Added Makefile and declared required functions in .pde to support it working.

Tested on various configs with arduinio-0022.  Note you have to edit the first few lines
of the Makefile to match your config.

1 files changed, 33 insertions, 0 deletions

diff --git a/Tonokip_Firmware/Tonokip_Firmware.pde b/Tonokip_Firmware/Tonokip_Firmware.pde
index 87935c1..508becf 100644
--- a/Tonokip_Firmware/Tonokip_Firmware.pde
+++ b/Tonokip_Firmware/Tonokip_Firmware.pde
@@ -8,6 +8,39 @@
 #include "SdFat.h"
 #endif
 
+void get_command();
+void process_commands();
+
+void manage_inactivity(byte debug);
+
+void manage_heater();
+float temp2analog(int celsius);
+float temp2analogBed(int celsius);
+float analog2temp(int raw);
+float analog2tempBed(int raw);
+
+void FlushSerialRequestResend();
+void ClearToSend();
+
+void get_coordinates();
+void linear_move(unsigned long x_steps_remaining, unsigned long y_steps_remaining, unsigned long z_steps_remaining, unsigned long e_steps_remaining);
+void disable_x();
+void disable_y();
+void disable_z();
+void disable_e();
+void enable_x();
+void enable_y();
+void enable_z();
+void enable_e();
+void do_x_step();
+void do_y_step();
+void do_z_step();
+void do_e_step();
+
+void kill(byte debug);
+
+
+
 // look here for descriptions of gcodes: http://linuxcnc.org/handbook/gcode/g-code.html
 // http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes