summaryrefslogtreecommitdiff
path: root/Tonokip_Firmware/pins.h
diff options
context:
space:
mode:
Diffstat (limited to 'Tonokip_Firmware/pins.h')
-rw-r--r--Tonokip_Firmware/pins.h288
1 files changed, 288 insertions, 0 deletions
diff --git a/Tonokip_Firmware/pins.h b/Tonokip_Firmware/pins.h
new file mode 100644
index 0000000..a585233
--- /dev/null
+++ b/Tonokip_Firmware/pins.h
@@ -0,0 +1,288 @@
+#ifndef PINS_H
+#define PINS_H
+
+/****************************************************************************************
+* Arduino pin assignment
+*
+* ATMega168
+* +-\/-+
+* PC6 1| |28 PC5 (AI 5 / D19)
+* (D 0) PD0 2| |27 PC4 (AI 4 / D18)
+* (D 1) PD1 3| |26 PC3 (AI 3 / D17)
+* (D 2) PD2 4| |25 PC2 (AI 2 / D16)
+* PWM+ (D 3) PD3 5| |24 PC1 (AI 1 / D15)
+* (D 4) PD4 6| |23 PC0 (AI 0 / D14)
+* VCC 7| |22 GND
+* GND 8| |21 AREF
+* PB6 9| |20 AVCC
+* PB7 10| |19 PB5 (D 13)
+* PWM+ (D 5) PD5 11| |18 PB4 (D 12)
+* PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM
+* (D 7) PD7 13| |16 PB2 (D 10) PWM
+* (D 8) PB0 14| |15 PB1 (D 9) PWM
+* +----+
+****************************************************************************************/
+#if MOTHERBOARD == 0
+#ifndef __AVR_ATmega168__
+#error Oops! Make sure you have 'Arduino Diecimila' selected from the boards menu.
+#endif
+
+#define X_STEP_PIN (byte)2
+#define X_DIR_PIN (byte)3
+#define X_ENABLE_PIN (byte)-1
+#define X_MIN_PIN (byte)4
+#define X_MAX_PIN (byte)9
+
+#define Y_STEP_PIN (byte)10
+#define Y_DIR_PIN (byte)7
+#define Y_ENABLE_PIN (byte)-1
+#define Y_MIN_PIN (byte)8
+#define Y_MAX_PIN (byte)13
+
+#define Z_STEP_PIN (byte)19
+#define Z_DIR_PIN (byte)18
+#define Z_ENABLE_PIN (byte)5
+#define Z_MIN_PIN (byte)17
+#define Z_MAX_PIN (byte)16
+
+#define E_STEP_PIN (byte)11
+#define E_DIR_PIN (byte)12
+#define E_ENABLE_PIN (byte)-1
+
+#define LED_PIN (byte)-1
+#define FAN_PIN (byte)-1
+#define PS_ON_PIN (byte)15
+#define KILL_PIN (byte)-1
+
+#define HEATER_0_PIN (byte)6
+#define TEMP_0_PIN (byte)0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+
+
+
+
+
+/****************************************************************************************
+* Sanguino/RepRap Motherboard with direct-drive extruders
+*
+* ATMega644P
+*
+* +---\/---+
+* (D 0) PB0 1| |40 PA0 (AI 0 / D31)
+* (D 1) PB1 2| |39 PA1 (AI 1 / D30)
+* INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29)
+* PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28)
+* PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27)
+* MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26)
+* MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25)
+* SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24)
+* RST 9| |32 AREF
+* VCC 10| |31 GND
+* GND 11| |30 AVCC
+* XTAL2 12| |29 PC7 (D 23)
+* XTAL1 13| |28 PC6 (D 22)
+* RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI
+* TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO
+* INT0 RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS
+* INT1 TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK
+* PWM (D 12) PD4 18| |23 PC1 (D 17) SDA
+* PWM (D 13) PD5 19| |22 PC0 (D 16) SCL
+* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
+* +--------+
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 1
+#ifndef __AVR_ATmega644P__
+#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN (byte)15
+#define X_DIR_PIN (byte)18
+#define X_ENABLE_PIN (byte)19
+#define X_MIN_PIN (byte)20
+#define X_MAX_PIN (byte)21
+
+#define Y_STEP_PIN (byte)23
+#define Y_DIR_PIN (byte)22
+#define Y_ENABLE_PIN (byte)19
+#define Y_MIN_PIN (byte)25
+#define Y_MAX_PIN (byte)26
+
+#define Z_STEP_PIN (byte)29
+#define Z_DIR_PIN (byte)30
+#define Z_ENABLE_PIN (byte)31
+#define Z_MIN_PIN (byte)2
+#define Z_MAX_PIN (byte)1
+
+#define E_STEP_PIN (byte)12
