summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2012-11-03build: compile tests/ by defaultDavid Lamparter
Broke the tests again... let's just build them by default so it's easier to notice. If anyone doesn't want to build tests, there's --disable-tests. NB: tests will be neither run nor installed. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-09-25build: fix autoconf multicast check on OpenBSDBrad Smith
Fix the "BSD struct ip_mreq hack" autoconf test to work with OpenBSD. Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-07-19build: fix isisd topology out of tree buildDavid Lamparter
isisd got the include directory wrong on building with a separate build directory. * configure.ac: adjust ISIS_TOPOLOGY_INCLUDES Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-07-13configure: Add --with-pkg-extra-version=VER for packagers/distributions.Joachim Nilsson
This change adds a --with-pkg-extra-version option to ./configure to allow packagers and distributions to fine tune the version displayed to the end user to assist in support. It is also very useful when reporting bugs on the official Quagga mailing lists. There are two ways of utilsing this functionality: a) ./configure --with-pkg-extra-version=-wmo1 b) EXTRAVERSION=-wmo1 ./configure The latter is a common way for many distributions to add extra version strings to signify their own patch level to a given package. Also, minor whitespace fix in configure summary. Signed-off-by: Joachim Nilsson <joachim.nilsson@westermo.se> Signed-off-by: Joachim Nilsson <troglobit@gmail.com> Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2012-06-25agentx: add AgentX support to Quagga.Vincent Bernat
--enable-snmp will enable AgentX support in Quagga. SMUX is still here and can be enabled with --enable-snmp=smux. AgentX support can be enabled with "agentx" in configuration file. As for SMUX, this command is not understood by vtysh. It can be disabled with "no agentx", though there is no real use of this since this command cannot be used with vtysh. If "agentx" and "no agentx" command were added to vtysh, it would not be possible to disable agentx support after enabling it because NetSNMP does not expose the appropriate methods for this. The internals of AgentX are hidden by NetSNMP. Therefore, we don't have a file descriptor to add to the threading system. We do not have the timers to set either. Therefore, the event loop is modified to make use of snmp_select_info() from NetSNMP. Traps are not supported yet.
2012-06-25build: use net-snmp-config to configure NetSNMPVincent Bernat
The correct method to link to NetSNMP is to use net-snmp-config (which is like pkg-config). Explicit link to libcrypto is also dropped (NetSNMP libs are linked to libcrypto, no need to link Quagga to it). Moreover, @SNMP_INCLUDES@ is dropped because useless. Due to a bug in configure.ac, it was properly populated.
2012-06-25build: only define HAVE_SNMPVincent Bernat
NetSNMP is the only SNMP implementation for Quagga. We don't need two different symbols.
2012-05-01release: 0.99.21David Lamparter
2012-05-01doc: only package man pages for daemons that are builtDavid Ward
Signed-off-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: David Lamparter <equinox@diac24.net>
2012-03-25babeld: Initial import, for Babel routing protocol.Paul Jakma
* Initial import of the Babel routing protocol, ported to Quagga. * LICENCE: Update the original LICENCE file to include all known potentially applicable copyright claims. Ask that any future contributors to babeld/ grant MIT/X11 licence to their work. * *.{c,h}: Add GPL headers, in according with the SFLC guidance on dealing with potentially mixed GPL/other licensed work, at: https://www.softwarefreedom.org/resources/2007/gpl-non-gpl-collaboration.html
2012-03-08HACKING.tex: Change to a LaTeX version of HACKINGPaul Jakma
* configure.ac: Check for latexmk and pdflatex * Makefile.am: Add a conditional target to build HACKING.pdf, as a convenience * HACKING.tex: A slightly more structured HACKING, is readable on its own. * HACKING: removed
2011-12-13build: fixup autoconf for cross-compiling (to OpenWRT)David Lamparter
MALLOC/REALLOC aren't used properly (no rpl_malloc), remove them while at it, infer some sane ipforwarding method from the OS value. (v2 on that, "==" is not a proper operator for standard "test")
2011-09-29release: 0.99.20Denis Ovsienko
2011-09-27configure: test for glibc backtrace even without glibc.Dmitrij Tejblum
Other platform may have compatible facilities.
