summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2011-03-24build: treat opaque-lsa default correctly for ospfapiGreg Troxel
In deciding whether to default ospfapi to on or off, use the same rule for opaque-lsa as earlier: != no rather than = yes, so that not having set it implies yes.
2011-03-22build: change sense of opaque-{lsa,te} enable args to enable by defaultPaul Jakma
* configure.ac: (AC_ARG_ENABLE({ospf-te,opaque-lsa})) reverse the sense to --disable (enable_{opaque_lsa,ospf_te}) treat as enabled unless explicitly disabled.
2011-03-21release: 0.99.18Paul Jakma
* configure.ac: Bump to 0.99.18
2010-08-19release: 0.99.17Denis Ovsienko
* configure.ac: bump up version number
2010-04-28isisd: change ISIS_METHOD to use C preprocessorDavid Lamparter
this fixes warnings from vtysh extract.pl by making sure the isis method files always 'work'. (previously, extract.pl would grab unselected isis method sources and then complain about missing headers)
2010-03-09release: 0.99.16Denis Ovsienko
* configure.ac: bump up version number
2009-12-03configure: fix spellingDavid Ward
2009-11-05configure: fix HAVE_CLOCK_MONOTONIC spellingDmitry Tejblum
2009-08-28release: 0.99.15Paul Jakma
* configure.ac: Bump to 0.99.15
2009-07-21[build] Bump release to 0.99.14Paul Jakma
2009-07-19[build] fix default CFLAGS and squish warningPaul Jakma
* configure.ac: Move down the AC_SYS_LARGEFILE test - it was setting CFLAGS and so disabling the default CFLAGS setting section. Squish warning by adding AC_CONFIG_MACRO_DIR on the reccommendation of autoreconf.
2009-06-25[doc] Add "--disable-doc" to configureJoakim Tjernlund
Configure option "--disable-doc" will prevent building the documents under doc. Saves build time and the need to have document building tools installed. Useful when your build machine is different from your development machine.
2009-06-24[configure] Allow for large-file support, e.g. for log files >2GBTomasz Pala
2009-06-22[doc] remove -dither arg to imagemagick, in building PDFsPaul Jakma
* doc/Makefile.am: arguments for the 'convert' programme seem to have changed incompatibly at some stage - just remove the problematic -dither.
2009-06-19[configure] fix check for GNU awk/gawk to abort ./configure if missingJeremy Jackson
It also prints what were comments explaining why gawk is necessary, and not-in-PATH to help user figure out why it's not found. Build was mysteriously failing with the old version of this check when gawk wasn't installed.
2009-06-19[configure] remove unused/broken autoconf cache variable ac_statedirJeremy Jackson
It wasn't used, and the code wasn't printing progress or the result in some cases. the test uses minimal resources, so it's probably better to not cache so as to avoid inconsistencies if --with-prefix or directory variables are changed between ./configure runs.
2009-06-19[configure/cleanup] fix broken autoconf cache variablesJeremy Jackson
Fix zebra_rtread and zebra_ipforward_path. It looks like someone tried to make this cached, but it was being ignored at least on autoconf 2.6.1. 2.6.2 now gives a warning about the situation, hence this fix. Although they are just warnings, it's dangerous to leave them as-is, because someone not diligent in reading the autoconf manual might just stick _cv_ in the name, with the effect that running a ./configure --config-cache would fail horribly, since variables are being set inside the AC_CACHE_CHECK() block that would not be seen when the variable's value was read from cache. Also added m4 quotes [] to macro arguments as autoconf manual suggests.
2009-06-19[configure] remote support for AIX, it conflicts on newer autoconfJeremy Jackson
AC_AIX and AC_GNU_SOURCE conflict > autoconf 2.53 or so, but the replacement AC_USE_SYSTEM_EXTENSIONS isn't available until later versions. So either we narrow the supported autconf version range, or disable AIX (if it has any effect), or determin that AC_AIX doesn't do anything useful anyhow.
2009-06-19[configure] add configure support for PCRE Posix libraryJeremy Jackson
Debian tried unsuccessfully to build with libpcreposix. This adds proper support to autoconf/configure.ac for it. Based on the patch by C.J. Adams-Collier in bug #483. bgpd/bgp_{regex,routemap}.h: Pull in PCRE POSIX header if available.
2009-06-18[configure] Refine CLOCK_MONOTONIC testPaul Jakma
* configure.ac: Check for the actual CLOCK_MONOTONIC symbol, as clock_gettime need not imply that clock type is supported * lib/zebra.h: use the method given in autoconf docs for sys/time.h inclusion
2009-06-18[configure] Detect support for monotonic clockStephen Hemminger
Quagga has code to support monotonic clock to avoid issues where time of day changes. The support was incomplete since it was not being detected by autoconf.
