diff options
Diffstat (limited to 'Sprinter/Configuration.h')
| -rw-r--r-- | Sprinter/Configuration.h | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h index 2ee4b39..e17f6f4 100644 --- a/Sprinter/Configuration.h +++ b/Sprinter/Configuration.h @@ -59,6 +59,24 @@ const bool Z_ENDSTOP_INVERT = false; //Only work with Atmega1284 you need +1 kb ram //#define SD_FAST_XFER_AKTIV +//----------------------------------------------------------------------- +//// STORE SETTINGS TO EEPROM +//----------------------------------------------------------------------- +// the microcontroller can store settings in the EEPROM +// M500 - stores paramters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// M503 - Print settings +// define this to enable eeprom support +//#define USE_EEPROM_SETTINGS + +// to disable EEPROM Serial responses and decrease program space by ~1000 byte: comment this out: +// please keep turned on if you can. +//#define PRINT_EEPROM_SETTING + +//----------------------------------------------------------------------- +//// ARC Function (G2/G3 Command) +//----------------------------------------------------------------------- //Uncomment to aktivate the arc (circle) function (G2/G3 Command) //Without SD function an ARC function the used Flash is smaller 31 kb #define USE_ARC_FUNCTION |