| Age | Commit message (Collapse) | Author |
|---|
|
(This commit is based on the patch from BZ#420, and should fix that bug.)
* configure.ac: detect availability of that API
* sockopt.c (setsockopt_ipv4_multicast): use it for join/leave IPv4
multicast groups
|
|
|
|
|
|
This change is based on Xavier Beaudouin's patch (which fixes detection
of 3 config.h macros on FreeBSD without any impact to Linux build of
Quagga) and FreeBSD port patch (which fixes 5 config.h macros, but
breaks the Linux build), it fixes 5 macros and works for both FreeBSD 8
and Linux.
|
|
Recent versions of libc on Linux (Debian Testing) create lots of
compile warnings about direct usage of libutil.h
|
|
|
|
In deciding whether to default ospfapi to on or off, use the same rule
for opaque-lsa as earlier: != no rather than = yes, so that not having
set it implies yes.
|
|
* configure.ac: (AC_ARG_ENABLE({ospf-te,opaque-lsa})) reverse the sense to
--disable
(enable_{opaque_lsa,ospf_te}) treat as enabled unless explicitly disabled.
|
|
* configure.ac: Bump to 0.99.18
|
|
* configure.ac: bump up version number
|
|
this fixes warnings from vtysh extract.pl by making sure the isis method
files always 'work'. (previously, extract.pl would grab unselected isis
method sources and then complain about missing headers)
|
|
* configure.ac: bump up version number
|
|
|
|
|
|
* configure.ac: Bump to 0.99.15
|
|
|
|
* configure.ac: Move down the AC_SYS_LARGEFILE test - it was setting CFLAGS
and so disabling the default CFLAGS setting section.
Squish warning by adding AC_CONFIG_MACRO_DIR on the reccommendation of
autoreconf.
|
|
Configure option "--disable-doc" will prevent building
the documents under doc. Saves build time and the need to
have document building tools installed. Useful when your build
machine is different from your development machine.
|
|
|
|
* doc/Makefile.am: arguments for the 'convert' programme seem to have
changed incompatibly at some stage - just remove the problematic -dither.
|
|
It also prints what were comments explaining why gawk is necessary, and
not-in-PATH to help user figure out why it's not found.
Build was mysteriously failing with the old version of this check when gawk
wasn't installed.
|
|
It wasn't used, and the code wasn't printing progress or the result in some
cases. the test uses minimal resources, so it's probably better to not
cache so as to avoid inconsistencies if --with-prefix or directory variables
are changed between ./configure runs.
|
|
Fix zebra_rtread and zebra_ipforward_path.
It looks like someone tried to make this cached, but it was being ignored at
least on autoconf 2.6.1. 2.6.2 now gives a warning about the situation,
hence this fix.
Although they are just warnings, it's dangerous to leave them as-is, because
someone not diligent in reading the autoconf manual might just stick _cv_ in
the name, with the effect that running a ./configure --config-cache would
fail horribly, since variables are being set inside the AC_CACHE_CHECK()
block that would not be seen when the variable's value was read from cache.
Also added m4 quotes [] to macro arguments as autoconf manual
suggests.
|
|
AC_AIX and AC_GNU_SOURCE conflict > autoconf 2.53 or so,
but the replacement AC_USE_SYSTEM_EXTENSIONS isn't available
until later versions. So either we narrow the supported
autconf version range, or disable AIX (if it has any effect),
or determin that AC_AIX doesn't do anything useful anyhow.
|
|
Debian tried unsuccessfully to build with libpcreposix. This adds proper
support to autoconf/configure.ac for it.
Based on the patch by C.J. Adams-Collier in bug #483.
bgpd/bgp_{regex,routemap}.h: Pull in PCRE POSIX header if available.
|
|
* configure.ac: Check for the actual CLOCK_MONOTONIC symbol, as clock_gettime
need not imply that clock type is supported
* lib/zebra.h: use the method given in autoconf docs for sys/time.h
inclusion
|
|
Quagga has code to support monotonic clock to avoid issues where
time of day changes. The support was incomplete since it was not being
detected by autoconf.
|
|
* configure.ac: Add a --enable-linux24-tcp-md5 argument, to compile in
support for the old TCP-MD5 patch for Linux 2.4 systems. This overrides
auto-detection of TCP-MD5 supported by the target system.
* lib/sockopt.c: (sockopt_tcp_signature) add in a variant for the old
Linux 2.4, TCP_MD5_AUTH variant of TCP-MD5 support, conditional
on the previous configure arg.
|
|
|
|
Don't enable HAVE_BSD_STRUCT_IP_MREQ_HACK for FreeBSD 7.0 and upper,
because OS behaviour has changed.
|
|
|
|
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
--without-crypto
Autoconfig work by me, the rest was done by
"Kirill K. Smirnov" <lich@math.spbu.ru>
|
|
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com>
* configure.ac: If netlink is available, then that is how the
initial routes and interfaces should be read, rather than through
/proc, so don't set IF_PROC.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Paul P Komkoff Jr <i@stingr.net>
* configure.ac: fix AC_ARG_ENABLE argument to match help string,
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-08-13 Paul P Komkoff Jr <i@stingr.net>
* configure.ac: add a configure flag and autoconf macro, which will
determine if your toolchain supports PIE.
* */Makefile.am: add corresponding CFLAGS and LDFLAGS into
appropriate places.