2009-06-12[bgpd] Add support for the old Linux 2.4, TCP_MD5_AUTH RFC2385 patchPaul Jakma
* configure.ac: Add a --enable-linux24-tcp-md5 argument, to compile in support for the old TCP-MD5 patch for Linux 2.4 systems. This overrides auto-detection of TCP-MD5 supported by the target system. * lib/sockopt.c: (sockopt_tcp_signature) add in a variant for the old Linux 2.4, TCP_MD5_AUTH variant of TCP-MD5 support, conditional on the previous configure arg.
2009-05-08[release] Bump version to 0.99.12Paul Jakma
2009-04-13Dmitry Tejblum <tejblum@yandex-team.ru>Denis Ovsienko
Don't enable HAVE_BSD_STRUCT_IP_MREQ_HACK for FreeBSD 7.0 and upper, because OS behaviour has changed.
2008-10-02[release] Bump version to 0.99.11Paul Jakma
2008-09-24[build] Fix --enable-pie so it can actually be disabledPaul P Komkoff Jr
Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-25Make --enable-snmp cross compile and make libcrypto optional with ↵Joakim Tjernlund
--without-crypto Autoconfig work by me, the rest was done by "Kirill K. Smirnov" <lich@math.spbu.ru>
2008-08-22[build] Linux netlink doesn't need IF_PROCStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * configure.ac: If netlink is available, then that is how the initial routes and interfaces should be read, rather than through /proc, so don't set IF_PROC. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[build] --enable...user/group didn't match help textPaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: fix AC_ARG_ENABLE argument to match help string, Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[build] Test for GNU-style PIE support in toolchain and enablePaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: add a configure flag and autoconf macro, which will determine if your toolchain supports PIE. * */Makefile.am: add corresponding CFLAGS and LDFLAGS into appropriate places. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-07-22[bgpd] Fix triggerable crash when compiled with --disable-bgp-announcePaul Jakma
2008-07-22 Paul Jakma <paul.jakma@sun.com> * HACKING: Document preference for compiler conditional code, over cpp conditional. * configure.ac: DISABLE_BGP_ANNOUNCE always should be defined. * bgp_{packet,route,advertise}.c: change to compiler testing of DISABLE_BGP_ANNOUNCE, rather than cpp. 2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp> * bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable if a bgpd was compiled with --disable-bgp-announce and if GR is advertised by peer.
2008-07-21[bgpd] TCP-MD5: password vty configuration and initial Linux supportPaul Jakma
2008-07-21 Paul Jakma <paul.jakma@sun.com> * bgp_packet.c: (bgp_open_receive) fix warning in a zlog call * bgp_vty.c: (bgp_vty_return) add return code * bgpd.c: (bgp_master_init) setup the socket list. * bgp_network.c: Remove the dual IPv4/6 socket thing for now, which was implemented by Michael, until such time as its clear its required for Linux (see sockopt comments). IPv6 support, including IPv4 sessions on AF_INET6 sockets, therefore is broken, and the '-l 0.0.0.0' arguments would need to be given to bgpd to make things work here. 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Tomohiko Kusuda <kusuda@inetcore.com> Leigh Brown <leigh@solinno.co.uk> * bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5 sockopt and bgpd. (bgp_md5_set_socket) Helper for bgp_connect (bgp_md5_set) setup TCP-MD5SIG for the given peer. (bgp_connect) call out to bgp_md5_set_socket for the outgoing connect socket. (bgp_socket) save references to the listen sockets, needed if TCP-MD5SIG is applied later or changed. * bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password' commands. * bgpd.c: (peer_{new,delete) manage TCP-MD5 password (peer_group2peer_config_copy) inherit TCP-MD5 password (peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5 passwords: applying checks, stopping peers, and trying to return errors to UI, etc. (bgp_config_write_peer) save password. Fix missing newline in writeout of neighbor ... port. 2008-07-21 Paul Jakma <paul.jakma@sun.com> * sockunion.c: ifdef out various places that converted v4mapped sockets to pure v4. Doesn't seem necessary at all, presumably a workaround for now historical inet_ntop bugs (?) 2008-07-21 Michael H. Warfield <mhw@wittsend.com> YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> * sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
2008-06-10[release] Bump version to 0.99.10Paul Jakma
2008-06-10 Paul Jakma <paul@jakma.org> * configure.ac: Bump version to 0.99.10
2008-01-11[link-detect] Improve BSD support.Andrew J. Schorr
2008-01-11 Ingo Flaschberger <if@xip.at> * configure.ac: Improve HAVE_BSD_LINK_DETECT test.