+#define E_DIR_PIN (byte)16
+#define E_ENABLE_PIN (byte)3
+
+#define LED_PIN (byte)0
+#define FAN_PIN (byte)-1
+#define PS_ON_PIN (byte)-1
+#define KILL_PIN (byte)-1
+
+#define HEATER_0_PIN (byte)14
+#define TEMP_0_PIN (byte)4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
+
+
+
+
+
+
+/****************************************************************************************
+* RepRap Motherboard ****---NOOOOOO RS485/EXTRUDER CONTROLLER!!!!!!!!!!!!!!!!!---*******
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 2
+#ifndef __AVR_ATmega644P__
+#error Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN 15
+#define X_DIR_PIN 18
+#define X_ENABLE_PIN 19
+#define X_MIN_PIN 20
+#define X_MAX_PIN 21
+
+#define Y_STEP_PIN 23
+#define Y_DIR_PIN 22
+#define Y_ENABLE_PIN 24
+#define Y_MIN_PIN 25
+#define Y_MAX_PIN 26
+
+#define Z_STEP_PINN 27
+#define Z_DIR_PINN 28
+#define Z_ENABLE_PIN 29
+#define Z_MIN_PIN 30
+#define Z_MAX_PIN 31
+
+#define E_STEP_PIN 17
+#define E_DIR_PIN 16
+#define E_ENABLE_PIN (byte)-1
+
+#define LED_PIN 0
+
+#define SD_CARD_WRITE 2
+#define SD_CARD_DETECT 3
+#define SD_CARD_SELECT 4
+
+//our RS485 pins
+#define TX_ENABLE_PIN 12
+#define RX_ENABLE_PIN 13
+
+//pin for controlling the PSU.
+#define PS_ON_PIN 14
+
+#define FAN_PIN (byte)-1
+#define KILL_PIN (byte)-1
+
+#define HEATER_0_PIN (byte)-1
+#define TEMP_0_PIN (byte)-1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+
+
+
+
+
+/****************************************************************************************
+* Arduino Mega pin assignment
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 3
+#ifndef __AVR_ATmega1280__
+#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN (byte)22
+#define X_DIR_PIN (byte)23
+#define X_ENABLE_PIN (byte)24
+#define X_MIN_PIN (byte)2
+#define X_MAX_PIN (byte)3
+
+#define Y_STEP_PIN (byte)25
+#define Y_DIR_PIN (byte)26
+#define Y_ENABLE_PIN (byte)27
+#define Y_MIN_PIN (byte)18
+#define Y_MAX_PIN (byte)19
+
+#define Z_STEP_PIN (byte)28
+#define Z_DIR_PIN (byte)29
+#define Z_ENABLE_PIN (byte)30
+#define Z_MIN_PIN (byte)20
+#define Z_MAX_PIN (byte)21
+
+#define E_STEP_PIN (byte)4
+#define E_DIR_PIN (byte)31
+#define E_ENABLE_PIN (byte)-1
+
+#define LED_PIN (byte)-1
+#define FAN_PIN (byte)-1
+#define PS_ON_PIN (byte)10
+#define KILL_PIN (byte)-1
+
+#define HEATER_0_PIN (byte)6
+#define TEMP_0_PIN (byte)0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+
+
+
+
+
+/****************************************************************************************
+* Duemilanove w/ ATMega328P pin assignment
+*
+****************************************************************************************/
+#elif MOTHERBOARD == 4
+#ifndef __AVR_ATmega328P__
+#error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define X_STEP_PIN (byte)19
+#define X_DIR_PIN (byte)18
+#define X_ENABLE_PIN (byte)-1
+#define X_MIN_PIN (byte)17
+#define X_MAX_PIN (byte)-1
+
+#define Y_STEP_PIN (byte)10
+#define Y_DIR_PIN (byte)7
+#define Y_ENABLE_PIN (byte)-1
+#define Y_MIN_PIN (byte)8
+#define Y_MAX_PIN (byte)-1
+
+#define Z_STEP_PIN (byte)13
+#define Z_DIR_PIN (byte)3
+#define Z_ENABLE_PIN (byte)2
+#define Z_MIN_PIN (byte)4
+#define Z_MAX_PIN (byte)-1
+
+//#define BASE_HEATER_PIN (byte)1
+//#define POWER_SUPPLY_PIN (byte)16
+
+#define E_STEP_PIN (byte)11
+#define E_DIR_PIN (byte)12
+#define E_ENABLE_PIN (byte)-1
+
+#define LED_PIN (byte)-1
+#define FAN_PIN (byte)5
+#define PS_ON_PIN (byte)-1
+#define KILL_PIN (byte)-1
+
+#define HEATER_0_PIN (byte)6
+#define TEMP_0_PIN (byte)0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
+
+
+
+
+
+
+#else
+
+#error Unknown MOTHERBOARD value in parameters.h
+
+#endif
+
+#endif
generated by cgit v1.2.1 (git 2.18.0) at 2024-09-16 06:51:37 +0000