diff options
Diffstat (limited to 'Sprinter/FatStructs.h')
| -rw-r--r-- | Sprinter/FatStructs.h | 418 |
1 files changed, 418 insertions, 0 deletions
diff --git a/Sprinter/FatStructs.h b/Sprinter/FatStructs.h new file mode 100644 index 0000000..f5bdaa5 --- /dev/null +++ b/Sprinter/FatStructs.h @@ -0,0 +1,418 @@ +/* Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino SdFat Library
+ *
+ * This Library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This Library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the Arduino SdFat Library. If not, see
+ * <http://www.gnu.org/licenses/>.
+ */
+#ifndef FatStructs_h
+#define FatStructs_h
+/**
+ * \file
+ * FAT file structures
+ */
+/*
+ * mostly from Microsoft document fatgen103.doc
+ * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
+ */
+//------------------------------------------------------------------------------
+/** Value for byte 510 of boot block or MBR */
+uint8_t const BOOTSIG0 = 0X55;
+/** Value for byte 511 of boot block or MBR */
+uint8_t const BOOTSIG1 = 0XAA;
+//------------------------------------------------------------------------------
+/**
+ * \struct partitionTable
+ * \brief MBR partition table entry
+ *
+ * A partition table entry for a MBR formatted storage device.
+ * The MBR partition table has four entries.
+ */
+struct partitionTable {
+ /**
+ * Boot Indicator . Indicates whether the volume is the active
+ * partition. Legal values include: 0X00. Do not use for booting.
+ * 0X80 Active partition.
+ */
+ uint8_t boot;
+ /**
+ * Head part of Cylinder-head-sector address of the first block in
+ * the partition. Legal values are 0-255. Only used in old PC BIOS.
+ */
+ uint8_t beginHead;
+ /**
+ * Sector part of Cylinder-head-sector address of the first block in
+ * the partition. Legal values are 1-63. Only used in old PC BIOS.
+ */
+ unsigned beginSector : 6;
+ /** High bits cylinder for first block in partition. */
+ unsigned beginCylinderHigh : 2;
+ /**
+ * Combine beginCylinderLow with beginCylinderHigh. Legal values
+ * are 0-1023. Only used in old PC BIOS.
+ */
+ uint8_t beginCylinderLow;
+ /**
+ * Partition type. See defines that begin with PART_TYPE_ for
+ * some Microsoft partition types.
+ */
+ uint8_t type;
+ /**
+ * head part of cylinder-head-sector address of the last sector in the
+ * partition. Legal values are 0-255. Only used in old PC BIOS.
+ */
+ uint8_t endHead;
+ /**
+ * Sector part of cylinder-head-sector address of the last sector in
+ * the partition. Legal values are 1-63. Only used in old PC BIOS.
+ */
+ unsigned endSector : 6;
+ /** High bits of end cylinder */
+ unsigned endCylinderHigh : 2;
+ /**
+ * Combine endCylinderLow with endCylinderHigh. Legal values
+ * are 0-1023. Only used in old PC BIOS.
+ */
+ uint8_t endCylinderLow;
+ /** Logical block address of the first block in the partition. */
+ uint32_t firstSector;
+ /** Length of the partition, in blocks. */
+ uint32_t totalSectors;
+};
+/** Type name for partitionTable */
+typedef struct partitionTable part_t;
+//------------------------------------------------------------------------------
+/**
+ * \struct masterBootRecord
+ *
+ * \brief Master Boot Record
+ *
+ * The first block of a storage device that is formatted with a MBR.
+ */
+struct masterBootRecord {
+ /** Code Area for master boot program. */
+ uint8_t codeArea[440];
+ /** Optional WindowsNT disk signature. May contain more boot code. */
+ uint32_t diskSignature;
+ /** Usually zero but may be more boot code. */
+ uint16_t usuallyZero;
+ /** Partition tables. */
+ part_t part[4];
+ /** First MBR signature byte. Must be 0X55 */
+ uint8_t mbrSig0;
+ /** Second MBR signature byte. Must be 0XAA */
+ uint8_t mbrSig1;
+};
+/** Type name for masterBootRecord */
+typedef struct masterBootRecord mbr_t;
+//------------------------------------------------------------------------------
+/**
+ * \struct biosParmBlock
+ *
+ * \brief BIOS parameter block
+ *
+ * The BIOS parameter block describes the physical layout of a FAT volume.