2008-01-10[link-detect] Try to get BSD link-detect to work properly.Andrew J. Schorr
2008-01-10 Ingo Flaschberger <if@xip.at> * configure.ac: Define HAVE_BSD_LINK_DETECT if <net/if_media.h> is present. * lib/zebra.h: If HAVE_BSD_LINK_DETECT is defined, include <net/if_media.h>. * zebra/ioctl.c: (if_get_flags) If HAVE_BSD_LINK_DETECT, use the SIOCGIFMEDIA ioctl to ascertain link state. * zebra/kernel_socket.c: (bsd_linkdetect_translate) New function to map the ifm_data.ifi_link_state value into the IFF_RUNNING flag. (ifm_read) Call bsd_linkdetect_translate to fix the IFF_RUNNING flag before calling if_flags_update.
2007-09-07[release] bump to 0.99.9Paul Jakma
2007-09-07 Paul Jakma <paul.jakma@sun.com> * configure.ac: Bump version to 0.99.9
2007-08-07[isisd] Add support for Solaris DLPIPaul Jakma
2007-08-07 James Carlson <james.d.carlson@sun.com> * configure.ac: Added support for separate link-layer access mechanisms in isisd. * isis_network.c: split up into isis_bpf.c, isis_dlpi.c, and isis_pfpacket.c, selected by autoconf, and added DLPI support. * (general) Fixed to allow compilation and use on Solaris.
2007-08-02Add --enable-solaris to descend into solaris-specific build directory.Greg Troxel
While it doesn't take a long time to build, this is currently the only thing in the tree that doesn't work with BSD make, and there's no reason to build solaris package control files on other systems.
2007-07-272007-07-27 Paul Jakma <paul.jakma@sun.com>Paul Jakma
* configure.ac: Bump version to 0.99.8
2007-06-252007-06-25 Hasso Tepper <hasso@quagga.net>Hasso Tepper
* configure.ac: Fix typo so it compiles again on BSD systems.
2007-06-22[build] configure needs to check for struct icmphdr for IRDPPaul Jakma
2007-06-22 Paul Jakma <paul.jakma@sun.com> * configure.ac: IRDP also depends on struct icmphdr, enabling only on in_pktinfo breaks when an OS acquires pktinfo, as Solaris NV has. Reported by Jim Carlson.
2007-05-10[autoconf] Fix missing space character in previous commitPaul Jakma
2007-05-10[autoconf] GNU_SOURCE can be defined twice, through AC_FUNC_STRNLENPaul Jakma
2007-05-10 Paul Jakma <paul.jakma@sun.com> * configure.ac: Use AC_GNU_SOURCE to define _GNU_SOURCE, rather than having lib/zebra.h do it. AC_FUNC_STRNLEN has side-effects with latest autoconf, use AC_CHECK_FUNC on strnlen instead. * lib/zebra.h: Don't try define _GNU_SOURCE, autoconf should do it.
2007-05-10[autoconf] add back check for inet_atonPaul Jakma
2007-05-10 Paul Jakma <paul.jakma@sun.com> * configure.ac: Add back check for inet_aton, which got dropped somehow in previous jumbo patch.
2007-05-10[autoconf] bugs 162,303,178: Fix 'present but can not be compiled' warningsPaul Jakma
2007-05-09 Paul Jakma <paul.jakma@sun.com> * configure.ac: sys/conf.h depends on sys/param.h, at least on FBSD 6.2. (bug #363) Should check for in_pktinfo for IRDP 2006-05-27 Paul Jakma <paul.jakma@sun.com> * configure.ac: General cleanup of header and type checks, introducing an internal define, QUAGGA_INCLUDES, to build up a list of stuff to include so as to avoid 'present but cant be compiled' warnings. Misc additional checks of things missing according to autoscan. Add LIBM, for bgpd's use of libm, so as to avoid burdening LIBS, and all the binaries, with libm linkage. Remove the bad practice of using m4 changequote(), just quote the []'s in the case statements properly. This should fix bugs 162, 303 and 178. * */*.{c,h}: Update all HAVE_* to the standard autoconf namespaced HAVE_* defines. I.e. HAVE_SA_LEN -> HAVE_STRUCT_SOCKADDR_SA_LEN, * bgpd/Makefile.am: Add LIBM to bgpd's LDADD, for pow().
2007-04-30[build] Improve portability by invoking gcc with -std=gnu99 instead of -std=c99Andrew J. Schorr
2007-04-30 Andrew J. Schorr <ajschorr@alumni.princeton.edu> * configure.ac: Change gcc CFLAGS from '-std=c99' to '-std=gnu99' to improve portability.
2007-04-29[0.99] Version bump to 0.99.7Paul Jakma
2007-04-29 Paul Jakma <paul.jakma@sun.com> * configure.ac: Bump to 0.99.7
2007-02-06use generic sed test so this works on autoconf 2.59Greg Troxel
2007-02-06Better comment explaining that GNU awk is really required.Greg Troxel
2007-02-03add AC_PROC_SEDGreg Troxel