Signed-off-by: Paul Jakma <paul@quagga.net>
|
|
2008-07-22 Paul Jakma <paul.jakma@sun.com>
* HACKING: Document preference for compiler conditional code, over
cpp conditional.
* configure.ac: DISABLE_BGP_ANNOUNCE always should be defined.
* bgp_{packet,route,advertise}.c: change to compiler testing of
DISABLE_BGP_ANNOUNCE, rather than cpp.
2008-07-22 MIYAJIMA Mitsuharu <miyajima.mitsuharu@anchor.jp>
* bgp_packet.c: (bgp_update_packet_eor) Fix crash triggerable
if a bgpd was compiled with --disable-bgp-announce and if GR is
advertised by peer.
|
|
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* bgp_packet.c: (bgp_open_receive) fix warning in a zlog call
* bgp_vty.c: (bgp_vty_return) add return code
* bgpd.c: (bgp_master_init) setup the socket list.
* bgp_network.c: Remove the dual IPv4/6 socket thing for now, which
was implemented by Michael, until such time as its clear its
required for Linux (see sockopt comments). IPv6 support, including
IPv4 sessions on AF_INET6 sockets, therefore is broken, and the
'-l 0.0.0.0' arguments would need to be given to bgpd to make
things work here.
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Tomohiko Kusuda <kusuda@inetcore.com>
Leigh Brown <leigh@solinno.co.uk>
* bgp_network.c: (bgp_md5_set_one) shim between libzebra tcp-md5
sockopt and bgpd.
(bgp_md5_set_socket) Helper for bgp_connect
(bgp_md5_set) setup TCP-MD5SIG for the given peer.
(bgp_connect) call out to bgp_md5_set_socket for the outgoing
connect socket.
(bgp_socket) save references to the listen sockets, needed if
TCP-MD5SIG is applied later or changed.
* bgp_vty.c: (*neighbor_password_cmd) New 'neighbor ... password'
commands.
* bgpd.c: (peer_{new,delete) manage TCP-MD5 password
(peer_group2peer_config_copy) inherit TCP-MD5 password
(peer_password_{un,}set) orchestrate the whole add/remove of TCP-MD5
passwords: applying checks, stopping peers, and trying to return
errors to UI, etc.
(bgp_config_write_peer) save password.
Fix missing newline in writeout of neighbor ... port.
2008-07-21 Paul Jakma <paul.jakma@sun.com>
* sockunion.c: ifdef out various places that converted
v4mapped sockets to pure v4. Doesn't seem necessary at all,
presumably a workaround for now historical inet_ntop bugs (?)
2008-07-21 Michael H. Warfield <mhw@wittsend.com>
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* sockopt.{c,h}: (sockopt_tcp_signature) Add TCP-MD5SIG support.
|
|
2008-06-10 Paul Jakma <paul@jakma.org>
* configure.ac: Bump version to 0.99.10
|
|
2008-01-11 Ingo Flaschberger <if@xip.at>
* configure.ac: Improve HAVE_BSD_LINK_DETECT test.
|
|
2008-01-10 Ingo Flaschberger <if@xip.at>
* configure.ac: Define HAVE_BSD_LINK_DETECT if <net/if_media.h> is
present.
* lib/zebra.h: If HAVE_BSD_LINK_DETECT is defined,
include <net/if_media.h>.
* zebra/ioctl.c: (if_get_flags) If HAVE_BSD_LINK_DETECT, use the
SIOCGIFMEDIA ioctl to ascertain link state.
* zebra/kernel_socket.c: (bsd_linkdetect_translate) New function to
map the ifm_data.ifi_link_state value into the IFF_RUNNING flag.
(ifm_read) Call bsd_linkdetect_translate to fix the IFF_RUNNING
flag before calling if_flags_update.
|
|
2007-09-07 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Bump version to 0.99.9
|
|
2007-08-07 James Carlson <james.d.carlson@sun.com>
* configure.ac: Added support for separate link-layer access
mechanisms in isisd.
* isis_network.c: split up into isis_bpf.c, isis_dlpi.c, and
isis_pfpacket.c, selected by autoconf, and added DLPI support.
* (general) Fixed to allow compilation and use on Solaris.
|
|
While it doesn't take a long time to build, this is currently the only
thing in the tree that doesn't work with BSD make, and there's no
reason to build solaris package control files on other systems.
|
|
* configure.ac: Bump version to 0.99.8
|
|
* configure.ac: Fix typo so it compiles again on BSD systems.
|
|
2007-06-22 Paul Jakma <paul.jakma@sun.com>
* configure.ac: IRDP also depends on struct icmphdr, enabling
only on in_pktinfo breaks when an OS acquires pktinfo, as
Solaris NV has. Reported by Jim Carlson.
|
|
|
|
2007-05-10 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Use AC_GNU_SOURCE to define _GNU_SOURCE, rather
than having lib/zebra.h do it.
AC_FUNC_STRNLEN has side-effects with latest autoconf, use
AC_CHECK_FUNC on strnlen instead.
* lib/zebra.h: Don't try define _GNU_SOURCE, autoconf should do it.
|
|
2007-05-10 Paul Jakma <paul.jakma@sun.com>
* configure.ac: Add back check for inet_aton, which got dropped
somehow in previous jumbo patch.
|