+ */
+struct biosParmBlock {
+ /**
+ * Count of bytes per sector. This value may take on only the
+ * following values: 512, 1024, 2048 or 4096
+ */
+ uint16_t bytesPerSector;
+ /**
+ * Number of sectors per allocation unit. This value must be a
+ * power of 2 that is greater than 0. The legal values are
+ * 1, 2, 4, 8, 16, 32, 64, and 128.
+ */
+ uint8_t sectorsPerCluster;
+ /**
+ * Number of sectors before the first FAT.
+ * This value must not be zero.
+ */
+ uint16_t reservedSectorCount;
+ /** The count of FAT data structures on the volume. This field should
+ * always contain the value 2 for any FAT volume of any type.
+ */
+ uint8_t fatCount;
+ /**
+ * For FAT12 and FAT16 volumes, this field contains the count of
+ * 32-byte directory entries in the root directory. For FAT32 volumes,
+ * this field must be set to 0. For FAT12 and FAT16 volumes, this
+ * value should always specify a count that when multiplied by 32
+ * results in a multiple of bytesPerSector. FAT16 volumes should
+ * use the value 512.
+ */
+ uint16_t rootDirEntryCount;
+ /**
+ * This field is the old 16-bit total count of sectors on the volume.
+ * This count includes the count of all sectors in all four regions
+ * of the volume. This field can be 0; if it is 0, then totalSectors32
+ * must be non-zero. For FAT32 volumes, this field must be 0. For
+ * FAT12 and FAT16 volumes, this field contains the sector count, and
+ * totalSectors32 is 0 if the total sector count fits
+ * (is less than 0x10000).
+ */
+ uint16_t totalSectors16;
+ /**
+ * This dates back to the old MS-DOS 1.x media determination and is
+ * no longer usually used for anything. 0xF8 is the standard value
+ * for fixed (non-removable) media. For removable media, 0xF0 is
+ * frequently used. Legal values are 0xF0 or 0xF8-0xFF.
+ */
+ uint8_t mediaType;
+ /**
+ * Count of sectors occupied by one FAT on FAT12/FAT16 volumes.
+ * On FAT32 volumes this field must be 0, and sectorsPerFat32
+ * contains the FAT size count.
+ */
+ uint16_t sectorsPerFat16;
+ /** Sectors per track for interrupt 0x13. Not used otherwise. */
+ uint16_t sectorsPerTrtack;
+ /** Number of heads for interrupt 0x13. Not used otherwise. */
+ uint16_t headCount;
+ /**
+ * Count of hidden sectors preceding the partition that contains this
+ * FAT volume. This field is generally only relevant for media
+ * visible on interrupt 0x13.
+ */
+ uint32_t hidddenSectors;
+ /**
+ * This field is the new 32-bit total count of sectors on the volume.
+ * This count includes the count of all sectors in all four regions
+ * of the volume. This field can be 0; if it is 0, then
+ * totalSectors16 must be non-zero.
+ */
+ uint32_t totalSectors32;
+ /**
+ * Count of sectors occupied by one FAT on FAT32 volumes.
+ */
+ uint32_t sectorsPerFat32;
+ /**
+ * This field is only defined for FAT32 media and does not exist on
+ * FAT12 and FAT16 media.
+ * Bits 0-3 -- Zero-based number of active FAT.
+ * Only valid if mirroring is disabled.
+ * Bits 4-6 -- Reserved.
+ * Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs.
+ * -- 1 means only one FAT is active; it is the one referenced in bits 0-3.
+ * Bits 8-15 -- Reserved.