2011-09-27lib: use "protocol-independed API" from RFC3678, if that is availableDmitrij Tejblum
(This commit is based on the patch from BZ#420, and should fix that bug.) * configure.ac: detect availability of that API * sockopt.c (setsockopt_ipv4_multicast): use it for join/leave IPv4 multicast groups
2011-09-27delete CVS keywordsDenis Ovsienko
2011-09-27configure: fix OpenPAM detectionDenis Ovsienko
2011-09-27configure: fix FreeBSD header detection (BZ#408)Denis Ovsienko
This change is based on Xavier Beaudouin's patch (which fixes detection of 3 config.h macros on FreeBSD without any impact to Linux build of Quagga) and FreeBSD port patch (which fixes 5 config.h macros, but breaks the Linux build), it fixes 5 macros and works for both FreeBSD 8 and Linux.
2011-09-27configure: dismiss libutil.hStephen Hemminger
Recent versions of libc on Linux (Debian Testing) create lots of compile warnings about direct usage of libutil.h
2011-09-26release: 0.99.19Denis Ovsienko
2011-03-24build: treat opaque-lsa default correctly for ospfapiGreg Troxel
In deciding whether to default ospfapi to on or off, use the same rule for opaque-lsa as earlier: != no rather than = yes, so that not having set it implies yes.
2011-03-22build: change sense of opaque-{lsa,te} enable args to enable by defaultPaul Jakma
* configure.ac: (AC_ARG_ENABLE({ospf-te,opaque-lsa})) reverse the sense to --disable (enable_{opaque_lsa,ospf_te}) treat as enabled unless explicitly disabled.
2011-03-21release: 0.99.18Paul Jakma
* configure.ac: Bump to 0.99.18
2010-08-19release: 0.99.17Denis Ovsienko
* configure.ac: bump up version number
2010-04-28isisd: change ISIS_METHOD to use C preprocessorDavid Lamparter
this fixes warnings from vtysh extract.pl by making sure the isis method files always 'work'. (previously, extract.pl would grab unselected isis method sources and then complain about missing headers)
2010-03-09release: 0.99.16Denis Ovsienko
* configure.ac: bump up version number
2009-12-03configure: fix spellingDavid Ward
2009-11-05configure: fix HAVE_CLOCK_MONOTONIC spellingDmitry Tejblum
2009-08-28release: 0.99.15Paul Jakma
* configure.ac: Bump to 0.99.15
2009-07-21[build] Bump release to 0.99.14Paul Jakma
2009-07-19[build] fix default CFLAGS and squish warningPaul Jakma
* configure.ac: Move down the AC_SYS_LARGEFILE test - it was setting CFLAGS and so disabling the default CFLAGS setting section. Squish warning by adding AC_CONFIG_MACRO_DIR on the reccommendation of autoreconf.
2009-06-25[doc] Add "--disable-doc" to configureJoakim Tjernlund
Configure option "--disable-doc" will prevent building the documents under doc. Saves build time and the need to have document building tools installed. Useful when your build machine is different from your development machine.
2009-06-24[configure] Allow for large-file support, e.g. for log files >2GBTomasz Pala
2009-06-22[doc] remove -dither arg to imagemagick, in building PDFsPaul Jakma
* doc/Makefile.am: arguments for the 'convert' programme seem to have changed incompatibly at some stage - just remove the problematic -dither.
2009-06-19[configure] fix check for GNU awk/gawk to abort ./configure if missingJeremy Jackson
It also prints what were comments explaining why gawk is necessary, and not-in-PATH to help user figure out why it's not found. Build was mysteriously failing with the old version of this check when gawk wasn't installed.
2009-06-19[configure] remove unused/broken autoconf cache variable ac_statedirJeremy Jackson
It wasn't used, and the code wasn't printing progress or the result in some cases. the test uses minimal resources, so it's probably better to not cache so as to avoid inconsistencies if --with-prefix or directory variables are changed between ./configure runs.
