diff options
author | Kliment Yanev <kliment.yanev@gmail.com> | 2011-10-27 21:42:02 +0200 |
---|---|---|
committer | Kliment Yanev <kliment.yanev@gmail.com> | 2011-10-27 21:42:02 +0200 |
commit | 6752615acab181186d6915a5d33b72d83ca0867b (patch) | |
tree | 10133d076405d1dfcde42eb2cdcea4a4c7584935 /Sprinter/pins.h | |
parent | b784326f1421add6add4e5812cb8562848f5a653 (diff) | |
parent | 5869358f65cb6304978d7b34faa9b5747f90a20e (diff) |
Merge branch 'master' of github.com:kliment/Sprinter into experimental
Conflicts:
Sprinter/Configuration.h
Diffstat (limited to 'Sprinter/pins.h')
-rw-r--r-- | Sprinter/pins.h | 57 |
1 files changed, 57 insertions, 0 deletions
diff --git a/Sprinter/pins.h b/Sprinter/pins.h index e88f650..2160335 100644 --- a/Sprinter/pins.h +++ b/Sprinter/pins.h @@ -694,3 +694,60 @@ const int sensitive_pins[] = {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN}; #endif + +/**************************************************************************************** +* Teensylu 0.7 pin assingments (ATMEGA90USB) +* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE! +****************************************************************************************/ +#if MOTHERBOARD == 8 +#define MOTHERBOARD 8 +#define KNOWN_BOARD 1 + + +#define X_STEP_PIN 0 +#define X_DIR_PIN 1 +#define X_ENABLE_PIN 39 +#define X_MIN_PIN 13 +#define X_MAX_PIN -1 + +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 38 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN -1 + +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 5 +#define Z_ENABLE_PIN 23 +#define Z_MIN_PIN 15 +#define Z_MAX_PIN -1 + +#define E_STEP_PIN 6 +#define E_DIR_PIN 7 +#define E_ENABLE_PIN 19 + + + +#define HEATER_0_PIN 21 // Extruder +#define HEATER_1_PIN 20 // Bed +#define FAN_PIN 22 // Fan + +#define TEMP_0_PIN 7 // Extruder +#define TEMP_1_PIN 6 // Bed + +#define SDPOWER -1 +#define SDSS 8 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 + +#ifndef SDSUPPORT +// these pins are defined in the SD library if building with SD support + #define SCK_PIN 9 + #define MISO_PIN 11 + #define MOSI_PIN 10 +#endif + +#endif + + |