summaryrefslogtreecommitdiff
path: root/Sprinter
diff options
context:
space:
mode:
authorblddk <michael.andresen@gmail.com>2012-07-07 19:15:48 +0300
committerblddk <michael.andresen@gmail.com>2012-07-07 19:15:48 +0300
commit982796f9f023ca158593a52348224ec3faf99a84 (patch)
treeba5a01ab1f6e62b555b351f85adfd56774087d0b /Sprinter
parentdd2b9ef537d24252878e91d314bf298840f3eb20 (diff)
Added chain of command so hotend wont be turned off before print is done.
Diffstat (limited to 'Sprinter')
-rw-r--r--Sprinter/Sprinter.pde23
1 files changed, 22 insertions, 1 deletions
diff --git a/Sprinter/Sprinter.pde b/Sprinter/Sprinter.pde
index cc0ed44..3620030 100644
--- a/Sprinter/Sprinter.pde
+++ b/Sprinter/Sprinter.pde
@@ -1421,6 +1421,9 @@ FORCE_INLINE void process_commands()
case 42: //M42 -Change pin status via gcode
if (code_seen('S'))
{
+#ifdef CHAIN_OF_COMMAND
+ st_synchronize(); // wait for all movements to finish
+#endif
int pin_status = code_value();
if (code_seen('P') && pin_status >= 0 && pin_status <= 255)
{
@@ -1444,6 +1447,9 @@ FORCE_INLINE void process_commands()
}
break;
case 104: // M104
+#ifdef CHAIN_OF_COMMAND
+ st_synchronize(); // wait for all movements to finish
+#endif
if (code_seen('S')) target_raw = temp2analogh(target_temp = code_value());
#ifdef WATCHPERIOD
if(target_raw > current_raw)
@@ -1458,6 +1464,9 @@ FORCE_INLINE void process_commands()
#endif
break;
case 140: // M140 set bed temp
+#ifdef CHAIN_OF_COMMAND
+ st_synchronize(); // wait for all movements to finish
+#endif
#if TEMP_1_PIN > -1 || defined BED_USES_AD595
if (code_seen('S')) target_bed_raw = temp2analogBed(code_value());
#endif
@@ -1500,6 +1509,9 @@ FORCE_INLINE void process_commands()
return;
//break;
case 109: { // M109 - Wait for extruder heater to reach target.
+#ifdef CHAIN_OF_COMMAND
+ st_synchronize(); // wait for all movements to finish
+#endif
if (code_seen('S')) target_raw = temp2analogh(target_temp = code_value());
#ifdef WATCHPERIOD
if(target_raw>current_raw)
@@ -1550,6 +1562,9 @@ FORCE_INLINE void process_commands()
}
break;
case 190: // M190 - Wait for bed heater to reach target temperature.
+#ifdef CHAIN_OF_COMMAND
+ st_synchronize(); // wait for all movements to finish
+#endif
#if TEMP_1_PIN > -1
if (code_seen('S')) target_bed_raw = temp2analogBed(code_value());
codenum = millis();
@@ -1573,6 +1588,9 @@ FORCE_INLINE void process_commands()
break;
#if FAN_PIN > -1
case 106: //M106 Fan On
+#ifdef CHAIN_OF_COMMAND
+ st_synchronize(); // wait for all movements to finish
+#endif
if (code_seen('S'))
{
unsigned char l_fan_code_val = constrain(code_value(),0,255);
@@ -1627,6 +1645,9 @@ FORCE_INLINE void process_commands()
SET_OUTPUT(PS_ON_PIN); //GND
break;
case 81: // M81 - ATX Power Off
+#ifdef CHAIN_OF_COMMAND
+ st_synchronize(); // wait for all movements to finish
+#endif
SET_INPUT(PS_ON_PIN); //Floating
break;
#endif
@@ -3508,4 +3529,4 @@ void log_ulong_array(char* message, unsigned long value[], int array_lenght) {
}
Serial.println("}");
}
-#endif
+#endif \ No newline at end of file