+ */
+ uint16_t fat32Flags;
+ /**
+ * FAT32 version. High byte is major revision number.
+ * Low byte is minor revision number. Only 0.0 define.
+ */
+ uint16_t fat32Version;
+ /**
+ * Cluster number of the first cluster of the root directory for FAT32.
+ * This usually 2 but not required to be 2.
+ */
+ uint32_t fat32RootCluster;
+ /**
+ * Sector number of FSINFO structure in the reserved area of the
+ * FAT32 volume. Usually 1.
+ */
+ uint16_t fat32FSInfo;
+ /**
+ * If non-zero, indicates the sector number in the reserved area
+ * of the volume of a copy of the boot record. Usually 6.
+ * No value other than 6 is recommended.
+ */
+ uint16_t fat32BackBootBlock;
+ /**
+ * Reserved for future expansion. Code that formats FAT32 volumes
+ * should always set all of the bytes of this field to 0.
+ */
+ uint8_t fat32Reserved[12];
+};
+/** Type name for biosParmBlock */
+typedef struct biosParmBlock bpb_t;
+//------------------------------------------------------------------------------
+/**
+ * \struct fat32BootSector
+ *
+ * \brief Boot sector for a FAT16 or FAT32 volume.
+ *
+ */
+struct fat32BootSector {
+ /** X86 jmp to boot program */
+ uint8_t jmpToBootCode[3];
+ /** informational only - don't depend on it */
+ char oemName[8];
+ /** BIOS Parameter Block */
+ bpb_t bpb;
+ /** for int0x13 use value 0X80 for hard drive */
+ uint8_t driveNumber;
+ /** used by Windows NT - should be zero for FAT */
+ uint8_t reserved1;
+ /** 0X29 if next three fields are valid */
+ uint8_t bootSignature;
+ /** usually generated by combining date and time */
+ uint32_t volumeSerialNumber;
+ /** should match volume label in root dir */
+ char volumeLabel[11];
+ /** informational only - don't depend on it */
+ char fileSystemType[8];
+ /** X86 boot code */
+ uint8_t bootCode[420];
+ /** must be 0X55 */
+ uint8_t bootSectorSig0;
+ /** must be 0XAA */
+ uint8_t bootSectorSig1;
+};
+//------------------------------------------------------------------------------
+// End Of Chain values for FAT entries
+/** FAT16 end of chain value used by Microsoft. */
+uint16_t const FAT16EOC = 0XFFFF;
+/** Minimum value for FAT16 EOC. Use to test for EOC. */
+uint16_t const FAT16EOC_MIN = 0XFFF8;
+/** FAT32 end of chain value used by Microsoft. */
+uint32_t const FAT32EOC = 0X0FFFFFFF;
+/** Minimum value for FAT32 EOC. Use to test for EOC. */
+uint32_t const FAT32EOC_MIN = 0X0FFFFFF8;
+/** Mask a for FAT32 entry. Entries are 28 bits. */
+uint32_t const FAT32MASK = 0X0FFFFFFF;
+
+/** Type name for fat32BootSector */
+typedef struct fat32BootSector fbs_t;
+//------------------------------------------------------------------------------
+/**
+ * \struct directoryEntry
+ * \brief FAT short directory entry
+ *
+ * Short means short 8.3 name, not the entry size.
+ *
+ * Date Format. A FAT directory entry date stamp is a 16-bit field that is
+ * basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the
+ * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the
+ * 16-bit word):
+ *
+ * Bits 9-15: Count of years from 1980, valid value range 0-127
+ * inclusive (1980-2107).
+ *
+ * Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.
+ *
+ * Bits 0-4: Day of month, valid value range 1-31 inclusive.
+ *
+ * Time Format. A FAT directory entry time stamp is a 16-bit field that has
+ * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the
+ * 16-bit word, bit 15 is the MSB of the 16-bit word).
+ *
+ * Bits 11-15: Hours, valid value range 0-23 inclusive.
