summaryrefslogtreecommitdiff
path: root/Sprinter
diff options
context:
space:
mode:
Diffstat (limited to 'Sprinter')
-rw-r--r--Sprinter/Configuration.h3
-rw-r--r--Sprinter/fastio.h2
-rw-r--r--Sprinter/pins.h57
3 files changed, 60 insertions, 2 deletions
diff --git a/Sprinter/Configuration.h b/Sprinter/Configuration.h
index a3a5d59..71e0b08 100644
--- a/Sprinter/Configuration.h
+++ b/Sprinter/Configuration.h
@@ -9,7 +9,8 @@
// Gen6 = 5,
// Sanguinololu up to 1.1 = 6
// Sanguinololu 1.2 and above = 62
-// Gen Gen3 PLUS for RepRap Motherboard V1.2 = 21
+// Teensylu (at90usb) = 8
+// Gen 3 Plus = 21
// gen 3 Monolithic Electronics = 22
// Gen3 PLUS for TechZone Gen3 Remix Motherboard = 23
#define MOTHERBOARD 3
diff --git a/Sprinter/fastio.h b/Sprinter/fastio.h
index 73410cb..6b5572a 100644
--- a/Sprinter/fastio.h
+++ b/Sprinter/fastio.h
@@ -1904,7 +1904,7 @@ pins
#endif
-#if defined (__AVR_AT90USB1287__)
+#if defined (__AVR_AT90USB1287__) || defined (__AVR_AT90USB1286__)
// SPI
#define SCK DIO9
#define MISO DIO11
diff --git a/Sprinter/pins.h b/Sprinter/pins.h
index e88f650..2160335 100644
--- a/Sprinter/pins.h
+++ b/Sprinter/pins.h
@@ -694,3 +694,60 @@
const int sensitive_pins[] = {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN};
#endif
+
+/****************************************************************************************
+* Teensylu 0.7 pin assingments (ATMEGA90USB)
+* Requires the Teensyduino software with Teensy2.0++ selected in arduino IDE!
+****************************************************************************************/
+#if MOTHERBOARD == 8
+#define MOTHERBOARD 8
+#define KNOWN_BOARD 1
+
+
+#define X_STEP_PIN 0
+#define X_DIR_PIN 1
+#define X_ENABLE_PIN 39
+#define X_MIN_PIN 13
+#define X_MAX_PIN -1
+
+#define Y_STEP_PIN 2
+#define Y_DIR_PIN 3
+#define Y_ENABLE_PIN 38
+#define Y_MIN_PIN 14
+#define Y_MAX_PIN -1
+
+#define Z_STEP_PIN 4
+#define Z_DIR_PIN 5
+#define Z_ENABLE_PIN 23
+#define Z_MIN_PIN 15
+#define Z_MAX_PIN -1
+
+#define E_STEP_PIN 6
+#define E_DIR_PIN 7
+#define E_ENABLE_PIN 19
+
+
+
+#define HEATER_0_PIN 21 // Extruder
+#define HEATER_1_PIN 20 // Bed
+#define FAN_PIN 22 // Fan
+
+#define TEMP_0_PIN 7 // Extruder
+#define TEMP_1_PIN 6 // Bed
+
+#define SDPOWER -1
+#define SDSS 8
+#define LED_PIN -1
+#define PS_ON_PIN -1
+#define KILL_PIN -1
+
+#ifndef SDSUPPORT
+// these pins are defined in the SD library if building with SD support
+ #define SCK_PIN 9
+ #define MISO_PIN 11
+ #define MOSI_PIN 10
+#endif
+
+#endif
+
+