summaryrefslogtreecommitdiff
path: root/Tonokip_Firmware/Tonokip_Firmware.pde
diff options
context:
space:
mode:
Diffstat (limited to 'Tonokip_Firmware/Tonokip_Firmware.pde')
-rw-r--r--Tonokip_Firmware/Tonokip_Firmware.pde223
1 files changed, 146 insertions, 77 deletions
diff --git a/Tonokip_Firmware/Tonokip_Firmware.pde b/Tonokip_Firmware/Tonokip_Firmware.pde
index 4dcd2aa..24557a2 100644
--- a/Tonokip_Firmware/Tonokip_Firmware.pde
+++ b/Tonokip_Firmware/Tonokip_Firmware.pde
@@ -264,15 +264,11 @@ void setup()
initsd();
#endif
-
-
}
void loop()
{
-
-
if(buflen<3)
get_command();
@@ -453,78 +449,7 @@ inline void process_commands()
case 0: // G0 -> G1
case 1: // G1
get_coordinates(); // For X Y Z E F
- xdiff=(destination_x - current_x);
- ydiff=(destination_y - current_y);
- zdiff=(destination_z - current_z);
- ediff=(destination_e - current_e);
- x_steps_to_take = abs(xdiff)*x_steps_per_unit;
- y_steps_to_take = abs(ydiff)*y_steps_per_unit;
- z_steps_to_take = abs(zdiff)*z_steps_per_unit;
- e_steps_to_take = abs(ediff)*e_steps_per_unit;
- if(feedrate<10)
- feedrate=10;
- /*
- //experimental feedrate calc
- if(abs(xdiff)>0.1 && abs(ydiff)>0.1)
- d=sqrt(xdiff*xdiff+ydiff*ydiff);
- else if(abs(xdiff)>0.1)
- d=abs(xdiff);
- else if(abs(ydiff)>0.1)
- d=abs(ydiff);
- else if(abs(zdiff)>0.05)
- d=abs(zdiff);
- else if(abs(ediff)>0.1)
- d=abs(ediff);
- else d=1; //extremely slow move, should be okay for moves under 0.1mm
- time_for_move=(xdiff/(feedrate/60000000));
- //time=60000000*dist/feedrate
- //int feedz=(60000000*zdiff)/time_for_move;
- //if(feedz>maxfeed)
- */
- #define X_TIME_FOR_MOVE ((float)x_steps_to_take / (x_steps_per_unit*feedrate/60000000))
- #define Y_TIME_FOR_MOVE ((float)y_steps_to_take / (y_steps_per_unit*feedrate/60000000))
- #define Z_TIME_FOR_MOVE ((float)z_steps_to_take / (z_steps_per_unit*z_feedrate/60000000))
- #define E_TIME_FOR_MOVE ((float)e_steps_to_take / (e_steps_per_unit*feedrate/60000000))
-
- time_for_move = max(X_TIME_FOR_MOVE,Y_TIME_FOR_MOVE);
- time_for_move = max(time_for_move,Z_TIME_FOR_MOVE);
- if(time_for_move <= 0) time_for_move = max(time_for_move,E_TIME_FOR_MOVE);
-
- if(x_steps_to_take) x_interval = time_for_move/x_steps_to_take*100;
- if(y_steps_to_take) y_interval = time_for_move/y_steps_to_take*100;
- if(z_steps_to_take) z_interval = time_for_move/z_steps_to_take*100;
- if(e_steps_to_take && (x_steps_to_take + y_steps_to_take <= 0)) e_interval = time_for_move/e_steps_to_take*100;
-
- //#define DEBUGGING false
- #if 0
- if(0) {
- Serial.print("destination_x: "); Serial.println(destination_x);
- Serial.print("current_x: "); Serial.println(current_x);
- Serial.print("x_steps_to_take: "); Serial.println(x_steps_to_take);
- Serial.print("X_TIME_FOR_MVE: "); Serial.println(X_TIME_FOR_MOVE);
- Serial.print("x_interval: "); Serial.println(x_interval);
- Serial.println("");
- Serial.print("destination_y: "); Serial.println(destination_y);
- Serial.print("current_y: "); Serial.println(current_y);
- Serial.print("y_steps_to_take: "); Serial.println(y_steps_to_take);
- Serial.print("Y_TIME_FOR_MVE: "); Serial.println(Y_TIME_FOR_MOVE);