+ *
+ * Bits 5-10: Minutes, valid value range 0-59 inclusive.
+ *
+ * Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).
+ *
+ * The valid time range is from Midnight 00:00:00 to 23:59:58.
+ */
+struct directoryEntry {
+ /**
+ * Short 8.3 name.
+ * The first eight bytes contain the file name with blank fill.
+ * The last three bytes contain the file extension with blank fill.
+ */
+ uint8_t name[11];
+ /** Entry attributes.
+ *
+ * The upper two bits of the attribute byte are reserved and should
+ * always be set to 0 when a file is created and never modified or
+ * looked at after that. See defines that begin with DIR_ATT_.
+ */
+ uint8_t attributes;
+ /**
+ * Reserved for use by Windows NT. Set value to 0 when a file is
+ * created and never modify or look at it after that.
+ */
+ uint8_t reservedNT;
+ /**
+ * The granularity of the seconds part of creationTime is 2 seconds
+ * so this field is a count of tenths of a second and its valid
+ * value range is 0-199 inclusive. (WHG note - seems to be hundredths)
+ */
+ uint8_t creationTimeTenths;
+ /** Time file was created. */
+ uint16_t creationTime;
+ /** Date file was created. */
+ uint16_t creationDate;
+ /**
+ * Last access date. Note that there is no last access time, only
+ * a date. This is the date of last read or write. In the case of
+ * a write, this should be set to the same date as lastWriteDate.
+ */
+ uint16_t lastAccessDate;
+ /**
+ * High word of this entry's first cluster number (always 0 for a
+ * FAT12 or FAT16 volume).
+ */
+ uint16_t firstClusterHigh;
+ /** Time of last write. File creation is considered a write. */
+ uint16_t lastWriteTime;
+ /** Date of last write. File creation is considered a write. */
+ uint16_t lastWriteDate;
+ /** Low word of this entry's first cluster number. */
+ uint16_t firstClusterLow;
+ /** 32-bit unsigned holding this file's size in bytes. */
+ uint32_t fileSize;
+};
+//------------------------------------------------------------------------------
+// Definitions for directory entries
+//
+/** Type name for directoryEntry */
+typedef struct directoryEntry dir_t;
+/** escape for name[0] = 0XE5 */
+uint8_t const DIR_NAME_0XE5 = 0X05;
+/** name[0] value for entry that is free after being "deleted" */
+uint8_t const DIR_NAME_DELETED = 0XE5;
+/** name[0] value for entry that is free and no allocated entries follow */
+uint8_t const DIR_NAME_FREE = 0X00;
+/** file is read-only */
+uint8_t const DIR_ATT_READ_ONLY = 0X01;
+/** File should hidden in directory listings */
+uint8_t const DIR_ATT_HIDDEN = 0X02;
+/** Entry is for a system file */
+uint8_t const DIR_ATT_SYSTEM = 0X04;
+/** Directory entry contains the volume label */
+uint8_t const DIR_ATT_VOLUME_ID = 0X08;
+/** Entry is for a directory */
+uint8_t const DIR_ATT_DIRECTORY = 0X10;
+/** Old DOS archive bit for backup support */
+uint8_t const DIR_ATT_ARCHIVE = 0X20;
+/** Test value for long name entry. Test is
+ (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */
+uint8_t const DIR_ATT_LONG_NAME = 0X0F;
+/** Test mask for long name entry */
+uint8_t const DIR_ATT_LONG_NAME_MASK = 0X3F;
+/** defined attribute bits */
+uint8_t const DIR_ATT_DEFINED_BITS = 0X3F;
+/** Directory entry is part of a long name */
+static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {
+ return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;
+}
+/** Mask for file/subdirectory tests */
+uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);
+/** Directory entry is for a file */
+static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
+ return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;
+}
+/** Directory entry is for a subdirectory */
+static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
+ return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;
+}
+/** Directory entry is for a file or subdirectory */
+static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {
+ return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;
+}
+#endif // FatStructs_h
|