN          -1
+#define KILL_PIN           -1
+
+#define HEATER_0_PIN        6
+#define TEMP_0_PIN          0    // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+
+
+
+/****************************************************************************************
+* Gen6 pin assignment
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 5
+
+#ifndef __AVR_ATmega644P__
+    #error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+//x axis pins
+    #define X_STEP_PIN      15
+    #define X_DIR_PIN       18
+    #define X_ENABLE_PIN    19
+    #define X_MIN_PIN       20
+    #define X_MAX_PIN       -1
+    
+    //y axis pins
+    #define Y_STEP_PIN      23
+    #define Y_DIR_PIN       22
+    #define Y_ENABLE_PIN    24
+    #define Y_MIN_PIN       25
+    #define Y_MAX_PIN       -1
+    
+    //z axis pins
+    #define Z_STEP_PIN      27
+    #define Z_DIR_PIN       28
+    #define Z_ENABLE_PIN    29
+    #define Z_MIN_PIN       30
+    #define Z_MAX_PIN       -1
+    
+    //extruder pins
+    #define E_STEP_PIN      4     //Edited @ EJE Electronics 20100715
+    #define E_DIR_PIN       2     //Edited @ EJE Electronics 20100715
+    #define E_ENABLE_PIN    3     //Added @ EJE Electronics 20100715
+    #define TEMP_0_PIN      5     //changed @ rkoeppl 20110410
+    #define HEATER_0_PIN    14    //changed @ rkoeppl 20110410
+    #define HEATER_1_PIN    -1    //changed @ rkoeppl 20110410
+    
+    
+    #define SDPOWER          -1
+    #define SDSS          -1
+    #define LED_PIN         -1    //changed @ rkoeppl 20110410
+    #define TEMP_1_PIN      -1    //changed @ rkoeppl 20110410
+    #define FAN_PIN         -1    //changed @ rkoeppl 20110410
+    #define PS_ON_PIN       -1    //changed @ rkoeppl 20110410
+    //our pin for debugging.
+    
+    #define DEBUG_PIN        0
+    
+    //our RS485 pins
+    #define TX_ENABLE_PIN	12
+    #define RX_ENABLE_PIN	13
+
+
+/****************************************************************************************
+* Sanguinololu pin assignment
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 6
+#ifndef __AVR_ATmega644P__
+#error Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+// uncomment the following line for Sanguinololu v1.2, comment for 1.1 or earlier.
+// #define SANGUINOLOLU_V_1_2 
+
+
+#define X_STEP_PIN         15
+#define X_DIR_PIN          21
+#define X_ENABLE_PIN       -1
+#define X_MIN_PIN          18
+#define X_MAX_PIN           -2 //2
+
+#define Y_STEP_PIN         22
+#define Y_DIR_PIN          23
+#define Y_ENABLE_PIN       -1
+#define Y_MIN_PIN          19
+#define Y_MAX_PIN          -1 //17
+
+#define Z_STEP_PIN         3
+#define Z_DIR_PIN          2
+// zenable defined by platform below
+#define Z_MIN_PIN          20
+#define Z_MAX_PIN          -1 //19
+
+#define E_STEP_PIN         1
+#define E_DIR_PIN          0
+#define E_ENABLE_PIN       -1
+
+#define LED_PIN            -1
+
+#define FAN_PIN            -1 // THIS LINE FOR V1.0
+
+#define PS_ON_PIN          -1
+#define KILL_PIN           -1
+
+#define HEATER_0_PIN       13 // THIS LINE FOR V1.0+ (extruder)
+
+#ifdef SANGUINOLOLU_V_1_2
+
+#define HEATER_1_PIN       12 // (bed)
+#define Z_ENABLE_PIN       26
+
+#else
+
+#define HEATER_1_PIN       14  // (bed)
+#define Z_ENABLE_PIN       -1
+
+#endif
+
+#define TEMP_0_PIN          7   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
+#define TEMP_1_PIN          6   // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
+#define SDPOWER          -1
+#define SDSS          31
+
+#else
+
+#error Unknown MOTHERBOARD value in configuration.h
+
+#endif
+
+#endif