- Serial.print("y_interval: "); Serial.println(y_interval);
- Serial.println("");
- Serial.print("destination_z: "); Serial.println(destination_z);
- Serial.print("current_z: "); Serial.println(current_z);
- Serial.print("z_steps_to_take: "); Serial.println(z_steps_to_take);
- Serial.print("Z_TIME_FOR_MVE: "); Serial.println(Z_TIME_FOR_MOVE);
- Serial.print("z_interval: "); Serial.println(z_interval);
- Serial.println("");
- Serial.print("destination_e: "); Serial.println(destination_e);
- Serial.print("current_e: "); Serial.println(current_e);
- Serial.print("e_steps_to_take: "); Serial.println(e_steps_to_take);
- Serial.print("E_TIME_FOR_MVE: "); Serial.println(E_TIME_FOR_MOVE);
- Serial.print("e_interval: "); Serial.println(e_interval);
- Serial.println("");
- }
- #endif
- linear_move(x_steps_to_take, y_steps_to_take, z_steps_to_take, e_steps_to_take); // make the move
+ prepare_move();
previous_millis_cmd = millis();
//ClearToSend();
return;
@@ -536,6 +461,73 @@ inline void process_commands()
previous_millis_heater = millis(); // keep track of when we started waiting
while((millis() - previous_millis_heater) < codenum ) manage_heater(); //manage heater until time is up
break;
+ case 28: //G28 Home all Axis one at a time
+ destination_x = 0;
+ current_x = 0;
+ destination_y = 0;
+ current_y = 0;
+ destination_z = 0;
+ current_z = 0;
+ destination_e = 0;
+ current_e = 0;
+ feedrate = 0;
+
+ if(X_MIN_PIN > -1) {
+ current_x = 0;
+ destination_x = -250;
+ feedrate = min_units_per_second*60;
+ prepare_move();
+
+ current_x = 0;
+ destination_x = 1;
+ prepare_move();
+
+ destination_x = -10;
+ prepare_move();
+
+ current_x = 0;
+ destination_x = 0;
+ feedrate = 0;
+ }
+
+ if(Y_MIN_PIN > -1) {
+ current_y = 0;
+ destination_y = -250;
+ feedrate = min_units_per_second*60;
+ prepare_move();
+
+ current_y = 0;
+ destination_y = 1;
+ prepare_move();
+
+ destination_y = -10;
+ prepare_move();
+
+ current_y = 0;
+ destination_y = 0;
+ feedrate = 0;
+ }
+
+ if(Z_MIN_PIN > -1) {
+ current_z = 0;
+ destination_z = -250;
+ feedrate = max_z_feedrate/2;
+ prepare_move();
+
+ current_z = 0;
+ destination_z = 1;
+ prepare_move();
+
+ destination_z = -10;
+ prepare_move();
+
+ current_z = 0;
+ destination_z = 0;
+ feedrate = 0;
+ }
+
+ previous_millis_cmd = millis();
+ break;
case 90: // G90
relative_mode = false;
break;
@@ -836,7 +828,10 @@ inline void get_coordinates()
next_feedrate = code_value();
if(next_feedrate > 0.0) feedrate = next_feedrate;
}
-
+}
+
+void prepare_move()
+{
//Find direction
if(destination_x >= current_x) direction_x=1;
else direction_x=0;
@@ -864,6 +859,80 @@ inline void get_coordinates()
if(feedrate > max_z_feedrate) z_feedrate = max_z_feedrate;
else z_feedrate=feedrate;
+
+ xdiff=(destination_x - current_x);
+ ydiff=(destination_y - current_y);
+ zdiff=(destination_z - current_z);
+ ediff=(destination_e - current_e);
+ x_steps_to_take = abs(xdiff)*x_steps_per_unit;
+ y_steps_to_take = abs(ydiff)*y_steps_per_unit;
+ z_steps_to_take = abs(zdiff)*z_steps_per_unit;
+ e_steps_to_take = abs(ediff)*e_steps_per_unit;
+ if(feedrate<10)
+ feedrate=10;
+ /*