2009-06-19[configure/cleanup] fix broken autoconf cache variablesJeremy Jackson
Fix zebra_rtread and zebra_ipforward_path. It looks like someone tried to make this cached, but it was being ignored at least on autoconf 2.6.1. 2.6.2 now gives a warning about the situation, hence this fix. Although they are just warnings, it's dangerous to leave them as-is, because someone not diligent in reading the autoconf manual might just stick _cv_ in the name, with the effect that running a ./configure --config-cache would fail horribly, since variables are being set inside the AC_CACHE_CHECK() block that would not be seen when the variable's value was read from cache. Also added m4 quotes [] to macro arguments as autoconf manual suggests.
2009-06-19[configure] remote support for AIX, it conflicts on newer autoconfJeremy Jackson
AC_AIX and AC_GNU_SOURCE conflict > autoconf 2.53 or so, but the replacement AC_USE_SYSTEM_EXTENSIONS isn't available until later versions. So either we narrow the supported autconf version range, or disable AIX (if it has any effect), or determin that AC_AIX doesn't do anything useful anyhow.
2009-06-19[configure] add configure support for PCRE Posix libraryJeremy Jackson
Debian tried unsuccessfully to build with libpcreposix. This adds proper support to autoconf/configure.ac for it. Based on the patch by C.J. Adams-Collier in bug #483. bgpd/bgp_{regex,routemap}.h: Pull in PCRE POSIX header if available.
2009-06-18[configure] Refine CLOCK_MONOTONIC testPaul Jakma
* configure.ac: Check for the actual CLOCK_MONOTONIC symbol, as clock_gettime need not imply that clock type is supported * lib/zebra.h: use the method given in autoconf docs for sys/time.h inclusion
2009-06-18[configure] Detect support for monotonic clockStephen Hemminger
Quagga has code to support monotonic clock to avoid issues where time of day changes. The support was incomplete since it was not being detected by autoconf.
2009-06-12[bgpd] Add support for the old Linux 2.4, TCP_MD5_AUTH RFC2385 patchPaul Jakma
* configure.ac: Add a --enable-linux24-tcp-md5 argument, to compile in support for the old TCP-MD5 patch for Linux 2.4 systems. This overrides auto-detection of TCP-MD5 supported by the target system. * lib/sockopt.c: (sockopt_tcp_signature) add in a variant for the old Linux 2.4, TCP_MD5_AUTH variant of TCP-MD5 support, conditional on the previous configure arg.
2009-05-08[release] Bump version to 0.99.12Paul Jakma
2009-04-13Dmitry Tejblum <tejblum@yandex-team.ru>Denis Ovsienko
Don't enable HAVE_BSD_STRUCT_IP_MREQ_HACK for FreeBSD 7.0 and upper, because OS behaviour has changed.
2008-10-02[release] Bump version to 0.99.11Paul Jakma
2008-09-24[build] Fix --enable-pie so it can actually be disabledPaul P Komkoff Jr
Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-25Make --enable-snmp cross compile and make libcrypto optional with ↵Joakim Tjernlund
--without-crypto Autoconfig work by me, the rest was done by "Kirill K. Smirnov" <lich@math.spbu.ru>
2008-08-22[build] Linux netlink doesn't need IF_PROCStephen Hemminger
2008-08-16 Stephen Hemminger <stephen.hemminger@vyatta.com> * configure.ac: If netlink is available, then that is how the initial routes and interfaces should be read, rather than through /proc, so don't set IF_PROC. Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[build] --enable...user/group didn't match help textPaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: fix AC_ARG_ENABLE argument to match help string, Signed-off-by: Paul Jakma <paul@quagga.net>
2008-08-22[build] Test for GNU-style PIE support in toolchain and enablePaul P Komkoff Jr
2008-08-13 Paul P Komkoff Jr <i@stingr.net> * configure.ac: add a configure flag and autoconf macro, which will determine if your toolchain supports PIE. * */Makefile.am: add corresponding CFLAGS and LDFLAGS into appropriate places. Signed-off-by: Paul Jakma <paul@quagga.net>