diff options
| author | Nils <bacardicoke@gmail.com> | 2011-05-12 23:24:59 +0200 |
|---|---|---|
| committer | Nils <bacardicoke@gmail.com> | 2011-05-12 23:24:59 +0200 |
| commit | 889d6a7c5b5e715fd49dfb559704ab1dfc009746 (patch) | |
| tree | 1f4b64531e431bc647b336e93221b9d9d5d715de /Tonokip_Firmware/Tonokip_Firmware.pde | |
| parent | 5ba9e2683c46e10179705629f35dd4d66c68087e (diff) | |
Removing MCode for overheat protection
Diffstat (limited to 'Tonokip_Firmware/Tonokip_Firmware.pde')
| -rw-r--r-- | Tonokip_Firmware/Tonokip_Firmware.pde | 4 |
1 files changed, 0 insertions, 4 deletions
diff --git a/Tonokip_Firmware/Tonokip_Firmware.pde b/Tonokip_Firmware/Tonokip_Firmware.pde index 43434b1..c2ad00e 100644 --- a/Tonokip_Firmware/Tonokip_Firmware.pde +++ b/Tonokip_Firmware/Tonokip_Firmware.pde @@ -52,7 +52,6 @@ // M92 - Set axis_steps_per_unit - same syntax as G92 // M115 - Capabilities string // M140 - Set bed target temp -// M143 - Set maximum hot-end temperature // M190 - Wait for bed current temp to reach target temp. // M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) // M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) @@ -660,9 +659,6 @@ inline void process_commands() case 140: // M140 set bed temp if (code_seen('S')) target_bed_raw = temp2analogBed(code_value()); break; - case 143: // M143 set maximum hotend temperature - if (code_seen('S')) maxttemp = temp2analog(code_value()); - break; case 105: // M105 #if (TEMP_0_PIN>-1) || defined (HEATER_USES_MAX6675) tt=analog2temp(current_raw); |