+ //experimental feedrate calc
+ if(abs(xdiff)>0.1 && abs(ydiff)>0.1)
+ d=sqrt(xdiff*xdiff+ydiff*ydiff);
+ else if(abs(xdiff)>0.1)
+ d=abs(xdiff);
+ else if(abs(ydiff)>0.1)
+ d=abs(ydiff);
+ else if(abs(zdiff)>0.05)
+ d=abs(zdiff);
+ else if(abs(ediff)>0.1)
+ d=abs(ediff);
+ else d=1; //extremely slow move, should be okay for moves under 0.1mm
+ time_for_move=(xdiff/(feedrate/60000000));
+ //time=60000000*dist/feedrate
+ //int feedz=(60000000*zdiff)/time_for_move;
+ //if(feedz>maxfeed)
+ */
+ #define X_TIME_FOR_MOVE ((float)x_steps_to_take / (x_steps_per_unit*feedrate/60000000))
+ #define Y_TIME_FOR_MOVE ((float)y_steps_to_take / (y_steps_per_unit*feedrate/60000000))
+ #define Z_TIME_FOR_MOVE ((float)z_steps_to_take / (z_steps_per_unit*z_feedrate/60000000))
+ #define E_TIME_FOR_MOVE ((float)e_steps_to_take / (e_steps_per_unit*feedrate/60000000))
+
+ time_for_move = max(X_TIME_FOR_MOVE,Y_TIME_FOR_MOVE);
+ time_for_move = max(time_for_move,Z_TIME_FOR_MOVE);
+ if(time_for_move <= 0) time_for_move = max(time_for_move,E_TIME_FOR_MOVE);
+
+ if(x_steps_to_take) x_interval = time_for_move/x_steps_to_take*100;
+ if(y_steps_to_take) y_interval = time_for_move/y_steps_to_take*100;
+ if(z_steps_to_take) z_interval = time_for_move/z_steps_to_take*100;
+ if(e_steps_to_take && (x_steps_to_take + y_steps_to_take <= 0)) e_interval = time_for_move/e_steps_to_take*100;
+
+ //#define DEBUGGING false
+ #if 0
+ if(0) {
+ Serial.print("destination_x: "); Serial.println(destination_x);
+ Serial.print("current_x: "); Serial.println(current_x);
+ Serial.print("x_steps_to_take: "); Serial.println(x_steps_to_take);
+ Serial.print("X_TIME_FOR_MVE: "); Serial.println(X_TIME_FOR_MOVE);
+ Serial.print("x_interval: "); Serial.println(x_interval);
+ Serial.println("");
+ Serial.print("destination_y: "); Serial.println(destination_y);
+ Serial.print("current_y: "); Serial.println(current_y);
+ Serial.print("y_steps_to_take: "); Serial.println(y_steps_to_take);
+ Serial.print("Y_TIME_FOR_MVE: "); Serial.println(Y_TIME_FOR_MOVE);
+ Serial.print("y_interval: "); Serial.println(y_interval);
+ Serial.println("");
+ Serial.print("destination_z: "); Serial.println(destination_z);
+ Serial.print("current_z: "); Serial.println(current_z);
+ Serial.print("z_steps_to_take: "); Serial.println(z_steps_to_take);
+ Serial.print("Z_TIME_FOR_MVE: "); Serial.println(Z_TIME_FOR_MOVE);
+ Serial.print("z_interval: "); Serial.println(z_interval);
+ Serial.println("");
+ Serial.print("destination_e: "); Serial.println(destination_e);
+ Serial.print("current_e: "); Serial.println(current_e);
+ Serial.print("e_steps_to_take: "); Serial.println(e_steps_to_take);
+ Serial.print("E_TIME_FOR_MVE: "); Serial.println(E_TIME_FOR_MOVE);
+ Serial.print("e_interval: "); Serial.println(e_interval);
+ Serial.println("");
+ }
+ #endif
+
+ linear_move(x_steps_to_take, y_steps_to_take, z_steps_to_take, e_steps_to_take); // make the move
}
void linear_move(unsigned long x_steps_remaining, unsigned long y_steps_remaining, unsigned long z_steps_remaining, unsigned long e_steps_remaining) // make linear move with preset speeds and destinations, see G0 and G1