summaryrefslogtreecommitdiff
path: root/Sprinter
AgeCommit message (Expand)Author
2012-04-24Extra Retract Feedrate for Extrudermidopple
2012-04-24Fix typo in Parameteroutputmidopple
2012-04-23Ignore ":" in comments.midopple
2012-04-22Version 1.3.15Tmidopple
2012-04-20When endstop is hit count virtual steps, so the print lose no position when e...midopple
2012-04-20- Extrudmultiply with code M221 Sxxx (S100 original Extrude value)midopple
2012-04-02Fixed small bug in arcs when segemnts are zeromidopple
2012-04-01Merge pull request #161 from se5a/masterkliment
2012-04-02Added M93 command. sends current steps for all axis se5a
2012-03-30Merge pull request #160 from kliment/masterkliment
2012-03-30Command M106 / M107 for control the fan can use PWM midopple
2012-03-30Command M106 / M107 for control the fan can use PWM midopple
2012-03-28Merge from experimental, thanks to triffid_huntermidopple
2012-03-28fix enable_endstops being used before its definitionMichael Moon
2012-03-27Fixed arc offsetmidopple
2012-03-27Set the defaults for the heart of the sun...uhm, set default board to 33Kliment Yanev
2012-03-23First char '#' was unicode so linux give an compile errormidopple
2012-03-19Fixes virtual endstops when using mixed physical endstop positions.midopple
2012-03-19Merge commit pins.h from master to experimentellmidopple
2012-03-19Version 1.3.11Tmidopple
2012-03-19fix for broken include in store_eeprom.cppmidopple
2012-03-19Make fastio & Arduino pin numbering consistent for AT90USB128x.midopple
2012-03-17Make fastio & Arduino pin numbering consistent for AT90USB128xlincomatic
2012-03-14ENDSTOPS_ONLY_FOR_HOMING Option ignore Endstop always --> fault is cleared midopple
2012-03-13Add info to GEN7 Pinsmidopple
2012-03-13Update pins.h for gen7, working setup for 20MHzChristian Metzen
2012-03-12calculate feedrate without extrude before planner block is setmidopple
2012-03-10New Board --> GEN7 @ 20 Mhzmidopple
2012-03-04Merge commit 'from changwoo/arduino-1.0-compatibility' into experimentalmidopple
2012-03-04Move SLOWDOWN Funktion up, at the current position does not workmidopple
2012-03-05Correct SD for Arduino 1.0 compatibilityChangwoo Ryu
2012-02-24Merge commit '89180de4bfd598298f4d5e77889c57a250e35084' into experimentalmidopple
2012-02-24If a line starts with ';', it is ignored but comment_mode is reset.midopple
2012-02-24Version 1.3.07Tmidopple
2012-02-24Remove unused function "st_set_position"midopple
2012-02-24Add "store_eeprom.cpp" to makefilemidopple
2012-02-24fix applet/core.a: not found --> Thanks to triffidmidopple
2012-02-24Changhe PWM Value from INT to unsigned char, is faster for interruptmidopple
2012-02-24compile experimental using the MakefileJoachim Schleicher
2012-02-23fix comment mode.Joachim Schleicher
2012-02-23compile experimental using the MakefileJoachim Schleicher
2012-02-23Thermistortable temptable_4 midopple
2012-02-22fix applet/core.a: not foundMichael Moon
2012-02-17The microcontroller can store settings to EEPROMmidopple
2012-02-15- changed homing function to not conflict with min_software_endstops/max_soft...midopple
2012-02-15Standardvalue MAX Feed Rate for Z-Axis reduced to 2 mm/s some Printers had pr...midopple
2012-02-14Changed check in arc_funcmidopple
2012-02-13changed homing function to not conflict with min_software_endstops/max_softwa...Vyacheslav Kononenko
2012-02-06Add pin definition for the Printrboard Rev B --> Thaks to lwalkeramidopple
2012-02-05Add pin definition for the Printrboard Rev BLaine Walker-Avina
generated by cgit v1.2.1 (git 2.18.0) at 2024-05-21 17:08:12 +0000